| Age | Commit message (Collapse) | Author |
|---|
|
Some replicators have hard coded filtering of "trace" data, based on the
source device. This is different from the trace filtering based on
TraceID, available in the standard programmable replicators. e.g.,
Qualcomm replicators have filtering based on custom trace protocol
format and is not programmable.
The source device could be connected to the replicator via intermediate
components (e.g., a funnel). Thus we need platform information from
the firmware tables to decide the source device corresponding to a
given output port from the replicator. Given this affects "trace
path building" and traversing the path back from the sink to source,
add the concept of "filtering by source" to the generic coresight
connection.
The specified source will be marked like below in the Devicetree.
test-replicator {
... ... ... ...
out-ports {
... ... ... ...
port@0 {
reg = <0>;
xyz: endpoint {
remote-endpoint = <&zyx>;
filter-source = <&source_1>; <-- To specify the source to
}; be filtered out here.
};
port@1 {
reg = <1>;
abc: endpoint {
remote-endpoint = <&cba>;
filter-source = <&source_2>; <-- To specify the source to
}; be filtered out here.
};
};
};
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-4-quic_taozha@quicinc.com
|
|
Since there are a lot of places in the code to check whether the
device is source, add a helper to check it.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-3-quic_taozha@quicinc.com
|
|
Dynamic trace id was introduced in coresight subsystem, so trace id is
allocated dynamically. However, some hardware ATB source has static trace
id and it cannot be changed via software programming. For such source,
it can call coresight_get_static_trace_id to get the fixed trace id from
device node and pass id to coresight_trace_id_get_static_system_id to
reserve the id.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241121062829.11571-3-quic_jinlmao@quicinc.com
|
|
These belong to the device being enabled or disabled and are only ever
used inside the device's spinlock. Remove the atomics to not imply that
there are any other concurrent accesses.
If atomics were necessary I don't think they would have been enough
anyway. There would be nothing to prevent an enable or disable running
concurrently if not for the spinlock.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241128121414.2425119-1-james.clark@linaro.org
|
|
Reduce contention on the lock by replacing the global lock with one for
each map.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-18-james.clark@linaro.org
|
|
Pending the release of IDs was a way of managing concurrent sysfs and
Perf sessions in a single global ID map. Perf may have finished while
sysfs hadn't, and Perf shouldn't release the IDs in use by sysfs and
vice versa.
Now that Perf uses its own exclusive ID maps, pending release doesn't
result in any different behavior than just releasing all IDs when the
last Perf session finishes. As part of the per-sink trace ID change, we
would have still had to make the pending mechanism work on a per-sink
basis, due to the overlapping ID allocations, so instead of making that
more complicated, just remove it.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-16-james.clark@linaro.org
|
|
This will allow sessions with more than CORESIGHT_TRACE_IDS_MAX ETMs
as long as there are fewer than that many ETMs connected to each sink.
Each sink owns its own trace ID map, and any Perf session connecting to
that sink will allocate from it, even if the sink is currently in use by
other users. This is similar to the existing behavior where the dynamic
trace IDs are constant as long as there is any concurrent Perf session
active. It's not completely optimal because slightly more IDs will be
used than necessary, but the optimal solution involves tracking the PIDs
of each session and allocating ID maps based on the session owner. This
is difficult to do with the combination of per-thread and per-cpu modes
and some scheduling issues. The complexity of this isn't likely to worth
it because even with multiple users they'd just see a difference in the
ordering of ID allocations rather than hitting any limits (unless the
hardware does have too many ETMs connected to one sink).
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-15-james.clark@linaro.org
|
|
The global CPU ID mappings won't work for per-sink ID maps so move it to
the ID map struct. coresight_trace_id_release_all_pending() is hard
coded to operate on the default map, but once Perf sessions use their
own maps the pending release mechanism will be deleted. So it doesn't
need to be extended to accept a trace ID map argument at this point.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-14-james.clark@linaro.org
|
|
The trace ID maps will need to be created and stored by the core and
Perf code so move the definition up to the common header.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-12-james.clark@linaro.org
|
|
./include/linux/coresight.h: linux/amba/bus.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8869
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240424022420.58516-1-jiapeng.chong@linux.alibaba.com
|
|
This adds two different helpers i.e coresight_init_driver()/remove_driver()
enabling coresight devices to register or remove AMBA and platform drivers.
This changes replicator and funnel devices to use above new helpers.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-5-anshuman.khandual@arm.com
|
|
Now that mode is in struct coresight_device, sets can be wrapped. This
also allows us to add a sanity check that there have been no concurrent
modifications of mode. Currently all usages of local_set() were inside
the device's spin locks so this new warning shouldn't be triggered.
coresight_take_mode() could maybe have been used in place of adding
the warning, but there may be use cases which set the mode to the same
mode which are valid but would fail in coresight_take_mode() because
it requires the device to only be in the disabled state.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device accesses can be wrapped.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-12-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device, this pattern can be wrapped
in a helper.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-11-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
These are a bit annoying to keep up to date when the function signatures
change. But if CONFIG_CORESIGHT isn't enabled, then they're not used
anyway so just delete them.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-9-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Refcnt is only ever accessed from either inside the coresight_mutex, or
the device's spinlock, making the atomic type and atomic_dec_return()
calls confusing and unnecessary. The only point of synchronisation
outside of these two types of locks is already done with a compare and
swap on 'mode', which a comment has been added for.
There was one instance of refcnt being used outside of a lock in TPIU,
but that can easily be fixed by making it the same as all the other
devices and adding a spinlock. Potentially in the future all the
refcounting and locking can be moved up into the core code, and all the
mostly duplicate code from the individual devices can be removed.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-8-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
At the moment the core file contains both sysfs functionality and
core functionality, while the Perf mode is in a separate file in
coresight-etm-perf.c
Many of the functions have ambiguous names like
coresight_enable_source() which actually only work in relation to the
sysfs mode. To avoid further confusion, move everything that isn't core
functionality into the sysfs file and append _sysfs to the ambiguous
functions.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-7-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
'enable', which probably should have been 'enabled', is only ever read
in the core code in relation to controlling sources, and specifically
only sources in sysfs mode. Confusingly it's not labelled as such and
relying on it can be a source of bugs like the one fixed by
commit 078dbba3f0c9 ("coresight: Fix crash when Perf and sysfs modes are
used concurrently").
Most importantly, it can only be used when the coresight_mutex is held
which is only done when enabling and disabling paths in sysfs mode, and
not Perf mode. So to prevent its usage spreading and leaking out to
other devices, remove it.
It's use is equivalent to checking if the mode is currently sysfs, as
due to the coresight_mutex lock, mode == CS_MODE_SYSFS can only become
true or untrue when that lock is held, and when mode == CS_MODE_SYSFS
the device is both enabled and in sysfs mode.
The one place it was used outside of the core code is in TPDA, but that
pattern is more appropriately represented using refcounts inside the
device's own spinlock.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-6-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Most devices use mode, so move the mode definition out of the individual
devices and up to the Coresight device. This will allow the core code to
also know the mode which will be useful in a later commit.
This also fixes the inconsistency of the documentation of the mode field
on the individual device types. For example ETB10 had "this ETB is being
used".
Two devices didn't require an atomic mode type, so these usages have
been converted to atomic_get() and atomic_set() only to make it compile,
but the documentation of the field in struct coresight_device explains
this type of usage.
In the future, manipulation of the mode could be completely moved out of
the individual devices and into the core code because it's almost all
duplicate code, and this change is a step towards that.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Activated has the specific meaning of a sink that's selected for use by
the user via sysfs. But comments in some code that's shared by Perf use
the same word, so in those cases change them to just say "selected"
instead. With selected implying either via Perf or "activated" via
sysfs.
coresight_get_enabled_sink() doesn't actually get an enabled sink, it
only gets an activated one, so change that too.
And change the activated variable name to include "sysfs" so it can't
be confused as a general status.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-3-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the coresight_bustype variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/2024010531-tinfoil-avert-4a57@gregkh
|
|
Introduce the new subtype of "CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM"
for TPDM components in driver.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1695882586-10306-4-git-send-email-quic_taozha@quicinc.com
|
|
Add support for handling MMIO based devices via platform driver. We need to
make sure that :
1) The APB clock, if present is enabled at probe and via runtime_pm ops
2) Use the ETM4x architecture or CoreSight architecture registers to
identify a device as CoreSight ETM4x, instead of relying a white list of
"Peripheral IDs"
The driver doesn't get to handle the devices yet, until we wire the ACPI
changes to move the devices to be handled via platform driver than the
etm4_amba driver.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-5-anshuman.khandual@arm.com
|
|
Coresight device pid can be retrieved from its iomem base address, which is
stored in 'struct etm4x_drvdata'. This drops pid argument from etm4_probe()
and 'struct etm4_init_arg'. Instead etm4_check_arch_features() derives the
coresight device pid with a new helper coresight_get_pid(), right before it
is consumed in etm4_hisi_match_pid().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-4-anshuman.khandual@arm.com
|
|
Some Coresight devices that kernel don't have permission to access or
configure. For these devices, a dummy driver is needed to register them as
Coresight devices. The module may also be used to define components that
may not have any programming interfaces, so that paths can be created
in the driver. It provides Coresight API for operations on dummy devices,
such as enabling and disabling them. It also provides the Coresight dummy
sink/source paths for debugging.
Signed-off-by: Hao Zhang <quic_hazha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230602084149.40031-2-quic_hazha@quicinc.com
|
|
The CTI module has some hard coded refcounting code that has a leak.
For example running perf and then trying to unload it fails:
perf record -e cs_etm// -a -- ls
rmmod coresight_cti
rmmod: ERROR: Module coresight_cti is in use
The coresight core already handles references of devices in use, so by
making CTI a normal helper device, we get working refcounting for free.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-14-james.clark@arm.com
|
|
Currently CATU is the only helper device, and its enable and disable
calls are hard coded. To allow more helper devices to be added in a
generic way, remove these hard coded calls and just enable and disable
all helper devices.
This has to apply to helpers adjacent to the path, because they will
never be in the path. CATU was already discovered in this way, so
there is no change there.
One change that is needed is for CATU to call back into ETR to allocate
the buffer. Because the enable call was previously hard coded, it was
done at a point where the buffer was already allocated, but this is no
longer the case.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-13-james.clark@arm.com
|
|
This removes the need to do an additional lookup for the total number
of ports used and also removes the need to allocate an array of
refcounts which is just another representation of a connection array.
This was only used for link type devices, for regular devices a single
refcount on the coresight device is used.
There is a both an input and output refcount in case two link type
devices are connected together so that they don't overwrite each other's
counts.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-11-james.clark@arm.com
|
|
This will allow CATU to get its associated ETR in a generic way where
currently the enable path has some hard coded searches which avoid
the need to store input connections.
This also means that the full search for connected devices on removal
can be replaced with a loop through only the input and output devices.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-10-james.clark@arm.com
|
|
This will allow the same connection object to be referenced via the
input connection list in a later commit rather than duplicating them.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-8-james.clark@arm.com
|
|
Add a function for adding connections dynamically. This also removes
the 1:1 mapping between port number and the index into the connections
array. The only place this mapping was used was in the warning for
duplicate output ports, which has been replaced by a search. Other
uses of the port number already use the port member variable.
Being able to dynamically add connections will allow other devices like
CTI to re-use the connection mechanism despite not having explicit
connections described in the DT.
The connections array is now no longer sparse, so child_fwnode doesn't
need to be checked as all connections have a target node. Because the
array is no longer sparse, the high in and out port numbers are required
for the refcount arrays. But these will also be removed in a later
commit when the refcount is made a property of the connection.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-7-james.clark@arm.com
|
|
When input connections are added they will use the same connection
object as the output so parent and child could be misinterpreted. Making
the direction unambiguous in the names should improve readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-6-james.clark@arm.com
|
|
Rename to avoid confusion between port number and the index in the
connection array. The port number is already stored in the connection,
and in a later commit the connection array will be appended to, so
the length of it will no longer reflect the number of ports.
No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-5-james.clark@arm.com
|
|
conns is actually for output connections. Change the name to make it
clearer and so that we can add input connections later.
No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-4-james.clark@arm.com
|
|
mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-3-james.clark@arm.com
|
|
Add driver to support Coresight device TPDM (Trace, Profiling and
Diagnostics Monitor). TPDM is a monitor to collect data from
different datasets. This change is to add probe/enable/disable
functions for tpdm source.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230120095301.30792-1-quic_jinlmao@quicinc.com
|
|
CoreSight sources provide a callback (.trace_id) in the standard source
ops which returns the ID to the core code. This was used to check that
sources all had a unique Trace ID.
Uniqueness is now gauranteed by the Trace ID allocation system, and the
check code has been removed from the core.
This patch removes the unneeded and unused .trace_id source ops
from the ops structure and implementations in etm3x, etm4x and stm.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-8-mike.leach@linaro.org
|
|
New csdev_access functions were added as part of the previous
refactor. In order to make them more consistent with the
existing ones, change any signed offset types to be unsigned.
Now that they are unsigned, stop using hi_off = -1 to signify
a single 32bit access. Instead just call the existing 32bit
accessors. This is also applied to other parts of the codebase,
and the coresight_{read,write}_reg_pair() functions can be
deleted.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The coresight_device struct is available in the sysfs accessor, and this
contains a csdev_access struct which can be used to access registers.
Use this instead of passing in the type of each drvdata so that a common
function can be shared between all the cs drivers.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
CORESIGHT_DEV_TYPE_NONE/CORESIGHT_DEV_SUBTYPE_XXXX_NONE values are not used
any where. Actual enumeration can start from 0. Just drop these unused enum
values.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1645005118-10561-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Configurations are first activated, then when any coresight device is
enabled, the active configurations are checked and any matching
one is enabled.
This patch provides the activation / enable API.
Link: https://lore.kernel.org/r/20210723165444.1048-6-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
API for individual devices to register with the syscfg management
system is added.
Devices register with matching information, and any features or
configurations that match will be loaded into the device.
The feature and configuration loading is extended so that on load these
are loaded into any currently registered devices. This allows
configuration loading after devices have been registered.
Link: https://lore.kernel.org/r/20210723165444.1048-3-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for dedicated sinks that are bound to individual CPUs. (e.g,
TRBE). To allow quicker access to the sink for a given CPU bound source,
keep a percpu array of the sink devices. Also, add support for building
a path to the CPU local sink from the ETM.
This adds a new percpu sink type CORESIGHT_DEV_SUBTYPE_SINK_PERCPU_SYSMEM.
This new sink type is exclusively available and can only work with percpu
source type device CORESIGHT_DEV_SUBTYPE_SOURCE_PROC.
This defines a percpu structure that accommodates a single coresight_device
which can be used to store an initialized instance from a sink driver. As
these sinks are exclusively linked and dependent on corresponding percpu
sources devices, they should also be the default sink device during a perf
session.
Outwards device connections are scanned while establishing paths between a
source and a sink device. But such connections are not present for certain
percpu source and sink devices which are exclusively linked and dependent.
Build the path directly and skip connection scanning for such devices.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Moved the set/get percpu sink APIs from TRBE patch to here
Fixed build break on arm32]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-17-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Convert the generic CLAIM tag management APIs to use the
device access layer abstraction.
Link: https://lore.kernel.org/r/20210110224850.1880240-7-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the generic routines to use the new access abstraction layer
gradually, starting with coresigth_timeout.
Link: https://lore.kernel.org/r/20210110224850.1880240-6-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We are about to introduce support for sysreg access to ETMv4.4+
component. Since there are generic routines that access the
registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout)
and in order to preserve the logic of these operations at a
single place we introduce an abstraction layer for the accesses
to a given device.
Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If associated ect device is not enabled at first place, disable
routine should not be called. Add ect_enabled flag to check whether
ect device is enabled. Fix the issue in below case. Ect device is
not available when associated coresight device enabled and the
association is established after coresight device is enabled.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED
that is true for both built-ins and modules, instead. Required
when building coresight components as modules.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comment for an elemnt in the coresight_device structure appears to have
been corrupted and makes no sense. Fix this before making further changes.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
