path: root/arch/mips/powertv/powertv-usb.c

/*
 *				powertv-usb.c
 *
 * Description:  ASIC-specific USB device setup and shutdown
 *
 * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
 * Copyright (C) 2009 Cisco Systems, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 *
 * Author:       Ken Eppinett
 *               David Schleef <ds@schleef.org>
 *
 * NOTE: The bootloader allocates persistent memory at an address which is
 * 16 MiB below the end of the highest address in KSEG0. All fixed
 * address memory reservations must avoid this region.
 */

#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mach-powertv/asic.h>
#include <asm/mach-powertv/interrupts.h>

/* misc_clk_ctl1 values */
#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)
#define MCC1_DIV9			(1 << 13)
#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)
#define MCC1_USB_POWERUP_SELECT		(1 << 1)
#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)

/* Possible values for clock select */
#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)
#define MCC1_USB_CLOCK_48MHZ		(1 << 4)
#define MCC1_USB_CLOCK_24MHZ		(2 << 4)
#define MCC1_USB_CLOCK_6MHZ		(3 << 4)

#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\
			 MCC1_DIV9 |				\
			 MCC1_ETHMIPS_POWERUP_SELECT |		\
			 MCC1_USB_POWERUP_SELECT |		\
			 MCC1_CLOCK108_POWERUP_SELECT)

/* misc_clk_ctl2 values */
#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)
#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)
#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)
#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)
#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)
#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)
#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)
#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)
#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)
#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)
#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)
#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)
#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)

#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
				 MCC2_ETHER125_0_CLOCK_SELECT |	\
				 MCC2_RMII_0_CLOCK_SELECT |	\
				 MCC2_GMII_TX0_CLOCK_SELECT |	\
				 MCC2_GMII_RX0_CLOCK_SELECT |	\
				 MCC2_ETHER125_1_CLOCK_SELECT |	\
				 MCC2_RMII_1_CLOCK_SELECT |	\
				 MCC2_GMII_TX1_CLOCK_SELECT |	\
				 MCC2_GMII_RX1_CLOCK_SELECT |	\
				 MCC2_ETHER125_2_CLOCK_SELECT |	\
				 MCC2_RMII_2_CLOCK_SELECT |	\
				 MCC2_GMII_TX2_CLOCK_SELECT |	\
				 MCC2_GMII_RX2_CLOCK_SELECT)

/* misc_clk_ctl2 definitions for Gaia */
#define FSX4A_REF_SELECT		(1 << 16)
#define FSX4B_REF_SELECT		(1 << 17)
#define FSX4C_REF_SELECT		(1 << 18)
#define DDR_PLL_REF_SELECT		(1 << 19)
#define MIPS_PLL_REF_SELECT		(1 << 20)

/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
#define QAM_FS_SDIV_SHIFT		29
#define QAM_FS_MD_SHIFT			24
#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */
#define QAM_FS_PE_SHIFT			8

#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
#define QAM_FS_ENABLE_PROGRAM			(1 << 4)
#define	QAM_FS_ENABLE_OUTPUT			(1 << 3)
#define	QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
#define	QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
#define QAM_FS_CHOOSE_FS			(1 << 0)

/* Definitions for fs432x4a_ctl register */
#define QAM_FS_NSDIV_54MHZ			(1 << 2)

/* Definitions for bcm1_usb2_ctl register */
#define BCM1_USB2_CTL_BISTOK				(1 << 11)
#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)
#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)
#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)
#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)
#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)
#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)

/* Definitions for crt_spare register */
#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)
#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)
#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)
#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)
#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)
#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)

/* Definitions for usb2_stbus_obc register */
#define USB_STBUS_OBC_STORE32_LOAD32			0x3

/* Definitions for usb2_stbus_mess_size register */
#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */

/* Definitions for usb2_stbus_chunk_size register */
#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */

/* Definitions for usb2_strap register */
#define USB2_STRAP_HFREQ_SELECT				0x1

/*
 * USB Host Resource Definition
 */

static struct resource ehci_resources[] = {
	{
		.parent = &asic_resource,
		.start  = 0,
		.end    = 0xff,
		.flags  = IORESOURCE_MEM,
	},
	{
		.start  = irq_usbehci,
		.end    = irq_usbehci,
		.flags  = IORESOURCE_IRQ,
	},
};

static u64 ehci_dmamask = 0xffffffffULL;

static struct platform_device ehci_device = {
	.name = "powertv-ehci",
	.id = 0,
	.num_resources = 2,
	.resource = ehci_resources,
	.dev = {
		.dma_mask = &ehci_dmamask,
		.coherent_dma_mask = 0xffffffff,
	},
};

static struct resource ohci_resources[] = {
	{
		.parent = &asic_resource,
		.start  = 0,
		.end    = 0xff,
		.flags  = IORESOURCE_MEM,
	},
	{
		.start  = irq_usbohci,
		.end    = irq_usbohci,
		.flags  = IORESOURCE_IRQ,
	},
};

static u64 ohci_dmamask = 0xffffffffULL;

static struct platform_device ohci_device = {
	.name = "powertv-ohci",
	.id = 0,
	.num_resources = 2,
	.resource = ohci_resources,
	.dev = {
		.dma_mask = &ohci_dmamask,
		.coherent_dma_mask = 0xffffffff,
	},
};

static unsigned usb_users;
static DEFINE_SPINLOCK(usb_regs_lock);

/*
 *
 * fs_update - set frequency synthesizer for USB
 * @pe_bits		Phase tap setting
 * @md_bits		Coarse selector bus for algorithm of phase tap
 * @sdiv_bits		Output divider setting
 * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
 * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
 *
 * QAM frequency selection code, which affects the frequency at which USB
 * runs. The frequency is calculated as:
 *                             2^15 * ndiv * Fin
 * Fout = ------------------------------------------------------------
 *        (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
 * where:
 * Fin		54 MHz
 * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
 * sdiv		1 << (sdiv_bits + 1)
 * ipe		Same as pe_bits
 * md		A five-bit, two's-complement integer (range [-16, 15]), which
 *		is the lower 5 bits of md_bits.
 */
static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
	u32 disable_div_by_3, u32 standby)
{
	u32 val;

	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
		(pe_bits << QAM_FS_PE_SHIFT) |
		QAM_FS_ENABLE_OUTPUT |
		standby |
		disable_div_by_3);
	asic_write(val, fs432x4b4_usb_ctl);
	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
		fs432x4b4_usb_ctl);
}

/*
 * usb_eye_configure - for optimizing the shape USB eye waveform
 * @set:	Bits to set in the register
 * @clear:	Bits to clear in the register; each bit with a one will
 *		be set in the register, zero bits will not be modified
 */
static void usb_eye_configure(u32 set, u32 clear)
{
	u32 old;

	old = asic_read(crt_spare);
	old |= set;
	old &= ~clear;
	asic_write(old, crt_spare);
}

/*
 * platform_configure_usb - usb configuration based on platform type.
 */
static void platform_configure_usb(void)
{
	u32 bcm1_usb2_ctl_value;
	enum asic_type asic_type;
	unsigned long flags;

	spin_lock_irqsave(&usb_regs_lock, flags);
	usb_users++;

	if (usb_users != 1) {
		spin_unlock_irqrestore(&usb_regs_lock, flags);
		return;
	}

	asic_type = platform_get_asic();

	switch (asic_type) {
	case ASIC_ZEUS:
		fs_update(0x0000, -15, 0x02, 0, 0);
		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
		break;

	case ASIC_CRONUS:
	case ASIC_CRONUSLITE:
		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
			QAM_FS_DISABLE_DIGITAL_STANDBY);
		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
		break;

	case ASIC_CALLIOPE:
		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
			QAM_FS_DISABLE_DIGITAL_STANDBY);

		switch (platform_get_family()) {
		case FAMILY_1500VZE:
			break;

		case FAMILY_1500VZF:
			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
				CRT_SPARE_PORT1_SHIFT_JK |
				CRT_SPARE_PORT2_FAST_EDGE |
				CRT_SPARE_PORT1_FAST_EDGE, 0);
			break;

		default:
			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
				CRT_SPARE_PORT1_SHIFT_JK, 0);
			break;
		}

		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
		break;

	case ASIC_GAIA:
		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
			QAM_FS_DISABLE_DIGITAL_STANDBY);
		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
		break;

	default:
		pr_err("Unknown ASIC type: %d\n", asic_type);
		bcm1_usb2_ctl_value = 0;
		break;
	}

	/* turn on USB power */
	asic_write(0, usb2_strap);
	/* Enable all OHCI interrupts */
	asic_write(bcm1_usb2_ctl_value, usb2_control);
	/* usb2_stbus_obc store32/load32 */
	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
	/* usb2_stbus_mess_size 2 packets */
	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
	/* usb2_stbus_chunk_size 2 packets */
	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
	spin_unlock_irqrestore(&usb_regs_lock, flags);
}

static void platform_unconfigure_usb(void)
{
	unsigned long flags;

	spin_lock_irqsave(&usb_regs_lock, flags);
	usb_users--;
	if (usb_users == 0)
		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
	spin_unlock_irqrestore(&usb_regs_lock, flags);
}

/*
 * Set up the USB EHCI interface
 */
void platform_configure_usb_ehci()
{
	platform_configure_usb();
}
EXPORT_SYMBOL(platform_configure_usb_ehci);

/*
 * Set up the USB OHCI interface
 */
void platform_configure_usb_ohci()
{
	platform_configure_usb();
}
EXPORT_SYMBOL(platform_configure_usb_ohci);

/*
 * Shut the USB EHCI interface down
 */
void platform_unconfigure_usb_ehci()
{
	platform_unconfigure_usb();
}
EXPORT_SYMBOL(platform_unconfigure_usb_ehci);

/*
 * Shut the USB OHCI interface down
 */
void platform_unconfigure_usb_ohci()
{
	platform_unconfigure_usb();
}
EXPORT_SYMBOL(platform_unconfigure_usb_ohci);

/**
 * platform_devices_init - sets up USB device resourse.
 */
int __init platform_usb_devices_init(struct platform_device **ehci_dev,
	struct platform_device **ohci_dev)
{
	*ehci_dev = &ehci_device;
	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
	ehci_resources[0].end += ehci_resources[0].start;

	*ohci_dev = &ohci_device;
	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
	ohci_resources[0].end += ohci_resources[0].start;

	return 0;
}