path: root/Documentation/filesystems/ext4/ondisk/journal.rst

.. SPDX-License-Identifier: GPL-2.0

Journal (jbd2)
--------------

Introduced in ext3, the ext4 filesystem employs a journal to protect the
filesystem against corruption in the case of a system crash. A small
continuous region of disk (default 128MiB) is reserved inside the
filesystem as a place to land “important” data writes on-disk as quickly
as possible. Once the important data transaction is fully written to the
disk and flushed from the disk write cache, a record of the data being
committed is also written to the journal. At some later point in time,
the journal code writes the transactions to their final locations on
disk (this could involve a lot of seeking or a lot of small
read-write-erases) before erasing the commit record. Should the system
crash during the second slow write, the journal can be replayed all the
way to the latest commit record, guaranteeing the atomicity of whatever
gets written through the journal to the disk. The effect of this is to
guarantee that the filesystem does not become stuck midway through a
metadata update.

For performance reasons, ext4 by default only writes filesystem metadata
through the journal. This means that file data blocks are /not/
guaranteed to be in any consistent state after a crash. If this default
guarantee level (``data=ordered``) is not satisfactory, there is a mount
option to control journal behavior. If ``data=journal``, all data and
metadata are written to disk through the journal. This is slower but
safest. If ``data=writeback``, dirty data blocks are not flushed to the
disk before the metadata are written to disk through the journal.

The journal inode is typically inode 8. The first 68 bytes of the
journal inode are replicated in the ext4 superblock. The journal itself
is normal (but hidden) file within the filesystem. The file usually
consumes an entire block group, though mke2fs tries to put it in the
middle of the disk.

All fields in jbd2 are written to disk in big-endian order. This is the
opposite of ext4.

NOTE: Both ext4 and ocfs2 use jbd2.

The maximum size of a journal embedded in an ext4 filesystem is 2^32
blocks. jbd2 itself does not seem to care.

Layout
~~~~~~

Generally speaking, the journal has this format:

.. list-table::
   :widths: 16 48 16
   :header-rows: 1

   * - Superblock
     - descriptor\_block (data\_blocks or revocation\_block) [more data or
       revocations] commmit\_block
     - [more transactions...]
   * - 
     - One transaction
     -

Notice that a transaction begins with either a descriptor and some data,
or a block revocation list. A finished transaction always ends with a
commit. If there is no commit record (or the checksums don't match), the
transaction will be discarded during replay.

External Journal
~~~~~~~~~~~~~~~~

Optionally, an ext4 filesystem can be created with an external journal
device (as opposed to an internal journal, which uses a reserved inode).
In this case, on the filesystem device, ``s_journal_inum`` should be
zero and ``s_journal_uuid`` should be set. On the journal device there
will be an ext4 super block in the usual place, with a matching UUID.
The journal superblock will be in the next full block after the
superblock.

.. list-table::
   :widths: 12 12 12 32 12
   :header-rows: 1

   * - 1024 bytes of padding
     - ext4 Superblock
     - Journal Superblock
     - descriptor\_block (data\_blocks or revocation\_block) [more data or
       revocations] commmit\_block
     - [more transactions...]
   * - 
     -
     -
     - One transaction
     -

Block Header
~~~~~~~~~~~~

Every block in the journal starts with a common 12-byte header
``struct journal_header_s``:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Description
   * - 0x0
     - \_\_be32
     - h\_magic
     - jbd2 magic number, 0xC03B3998.
   * - 0x4
     - \_\_be32
     - h\_blocktype
     - Description of what this block contains. See the jbd2_blocktype_ table
       below.
   * - 0x8
     - \_\_be32
     - h\_sequence
     - The transaction ID that goes with this block.

.. _jbd2_blocktype:

The journal block type can be any one of:

.. list-table::
   :widths: 16 64
   :header-rows: 1

   * - Value
     - Description
   * - 1
     - Descriptor. This block precedes a series of data blocks that were
       written through the journal during a transaction.
   * - 2
     - Block commit record. This block signifies the completion of a
       transaction.
   * - 3
     - Journal superblock, v1.
   * - 4
     - Journal superblock, v2.
   * - 5
     - Block revocation records. This speeds up recovery by enabling the
       journal to skip writing blocks that were subsequently rewritten.

Super Block
~~~~~~~~~~~

The super block for the journal is much simpler as compared to ext4's.
The key data kept within are size of the journal, and where to find the
start of the log of transactions.

The journal superblock is recorded as ``struct journal_superblock_s``,
which is 1024 bytes long:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Description
   * -
     -
     -
     - Static information describing the journal.
   * - 0x0
     - journal\_header\_t (12 bytes)
     - s\_header
     - Common header identifying this as a superblock.
   * - 0xC
     - \_\_be32
     - s\_blocksize
     - Journal device block size.
   * - 0x10
     - \_\_be32
     - s\_maxlen
     - Total number of blocks in this journal.
   * - 0x14
     - \_\_be32
     - s\_first
     - First block of log information.
   * -
     -
     -
     - Dynamic information describing the current state of the log.
   * - 0x18
     - \_\_be32
     - s\_sequence
     - First commit ID expected in log.
   * - 0x1C
     - \_\_be32
     - s\_start
     - Block number of the start of log. Contrary to the comments, this field
       being zero does not imply that the journal is clean!
   * - 0x20
     - \_\_be32
     - s\_errno
     - Error value, as set by jbd2\_journal\_abort().
   * -
     -
     -
     - The remaining fields are only valid in a v2 superblock.
   * - 0x24
     - \_\_be32
     - s\_feature\_compat;
     - Compatible feature set. See the table jbd2_compat_ below.
   * - 0x28
     - \_\_be32
     - s\_feature\_incompat
     - Incompatible feature set. See the table jbd2_incompat_ below.
   * - 0x2C
     - \_\_be32
     - s\_feature\_ro\_compat
     - Read-only compatible feature set. There aren't any of these currently.
   * - 0x30
     - \_\_u8
     - s\_uuid[16]
     - 128-bit uuid for journal. This is compared against the copy in the ext4
       super block at mount time.
   * - 0x40
     - \_\_be32
     - s\_nr\_users
     - Number of file systems sharing this journal.
   * - 0x44
     - \_\_be32
     - s\_dynsuper
     - Location of dynamic super block copy. (Not used?)
   * - 0x48
     - \_\_be32
     - s\_max\_transaction
     - Limit of journal blocks per transaction. (Not used?)
   * - 0x4C
     - \_\_be32
     - s\_max\_trans\_data
     - Limit of data blocks per transaction. (Not used?)
   * - 0x50
     - \_\_u8
     - s\_checksum\_type
     - Checksum algorithm used for the journal.  See jbd2_checksum_type_ for
       more info.
   * - 0x51
     - \_\_u8[3]
     - s\_padding2
     -
   * - 0x54
     - \_\_u32
     - s\_padding[42]
     -
   * - 0xFC
     - \_\_be32
     - s\_checksum
     - Checksum of the entire superblock, with this field set to zero.
   * - 0x100
     - \_\_u8
     - s\_users[16\*48]
     - ids of all file systems sharing the log. e2fsprogs/Linux don't allow
       shared external journals, but I imagine Lustre (or ocfs2?), which use
       the jbd2 code, might.

.. _jbd2_compat:

The journal compat features are any combination of the following:

.. list-table::
   :widths: 16 64
   :header-rows: 1

   * - Value
     - Description
   * - 0x1
     - Journal maintains checksums on the data blocks.
       (JBD2\_FEATURE\_COMPAT\_CHECKSUM)

.. _jbd2_incompat:

The journal incompat features are any combination of the following:

.. list-table::
   :widths: 16 64
   :header-rows: 1

   * - Value
     - Description
   * - 0x1
     - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE)
   * - 0x2
     - Journal can deal with 64-bit block numbers.
       (JBD2\_FEATURE\_INCOMPAT\_64BIT)
   * - 0x4
     - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT)
   * - 0x8
     - This journal uses v2 of the checksum on-disk format. Each journal
       metadata block gets its own checksum, and the block tags in the
       descriptor table contain checksums for each of the data blocks in the
       journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2)
   * - 0x10
     - This journal uses v3 of the checksum on-disk format. This is the same as
       v2, but the journal block tag size is fixed regardless of the size of
       block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)

.. _jbd2_checksum_type:

Journal checksum type codes are one of the following.  crc32 or crc32c are the
most likely choices.

.. list-table::
   :widths: 16 64
   :header-rows: 1

   * - Value
     - Description
   * - 1
     - CRC32
   * - 2
     - MD5
   * - 3
     - SHA1
   * - 4
     - CRC32C

Descriptor Block
~~~~~~~~~~~~~~~~

The descriptor block contains an array of journal block tags that
describe the final locations of the data blocks that follow in the
journal. Descriptor blocks are open-coded instead of being completely
described by a data structure, but here is the block structure anyway.
Descriptor blocks consume at least 36 bytes, but use a full block:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Descriptor
   * - 0x0
     - journal\_header\_t
     - (open coded)
     - Common block header.
   * - 0xC
     - struct journal\_block\_tag\_s
     - open coded array[]
     - Enough tags either to fill up the block or to describe all the data
       blocks that follow this descriptor block.

Journal block tags have any of the following formats, depending on which
journal feature and block tag flags are set.

If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is
defined as ``struct journal_block_tag3_s``, which looks like the
following. The size is 16 or 32 bytes.

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Descriptor
   * - 0x0
     - \_\_be32
     - t\_blocknr
     - Lower 32-bits of the location of where the corresponding data block
       should end up on disk.
   * - 0x4
     - \_\_be32
     - t\_flags
     - Flags that go with the descriptor. See the table jbd2_tag_flags_ for
       more info.
   * - 0x8
     - \_\_be32
     - t\_blocknr\_high
     - Upper 32-bits of the location of where the corresponding data block
       should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is
       not enabled.
   * - 0xC
     - \_\_be32
     - t\_checksum
     - Checksum of the journal UUID, the sequence number, and the data block.
   * -
     -
     -
     - This field appears to be open coded. It always comes at the end of the
       tag, after t_checksum. This field is not present if the "same UUID" flag
       is set.
   * - 0x8 or 0xC
     - char
     - uuid[16]
     - A UUID to go with this tag. This field appears to be copied from the
       ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
       field.

.. _jbd2_tag_flags:

The journal tag flags are any combination of the following:

.. list-table::
   :widths: 16 64
   :header-rows: 1

   * - Value
     - Description
   * - 0x1
     - On-disk block is escaped. The first four bytes of the data block just
       happened to match the jbd2 magic number.
   * - 0x2
     - This block has the same UUID as previous, therefore the UUID field is
       omitted.
   * - 0x4
     - The data block was deleted by the transaction. (Not used?)
   * - 0x8
     - This is the last tag in this descriptor block.

If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag
is defined as ``struct journal_block_tag_s``, which looks like the
following. The size is 8, 12, 24, or 28 bytes:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Descriptor
   * - 0x0
     - \_\_be32
     - t\_blocknr
     - Lower 32-bits of the location of where the corresponding data block
       should end up on disk.
   * - 0x4
     - \_\_be16
     - t\_checksum
     - Checksum of the journal UUID, the sequence number, and the data block.
       Note that only the lower 16 bits are stored.
   * - 0x6
     - \_\_be16
     - t\_flags
     - Flags that go with the descriptor. See the table jbd2_tag_flags_ for
       more info.
   * -
     -
     -
     - This next field is only present if the super block indicates support for
       64-bit block numbers.
   * - 0x8
     - \_\_be32
     - t\_blocknr\_high
     - Upper 32-bits of the location of where the corresponding data block
       should end up on disk.
   * -
     -
     -
     - This field appears to be open coded. It always comes at the end of the
       tag, after t_flags or t_blocknr_high. This field is not present if the
       "same UUID" flag is set.
   * - 0x8 or 0xC
     - char
     - uuid[16]
     - A UUID to go with this tag. This field appears to be copied from the
       ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
       field.

If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
``struct jbd2_journal_block_tail``, which looks like this:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Descriptor
   * - 0x0
     - \_\_be32
     - t\_checksum
     - Checksum of the journal UUID + the descriptor block, with this field set
       to zero.

Data Block
~~~~~~~~~~

In general, the data blocks being written to disk through the journal
are written verbatim into the journal file after the descriptor block.
However, if the first four bytes of the block match the jbd2 magic
number then those four bytes are replaced with zeroes and the “escaped”
flag is set in the descriptor block tag.

Revocation Block
~~~~~~~~~~~~~~~~

A revocation block is used to prevent replay of a block in an earlier
transaction. This is used to mark blocks that were journalled at one
time but are no longer journalled. Typically this happens if a metadata
block is freed and re-allocated as a file data block; in this case, a
journal replay after the file block was written to disk will cause
corruption.

**NOTE**: This mechanism is NOT used to express “this journal block is
superseded by this other journal block”, as the author (djwong)
mistakenly thought. Any block being added to a transaction will cause
the removal of all existing revocation records for that block.

Revocation blocks are described in
``struct jbd2_journal_revoke_header_s``, are at least 16 bytes in
length, but use a full block:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Description
   * - 0x0
     - journal\_header\_t
     - r\_header
     - Common block header.
   * - 0xC
     - \_\_be32
     - r\_count
     - Number of bytes used in this block.
   * - 0x10
     - \_\_be32 or \_\_be64
     - blocks[0]
     - Blocks to revoke.

After r\_count is a linear array of block numbers that are effectively
revoked by this transaction. The size of each block number is 8 bytes if
the superblock advertises 64-bit block number support, or 4 bytes
otherwise.

If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
block is a ``struct jbd2_journal_revoke_tail``, which has this format:

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Description
   * - 0x0
     - \_\_be32
     - r\_checksum
     - Checksum of the journal UUID + revocation block

Commit Block
~~~~~~~~~~~~

The commit block is a sentry that indicates that a transaction has been
completely written to the journal. Once this commit block reaches the
journal, the data stored with this transaction can be written to their
final locations on disk.

The commit block is described by ``struct commit_header``, which is 32
bytes long (but uses a full block):

.. list-table::
   :widths: 8 8 24 40
   :header-rows: 1

   * - Offset
     - Type
     - Name
     - Descriptor
   * - 0x0
     - journal\_header\_s
     - (open coded)
     - Common block header.
   * - 0xC
     - unsigned char
     - h\_chksum\_type
     - The type of checksum to use to verify the integrity of the data blocks
       in the transaction. See jbd2_checksum_type_ for more info.
   * - 0xD
     - unsigned char
     - h\_chksum\_size
     - The number of bytes used by the checksum. Most likely 4.
   * - 0xE
     - unsigned char
     - h\_padding[2]
     -
   * - 0x10
     - \_\_be32
     - h\_chksum[JBD2\_CHECKSUM\_BYTES]
     - 32 bytes of space to store checksums. If
       JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3
       are set, the first ``__be32`` is the checksum of the journal UUID and
       the entire commit block, with this field zeroed. If
       JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the
       crc32 of all the blocks already written to the transaction.
   * - 0x30
     - \_\_be64
     - h\_commit\_sec
     - The time that the transaction was committed, in seconds since the epoch.
   * - 0x38
     - \_\_be32
     - h\_commit\_nsec
     - Nanoseconds component of the above timestamp.