Merge branch 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap.git

36 files changed, 472 insertions, 56 deletions

diff --git a/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts
index 8390d71b000a..e70edd5274fe 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts
@@ -366,7 +366,7 @@
 			 * to NAND block 1 (NAND block 0 is not used by default)".
 			 * The same doc mentions that for ROM "Silicon Revision 2.1",
 			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
-			 * However the limitaion is left here by default for compatibility
+			 * However the limitation is left here by default for compatibility
 			 * with older silicon and because it needs new boot pin settings
 			 * not possible in stock LCDK.
 			 */
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 3a4d9204339b..498c36ccb5ea 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -88,6 +88,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 am335x-bonegreen-hdmi-00a0-dtbs := am335x-bonegreen-eco.dtb \
 	am335x-bone-hdmi-00a0.dtbo
 
+am335x-icev2-prueth-dtbs := am335x-icev2.dtb \
+	am335x-icev2-prueth-overlay.dtbo
+
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir2110.dtb \
 	am335x-baltos-ir3220.dtb \
@@ -106,6 +109,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-evmsk.dtb \
 	am335x-guardian.dtb \
 	am335x-icev2.dtb \
+	am335x-icev2-prueth.dtb \
 	am335x-lxm.dtb \
 	am335x-mba335x.dtb \
 	am335x-moxa-uc-2101.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso b/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso
new file mode 100644
index 000000000000..c0f32c889f69
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for IDK AM335x
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/clock/am3.h>
+
+&{/} {
+	/* Dual-MAC Ethernet application node on PRU-ICSS */
+	pruss_eth: pruss-eth {
+		compatible = "ti,am3359-prueth";
+		ti,prus = <&pru0>, <&pru1>;
+		sram = <&ocmcram>;
+		ti,mii-rt = <&pruss_mii_rt>;
+		ti,iep = <&pruss_iep>;
+		ti,ecap = <&pruss_ecap>;
+		interrupts = <20 2 2>, <21 3 3>;
+		interrupt-names = "rx_hp", "rx_lp";
+		interrupt-parent = <&pruss_intc>;
+
+		pinctrl-0 = <&pruss_eth_default>;
+		pinctrl-names = "default";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pruss_emac0: ethernet-port@0 {
+				reg = <0>;
+				phy-handle = <&pruss_eth0_phy>;
+				phy-mode = "mii";
+				interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			pruss_emac1: ethernet-port@1 {
+				reg = <1>;
+				phy-handle = <&pruss_eth1_phy>;
+				phy-mode = "mii";
+				interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	/* MDIO node for PRU-ICSS */
+	pruss_mdio_default: pruss-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x88c, PIN_OUTPUT | MUX_MODE5) /* (V12) gpmc_clk.pr1_mdio_mdclk */
+			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE5) /* (T13) gpmc_csn3.pr1_mdio_data */
+		>;
+	};
+
+	/* Pinmux configuration for PRU-ICSS */
+	pruss_eth_default: pruss-eth-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PIN_INPUT | MUX_MODE2) /* (R1) lcd_data0.pr1_mii_mt0_clk */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE2) /* (T2) lcd_data5.pr1_mii0_txd0 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE2) /* (T1) lcd_data4.pr1_mii0_txd1 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE2) /* (R4) lcd_data3.pr1_mii0_txd2 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE2) /* (R3) lcd_data2.pr1_mii0_txd3 */
+			AM33XX_IOPAD(0x8cc, PIN_INPUT | MUX_MODE5) /* (U4) lcd_data11.pr1_mii0_rxd0 */
+			AM33XX_IOPAD(0x8c8, PIN_INPUT | MUX_MODE5) /* (U3) lcd_data10.pr1_mii0_rxd1 */
+			AM33XX_IOPAD(0x8c4, PIN_INPUT | MUX_MODE5) /* (U2) lcd_data9.pr1_mii0_rxd2 */
+			AM33XX_IOPAD(0x8c0, PIN_INPUT | MUX_MODE5) /* (U1) lcd_data8.pr1_mii0_rxd3 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE2) /* (R2) lcd_data1.pr1_mii0_txen */
+			AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE5) /* (V4) lcd_data14.pr1_mii_mr0_clk */
+			AM33XX_IOPAD(0x8dc, PIN_INPUT | MUX_MODE5) /* (T5) lcd_data15.pr1_mii0_rxdv */
+			AM33XX_IOPAD(0x8d4, PIN_INPUT | MUX_MODE5) /* (V3) lcd_data13.pr1_mii0_rxer */
+			AM33XX_IOPAD(0x8d0, PIN_INPUT | MUX_MODE5) /* (V2) lcd_data12.pr1_mii0_rxlink */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT | MUX_MODE2) /* (V5) lcd_pclk.pr1_mii0_crs */
+
+			AM33XX_IOPAD(0x840, PIN_INPUT | MUX_MODE5) /* (R13) gpmc_a0.pr1_mii_mt1_clk */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE5) /* (R14) gpmc_a4.pr1_mii1_txd0 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE5) /* (T14) gpmc_a3.pr1_mii1_txd1 */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE5) /* (U14) gpmc_a2.pr1_mii1_txd2 */
+			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE5) /* (V14) gpmc_a1.pr1_mii1_txd3 */
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE5) /* (V16) gpmc_a8.pr1_mii1_rxd0 */
+			AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE5) /* (T15) gpmc_a7.pr1_mii1_rxd1 */
+			AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE5) /* (U15) gpmc_a6.pr1_mii1_rxd2 */
+			AM33XX_IOPAD(0x854, PIN_INPUT | MUX_MODE5) /* (V15) gpmc_a5.pr1_mii1_rxd3 */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE5) /* (U17) gpmc_wpn.pr1_mii1_txen */
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE5) /* (U16) gpmc_a9.pr1_mii_mr1_clk */
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE5) /* (T16) gpmc_a10.pr1_mii1_rxdv */
+			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE5) /* (V17) gpmc_a11.pr1_mii1_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE5) /* (U18) gpmc_be1n.pr1_mii1_rxlink */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT | MUX_MODE2) /* (R6) lcd_ac_bias_en.pr1_mii1_crs */
+		>;
+	};
+};
+
+&gpio3 {
+	mux-mii-hog {
+		status = "disabled";
+	};
+
+	mux-mii-hog-0 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+		output-low;
+		line-name = "MUX_MII_CTL1";
+	};
+};
+
+/*
+ * Disable CPSW switch node and
+ * MDIO configuration to prevent
+ * conflict with PRU-ICSS
+ */
+&mac_sw {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	status = "disabled";
+};
+
+/* PRU-ICSS MDIO configuration */
+&pruss_mdio {
+	pinctrl-0 = <&pruss_mdio_default>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>; /* PHY datasheet states 1uS min */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pruss_eth0_phy: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	pruss_eth1_phy: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index 89d16fcc773e..57a45609f9f5 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -308,7 +308,7 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,am3352-scm-conf", "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -896,6 +896,17 @@
 					reg = <0x32000 0x58>;
 				};
 
+				pruss_iep: iep@2e000 {
+					compatible = "ti,am3356-icss-iep";
+					reg = <0x2e000 0x31c>;
+					clocks = <&pruss_iepclk_mux>;
+				};
+
+				pruss_ecap: ecap@30000 {
+					compatible = "ti,pruss-ecap";
+					reg = <0x30000 0x60>;
+				};
+
 				pruss_intc: interrupt-controller@20000 {
 					compatible = "ti,pruss-intc";
 					reg = <0x20000 0x2000>;
@@ -1859,7 +1870,7 @@
 
 			gpio2: gpio@0 {
 				compatible = "ti,omap4-gpio";
-                                gpio-ranges =	<&am33xx_pinmux  0 34 18>,
+				gpio-ranges =	<&am33xx_pinmux  0 34 18>,
 						<&am33xx_pinmux 18 77  4>,
 						<&am33xx_pinmux 22 56 10>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
index 40f15da81043..a4357fa9f006 100644
--- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
@@ -213,7 +213,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
-	/* User DIP swithes [1:8] / User LEDS [1:2] */
+	/* User DIP switches [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi
index 504fa6b57d39..494f251c8e6a 100644
--- a/arch/arm/boot/dts/ti/omap/am4372.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi
@@ -476,6 +476,17 @@
 					reg = <0x32000 0x58>;
 				};
 
+				pruss1_iep: iep@2e000 {
+					compatible = "ti,am4376-icss-iep";
+					reg = <0x2e000 0x31c>;
+					clocks = <&pruss1_iepclk_mux>;
+				};
+
+				pruss1_ecap: ecap@30000 {
+					compatible = "ti,pruss-ecap";
+					reg = <0x30000 0x60>;
+				};
+
 				pruss1_intc: interrupt-controller@20000 {
 					compatible = "ti,pruss-intc";
 					reg = <0x20000 0x2000>;
diff --git a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
index 826f687c368a..2efa303d45be 100644
--- a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
@@ -168,6 +168,48 @@
 			default-state = "off";
 		};
 	};
+
+	/* Dual-MAC Ethernet application node on PRU-ICSS1 */
+	pruss1_eth: pruss1-eth {
+		compatible = "ti,am4376-prueth";
+		ti,prus = <&pru1_0>, <&pru1_1>;
+		sram = <&ocmcram>;
+		ti,mii-rt = <&pruss1_mii_rt>;
+		ti,iep = <&pruss1_iep>;
+		ti,ecap = <&pruss1_ecap>;
+		interrupts = <20 2 2>, <21 3 3>;
+		interrupt-names = "rx_hp", "rx_lp";
+		interrupt-parent = <&pruss1_intc>;
+
+		pinctrl-0 = <&pruss1_eth_default>;
+		pinctrl-names = "default";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pruss1_emac0: ethernet-port@0 {
+				reg = <0>;
+				phy-handle = <&pruss1_eth0_phy>;
+				phy-mode = "mii";
+				interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			pruss1_emac1: ethernet-port@1 {
+				reg = <1>;
+				phy-handle = <&pruss1_eth1_phy>;
+				phy-mode = "mii";
+				interrupts = <21 3 3>, <27 9 5>, <24 9 5>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -303,6 +345,52 @@
 		>;
 	};
 
+	pruss1_mdio_default: pruss1-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x88c, PIN_OUTPUT | MUX_MODE5) /* (A12) gpmc_clk.pr1_mdio_mdclk */
+			AM4372_IOPAD(0xa70, PIN_INPUT | MUX_MODE8) /* (D24) xdma_event_intr0.pr1_mdio_data */
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE7) /* (AD23) cam1_data6.gpio4[20] */
+		>;
+	};
+
+	pruss1_eth_default: pruss1-eth-default-pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x8a0, PIN_INPUT | MUX_MODE2) /* (B22) dss_data0.pr1_mii_mt0_clk */
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE2) /* (B20) dss_data5.pr1_mii0_txd0 */
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE2) /* (A20) dss_data4.pr1_mii0_txd1 */
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE2) /* (C21) dss_data3.pr1_mii0_txd2 */
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE2) /* (B21) dss_data2.pr1_mii0_txd3 */
+			AM4372_IOPAD(0x8cc, PIN_INPUT | MUX_MODE5) /* (B18) dss_data11.pr1_mii0_rxd0 */
+			AM4372_IOPAD(0x8c8, PIN_INPUT | MUX_MODE5) /* (A18) dss_data10.pr1_mii0_rxd1 */
+			AM4372_IOPAD(0x8c4, PIN_INPUT | MUX_MODE5) /* (B19) dss_data9.pr1_mii0_rxd2 */
+			AM4372_IOPAD(0x8c0, PIN_INPUT | MUX_MODE5) /* (A19) dss_data8.pr1_mii0_rxd3 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE2) /* (A21) dss_data1.pr1_mii0_txen */
+			AM4372_IOPAD(0x8d8, PIN_INPUT | MUX_MODE5) /* (C17) dss_data14.pr1_mii_mr0_clk */
+			AM4372_IOPAD(0x8dc, PIN_INPUT | MUX_MODE5) /* (D17) dss_data15.pr1_mii0_rxdv */
+			AM4372_IOPAD(0x8d4, PIN_INPUT | MUX_MODE5) /* (D19) dss_data13.pr1_mii0_rxer */
+			AM4372_IOPAD(0x8d0, PIN_INPUT | MUX_MODE5) /* (C19) dss_data12.pr1_mii0_rxlink */
+			AM4372_IOPAD(0xa40, PIN_INPUT | MUX_MODE5) /* (G20) gpio5_10.pr1_mii0_crs */
+			AM4372_IOPAD(0xa38, PIN_INPUT | MUX_MODE5) /* (D25) gpio5_8.pr1_mii0_col */
+
+			AM4372_IOPAD(0x858, PIN_INPUT | MUX_MODE5) /* (E8) gpmc_a6.pr1_mii_mt1_clk */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE5) /* (E7) gpmc_a5.pr1_mii1_txd0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE5) /* (D7) gpmc_a4.pr1_mii1_txd1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE5) /* (A4) gpmc_a3.pr1_mii1_txd2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE5) /* (C6) gpmc_a2.pr1_mii1_txd3 */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE5) /* (D8) gpmc_a11.pr1_mii1_rxd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE5) /* (G8) gpmc_a10.pr1_mii1_rxd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE5) /* (B4) gpmc_a9.pr1_mii1_rxd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE5) /* (F7) gpmc_a8.pr1_mii1_rxd3 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE5) /* (C3) gpmc_a0.pr1_mii1_txen */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE5) /* (F6) gpmc_a7.pr1_mii_mr1_clk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE5) /* (C5) gpmc_a1.pr1_mii1_rxdv */
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE5) /* (B3) gpmc_wpn.pr1_mii1_rxer */
+			AM4372_IOPAD(0xa4c, PIN_INPUT | MUX_MODE5) /* (E24) gpio5_13.pr1_mii1_rxlink */
+			AM4372_IOPAD(0xa44, PIN_INPUT | MUX_MODE5) /* (F23) gpio5_11.pr1_mii1_crs */
+			AM4372_IOPAD(0x878, PIN_INPUT | MUX_MODE5) /* (A3) gpmc_be1n.pr1_mii1_col */
+		>;
+	};
+
 	qspi_pins_default: qspi-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
@@ -539,5 +627,18 @@
 };
 
 &pruss1_mdio {
-	status = "disabled";
+	pinctrl-0 = <&pruss1_mdio_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;	/* PHY datasheet states 1uS min */
+
+	pruss1_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	pruss1_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
index e08f356e71cb..30fcce33f4b7 100644
--- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
@@ -301,7 +301,7 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,am4372-scm-conf", "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
index 46c5383f0eee..f73316625608 100644
--- a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
@@ -170,6 +170,17 @@
 				};
 			};
 
+			pruss2_iep: iep@2e000 {
+				compatible = "ti,am5728-icss-iep";
+				reg = <0x2e000 0x31c>;
+				clocks = <&pruss2_iepclk_mux>;
+			};
+
+			pruss2_ecap: ecap@30000 {
+				compatible = "ti,pruss-ecap";
+				reg = <0x30000 0x60>;
+			};
+
 			pruss2_mii_rt: mii-rt@32000 {
 				compatible = "ti,pruss-mii", "syscon";
 				reg = <0x32000 0x58>;
diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 322cf79d22e9..02653b440585 100644
--- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -214,5 +214,11 @@
 };
 
 &pruss2_mdio {
-	status = "disabled";
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+};
+
+&pruss2_eth {
+	ti,pruss-gp-mux-sel = <4>,      /* MII2, needed for PRUSS1_MII0 */
+			      <4>;      /* MII2, needed for PRUSS1_MII1 */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 43cf4ade950b..76bfb364777e 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -420,7 +420,7 @@
 		st,mod-12b = <1>; /* 12-bit ADC */
 		st,ref-sel = <0>; /* internal ADC reference */
 		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
-		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+		st,sample-time = <4>; /* ADC conversion time: 80 clocks */
 
 		stmpe_adc {
 			compatible = "st,stmpe-adc";
diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk.dts b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
index 94a738cb0a4d..54a8ccb9ca14 100644
--- a/arch/arm/boot/dts/ti/omap/am572x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
@@ -28,10 +28,12 @@
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
 
-&pruss1_mdio {
-	status = "disabled";
+&pruss2_eth0_phy {
+	reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
 
-&pruss2_mdio {
-	status = "disabled";
+&pruss2_eth1_phy {
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am574x-idk.dts b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
index 47b9174d2353..47b6c6cb210c 100644
--- a/arch/arm/boot/dts/ti/omap/am574x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
@@ -40,10 +40,12 @@
 	status = "okay";
 };
 
-&pruss1_mdio {
-	status = "disabled";
+&pruss2_eth0_phy {
+	reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
 
-&pruss2_mdio {
-	status = "disabled";
+&pruss2_eth1_phy {
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
index 43e3623f079c..5eccff3bb4b6 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
@@ -155,6 +155,52 @@
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
+
+	/* Dual-MAC Ethernet application node on PRU-ICSS2 */
+	pruss2_eth: pruss2-eth {
+		compatible = "ti,am57-prueth";
+		ti,prus = <&pru2_0>, <&pru2_1>;
+		sram = <&ocmcram1>;
+		ti,mii-rt = <&pruss2_mii_rt>;
+		ti,iep = <&pruss2_iep>;
+		ti,ecap = <&pruss2_ecap>;
+		interrupts = <20 2 2>, <21 3 3>;
+		interrupt-names = "rx_hp", "rx_lp";
+		interrupt-parent = <&pruss2_intc>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pruss2_emac0: ethernet-port@0 {
+				reg = <0>;
+				phy-handle = <&pruss2_eth0_phy>;
+				phy-mode = "mii";
+				interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			pruss2_emac1: ethernet-port@1 {
+				reg = <1>;
+				phy-handle = <&pruss2_eth1_phy>;
+				phy-mode = "mii";
+				interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+};
+
+&pruss2_iep {
+	interrupt-parent = <&pruss2_intc>;
+	interrupts = <7 7 8>;
+	interrupt-names = "iep_cap_cmp";
 };
 
 &dra7_pmx_core {
@@ -606,3 +652,18 @@
 		};
 	};
 };
+
+&pruss2_mdio {
+	status = "okay";
+	pruss2_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pruss2_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
index 57a9eef09f6f..8236d9eb438a 100644
--- a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
@@ -99,7 +99,7 @@
 };
 
 &mmc1 {
-        status = "disabled";
+	status = "disabled";
 };
 
 &mmc2 {
@@ -111,7 +111,7 @@
 };
 
 &mmc3 {
-        status = "disabled";
+	status = "disabled";
 };
 
 &pincntl {
diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
index 27d1f35a31fd..9e02bfa5c3a2 100644
--- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
@@ -432,7 +432,7 @@
 				ranges = <0 0x140000 0x20000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,dm814-scm-conf", "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
index 338449b32a18..76ebc6c3c3e5 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
@@ -177,7 +177,7 @@
 		compatible = "ti,gate-clock";
 		clocks = <&sysclk2_ck>;
 		ti,bit-shift = <1>;
-                reg = <0x15dc>;
+		reg = <0x15dc>;
 	};
 
 	audio_pll_a_ck: audio_pll_a_ck@35c {
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index a1e0e904e0f0..ee0090f7aa64 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -100,7 +100,7 @@
 
 			/* Device Configuration Registers */
 			scm_conf: syscon@600 {
-				compatible = "syscon", "simple-bus";
+				compatible = "ti,dm8168-scm-conf", "syscon", "simple-bus";
 				reg = <0x600 0x110>;
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index c8d325b0f57b..a595745afe59 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -64,7 +64,7 @@
 				ranges = <0 0 0x2000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,dra7-scm-conf", "syscon", "simple-bus";
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -1695,9 +1695,9 @@
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
-			                        status = "disabled";
 				dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 				dma-names = "tx", "rx";
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
index a0c53d9c2625..28b4f12b82a7 100644
--- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -91,22 +91,22 @@
 };
 
 &cpu_alert0 {
-        temperature = <80000>; /* millicelsius */
+	temperature = <80000>; /* millicelsius */
 };
 
 &cpu0 {
-        /*
+	/*
 	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
 	 * the Motorola Android Linux v3.0.8 based kernel.
 	 */
-        operating-points = <
-	        /* kHz    uV */
+	operating-points = <
+		/* kHz    uV */
 	        300000  1025000
 	        600000  1200000
 	        800000  1313000
 	        1008000 1375000
 		1200000 1375000
-        >;
+	>;
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/ti/omap/omap2430.dtsi b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
index 222613d2a4d1..01bd471f9223 100644
--- a/arch/arm/boot/dts/ti/omap/omap2430.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
@@ -50,7 +50,7 @@
 				};
 
 				scm_conf: scm_conf@270 {
-					compatible = "syscon",
+					compatible = "ti,omap2-scm-conf", "syscon",
 						     "simple-bus";
 					reg = <0x270 0x240>;
 					#address-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
index 0e942513560d..6c4916ec41b4 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
@@ -29,7 +29,7 @@
 		>;
 	};
 
- 	hsusb0_pins: hsusb0-pins {
+	hsusb0_pins: hsusb0-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
diff --git a/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
index aa4fcdbedd8f..519f7b42a59a 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
@@ -287,7 +287,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&accelerator_pins>;
 
-                interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+		interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
 
 		/* click flags */
 		st,click-single-x;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
index 0da561a23f36..2f7a4a717359 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
@@ -103,7 +103,7 @@
 
 	backlight {
 		compatible = "gpio-backlight";
-		
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&backlight_pins>;
 		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
diff --git a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
index 981f02f088f8..35701f596972 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
@@ -134,7 +134,7 @@
 
 	backlight {
 		compatible = "gpio-backlight";
-		
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&backlight_pins>;
 		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
diff --git a/arch/arm/boot/dts/ti/omap/omap3.dtsi b/arch/arm/boot/dts/ti/omap/omap3.dtsi
index 959069e24730..447736d2e53c 100644
--- a/arch/arm/boot/dts/ti/omap/omap3.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3.dtsi
@@ -116,7 +116,7 @@
 				};
 
 				scm_conf: scm_conf@270 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,omap3-scm-conf", "syscon", "simple-bus";
 					reg = <0x270 0x330>;
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index e253e0775ea9..e11d1931c42a 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -64,6 +64,13 @@
 		};
 	};
 
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+		leds = <&led_r>, <&led_g>, <&led_b>;
+	};
+
 	cb_v18: regulator-cb-v18 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&cb_v18_pins>;
@@ -368,19 +375,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		led@0 {
+		led_g: led@0 {
 			reg = <0>;
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 		};
 
-		led@2 {
+		led_b: led@2 {
 			reg = <2>;
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 		};
 
-		led@4 {
+		led_r: led@4 {
 			reg = <4>;
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
index 4c78a0b28fab..c1afc49f456c 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
@@ -681,7 +681,7 @@
 			};
 
 			omap4_padconf_global: omap4_padconf_global@5a0 {
-				compatible = "syscon",
+				compatible = "ti,omap4-sysc-padconf-global", "syscon",
 					     "simple-bus";
 				reg = <0x5a0 0x170>;
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
index a933fe560834..70c609811d11 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
@@ -12,7 +12,7 @@
 	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
 };
 
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+/* Audio routing is different between PandaBoard4430 and PandaBoardES */
 &sound {
 	ti,model = "PandaBoardES";
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi
index 37d56b3010cf..9e04aa70f982 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi
@@ -322,4 +322,18 @@
 
 &usbhsehci {
 	phys = <&hsusb1_phy>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usbhub: hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@3 {
+			compatible = "usb424,7500";
+			reg = <3>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
index 915870eb5c99..72849e1c95b0 100644
--- a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
@@ -96,8 +96,7 @@
 				};
 
 				omap5_padconf_global: omap5_padconf_global@5a0 {
-					compatible = "syscon",
-						     "simple-bus";
+					compatible = "ti,omap5-sysc-padconf-global", "syscon", "simple-bus";
 					reg = <0x5a0 0xec>;
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -2311,7 +2310,8 @@
 				ranges = <0 0 0x60>;
 
 				scm_wkup_pad_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
+					compatible = "ti,omap5-scm-wkup-conf",
+						     "syscon", "simple-bus";
 					reg = <0x0 0x60>;
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2de547c8b901..6131cec01b0c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -149,6 +149,7 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_BRIDGE=m
 CONFIG_NET_DSA=m
 CONFIG_QRTR=m
 CONFIG_QRTR_SMD=m
@@ -288,6 +289,7 @@ CONFIG_ICPLUS_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ROCKCHIP_PHY=y
+CONFIG_DP83848_PHY=m
 CONFIG_DP83867_PHY=y
 CONFIG_CAN_AT91=m
 CONFIG_CAN_FLEXCAN=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ad5ae1636dee..f827f89567fd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -257,6 +257,9 @@ CONFIG_RXKAD=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_DRA7XX_EP=y
@@ -602,6 +605,7 @@ CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_SDHCI_OMAP=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS_MULTICOLOR=m
 CONFIG_LEDS_CPCAP=m
 CONFIG_LEDS_LM3532=m
 CONFIG_LEDS_GPIO=m
@@ -611,6 +615,7 @@ CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2606MVV=m
 CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_GROUP_MULTICOLOR=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -703,7 +708,15 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_KEY_DH_OPERATIONS=y
 CONFIG_SECURITY=y
+CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_AES_ARM_BS=m
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 974107ff18b4..03cd523dff87 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2331,13 +2331,15 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 	if (r < 0) {
 		WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 		     oh->name);
-		return 0;
+		r = 0;
+		goto out_put_node;
 	}
 
 	r = _init_clocks(oh, np);
 	if (r < 0) {
 		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
-		return -EINVAL;
+		r = -EINVAL;
+		goto out_put_node;
 	}
 
 	if (np) {
@@ -2345,13 +2347,19 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 
 		parse_module_flags(oh, np);
 		child = of_get_next_child(np, NULL);
-		if (child)
+		if (child) {
 			parse_module_flags(oh, child);
+			of_node_put(child);
+		}
 	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-	return 0;
+	r = 0;
+
+out_put_node:
+	of_node_put(bus);
+	return r;
 }
 
 /**
@@ -3608,13 +3616,13 @@ int omap_hwmod_init_module(struct device *dev,
 #ifdef CONFIG_SERIAL_EARLYCON
 static void __init omap_hwmod_setup_earlycon_flags(void)
 {
-	struct device_node *np;
+	struct device_node *np, *chosen;
 	struct omap_hwmod *oh;
 	const char *uart;
 
-	np = of_find_node_by_path("/chosen");
-	if (np) {
-		uart = of_get_property(np, "stdout-path", NULL);
+	chosen = of_find_node_by_path("/chosen");
+	if (chosen) {
+		uart = of_get_property(chosen, "stdout-path", NULL);
 		if (uart) {
 			np = of_find_node_by_path(uart);
 			if (np) {
@@ -3629,8 +3637,10 @@ static void __init omap_hwmod_setup_earlycon_flags(void)
 				if (oh)
 					oh->flags |= DEBUG_OMAPUART_FLAGS;
 			}
+			of_node_put(np);
 		}
 	}
+	of_node_put(chosen);
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index f09c9197808b..8b515f30072b 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -6,6 +6,7 @@
  * 	Santosh Shilimkar <santosh.shilimkar@ti.com>
  */
 
+#include <linux/cfi_types.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/smp_scu.h>
@@ -58,7 +59,7 @@
  * stack frame and it expects the caller to take care of it. Hence the entire
  * stack frame is saved to avoid possible stack corruption.
  */
-ENTRY(omap4_finish_suspend)
+SYM_TYPED_FUNC_START(omap4_finish_suspend)
 	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
@@ -223,7 +224,7 @@ skip_scu_gp_clear:
 	isb
 	dsb
 	ldmfd	sp!, {r4-r12, pc}
-ENDPROC(omap4_finish_suspend)
+SYM_FUNC_END(omap4_finish_suspend)
 
 /*
  * ============================
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index a5b9507de37c..e118b900c9ac 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -682,6 +682,7 @@ static struct device_node *stdout_path;
 
 static void sysc_init_stdout_path(struct sysc *ddata)
 {
+	struct device_node *chosen;
 	struct device_node *np = NULL;
 	const char *uart;
 
@@ -691,15 +692,18 @@ static void sysc_init_stdout_path(struct sysc *ddata)
 	if (stdout_path)
 		return;
 
-	np = of_find_node_by_path("/chosen");
-	if (!np)
+	chosen = of_find_node_by_path("/chosen");
+	if (!chosen)
 		goto err;
 
-	uart = of_get_property(np, "stdout-path", NULL);
-	if (!uart)
+	uart = of_get_property(chosen, "stdout-path", NULL);
+	if (!uart) {
+		of_node_put(chosen);
 		goto err;
+	}
 
 	np = of_find_node_by_path(uart);
+	of_node_put(chosen);
 	if (!np)
 		goto err;