Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
 "There is new support for additional on-chip devices on Apple,
  Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
  Amlogic devices.

  The Arm Morello reference platform gets a devicetree for booting in
  normal aarch64 mode. The hardware supports experimental CHERI support,
  which requires a modified kernel.

  The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
  combined FPGA with Cortex-A78 CPUs in a SoC.

  Six new ST STM32MP2 SoC variants are added. Like the earlier
  STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
  based on one or two Cortex-A35 cores but each feature a different set
  of I/O devices.

  Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
  cores

  Apple T2 is the baseboard management controller on earlier Intel CPU
  based Macs, with 16 models now gaining initial support.

  All the above come with dts files for the reference boards. In
  addition, these boards are added for the SoCs that are already
  supported:

   - The Milk-V Jupiter board based on SpacemiT K1/M1

   - NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC

   - Three boards based on 32-bit stm32mp1

   - 11 distinct board variants from Toradex and one from Variscite, all
     based on i.MX6

   - Google Pixel Pro 6 phone based on gs101 (Tensor)

   - Three additional variants of the i.MX8MP based "Skov" board

   - A second variant of the i.MX95 EVK board

   - Two boards based on Renesas SoCs

   - Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
     Reform 2' laptop"

* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
  arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
  arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
  arm64: dts: hi3660: Add property for fixing CPUIdle
  arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
  arm64: dts: marvell: Use preferred node names for "simple-bus"
  arm64: dts: marvell: Drop unused CP11X_TYPE define
  arm64: dts: marvell: Move arch timer and pmu nodes to top-level
  arm64: dts: rockchip: Fix PWM pinctrl names
  arm64: dts: rockchip: fix RK3576 SCMI clock IDs
  dt-bindings: clock: rk3576: add SCMI clocks
  arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
  arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
  arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
  arm64: dts: amd/seattle: Move and simplify fixed clocks
  arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
  arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
  arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
  arm64: dts: rockchip: Add SDHCI controller for RK3528
  arm64: dts: rockchip: Remove bluetooth node from rock-3a
  arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
  ...

39 files changed, 462 insertions, 104 deletions

diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
index dc9aab19ff11..da60e9de1cfb 100644
--- a/Documentation/devicetree/bindings/arm/apple.yaml
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -57,6 +57,25 @@ description: |
   - iPad Pro (2nd Generation) (10.5 Inch)
   - iPad Pro (2nd Generation) (12.9 Inch)
 
+  Devices based on the "T2" SoC:
+
+  - Apple T2 MacBookPro15,2 (j132)
+  - Apple T2 iMacPro1,1 (j137)
+  - Apple T2 MacBookAir8,2 (j140a)
+  - Apple T2 MacBookAir8,1 (j140k)
+  - Apple T2 MacBookPro16,1 (j152f)
+  - Apple T2 MacPro7,1 (j160)
+  - Apple T2 Macmini8,1 (j174)
+  - Apple T2 iMac20,1 (j185)
+  - Apple T2 iMac20,2 (j185f)
+  - Apple T2 MacBookPro15,4 (j213)
+  - Apple T2 MacBookPro16,2 (j214k)
+  - Apple T2 MacBookPro16,4 (j215)
+  - Apple T2 MacBookPro16,3 (j223)
+  - Apple T2 MacBookAir9,1 (j230k)
+  - Apple T2 MacBookPro15,1 (j680)
+  - Apple T2 MacBookPro15,3 (j780)
+
   Devices based on the "A11" SoC:
 
   - iPhone 8
@@ -211,6 +230,28 @@ properties:
           - const: apple,t8011
           - const: apple,arm-platform
 
+      - description: Apple T2 SoC based platforms
+        items:
+          - enum:
+              - apple,j132  # Apple T2 MacBookPro15,2 (j132)
+              - apple,j137  # Apple T2 iMacPro1,1 (j137)
+              - apple,j140a # Apple T2 MacBookAir8,2 (j140a)
+              - apple,j140k # Apple T2 MacBookAir8,1 (j140k)
+              - apple,j152f # Apple T2 MacBookPro16,1 (j152f)
+              - apple,j160  # Apple T2 MacPro7,1 (j160)
+              - apple,j174  # Apple T2 Macmini8,1 (j174)
+              - apple,j185  # Apple T2 iMac20,1 (j185)
+              - apple,j185f # Apple T2 iMac20,2 (j185f)
+              - apple,j213  # Apple T2 MacBookPro15,4 (j213)
+              - apple,j214k # Apple T2 MacBookPro16,2 (j214k)
+              - apple,j215  # Apple T2 MacBookPro16,4 (j215)
+              - apple,j223  # Apple T2 MacBookPro16,3 (j223)
+              - apple,j230k # Apple T2 MacBookAir9,1 (j230k)
+              - apple,j680  # Apple T2 MacBookPro15,1 (j680)
+              - apple,j780  # Apple T2 MacBookPro15,3 (j780)
+          - const: apple,t8012
+          - const: apple,arm-platform
+
       - description: Apple A11 SoC based platforms
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
index 673277a7a224..5001f4d5a0dc 100644
--- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -22,6 +22,11 @@ properties:
   compatible:
     items:
       - enum:
+          - apple,s5l8960x-pmgr
+          - apple,t7000-pmgr
+          - apple,s8000-pmgr
+          - apple,t8010-pmgr
+          - apple,t8015-pmgr
           - apple,t8103-pmgr
           - apple,t8112-pmgr
           - apple,t6000-pmgr
diff --git a/Documentation/devicetree/bindings/arm/arm,morello.yaml b/Documentation/devicetree/bindings/arm/arm,morello.yaml
new file mode 100644
index 000000000000..e843b97fa485
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,morello.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,morello.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Morello Platforms
+
+maintainers:
+  - Vincenzo Frascino <vincenzo.frascino@arm.com>
+
+description: |+
+  The Morello architecture is an experimental extension to Armv8.2-A,
+  which extends the AArch64 state with the principles proposed in
+  version 7 of the Capability Hardware Enhanced RISC Instructions
+  (CHERI) ISA.
+
+  ARM's Morello Platforms are built as a research project to explore
+  capability architectures based on arm.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Arm Morello System Platforms
+        items:
+          - enum:
+              - arm,morello-sdp
+              - arm,morello-fvp
+          - const: arm,morello
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 73dd73d2d4fa..2e666b2a4dcd 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -177,6 +177,7 @@ properties:
       - arm,neoverse-v2
       - arm,neoverse-v3
       - arm,neoverse-v3ae
+      - arm,rainier
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0db2cbd7891f..1b90870958a2 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -97,6 +97,7 @@ properties:
               - i2se,duckbill
               - i2se,duckbill-2
               - karo,tx28                 # Ka-Ro electronics TX28 module
+              - lwn,imx28-btt3
               - lwn,imx28-xea
               - msr,m28cu3                # M28 SoM with custom base board
               - schulercontrol,imx28-sps1
@@ -296,7 +297,6 @@ properties:
               - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
-              - toradex,apalis_imx6q      # Apalis iMX6 Modules
               - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
               - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
@@ -490,7 +490,6 @@ properties:
               - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
-              - toradex,colibri_imx6dl      # Colibri iMX6 Modules
               - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
               - vdl,lanmcu                # Van der Laan LANMCU board
               - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
@@ -688,6 +687,12 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
+      - description: i.MX6UL Variscite VAR-SOM-MX6 Boards
+        items:
+          - const: variscite,mx6ulconcerto
+          - const: variscite,var-som-imx6ul
+          - const: fsl,imx6ul
+
       - description: Kontron BL i.MX6UL (N631X S) Board
         items:
           - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
@@ -730,9 +735,6 @@ properties:
               - joz,jozacp                # JOZ Access Point
               - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
-              - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
-              - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
-              - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
               - uni-t,uti260b             # UNI-T UTi260B Thermal Camera
           - const: fsl,imx6ull
 
@@ -891,8 +893,6 @@ properties:
               - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
               - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
               - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
-              - toradex,colibri-imx7d         # Colibri iMX7D Module
-              - toradex,colibri-imx7d-emmc    # Colibri iMX7D 1GB (eMMC) Module
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board
           - const: fsl,imx7d
@@ -962,9 +962,6 @@ properties:
               - innocomm,wb15-evk         # i.MX8MM Innocomm EVK board with WB15 SoM
               - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
               - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
-              - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
-              - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
-              - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
               - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
@@ -1098,12 +1095,12 @@ properties:
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
+              - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
               - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
               - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
-              - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
-              - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
-              - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
+              - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
+              - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
               - ysoft,imx8mp-iota2-lumpy  # Y Soft i.MX8MP IOTA2 Lumpy Board
           - const: fsl,imx8mp
 
@@ -1273,8 +1270,6 @@ properties:
           - enum:
               - fsl,imx8qm-mek           # i.MX8QM MEK Board
               - fsl,imx8qm-mek-revd      # i.MX8QM MEK Rev D Board
-              - toradex,apalis-imx8      # Apalis iMX8 Modules
-              - toradex,apalis-imx8-v1.1 # Apalis iMX8 V1.1 Modules
           - const: fsl,imx8qm
 
       - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
@@ -1355,6 +1350,7 @@ properties:
       - description: i.MX95 based Boards
         items:
           - enum:
+              - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
               - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
           - const: fsl,imx95
 
@@ -1435,7 +1431,6 @@ properties:
               - fsl,vf610-twr             # VF610 Tower Board
               - lwn,bk4                   # Liebherr BK4 controller
               - phytec,vf610-cosmic       # PHYTEC Cosmic/Cosmic+ Board
-              - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
           - const: fsl,vf610
 
       - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml
index e20b5c9b16bc..99961e5282e5 100644
--- a/Documentation/devicetree/bindings/arm/google.yaml
+++ b/Documentation/devicetree/bindings/arm/google.yaml
@@ -34,10 +34,11 @@ properties:
     const: '/'
   compatible:
     oneOf:
-      - description: Google Pixel 6 / Oriole
+      - description: Google Pixel 6 or 6 Pro (Oriole or Raven)
         items:
           - enum:
               - google,gs101-oriole
+              - google,gs101-raven
           - const: google,gs101
 
   # Bootloader requires empty ect node to be present
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
index 6905d29f3108..51e1386f0e01 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -18,6 +18,7 @@ properties:
         items:
           - enum:
               - cznic,turris-mox
+              - glinet,gl-mv1000
               - globalscale,espressobin
               - marvell,armada-3720-db
               - methode,edpu
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index 538d91be8857..4bc7454a5d3a 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -23,6 +23,9 @@ properties:
 
       - description: Armada 7040 SoC
         items:
+          - enum:
+              - globalscale,mochabin
+              - marvell,armada7040-db
           - const: marvell,armada7040
           - const: marvell,armada-ap806-quad
           - const: marvell,armada-ap806
@@ -35,10 +38,32 @@ properties:
 
       - description: Armada 8040 SoC
         items:
+          - enum:
+              - iei,puzzle-m801
+              - marvell,armada8040-db
+              - solidrun,clearfog-gt-8k
           - const: marvell,armada8040
           - const: marvell,armada-ap806-quad
           - const: marvell,armada-ap806
 
+      - description: Armada 8040 SoC MACCHIATOBin Boards
+        items:
+          - enum:
+              - marvell,armada8040-mcbin-doubleshot
+              - marvell,armada8040-mcbin-singleshot
+          - const: marvell,armada8040-mcbin
+          - const: marvell,armada8040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada 8080 SoC
+        items:
+          - enum:
+              - marvell,armada-8080-db
+          - const: marvell,armada-8080
+          - const: marvell,armada-ap810-octa
+          - const: marvell,armada-ap810
+
       - description: Armada CN9130 SoC with no external CP
         items:
           - const: marvell,cn9130
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
deleted file mode 100644
index f3e9624534c6..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Marvell Armada 8KPlus Platforms Device Tree Bindings
-----------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 8KP families must carry
-the following root node property:
-
- - compatible, with one of the following values:
-
-   - "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810"
-     when the SoC being used is the Armada 8080
-
-Example:
-
-compatible = "marvell,armada-8080-db", "marvell,armada-8080",
-	     "marvell,armada-ap810-octa", "marvell,armada-ap810"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 3ce34d68c213..108ae5e0185d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -414,6 +414,11 @@ properties:
           - const: mediatek,mt8365
       - items:
           - enum:
+              - mediatek,mt8370-evk
+          - const: mediatek,mt8370
+          - const: mediatek,mt8188
+      - items:
+          - enum:
               - mediatek,mt8390-evk
           - const: mediatek,mt8390
           - const: mediatek,mt8188
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index a148ff54f2b8..295963a3cae7 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -67,6 +67,7 @@ properties:
           - arm,neoverse-v2-pmu
           - arm,neoverse-v3-pmu
           - arm,neoverse-v3ae-pmu
+          - arm,rainier-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
           - nvidia,denver-pmu
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 522a6f0450ea..650fb833d96e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -49,6 +49,11 @@ properties:
               - anbernic,rg-arc-s
           - const: rockchip,rk3566
 
+      - description: Ariaboard Photonicat
+        items:
+          - const: ariaboard,photonicat
+          - const: rockchip,rk3568
+
       - description: ArmSoM Sige5 board
         items:
           - const: armsom,sige5
@@ -178,6 +183,13 @@ properties:
           - const: engicam,px30-core
           - const: rockchip,px30
 
+      - description: Firefly iCore-3588Q-based boards
+        items:
+          - enum:
+              - mntre,reform2-rcore
+          - const: firefly,icore-3588q
+          - const: rockchip,rk3588
+
       - description: Firefly Core-3588J-based boards
         items:
           - enum:
@@ -236,6 +248,11 @@ properties:
               - firefly,roc-rk3399-pc-plus
           - const: rockchip,rk3399
 
+      - description: Firefly ROC-RK3576-PC
+        items:
+          - const: firefly,roc-rk3576-pc
+          - const: rockchip,rk3576
+
       - description: Firefly Station M2
         items:
           - const: firefly,rk3566-roc-pc
@@ -862,6 +879,11 @@ properties:
           - const: radxa,rock-4c-plus
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4D
+        items:
+          - const: radxa,rock-4d
+          - const: rockchip,rk3576
+
       - description: Radxa ROCK 4SE
         items:
           - const: radxa,rock-4se
@@ -1136,11 +1158,12 @@ properties:
           - const: xunlong,orangepi-3b
           - const: rockchip,rk3566
 
-      - description: Xunlong Orange Pi 5 Max/Plus
+      - description: Xunlong Orange Pi 5 Max/Plus/Ultra
         items:
           - enum:
               - xunlong,orangepi-5-max
               - xunlong,orangepi-5-plus
+              - xunlong,orangepi-5-ultra
           - const: rockchip,rk3588
 
       - description: Xunlong Orange Pi R1 Plus / LTS
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index d083d8ad48b7..ed97652c8492 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -21,6 +21,8 @@ properties:
               - st,stm32f4-gcan
               - st,stm32mp151-pwr-mcu
               - st,stm32mp157-syscfg
+              - st,stm32mp21-syscfg
+              - st,stm32mp23-syscfg
               - st,stm32mp25-syscfg
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index b6c56d4ce6b9..5fee2f38ff25 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -51,9 +51,16 @@ properties:
               - st,stm32mp135f-dk
           - const: st,stm32mp135
 
+      - description: ST STM32MP133 based Boards
+        items:
+          - enum:
+              - pri,prihmb   # Priva E-Measuringbox board
+          - const: st,stm32mp133
+
       - description: ST STM32MP151 based Boards
         items:
           - enum:
+              - ply,plyaqm   # Plymovent AQM board
               - prt,mecio1r0 # Protonic MECIO1r0
               - prt,mect1s   # Protonic MECT1S
               - prt,prtt1a   # Protonic PRTT1A
@@ -94,6 +101,8 @@ properties:
       - description: Octavo OSD32MP153 System-in-Package based boards
         items:
           - enum:
+              - lxa,stm32mp153c-fairytux2-gen1 # Linux Automation FairyTux 2 (Generation 1)
+              - lxa,stm32mp153c-fairytux2-gen2 # Linux Automation FairyTux 2 (Generation 2)
               - lxa,stm32mp153c-tac-gen3 # Linux Automation TAC (Generation 3)
           - const: oct,stm32mp153x-osd32
           - const: st,stm32mp153
@@ -178,9 +187,22 @@ properties:
       - description: ST STM32MP257 based Boards
         items:
           - enum:
+              - st,stm32mp257f-dk
               - st,stm32mp257f-ev1
           - const: st,stm32mp257
 
+      - description: ST STM32MP235 based Boards
+        items:
+          - enum:
+              - st,stm32mp235f-dk
+          - const: st,stm32mp235
+
+      - description: ST STM32MP215 based Boards
+        items:
+          - enum:
+              - st,stm32mp215f-dk
+          - const: st,stm32mp215
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 046536d02706..f536cdd2c1a6 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -589,6 +589,11 @@ properties:
           - const: emlid,neutis-n5h3
           - const: allwinner,sun8i-h3
 
+      - description: NetCube Systems Kumquat
+        items:
+          - const: netcube,kumquat
+          - const: allwinner,sun8i-v3s
+
       - description: NextThing Co. CHIP
         items:
           - const: nextthing,chip
diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
index 93e04a109a12..3603edd7361d 100644
--- a/Documentation/devicetree/bindings/arm/ti/omap.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -141,6 +141,13 @@ properties:
           - const: ti,omap4430
           - const: ti,omap4
 
+      - description: OMAP4 PandaBoard Revision A4 and later
+        items:
+          - const: ti,omap4-panda-a4
+          - const: ti,omap4-panda
+          - const: ti,omap4430
+          - const: ti,omap4
+
       - description: OMAP4 DuoVero with Parlor expansion board/daughter board
         items:
           - const: gumstix,omap4-duovero-parlor
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index 9952e0ef7767..6ad78429dc74 100644
--- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -163,11 +163,9 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/power/xlnx-zynqmp-power.h>
     #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
     #include <dt-bindings/phy/phy.h>
 
     sata: ahci@fd0c0000 {
@@ -175,7 +173,7 @@ examples:
         reg = <0xfd0c0000 0x200>;
         interrupt-parent = <&gic>;
         interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&zynqmp_clk SATA_REF>;
+        clocks = <&zynqmp_clk 22>;
         ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
         ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
         ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml
new file mode 100644
index 000000000000..5a3ec902351c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3528-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3528 Clock and Reset Controller
+
+maintainers:
+  - Yao Zi <ziyao@disroot.org>
+
+description: |
+  The RK3528 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example, it provides SCLK_UART0 and
+  PCLK_UART0 as well as SRST_P_UART0 and SRST_S_UART0 for the first UART
+  module.
+  Each clock is assigned an identifier, consumer nodes can use it to specify
+  the clock. All available clock and reset IDs are defined in dt-binding
+  headers.
+
+properties:
+  compatible:
+    const: rockchip,rk3528-cru
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External 24MHz oscillator clock
+      - description: >
+          50MHz clock generated by PHY module, for generating GMAC0 clocks only.
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: gmac0
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff4a0000 {
+        compatible = "rockchip,rk3528-cru";
+        reg = <0xff4a0000 0x30000>;
+        clocks = <&xin24m>, <&gmac0_clk>;
+        clock-names = "xin24m", "gmac0";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml
index 9e7944b5f13b..c15cc1752b02 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml
@@ -31,6 +31,7 @@ properties:
   compatible:
     enum:
       - samsung,exynos990-cmu-hsi0
+      - samsung,exynos990-cmu-peris
       - samsung,exynos990-cmu-top
 
   clocks:
@@ -83,6 +84,24 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos990-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS BUS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos990-cmu-top
 
     then:
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
index f448624dd779..193ddb105283 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - nvidia,tegra114-mipi
+      - nvidia,tegra124-mipi
       - nvidia,tegra210-mipi
       - nvidia,tegra186-mipi
 
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
index ac3198953b8e..b5399c65a731 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -75,7 +75,6 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
 
     fpd_dma_chan1: dma-controller@fd500000 {
       compatible = "xlnx,zynqmp-dma-1.0";
@@ -84,7 +83,7 @@ examples:
       interrupts = <0 117 0x4>;
       #dma-cells = <1>;
       clock-names = "clk_main", "clk_apb";
-      clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+      clocks = <&zynqmp_clk 19>, <&zynqmp_clk 31>;
       xlnx,bus-width = <128>;
       dma-coherent;
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
index 8cbad7e792b6..a403392fb263 100644
--- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -193,7 +193,6 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
 
     bus {
         #address-cells = <2>;
@@ -204,7 +203,7 @@ examples:
             interrupt-parent = <&gic>;
             interrupts = <0 56 4>;
             reg = <0x0 0xffa50000 0x0 0x800>;
-            clocks = <&zynqmp_clk AMS_REF>;
+            clocks = <&zynqmp_clk 70>;
             #address-cells = <1>;
             #size-cells = <1>;
             #io-channel-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 4d67ff26d445..2836e4793afc 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -103,6 +103,7 @@ select:
           - rockchip,rk3288-qos
           - rockchip,rk3368-qos
           - rockchip,rk3399-qos
+          - rockchip,rk3528-qos
           - rockchip,rk3562-qos
           - rockchip,rk3568-qos
           - rockchip,rk3576-qos
@@ -202,6 +203,7 @@ properties:
           - rockchip,rk3288-qos
           - rockchip,rk3368-qos
           - rockchip,rk3399-qos
+          - rockchip,rk3528-qos
           - rockchip,rk3562-qos
           - rockchip,rk3568-qos
           - rockchip,rk3576-qos
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index 3c30dd23cd4e..8d69846b2e09 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -197,7 +197,6 @@ examples:
     };
 
   - |
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
     #include <dt-bindings/power/xlnx-zynqmp-power.h>
     #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
     #include <dt-bindings/phy/phy.h>
@@ -210,9 +209,9 @@ examples:
                     interrupt-parent = <&gic>;
                     interrupts = <0 59 4>, <0 59 4>;
                     reg = <0x0 0xff0c0000 0x0 0x1000>;
-                    clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
-                             <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
-                             <&zynqmp_clk GEM_TSU>;
+                    clocks = <&zynqmp_clk 31>, <&zynqmp_clk 105>,
+                             <&zynqmp_clk 51>, <&zynqmp_clk 50>,
+                             <&zynqmp_clk 44>;
                     clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
                     #address-cells = <1>;
                     #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
index 59a6af735a21..6e9a670eaf56 100644
--- a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
+++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
@@ -31,6 +31,11 @@ properties:
   compatible:
     items:
       - enum:
+          - apple,s5l8960x-pmgr-pwrstate
+          - apple,t7000-pmgr-pwrstate
+          - apple,s8000-pmgr-pwrstate
+          - apple,t8010-pmgr-pwrstate
+          - apple,t8015-pmgr-pwrstate
           - apple,t8103-pmgr-pwrstate
           - apple,t8112-pmgr-pwrstate
           - apple,t6000-pmgr-pwrstate
diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml
index 52e55077af1a..077b94f10dca 100644
--- a/Documentation/devicetree/bindings/riscv/spacemit.yaml
+++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml
@@ -21,6 +21,7 @@ properties:
       - items:
           - enum:
               - bananapi,bpi-f3
+              - milkv,jupiter
           - const: spacemit,k1
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
index ebbf0c9109ce..e0f7503a9f35 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
@@ -22,7 +22,10 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a09g057-sys
+    items:
+      - enum:
+          - renesas,r9a09g047-sys # RZ/G3E
+          - renesas,r9a09g057-sys # RZ/V2H
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 225c0f07ae94..51a4c48eea6d 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -493,6 +493,13 @@ properties:
               - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
           - const: renesas,r9a07g044
 
+      - items:
+          - enum:
+              # MYIR Remi Pi SBC (MYB-YG2LX-REMI)
+              - myir,remi-pi
+          - const: renesas,r9a07g044l2
+          - const: renesas,r9a07g044
+
       - description: RZ/V2L (R9A07G054)
         items:
           - enum:
@@ -552,6 +559,15 @@ properties:
               - renesas,r9a09g057h41 # RZ/V2H
               - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
               - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support
+              - renesas,r9a09g057h45 # RZ/V2H with cryptographic extension support
+              - renesas,r9a09g057h46 # RZ/V2H with Mali-G31 + cryptographic extension support
+              - renesas,r9a09g057h48 # RZ/V2HP with Mali-G31 + Mali-C55 + cryptographic extension support
+          - const: renesas,r9a09g057
+
+      - description: Yuridenki-Shokai RZ/V2H Kakip
+        items:
+          - const: yuridenki,kakip
+          - const: renesas,r9a09g057h48
           - const: renesas,r9a09g057
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 61f38b68a4a3..2f61c1b95fea 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -15,6 +15,9 @@ properties:
       - items:
           - enum:
               - rockchip,rk3288-sgrf
+              - rockchip,rk3528-ioc-grf
+              - rockchip,rk3528-vo-grf
+              - rockchip,rk3528-vpu-grf
               - rockchip,rk3566-pipe-grf
               - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index 5b046932fbc3..f711e23c0686 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -11,11 +11,21 @@ maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
-  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
-  USI shares almost all internal circuits within each protocol, so only one
-  protocol can be chosen at a time. USI is modeled as a node with zero or more
-  child nodes, each representing a serial sub-node device. The mode setting
-  selects which particular function will be used.
+  The USI IP-core provides configurable support for serial protocols, enabling
+  different serial communication modes depending on the version.
+
+  In USIv1, configurations are available to enable either one or two protocols
+  simultaneously in select combinations - High-Speed I2C0, High-Speed
+  I2C1, SPI, UART, High-Speed I2C0 and I2C1 or both High-Speed
+  I2C1 and UART.
+
+  In USIv2, only one protocol can be active at a time, either UART, SPI, or
+  High-Speed I2C.
+
+  The USI core shares internal circuits across protocols, meaning only the
+  selected configuration is active at any given time. USI is modeled as a node
+  with zero or more child nodes, each representing a serial sub-node device. The
+  mode setting selects which particular function will be used.
 
 properties:
   $nodename:
@@ -31,6 +41,7 @@ properties:
           - const: samsung,exynos850-usi
       - enum:
           - samsung,exynos850-usi
+          - samsung,exynos8895-usi
 
   reg:
     maxItems: 1
@@ -64,7 +75,7 @@ properties:
 
   samsung,mode:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2, 3]
+    enum: [0, 1, 2, 3, 4, 5, 6]
     description:
       Selects USI function (which serial protocol to use). Refer to
       <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
@@ -101,37 +112,59 @@ required:
   - samsung,sysreg
   - samsung,mode
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos850-usi
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-usi
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI/I2C protocol
+
+        clock-names:
+          maxItems: 2
+
+        samsung,mode:
+          enum: [0, 1, 2, 3]
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos8895-usi
 
-then:
-  properties:
-    reg:
-      maxItems: 1
+    then:
+      properties:
+        reg: false
 
-    clocks:
-      items:
-        - description: Bus (APB) clock
-        - description: Operating clock for UART/SPI/I2C protocol
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI protocol
 
-    clock-names:
-      maxItems: 2
+        clock-names:
+          maxItems: 2
 
-  required:
-    - reg
-    - clocks
-    - clock-names
+        samsung,clkreq-on: false
 
-else:
-  properties:
-    reg: false
-    clocks: false
-    clock-names: false
-    samsung,clkreq-on: false
+      required:
+        - clocks
+        - clock-names
 
 additionalProperties: false
 
@@ -144,7 +177,7 @@ examples:
         compatible = "samsung,exynos850-usi";
         reg = <0x138200c0 0x20>;
         samsung,sysreg = <&sysreg_peri 0x1010>;
-        samsung,mode = <USI_V2_UART>;
+        samsung,mode = <USI_MODE_UART>;
         samsung,clkreq-on; /* needed for UART mode */
         #address-cells = <1>;
         #size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
index 131aba5ed9f4..fb5c39c79d28 100644
--- a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
+++ b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
@@ -9,8 +9,8 @@ title: Xilinx Zynq Platforms
 maintainers:
   - Michal Simek <michal.simek@amd.com>
 
-description: |
-  Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC
+description:
+  AMD/Xilinx boards with ARM 32/64bits cores
 
 properties:
   $nodename:
@@ -187,6 +187,13 @@ properties:
           - const: qemu,mbv
           - const: amd,mbv
 
+      - description: Xilinx Versal NET VN-X revA platform
+        items:
+          enum:
+            - xlnx,versal-net-vnx-revA
+            - xlnx,versal-net-vnx
+            - xlnx,versal-net
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt
deleted file mode 100644
index e6f05f2f6c4e..000000000000
--- a/Documentation/devicetree/bindings/sound/ics43432.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Invensense ICS-43432-compatible MEMS microphone with I2S output.
-
-There are no software configuration options for this device, indeed, the only
-host connection is the I2S interface. Apart from requirements on clock
-frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
-64 clock cycles in each stereo output frame; 24 of the 32 available bits
-contain audio data. A hardware pin determines if the device outputs data
-on the left or right channel of the I2S frame.
-
-Required properties:
-  - compatible: should be one of the following.
-     "invensense,ics43432": For the Invensense ICS43432
-     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
-
-Example:
-
-	ics43432: ics43432 {
-		compatible = "invensense,ics43432";
-	};
diff --git a/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml b/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
new file mode 100644
index 000000000000..7bd984817aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/invensense,ics43432.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense ICS-43432-compatible MEMS Microphone with I2S Output
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  The ICS-43432 and compatible MEMS microphones output audio over an I2S
+  interface and require no software configuration. The only host connection
+  is the I2S bus. The microphone requires an I2S clock frequency between
+  460 kHz and 3.379 MHz and 64 clock cycles per stereo frame. Each frame
+  contains 32-bit slots per channel, with 24 bits carrying audio data.
+  A hardware pin determines whether the microphone outputs audio on the
+  left or right channel of the I2S frame.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - invensense,ics43432
+      - cui,cmm-4030d-261
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ics43432: ics43432 {
+        compatible = "invensense,ics43432";
+
+        port {
+          endpoint {
+            remote-endpoint = <&i2s1_endpoint>;
+            dai-format = "i2s";
+          };
+        };
+
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
index 12c31b4b99e1..3ca9affb79a2 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
@@ -28,6 +28,7 @@ properties:
               - nvidia,tegra186-hda
               - nvidia,tegra210-hda
               - nvidia,tegra124-hda
+              - nvidia,tegra114-hda
           - const: nvidia,tegra30-hda
       - items:
           - const: nvidia,tegra132-hda
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index 04d4d3b4916d..02cf1314367b 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -65,14 +65,13 @@ allOf:
 
 examples:
   - |
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
     soc {
       #address-cells = <2>;
       #size-cells = <2>;
 
       qspi: spi@ff0f0000 {
         compatible = "xlnx,zynqmp-qspi-1.0";
-        clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+        clocks = <&zynqmp_clk 53>, <&zynqmp_clk 82>;
         clock-names = "ref_clk", "pclk";
         interrupts = <0 15 4>;
         interrupt-parent = <&gic>;
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index 00f87a558c7d..b5843f4d17d8 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -101,7 +101,6 @@ examples:
     #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
     #include <dt-bindings/power/xlnx-zynqmp-power.h>
     #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
-    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
     #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
     #include <dt-bindings/phy/phy.h>
     axi {
@@ -113,7 +112,7 @@ examples:
             #size-cells = <0x2>;
             compatible = "xlnx,zynqmp-dwc3";
             reg = <0x0 0xff9d0000 0x0 0x100>;
-            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+            clocks = <&zynqmp_clk 32>, <&zynqmp_clk 34>;
             clock-names = "bus_clk", "ref_clk";
             power-domains = <&zynqmp_firmware PD_USB_0>;
             resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index ef3143f4b794..004d3ebec091 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -106,6 +106,10 @@ properties:
       - description: USB3/SS(P) PHY
       - description: USB2/HS PHY
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Super Speed (SS) Output endpoint to a Type-C connector
+
   vusb33-supply:
     description: Regulator of USB AVDD3.3v
 
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index d4e187c78a0b..21fc6bbe954f 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -155,6 +155,18 @@ properties:
       property is used. See graph.txt
     $ref: /schemas/graph.yaml#/properties/port
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS) data bus.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) data bus.
+
   enable-manual-drd:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b5979832ddce..0ef0bc6449ec 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -147,6 +147,8 @@ patternProperties:
     description: Arctic Sand
   "^arcx,.*":
     description: arcx Inc. / Archronix Inc.
+  "^ariaboard,.*":
+    description: Shanghai Novotech Co., Ltd. (Ariaboard)
   "^aries,.*":
     description: Aries Embedded GmbH
   "^arm,.*":
@@ -1033,6 +1035,8 @@ patternProperties:
     description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
+  "^netcube,.*":
+    description: NetCube Systems Austria
   "^netgear,.*":
     description: NETGEAR
   "^netlogic,.*":
@@ -1204,6 +1208,8 @@ patternProperties:
     description: Primux Trading, S.L.
   "^probox2,.*":
     description: PROBOX2 (by W2COMP Co., Ltd.)
+  "^pri,.*":
+    description: Priva
   "^prt,.*":
     description: Protonic Holland
   "^pulsedlight,.*":
@@ -1269,7 +1275,7 @@ patternProperties:
   "^riscv,.*":
     description: RISC-V Foundation
   "^rockchip,.*":
-    description: Fuzhou Rockchip Electronics Co., Ltd
+    description: Rockchip Electronics Co., Ltd.
   "^rocktech,.*":
     description: ROCKTECH DISPLAYS LIMITED
   "^rohm,.*":
@@ -1739,6 +1745,8 @@ patternProperties:
     description: Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
   "^ysoft,.*":
     description: Y Soft Corporation a.s.
+  "^yuridenki,.*":
+    description: Yuridenki-Shokai Co. Ltd.
   "^zarlink,.*":
     description: Zarlink Semiconductor
   "^zealz,.*":