Merge branch 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux.git

10 files changed, 298 insertions, 284 deletions

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
index d7ed497d7227..3cc6e772cc8c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
@@ -450,7 +450,7 @@
 	pdb_ti_hsc1: power-monitor@11 {
 		compatible = "ti,lm5066i";
 		reg = <0x11>;
-		shunt-resistor-micro-ohms = <763>;
+		shunt-resistor-micro-ohms = <1000>;
 	};
 
 	pdb_mps_hsc2: power-monitor@12 {
@@ -461,7 +461,7 @@
 	pdb_ti_hsc2: power-monitor@13 {
 		compatible = "ti,lm5066i";
 		reg = <0x13>;
-		shunt-resistor-micro-ohms = <294>;
+		shunt-resistor-micro-ohms = <321>;
 	};
 
 	pdb_mps_hsc3: power-monitor@14 {
@@ -472,7 +472,7 @@
 	pdb_ti_hsc3: power-monitor@15 {
 		compatible = "ti,lm5066i";
 		reg = <0x15>;
-		shunt-resistor-micro-ohms = <294>;
+		shunt-resistor-micro-ohms = <321>;
 	};
 
 	pdb_mps_hsc4: power-monitor@16 {
@@ -483,7 +483,7 @@
 	pdb_ti_hsc4: power-monitor@17 {
 		compatible = "ti,lm5066i";
 		reg = <0x17>;
-		shunt-resistor-micro-ohms = <381>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 
 	pdb_ioexp_20: gpio@20 {
@@ -578,8 +578,8 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(C, 6) IRQ_TYPE_LEVEL_LOW>;
 
 		gpio-line-names =
 			"", "", "", "",
@@ -592,7 +592,7 @@
 		pwrgd-rmc-hog {
 			gpio-hog;
 			gpios = <14 GPIO_ACTIVE_LOW>;
-			output-low;
+			output-high;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index c713cb7a6187..45ee0f2cc2bb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -9,320 +9,320 @@
 #include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
-       model = "TRANSFORMERS BMC";
-       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
-
-       aliases {
-               serial4 = &uart5;
-       };
-
-       chosen {
-               stdout-path = &uart5;
-               bootargs = "console=ttyS4,115200n8";
-       };
-
-       memory@80000000 {
-               device_type = "memory";
-               reg = <0x80000000 0x80000000>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               // UID led
-               uid {
-                       label = "UID_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
-               };
-
-               // Heart beat led
-               heartbeat {
-                       label = "HB_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-               };
-       };
+	model = "TRANSFORMERS BMC";
+	compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		// UID led
+		uid {
+			label = "UID_LED";
+			gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		// Heart beat led
+		heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &mdio0 {
-       status = "okay";
+	status = "okay";
 
-       ethphy0: ethernet-phy@0 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <1>;
-       };
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
 
 &mac3 {
-       status = "okay";
-       phy-mode = "rgmii";
-       phy-handle = <&ethphy0>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_rgmii4_default>;
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
 };
 
 &fmc {
-       status = "okay";
-
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout.dtsi"
-       };
-
-       flash@1 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc2";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-       };
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
 };
 
 &spi1 {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_spi1_default>;
-
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bios";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <1>;
-               spi-rx-bus-width = <1>;
-       };
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
 };
 
 &wdt1 {
-       status = "okay";
+	status = "okay";
 };
 
 &uart1 {
-       status = "okay";
+	status = "okay";
 };
 
 &uart5 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c0 {
-       status = "okay";
-
-       //Set bmc' slave address;
-       bmc_slave@10 {
-               compatible = "ipmb-dev";
-               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-               i2c-protocol;
-       };
+	status = "okay";
+
+	//Set bmc' slave address;
+	bmc_slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &i2c2 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c3 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
-       eeprom@50 {
-               compatible = "atmel,24c512";
-               reg = <0x50>;
-               pagesize = <128>;
-       };
+	// FRU AT24C512C-SSHM-T
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
 };
 
 &i2c5 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c6 {
-       status = "okay";
-
-       tmp75@49 {
-               compatible = "ti,tmp75";
-               reg = <0x49>;
-       };
-
-       tmp75@4f {
-               compatible = "ti,tmp75";
-               reg = <0x4f>;
-       };
-
-       tmp468@48 {
-               compatible = "ti,tmp468";
-               reg = <0x48>;
-       };
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	tmp468@48 {
+		compatible = "ti,tmp468";
+		reg = <0x48>;
+	};
 };
 
 &i2c7 {
-       status = "okay";
-       adm1278@40 {
-               compatible = "adi,adm1278";
-               reg = <0x40>;
-       };
+	status = "okay";
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
 };
 
 
 &i2c8 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
-
-       eeprom@51 {
-               compatible = "atmel,24c512";
-               reg = <0x51>;
-               pagesize = <128>;
-       };
-
-       eeprom@53 {
-               compatible = "atmel,24c512";
-               reg = <0x53>;
-               pagesize = <128>;
-       };
+	// FRU AT24C512C-SSHM-T
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+		pagesize = <128>;
+	};
 };
 
 &i2c9 {
-       // M.2
-       status = "okay";
+	// M.2
+	status = "okay";
 };
 
 &i2c10 {
-       // I2C EXPANDER
-       status = "okay";
-
-       i2c-mux@71 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x71>;
-       };
-
-       i2c-mux@73 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x73>;
-       };
+	// I2C EXPANDER
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+	};
 };
 
 &i2c11 {
-       // I2C EXPANDER
-       status = "okay";
-
-       i2c-mux@70 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x70>;
-
-               pcie_eeprom_riser1: i2c@0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-
-               pcie_eeprom_riser2: i2c@1 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <1>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-
-               pcie_eeprom_riser3: i2c@2 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <2>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-       };
+	// I2C EXPANDER
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		pcie_eeprom_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
+
+		pcie_eeprom_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
+
+		pcie_eeprom_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
+	};
 };
 
 &i2c12 {
-       status = "okay";
+	status = "okay";
 
-       psu0:psu0@58 {
-               compatible = "pmbus";
-               reg = <0x58>;
-       };
+	psu0:psu0@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
 };
 
 &gpio0 {
-       status = "okay";
-       gpio-line-names =
-       /*A0-A7*/   "","","","","","","","",
-       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
-       /*C0-C7*/   "","","","","","","","",
-       /*D0-D7*/   "","","","","","","","",
-       /*E0-E7*/   "","","","","","","","",
-       /*F0-F7*/   "","","","","power-chassis-control","","","",
-       /*G0-G7*/   "","","jtag-mux","","","","","",
-       /*H0-H7*/   "","","","","reset-button","power-button","","",
-       /*I0-I7*/   "","","","","","","","",
-       /*J0-J7*/   "","","","","","","","",
-       /*K0-K7*/   "","","","","","","","",
-       /*L0-L7*/   "","","","","","","","",
-       /*M0-M7*/   "","","","","","","","",
-       /*N0-N7*/   "","","","","","","","",
-       /*O0-O7*/   "","","","","","","","",
-       /*P0-P7*/   "","","","tck-mux","","","","",
-       /*Q0-Q7*/   "","","","","","","","",
-       /*R0-R7*/   "","","","","","","","",
-       /*S0-S7*/   "","","","","","","","",
-       /*T0-T7*/   "","","","","","","","",
-       /*U0-U7*/   "","nmi-button","","","","","","",
-       /*V0-V7*/   "","","","","power-config-full-load","","","",
-       /*W0-W7*/   "","","","","","","","",
-       /*X0-X7*/   "","","","","","","","",
-       /*Y0-Y7*/   "","","","","","","","",
-       /*Z0-Z7*/   "","","","","","","","",
-       /*AA0-AA7*/ "","","","","","","","",
-       /*AB0-AB7*/ "","","","","","","","",
-       /*AC0-AC7*/ "","","","","","","","";
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","power-chassis-control","","","",
+	/*G0-G7*/   "","","jtag-mux","","","","","",
+	/*H0-H7*/   "","","","","reset-button","power-button","","",
+	/*I0-I7*/   "","","","","","","","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","","","","","","",
+	/*O0-O7*/   "","","","","","","","",
+	/*P0-P7*/   "","","","tck-mux","","","","",
+	/*Q0-Q7*/   "","","","","","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","","","","","",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","nmi-button","","","","","","",
+	/*V0-V7*/   "","","","","power-config-full-load","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
 };
 
 &lpc_snoop {
-       status = "okay";
-       snoop-ports = <0x80>;
+	status = "okay";
+	snoop-ports = <0x80>;
 };
 
 &emmc_controller {
-       status = "okay";
+	status = "okay";
 };
 
 &emmc {
-       status = "okay";
-       non-removable;
-       max-frequency = <52000000>;
-       bus-width = <8>;
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
 };
 
 &vhub {
-       status = "okay";
-       aspeed,vhub-downstream-ports = <7>;
-       aspeed,vhub-generic-endpoints = <21>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb2ad_default>;
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
 };
 
 &rtc {
-       status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index 8a7fb55ab489..5a3e8a3941d4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -82,7 +82,7 @@
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
-        label = "bmc";
+		label = "bmc";
 #include "openbmc-flash-layout.dtsi"
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 56bb3b0444f7..edf4b74f5aba 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -517,7 +517,7 @@
 				clocks = <&syscon ASPEED_CLK_APB1>;
 				clock-names = "PCLK";
 				status = "disabled";
-                        };
+			};
 
 			uart1: serial@1e783000 {
 				compatible = "ns16550a";
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index ab3c3c5713ae..83cd10b47273 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -191,9 +191,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfb000000 0x1000>;
-			reg-names = "control", "memory";
+			reg-names = "control";
 			clocks = <&clk NPCM7XX_CLK_SPI0>;
-			clock-names = "clk_spi0";
 			status = "disabled";
 		};
 
@@ -202,9 +201,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc0000000 0x1000>;
-			reg-names = "control", "memory";
+			reg-names = "control";
 			clocks = <&clk NPCM7XX_CLK_SPI3>;
-			clock-names = "clk_spi3";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi3_pins>;
 			status = "disabled";
@@ -215,9 +213,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfb001000 0x1000>;
-			reg-names = "control", "memory";
+			reg-names = "control";
 			clocks = <&clk NPCM7XX_CLK_SPIX>;
-			clock-names = "clk_spix";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
index 41891d3aa124..4c1fc9983746 100644
--- a/arch/arm/mach-npcm/platsmp.c
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -32,6 +32,7 @@ static int npcm7xx_smp_boot_secondary(unsigned int cpu,
 		goto out;
 	}
 	gcr_base = of_iomap(gcr_np, 0);
+	of_node_put(gcr_np);
 	if (!gcr_base) {
 		pr_err("could not iomap gcr");
 		ret = -ENOMEM;
@@ -60,6 +61,7 @@ static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 	scu_base = of_iomap(scu_np, 0);
+	of_node_put(scu_np);
 	if (!scu_base) {
 		pr_err("could not iomap scu");
 		return;
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index c781190b42c5..545034ac11a0 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -59,23 +59,6 @@
 			ranges = <0x0 0x0 0xf0000000 0x00300000>,
 				<0xfff00000 0x0 0xfff00000 0x00016000>;
 
-			peci: peci-controller@100000 {
-				compatible = "nuvoton,npcm845-peci";
-				reg = <0x100000 0x1000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk NPCM8XX_CLK_APB3>;
-				cmd-timeout-ms = <1000>;
-				status = "disabled";
-			};
-
-			timer0: timer@8000 {
-				compatible = "nuvoton,npcm845-timer";
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x8000 0x1C>;
-				clocks = <&refclk>;
-				clock-names = "refclk";
-			};
-
 			serial0: serial@0 {
 				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
 				reg = <0x0 0x1000>;
@@ -139,6 +122,13 @@
 				status = "disabled";
 			};
 
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm845-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x1C>;
+				clocks = <&refclk>;
+			};
+
 			watchdog0: watchdog@801c {
 				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -162,6 +152,15 @@
 				status = "disabled";
 				clocks = <&refclk>;
 			};
+
+			peci: peci-controller@100000 {
+				compatible = "nuvoton,npcm845-peci";
+				reg = <0x100000 0x1000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM8XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
 		};
 	};
 
diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile
index b35d74592964..b5188dcde37a 100644
--- a/drivers/soc/aspeed/Makefile
+++ b/drivers/soc/aspeed/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_ASPEED_LPC_SNOOP)		+= aspeed-lpc-snoop.o
 obj-$(CONFIG_ASPEED_UART_ROUTING)	+= aspeed-uart-routing.o
 obj-$(CONFIG_ASPEED_P2A_CTRL)		+= aspeed-p2a-ctrl.o
 obj-$(CONFIG_ASPEED_SOCINFO)		+= aspeed-socinfo.o
+CONTEXT_ANALYSIS_aspeed-lpc-snoop.o	:= y
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
index 28e491fffc7d..b09dca34099f 100644
--- a/drivers/soc/aspeed/aspeed-lpc-snoop.c
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/dev_printk.h>
 #include <linux/interrupt.h>
@@ -74,7 +75,8 @@ struct aspeed_lpc_snoop_channel_cfg {
 struct aspeed_lpc_snoop_channel {
 	const struct aspeed_lpc_snoop_channel_cfg *cfg;
 	bool enabled;
-	struct kfifo		fifo;
+	spinlock_t		lock;
+	struct kfifo		fifo __guarded_by(&lock);
 	wait_queue_head_t	wq;
 	struct miscdevice	miscdev;
 };
@@ -114,6 +116,7 @@ static ssize_t snoop_file_read(struct file *file, char __user *buffer,
 				size_t count, loff_t *ppos)
 {
 	struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
+	u8 *buf __free(kfree) = NULL;
 	unsigned int copied;
 	int ret = 0;
 
@@ -125,9 +128,16 @@ static ssize_t snoop_file_read(struct file *file, char __user *buffer,
 		if (ret == -ERESTARTSYS)
 			return -EINTR;
 	}
-	ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
-	if (ret)
-		return ret;
+
+	count = min_t(size_t, count, SNOOP_FIFO_SIZE);
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	copied = kfifo_out_spinlocked(&chan->fifo, buf, count, &chan->lock);
+	if (copied && copy_to_user(buffer, buf, copied))
+		return -EFAULT;
 
 	return copied;
 }
@@ -151,11 +161,13 @@ static const struct file_operations snoop_fops = {
 /* Save a byte to a FIFO and discard the oldest byte if FIFO is full */
 static void put_fifo_with_discard(struct aspeed_lpc_snoop_channel *chan, u8 val)
 {
-	if (!kfifo_initialized(&chan->fifo))
-		return;
-	if (kfifo_is_full(&chan->fifo))
-		kfifo_skip(&chan->fifo);
-	kfifo_put(&chan->fifo, val);
+	scoped_guard(spinlock, &chan->lock) {
+		if (!kfifo_initialized(&chan->fifo))
+			return;
+		if (kfifo_is_full(&chan->fifo))
+			kfifo_skip(&chan->fifo);
+		kfifo_put(&chan->fifo, val);
+	}
 	wake_up_interruptible(&chan->wq);
 }
 
@@ -239,9 +251,11 @@ static int aspeed_lpc_enable_snoop(struct device *dev,
 	if (!channel->miscdev.name)
 		return -ENOMEM;
 
-	rc = kfifo_alloc(&channel->fifo, SNOOP_FIFO_SIZE, GFP_KERNEL);
-	if (rc)
-		return rc;
+	scoped_guard(spinlock_init, &channel->lock) {
+		rc = kfifo_alloc(&channel->fifo, SNOOP_FIFO_SIZE, GFP_KERNEL);
+		if (rc)
+			return rc;
+	}
 
 	rc = misc_register(&channel->miscdev);
 	if (rc)
diff --git a/drivers/soc/aspeed/aspeed-uart-routing.c b/drivers/soc/aspeed/aspeed-uart-routing.c
index 0191e36e66e1..b4b521b5ddf1 100644
--- a/drivers/soc/aspeed/aspeed-uart-routing.c
+++ b/drivers/soc/aspeed/aspeed-uart-routing.c
@@ -582,6 +582,7 @@ static const struct of_device_id aspeed_uart_routing_table[] = {
 	  .data = &ast2600_uart_routing_attr_group },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, aspeed_uart_routing_table);
 
 static struct platform_driver aspeed_uart_routing_driver = {
 	.driver = {