| Age | Commit message (Collapse) | Author |
|---|
|
The patch removes the remaining bpf_tcp_helpers.h usages in the
non tcp-cc networking tests. It either replaces it with bpf_tracing_net.h
or just removed it because the test is not actually using any
kernel sockets. For the later, the missing macro (mainly SOL_TCP) is
defined locally.
An exception is the test_sock_fields which is testing
the "struct bpf_sock" type instead of the kernel sock type.
Whenever "vmlinux.h" is used instead, it hits a verifier
error on doing arithmetic on the sock_common pointer:
; return !a6[0] && !a6[1] && !a6[2] && a6[3] == bpf_htonl(1); @ test_sock_fields.c:54
21: (61) r2 = *(u32 *)(r1 +28) ; R1_w=sock_common() R2_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
22: (56) if w2 != 0x0 goto pc-6 ; R2_w=0
23: (b7) r3 = 28 ; R3_w=28
24: (bf) r2 = r1 ; R1_w=sock_common() R2_w=sock_common()
25: (0f) r2 += r3
R2 pointer arithmetic on sock_common prohibited
Hence, instead of including bpf_tracing_net.h, the test_sock_fields test
defines a tcp_sock with one lsndtime field in it.
Another highlight is, in sockopt_qos_to_cc.c, the tcp_cc_eq()
is replaced by bpf_strncmp(). tcp_cc_eq() was a workaround
in bpf_tcp_helpers.h before bpf_strncmp had been added.
The SOL_IPV6 addition to bpf_tracing_net.h is needed by the
test_tcpbpf_kern test.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
llvm patch [1] enabled cross-function optimization for func arguments
(ArgumentPromotion) at -O2 level. And this caused s390 sock_fields
test failure ([2]). The failure is gone right now as patch [1] was
reverted in [3]. But it is possible that patch [3] will be reverted
again and then the test failure in [2] will show up again. So it is
desirable to fix the failure regardless.
The following is an analysis why sock_field test fails with
llvm patch [1].
The main problem is in
static __noinline bool sk_dst_port__load_word(struct bpf_sock *sk)
{
__u32 *word = (__u32 *)&sk->dst_port;
return word[0] == bpf_htons(0xcafe);
}
static __noinline bool sk_dst_port__load_half(struct bpf_sock *sk)
{
__u16 *half = (__u16 *)&sk->dst_port;
return half[0] == bpf_htons(0xcafe);
}
...
int read_sk_dst_port(struct __sk_buff *skb)
{
...
sk = skb->sk;
...
if (!sk_dst_port__load_word(sk))
RET_LOG();
if (!sk_dst_port__load_half(sk))
RET_LOG();
...
}
Through some cross-function optimization by ArgumentPromotion
optimization, the compiler does:
static __noinline bool sk_dst_port__load_word(__u32 word_val)
{
return word_val == bpf_htons(0xcafe);
}
static __noinline bool sk_dst_port__load_half(__u16 half_val)
{
return half_val == bpf_htons(0xcafe);
}
...
int read_sk_dst_port(struct __sk_buff *skb)
{
...
sk = skb->sk;
...
__u32 *word = (__u32 *)&sk->dst_port;
__u32 word_val = word[0];
...
if (!sk_dst_port__load_word(word_val))
RET_LOG();
__u16 half_val = word_val >> 16;
if (!sk_dst_port__load_half(half_val))
RET_LOG();
...
}
In current uapi bpf.h, we have
struct bpf_sock {
...
__be16 dst_port; /* network byte order */
__u16 :16; /* zero padding */
...
};
But the old kernel (e.g., 5.6) we have
struct bpf_sock {
...
__u32 dst_port; /* network byte order */
...
};
So for backward compatability reason, 4-byte load of
dst_port is converted to 2-byte load internally.
Specifically, 'word_val = word[0]' is replaced by 2-byte load
by the verifier and this caused the trouble for later
sk_dst_port__load_half() where half_val becomes 0.
Typical usr program won't have such a code pattern tiggering
the above bug, so let us fix the test failure with source
code change. Adding an empty asm volatile statement seems
enough to prevent undesired transformation.
[1] https://reviews.llvm.org/D148269
[2] https://lore.kernel.org/bpf/e7f2c5e8-a50c-198d-8f95-388165f1e4fd@meta.com/
[3] https://reviews.llvm.org/rG141be5c062ecf22bd287afffd310e8ac4711444a
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230516214945.1013578-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Once we enable -Wall for BPF sources, compiler will complain about lots
of unused variables, variables that are set but never read, etc.
Fix all these issues first before enabling -Wall in Makefile.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The check for 4-byte load from dst_port offset into bpf_sock is failing on
big-endian architecture - s390. The bpf access converter rewrites the
4-byte load to a 2-byte load from sock_common at skc_dport offset, as shown
below.
* s390 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 51966 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* s390 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
35: (69) r1 = *(u16 *)(r1 +12)
36: (bc) w1 = w1
37: (b4) w0 = 1
38: (16) if w1 == 0xcafe goto pc+1
39: (b4) w0 = 0
40: (95) exit
* x86_64 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 65226 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* x86_64 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
33: (69) r1 = *(u16 *)(r1 +12)
34: (b4) w0 = 1
35: (16) if w1 == 0xfeca goto pc+1
36: (b4) w0 = 0
37: (95) exit
This leads to surprises if we treat the destination register contents as a
32-bit value, ignoring the fact that in reality it contains a 16-bit value.
On little-endian the register contents reflect the bpf_sock struct
definition, where the lower 16-bits contain the port number:
struct bpf_sock {
...
__be16 dst_port; /* offset 48 */
__u16 :16;
...
};
However, on big-endian the register contents suggest that field the layout
of bpf_sock struct is as so:
struct bpf_sock {
...
__u16 :16; /* offset 48 */
__be16 dst_port;
...
};
Account for this quirky access conversion in the test case exercising the
4-byte load by treating the result as 16-bit wide.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com
|
|
Replace magic numbers in BPF code with constants from bpf.h, so that they
don't require an explanation in the comments.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-4-jakub@cloudflare.com
|
|
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
|
|
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
|
|
Add coverage to the verifier tests and tests for reading bpf_sock fields to
ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed
only at intended offsets and produce expected values.
While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit
wide loads need be allowed and produce a zero-padded 16-bit value for
backward compatibility.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp".
Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get().
It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id()
with the "ktp". To do that, a parent cgroup and a child cgroup are
created. The bpf prog is attached to the child cgroup.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000446.3858975-1-kafai@fb.com
|
|
skel is used.
Global variables are used to store the result from bpf prog.
addr_map, sock_result_map, and tcp_sock_result_map are gone.
Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp,
listen_sk, srv_sk, and cli_sk are added.
Because of that, bpf_addr_array_idx and bpf_result_array_idx are also
no longer needed.
CHECK() macro from test_progs.h is reused and bail as soon as
a CHECK failure.
shutdown() is used to ensure the previous data-ack is received.
The bytes_acked, bytes_received, and the pkt_out_cnt checks are
using "<" to accommodate the final ack may not have been received/sent.
It is enough since it is not the focus of this test.
The sk local storage is all initialized to 0xeB9F now, so the
check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to
keep things simple.
The next patch will reuse helpers from network_helpers.h to simplify
things further.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000434.3858204-1-kafai@fb.com
|
|
This is a mechanical change to
1. move test_sock_fields.c to prog_tests/sock_fields.c
2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c
Minimal change is made to the code itself. Next patch will make
changes to use new ways of writing test, e.g. use skel and global
variables.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000427.3857814-1-kafai@fb.com
|
