| Age | Commit message (Collapse) | Author |
|---|
|
To simplify the !CONFIG_THERMAL case in the hwmon core,
add a !CONFIG_THERMAL stub for thermal_zone_device_update().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add and use a special guard for cooling devices.
This allows quite a few error code paths to be simplified among
other things and brings in code size reduction for a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5837621.DvuYhMxLoT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
The user thresholds mechanism is a way to have the userspace to tell
the thermal framework to send a notification when a temperature limit
is crossed. There is no id, no hysteresis, just the temperature and
the direction of the limit crossing. That means we can be notified
when a threshold is crossed the way up only, or the way down only or
both ways. That allows to create hysteresis values if it is needed.
A threshold can be added, deleted or flushed. The latter means all
thresholds belonging to a thermal zone will be deleted.
When a threshold is added:
- if the same threshold (temperature and direction) exists, an error
is returned
- if a threshold is specified with the same temperature but a
different direction, the specified direction is added
- if there is no threshold with the same temperature then it is
created
When a threshold is deleted:
- if the same threshold (temperature and direction) exists, it is
deleted
- if a threshold is specified with the same temperature but a
different direction, the specified direction is removed
- if there is no threshold with the same temperature, then an error
is returned
When the threshold are flushed:
- All thresholds related to a thermal zone are deleted
When a threshold is crossed:
- the userspace does not need to know which threshold(s) have been
crossed, it will be notified with the current temperature and the
previous temperature
- if multiple thresholds have been crossed between two updates only
one notification will be send to the userspace, it is pointless to
send a notification per thresholds crossed as the userspace can
handle that easily when it has the temperature delta information
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org
[ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are no more callers of thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), so drop them along with all of
the corresponding headers, code and documentation.
Moreover, because the .bind() and .unbind() thermal zone callbacks would
only be used when the above functions, respectively, were called, drop
them as well along with all of the code related to them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/4251116.1IzOArtZ34@rjwysocki.net
|
|
thermal_unbind_cdev_from_trip()
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3512161.QJadu78ljV@rjwysocki.net
|
|
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/9334403.CDJkKcVGEf@rjwysocki.net
|
|
|
|
After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.
For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.
However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.
To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net
|
|
There are no more callers of thermal_zone_get_trip() in the tree, so
drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2220301.Mh6RI2rZIc@rjwysocki.net
|
|
The only existing caller of thermal_zone_get_num_trips(), which is
rcar_gen3_thermal_probe(), uses this function to put the number of
trip points into a kernel log message, but this information is also
available from the thermal sysfs interface.
For this reason, remove the thermal_zone_get_num_trips() call from
rcar_gen3_thermal_probe() and drop the former altogether.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2636988.Lt9SDvczpP@rjwysocki.net
|
|
Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
|
|
Out of several drivers implementing the .set_trip_temp() thermal zone
operation, three don't actually use the trip ID argument passed to it,
two call __thermal_zone_get_trip() to get a struct thermal_trip
corresponding to the given trip ID, and the other use the trip ID as an
index into their own data structures with the assumption that it will
always match the ordering of entries in the trips table passed to the
core during thermal zone registration, which is fragile and not really
guaranteed.
Even though the trip IDs used by the core are in fact their indices in the
trips table passed to it by the thermal zone creator, that is purely a
matter of convenience and should not be relied on for correctness.
For this reason, modify trip_point_temp_store() to pass a (const) trip
pointer to .set_trip_temp() and adjust the drivers implementing it
accordingly.
This helps to simplify the drivers invoking __thermal_zone_get_trip()
from their .set_trip_temp() callback functions because they will not
need to do it now and the other drivers can store their internal
trip indices in the priv field in struct thermal_trip and their
.set_trip_temp() callback functions can get those indices from there.
The intel_quark_dts thermal driver can instead use the trip type to
determine the requisite trip index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8392906.T7Z3S40VBb@rjwysocki.net
[ rjw: Add missing colon and 2 empty code lines ]
[ rjw: Add missing change in imx_thermal.c and adjust the changelog ]
[ rjw: Drop an unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some drivers will need to store integers in the priv field of struct
thermal_trip, so add conversion macros for doing this in a consistent
way and switch over the int340x_thermal driver that already does it and
uses custom conversion functions to using the new macros.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3297884.aeNJFYEL58@rjwysocki.net
|
|
Introduce a new helper function thermal_trip_is_bound_to_cdev() for
checking whether or not a given trip point has been bound to a given
cooling device.
The primary user of it will be the Tegra thermal driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13545762.uLZWGnKmhe@rjwysocki.net
|
|
It is better to use unsigned int as the data type for the passive_delay
and polling_delay arguments of thermal_zone_device_register_with_trips()
because they are implicitly cast to unsigned int anyway in
thermal_set_delay_jiffies() and if they happen to be negative at that
point, the resulting behavior may not be as desired.
Update the thermal_zone_device_register_with_trips() definition
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5803791.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The 'type' string passed to thermal_of_cooling_device_register() is a
'const char *', so do the same in the devm interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703083141.96013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that struct thermal_governor is only used by the thermal core
and so move its definition to thermal_core.h.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Move the definitions of struct thermal_trip_desc and struct
thermal_zone_device to an internal header file in the thermal core,
as they don't need to be accessible to any code other than the thermal
core and so they don't need to be present in a global header.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The threshold field in struct thermal_trip is only used internally by
the thermal core and it is better to prevent drivers from misusing it.
It also takes some space unnecessarily in the trip tables passed by
drivers to the core during thermal zone registration.
For this reason, introduce struct thermal_trip_desc as a wrapper around
struct thermal_trip, move the threshold field directly into it and make
the thermal core store struct thermal_trip_desc objects in the internal
thermal zone trip tables. Adjust all of the code using trip tables in
the thermal core accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
None of the users of the thermal core provides a .set_trip_hyst()
thermal zone operation, so drop that callback from struct
thermal_zone_device_ops and update trip_point_hyst_store()
accordingly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In order to allow thermal zone creators to specify the writability of
trip point temperature and hysteresis on a per-trip basis, add a flags
field to struct thermal_trip and define flags to represent the desired
trip properties.
Also make thermal_zone_device_register_with_trips() set the
THERMAL_TRIP_FLAG_RW_TEMP flag for all trips covered by the writable
trips mask passed to it and modify the thermal sysfs code to look at
the trip flags instead of using the writable trips mask directly or
checking the presence of the .set_trip_hyst() zone callback.
Additionally, make trip_point_temp_store() and trip_point_hyst_store()
fail with an error code if the trip passed to one of them has
THERMAL_TRIP_FLAG_RW_TEMP or THERMAL_TRIP_FLAG_RW_HYST,
respectively, clear in its flags.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code requires thermal zone creators to pass pointers to
writable ops structures to thermal_zone_device_register_with_trips()
which needs to modify the target struct thermal_zone_device_ops object
if the "critical" operation in it is NULL.
Moreover, the callers of thermal_zone_device_register_with_trips() are
required to hold on to the struct thermal_zone_device_ops object passed
to it until the given thermal zone is unregistered.
Both of these requirements are quite inconvenient, so modify struct
thermal_zone_device to contain struct thermal_zone_device_ops as field and
make thermal_zone_device_register_with_trips() copy the contents of the
struct thermal_zone_device_ops passed to it via a pointer (which can be
const now) to that field.
Also adjust the code using thermal zone ops accordingly and modify
thermal_of_zone_register() to use a local ops variable during
thermal zone registration so ops do not need to be freed in
thermal_of_zone_unregister() any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The current code expects thermal zone creators to pass a pointer to a
writable trips table to thermal_zone_device_register_with_trips() and
that trips table is then used by the thermal core going forward.
Consequently, the callers of thermal_zone_device_register_with_trips()
are required to hold on to the trips table passed to it until the given
thermal zone is unregistered, at which point the trips table can be
freed, but at the same time they are not expected to access that table
directly. This is both error prone and confusing.
To address it, turn the trips table pointer in struct thermal_zone_device
into a flex array (counted by its num_trips field), allocate it during
thermal zone device allocation and copy the contents of the trips table
supplied by the zone creator (which can be const now) into it, which
will allow the callers of thermal_zone_device_register_with_trips() to
drop their trip tables right after the zone registration.
This requires the imx thermal driver to be adjusted to store the new
temperature in its internal trips table in imx_set_trip_temp(), because
it will be separate from the core's trips table now and it has to be
explicitly kept in sync with the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
All users are already assigning a const char * to the `governor_name`
member of struct thermal_zone_params and to the `name` member of
struct thermal_governor.
Even if users are technically wrong, it just makes more sense to change
this member to be a const char pointer instead of doing the other way
around.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These add support for debugfs-based diagnostics to the thermal core,
simplify the thermal netlink API, fix system-wide PM support in the
Intel HFI driver and clean up some code.
Specifics:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter)
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen)
- Simplify the thermal netlink API and clean up related code (Rafael
J. Wysocki)
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri)"
* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: intel: hfi: Add syscore callbacks for system-wide PM
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
|
|
Some *thermal_cooling_device_register() calls pass a string literal as
the 'type' parameter, so kstrdup_const() can be used instead of
kstrdup() to avoid a memory allocation in such cases.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The thermal framework does not have any debug information except a
sysfs stat which is a bit controversial. This one allocates big chunks
of memory for every cooling devices with a high number of states and
could represent on some systems in production several megabytes of
memory for just a portion of it. As the sysfs is limited to a page
size, the output is not exploitable with large data array and gets
truncated.
The patch provides the same information than sysfs except the
transitions are dynamically allocated, thus they won't show more
events than the ones which actually occurred. There is no longer a
size limitation and it opens the field for more debugging information
where the debugfs is designed for, not sysfs.
The thermal debugfs directory structure tries to stay consistent with
the sysfs one but in a very simplified way:
thermal/
-- cooling_devices
|-- 0
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 1
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 2
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 3
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
`-- 4
|-- clear
|-- time_in_state_ms
|-- total_trans
`-- trans_table
The content of the files in the cooling devices directory is the same
as the sysfs one except for the trans_table which has the following
format:
Transition Hits
1->0 246
0->1 246
2->1 632
1->2 632
3->2 98
2->3 98
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: White space fixups, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.
One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.
Specifics:
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)
- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)
- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)
- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fix thermal DT bindings issue on Loongson (Binbin Zhou)
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)
- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)
- Fix compilation warning in the tmon utility (Florian Eckert)
- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)
- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)
- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"
* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...
|
|
Support governors update when the thermal instance's weight has changed.
This allows to adjust internal state for the governor.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Add two empty code lines aroung the locking ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new callback to the struct thermal_governor. It can be used for
updating governors when there is a change in the thermal zone internals,
e.g. thermal cooling device is bind to the thermal zone.
That makes possible to move some heavy operations like memory allocations
related to the number of cooling instances out of the throttle() callback.
Both callback code paths (throttle() and update_tz()) are protected with
the same thermal zone lock, which guaranties the consistency.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are 3 synchronization issues with thermal zone suspend-resume
during system-wide transitions:
1. The resume code runs in a PM notifier which is invoked after user
space has been thawed, so it can run concurrently with user space
which can trigger a thermal zone device removal. If that happens,
the thermal zone resume code may use a stale pointer to the next
list element and crash, because it does not hold thermal_list_lock
while walking thermal_tz_list.
2. The thermal zone resume code calls thermal_zone_device_init()
outside the zone lock, so user space or an update triggered by
the platform firmware may see an inconsistent state of a
thermal zone leading to unexpected behavior.
3. Clearing the in_suspend global variable in thermal_pm_notify()
allows __thermal_zone_device_update() to continue for all thermal
zones and it may as well run before the thermal_tz_list walk (or
at any point during the list walk for that matter) and attempt to
operate on a thermal zone that has not been resumed yet. It may
also race destructively with thermal_zone_device_init().
To address these issues, add thermal_list_lock locking to
thermal_pm_notify(), especially arount the thermal_tz_list,
make it call thermal_zone_device_init() back-to-back with
__thermal_zone_device_update() under the zone lock and replace
in_suspend with per-zone bool "suspend" indicators set and unset
under the given zone's lock.
Link: https://lore.kernel.org/linux-pm/20231218162348.69101-1-bo.ye@mediatek.com/
Reported-by: Bo Ye <bo.ye@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The _store callbacks of the trip point temperature and hysteresis sysfs
attributes invoke thermal_notify_tz_trip_change() to send a notification
regarding the trip point change, but when trip points are updated by the
platform firmware, trip point change notifications are not sent.
To make the behavior after a trip point change more consistent,
modify all of the 3 places where trip point temperature is updated
to use a new function called thermal_zone_set_trip_temp() for this
purpose and make that function call thermal_notify_tz_trip_change().
Note that trip point hysteresis can only be updated via sysfs and
trip_point_hyst_store() calls thermal_notify_tz_trip_change() already,
so this code path need not be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
the zone
Make thermal_zone_device_unregister() wait until all of the references
to the given thermal zone object have been dropped and free it before
returning.
This guarantees that when thermal_zone_device_unregister() returns,
there is no leftover activity regarding the thermal zone in question
which is required by some of its callers (for instance, modular driver
code that wants to know when it is safe to let the module go away).
Subsequently, this will allow some confusing device_is_registered()
checks to be dropped from the thermal sysfs and core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-and-tested-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Both trip_point_temp_store() and trip_point_hyst_store() use
thermal_zone_set_trip() to update a given trip point, but none of them
actually needs to change more than one field in struct thermal_trip
representing it. However, each of them effectively calls
__thermal_zone_get_trip() twice in a row for the same trip index value,
once directly and once via thermal_zone_set_trip(), which is not
particularly efficient, and the way in which thermal_zone_set_trip()
carries out the update is not particularly straightforward.
Moreover, input processing need not be done under the thermal zone lock
in any of these functions.
Rework trip_point_temp_store() and trip_point_hyst_store() to address
the above, move the part of thermal_zone_set_trip() that is still
useful to a new function called thermal_zone_trip_updated() and drop
the rest of it.
While at it, make trip_point_hyst_store() reject negative hysteresis
values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The ACPI thermal library contains functions that can be used to
retrieve trip point temperature values through the platform firmware
for various types of trip points. Each of these functions basically
evaluates a specific ACPI object, checks if the value produced by it
is reasonable and returns it (or THERMAL_TEMP_INVALID if anything
fails).
It made sense to hold it in drivers/thermal/ so long as it was only used
by the code in that directory, but since it is also going to be used by
the ACPI thermal driver located in drivers/acpi/, move it to the latter
in order to keep the code related to evaluating ACPI objects defined in
the specification proper together.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The trip crossing detection in handle_thermal_trip() does not work
correctly in the cases when a trip point is crossed on the way up and
then the zone temperature stays above its low temperature (that is, its
temperature decreased by its hysteresis). The trip temperature may
be passed by the zone temperature subsequently in that case, even
multiple times, but that does not count as the trip crossing as long as
the zone temperature does not fall below the trip's low temperature or,
in other words, until the trip is crossed on the way down.
|-----------low--------high------------|
|<--------->|
| hyst |
| |
| -|--> crossed on the way up
|
<---|-- crossed on the way down
However, handle_thermal_trip() will invoke thermal_notify_tz_trip_up()
every time the trip temperature is passed by the zone temperature on
the way up regardless of whether or not the trip has been crossed on
the way down yet. Moreover, it will not call thermal_notify_tz_trip_down()
if the last zone temperature was between the trip's temperature and its
low temperature, so some "trip crossed on the way down" events may not
be reported.
To address this issue, introduce trip thresholds equal to either the
temperature of the given trip, or its low temperature, such that if
the trip's threshold is passed by the zone temperature on the way up,
its value will be set to the trip's low temperature and
thermal_notify_tz_trip_up() will be called, and if the trip's threshold
is passed by the zone temperature on the way down, its value will be set
to the trip's temperature (high) and thermal_notify_tz_trip_down() will
be called. Accordingly, if the threshold is passed on the way up, it
cannot be passed on the way up again until its passed on the way down
and if it is passed on the way down, it cannot be passed on the way down
again until it is passed on the way up which guarantees correct
triggering of trip crossing notifications.
If the last temperature of the zone is invalid, the trip's threshold
will be set depending of the zone's current temperature: If that
temperature is above the trip's temperature, its threshold will be
set to its low temperature or otherwise its threshold will be set to
its (high) temperature. Because the zone temperature is initially
set to invalid and tz->last_temperature is only updated by
update_temperature(), this is sufficient to set the correct initial
threshold values for all trips.
Link: https://lore.kernel.org/all/20220718145038.1114379-4-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify the governor .throttle() callback definition so that it takes a
trip pointer instead of a trip index as its second argument, adjust the
governors accordingly and update the core code invoking .throttle().
This causes the governors to become independent of the representation
of the list of trips in the thermal zone structure.
This change is not expected to alter the general functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Because thermal_zone_device_exec() has no users any more and there are
no plans to use it anywhere, revert commit 9a99a996d1ec ("thermal: core:
Introduce thermal_zone_device_exec()") that introduced it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add a wrapper around for_each_thermal_trip(), called
thermal_zone_for_each_trip(), that will invoke the former under the
thermal zone lock and pass its return value to the caller.
Two drivers will be modified subsequently to use this new function.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add new helper functions, thermal_bind_cdev_to_trip() and
thermal_unbind_cdev_from_trip(), to allow a trip pointer to be used for
binding a cooling device to a trip point and unbinding it, respectively,
and redefine the existing helpers, thermal_zone_bind_cooling_device()
and thermal_zone_unbind_cooling_device(), as wrappers around the new
ones, respectively.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
After recent changes, thermal_zone_get_trip() cannot fail, as invoked
from thermal_zone_device_register_with_trips(), so the only role of
the trips_disabled bitmask is struct thermal_zone_device is to make
handle_thermal_trip() skip trip points whose temperature was initially
zero. However, since the unit of temperature in the thermal core is
millicelsius, zero may very well be a valid temperature value at least
in some usage scenarios and the trip temperature may as well change
later. Thus there is no reason to permanently disable trip points
with initial temperature equal to zero.
Accordingly, drop the trips_disabled bitmask along with the code
related to it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add 'const' to the definition of the 'trip' argument of the
.get_trend() thermal zone callback to indicate that the trip point
passed to it should not be modified by it and adjust the
callback functions implementing it, thermal_get_trend() in the
ACPI thermal driver and __ti_thermal_get_trend(), accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
|
|
There are no more users of thermal_zone_device_register(), so drop it
from the core.
Note that thermal_zone_device_register_with_trips() may be renamed to
thermal_zone_device_register() in the future, but only after a grace
period allowing all of the possible work in progress that may be using
the latter to adjust.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Multiple callers of thermal_zone_device_register() don't pass any trips
to it and they might use a shortened argument list for that, so add
a special function with fewer arguments for this purpose.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For consistency, add a missing thermal_zone_device_register_with_trips()
stub for the CONFIG_THERMAL unset case, specify argument names in all of
the thermal zone registration and unregistration function headers and
make all of them use white space consistently.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing a struct thermal_trip pointer instead of a trip index to the
.get_trend() thermal zone callback allows one of its 2 implementations,
the thermal_get_trend() function in the ACPI thermal driver, to be
simplified quite a bit, and the other implementation of it in the
ti-soc-thermal driver does not even use the relevant callback argument.
For this reason, change the .get_trend() thermal zone callback
definition and adjust the related code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After recent changes in the ACPI thermal driver and in the Intel DTS
IOSF thermal driver, all thermal zone drivers are expected to use trip
tables for initialization and none of them should implement
.get_trip_type(), .get_trip_temp() or .get_trip_hyst() callbacks, so
drop these callbacks entirely from the core.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge ACPI thermal driver changes for 6.6-rc1:
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
|
|
Rework the currently unused __for_each_thermal_trip() to pass original
pointers to struct thermal_trip objects to the callback, so it can be
used for updating trip data (e.g. temperatures), rename it to
for_each_thermal_trip() and make it available to modular drivers.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
