1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADV7511/11W/13 HDMI Encoders
maintainers:
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
description: |
The ADV7511, ADV7511W and ADV7513 are HDMI audio and video
transmitters compatible with HDMI 1.4 and DVI 1.0. They support color
space conversion, S/PDIF, CEC and HDCP. The transmitter input is
parallel RGB or YUV data.
properties:
compatible:
enum:
- adi,adv7511
- adi,adv7511w
- adi,adv7513
reg:
description: |
I2C slave addresses.
The ADV7511/11W/13 internal registers are split into four pages
exposed through different I2C addresses, creating four register
maps. Each map has it own I2C address and acts as a standard slave
device on the I2C bus. The main address is mandatory, others are
optional and revert to defaults if not specified.
minItems: 1
maxItems: 4
reg-names:
description:
Names of maps with programmable addresses. It can contain any map
needing a non-default address.
minItems: 1
maxItems: 4
items:
- const: main
- const: edid
- const: cec
- const: packet
clocks:
description: Reference to the CEC clock.
maxItems: 1
clock-names:
const: cec
interrupts:
maxItems: 1
pd-gpios:
description: GPIO connected to the power down signal.
maxItems: 1
avdd-supply:
description: A 1.8V supply that powers up the AVDD pin.
dvdd-supply:
description: A 1.8V supply that powers up the DVDD pin.
pvdd-supply:
description: A 1.8V supply that powers up the PVDD pin.
dvdd-3v-supply:
description: A 3.3V supply that powers up the DVDD_3V pin.
bgvdd-supply:
description: A 1.8V supply that powers up the BGVDD pin.
adi,input-depth:
description: Number of bits per color component at the input.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 8, 10, 12 ]
adi,input-colorspace:
description: Input color space.
enum: [ rgb, yuv422, yuv444 ]
adi,input-clock:
description: |
Input clock type.
"1x": one clock cycle per pixel
"2x": two clock cycles per pixel
"dd": one clock cycle per pixel, data driven on both edges
enum: [ 1x, 2x, dd ]
adi,clock-delay:
description:
Video data clock delay relative to the pixel clock, in ps
(-1200ps .. 1600 ps).
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
adi,embedded-sync:
description:
If defined, the input uses synchronization signals embedded in the
data stream (similar to BT.656).
type: boolean
adi,input-style:
description:
Input components arrangement variant as listed in the input
format tables in the datasheet.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 1, 2, 3 ]
adi,input-justification:
description: Input bit justification.
enum: [ left, evenly, right ]
ports:
description:
The ADV7511(W)/13 has two video ports and one audio port. This node
models their connections as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
Documentation/devicetree/bindings/graph.txt
type: object
properties:
port@0:
description: Video port for the RGB or YUV input.
type: object
port@1:
description: Video port for the HDMI output.
type: object
port@2:
description: Audio port for the HDMI output.
type: object
# adi,input-colorspace and adi,input-clock are required except in
# "rgb 1x" and "yuv444 1x" modes, in which case they must not be
# specified.
if:
not:
properties:
adi,input-colorspace:
contains:
enum: [ rgb, yuv444 ]
adi,input-clock:
contains:
const: 1x
then:
required:
- adi,input-style
- adi,input-justification
else:
properties:
adi,input-style: false
adi,input-justification: false
required:
- compatible
- reg
- ports
- adi,input-depth
- adi,input-colorspace
- adi,input-clock
- avdd-supply
- dvdd-supply
- pvdd-supply
- dvdd-3v-supply
- bgvdd-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6500000>;
adv7511w: hdmi@39 {
compatible = "adi,adv7511w";
/*
* The EDID page will be accessible on address 0x66 on the I2C
* bus. All other maps continue to use their default addresses.
*/
reg = <0x39>, <0x66>;
reg-names = "main", "edid";
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
clocks = <&cec_clock>;
clock-names = "cec";
avdd-supply = <&v1v8>;
dvdd-supply = <&v1v8>;
pvdd-supply = <&v1v8>;
dvdd-3v-supply = <&v3v3>;
bgvdd-supply = <&v1v8>;
adi,input-depth = <8>;
adi,input-colorspace = "yuv422";
adi,input-clock = "1x";
adi,input-style = <3>;
adi,input-justification = "right";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511w_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
port@2 {
reg = <2>;
codec_endpoint: endpoint {
remote-endpoint = <&i2s0_cpu_endpoint>;
};
};
};
};
};
...
|
