| Age | Commit message (Collapse) | Author |
|---|
|
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the error handling
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since there is no user of reader locks, rename the writer locks into a
more generic name, by removing the "_writer" part from the name.
And also rename btrfs_subpage::writer into btrfs_subpage::locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit d7172f52e993 ("btrfs: use per-buffer locking for
extent_buffer reading"), metadata read no longer relies on the subpage
reader locking.
This means we do not need to maintain a different metadata/data split
for locking, so we can convert the existing reader lock users by:
- add_ra_bio_pages()
Convert to btrfs_folio_set_writer_lock()
- end_folio_read()
Convert to btrfs_folio_end_writer_lock()
- begin_folio_read()
Convert to btrfs_folio_set_writer_lock()
- folio_range_has_eb()
Remove the subpage->readers checks, since it is always 0.
- Remove btrfs_subpage_start_reader() and btrfs_subpage_end_reader()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This function is not really suitable to lock a folio, as it lacks the
proper mapping checks, thus the locked folio may not even belong to
btrfs.
And due to the above reason, the last user inside lock_delalloc_folios()
is already removed, and we can remove this function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently for subpage (sector size < page size) cases, we reuse subpage
locked bitmap to find out all delalloc ranges we have locked, and run
all those found ranges.
However such reuse is not perfect, e.g.:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above range, writepage_delalloc() for page 0 will handle the range
[32K, 96k), note delalloc range can be beyond the page boundary.
But writepage_delalloc() for page 64K will only handle range [120K,
128K), as the previous run on page 0 has already handled range [64K,
96K).
Meanwhile for the writeback we should expect range [64K, 96K) to also be
locked, this leads to the mismatch from locked bitmap and delalloc
range.
This is not causing problems yet, but it's still an inconsistent
behavior.
So instead of relying on the subpage locked bitmap, move the delalloc
range search using local @delalloc_bitmap, so that we can remove the
existing btrfs_folio_find_writer_locked().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[SUBPAGE COMPRESSION LIMITS]
Currently inside writepage_delalloc(), if a delalloc range is going to
be submitted asynchronously (inline or compression, the page
dirty/writeback/unlock are all handled in at different time, not at the
submission time), then we return 1 and extent_writepage() will skip the
submission.
This is fine if every sector matches page size, but if a sector is
smaller than page size (aka, subpage case), then it can be very
problematic, for example for the following 64K page:
0 16K 32K 48K 64K
|/| |///////| |/|
| |
4K 52K
Where |/| is the dirty range we need to submit.
In the above case, we need the following different handling for the 3
ranges:
- [0, 4K) needs to be submitted for regular write
A single sector cannot be compressed.
- [16K, 32K) needs to be submitted for compressed write
- [48K, 52K) needs to be submitted for regular write.
Above, if we try to submit [16K, 32K) for compressed write, we will
return 1 and immediately, and without submitting the remaining
[48K, 52K) range.
Furthermore, since extent_writepage() will exit without unlocking any
sectors, the submitted range [0, 4K) will not have sector unlocked.
That's the reason why for now subpage is only allowed for full page
range.
[ENHANCEMENT]
- Introduce a submission bitmap at btrfs_bio_ctrl::submit_bitmap
This records which sectors will be submitted by extent_writepage_io().
This allows us to track which sectors needs to be submitted thus later
to be properly unlocked.
For asynchronously submitted range (inline/compression), the
corresponding bits will be cleared from that bitmap.
- Only return 1 if no sector needs to be submitted in
writepage_delalloc()
- Only submit sectors marked by submission bitmap inside
extent_writepage_io()
So we won't touch the asynchronously submitted part.
- Introduce btrfs_folio_end_writer_lock_bitmap() helper
This will only unlock the involved sectors specified by @bitmap
parameter, to avoid touching the range asynchronously submitted.
Please note that, since subpage compression is still limited to page
aligned range, this change is only a preparation for future sector
perfect compression support for subpage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_folio_unlock_writer() is already calling
btrfs_folio_end_writer_lock() to do the heavy lifting work, the only
missing 0 writer check.
Thus there is no need to keep two different functions, move the 0 writer
check into btrfs_folio_end_writer_lock(), and remove
btrfs_folio_unlock_writer().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_folio_end_all_writers() is only utilized in
extent_writepage() as a way to unlock all subpage range (for both
successful submission and error handling).
Meanwhile we have a similar function, btrfs_folio_end_writer_lock().
The difference is, btrfs_folio_end_writer_lock() expects a range that is
a subset of the already locked range.
This limit on btrfs_folio_end_writer_lock() is a little overkilled,
preventing it from being utilized for error paths.
So here we enhance btrfs_folio_end_writer_lock() to accept a superset of
the locked range, and only end the locked subset.
This means we can replace btrfs_folio_end_all_writers() with
btrfs_folio_end_writer_lock() instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The member btrfs_fs_info::subpage_info stores the cached bitmap start
position inside the merged bitmap.
However in reality there is only one thing depending on the sectorsize,
bitmap_nr_bits, which records the number of sectors that fit inside a
page.
The sequence of sub-bitmaps have fixed order, thus it's just a quick
multiplication to calculate the start position of each sub-bitmaps.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unlike the bitmap usage inside raid56, for __extent_writepage_io() we
handle the subpage submission not sector-by-sector, but for each dirty
range we found.
This is not a big deal normally, as the subpage complex code is already
mostly optimized out by the compiler for x86_64.
However for the sake of consistency and for the future of subpage
sector-perfect compression support, this patch does:
- Extract the sector submission code into submit_one_sector()
- Add the needed code to extract the dirty bitmap for subpage case
There is a small pitfall for non-subpage case, as we cleared page
dirty before starting writeback, so we have to manually set
the default dirty_bitmap to 1 for such case.
- Use bitmap_and() to calculate the target sectors we need to submit
This is done for both subpage and non-subpage cases, and will later
be expanded to skip inline/compression ranges.
For x86_64, the dirty bitmap will be fixed to 1, with the length of 1,
so we're still doing the same workload per sector.
For larger page sizes, the overhead will be a little larger, as previous
we only need to do one extent_map lookup per-dirty-range, but now it
will be one extent_map lookup per-sector.
But that is the same frequency as x86_64, so we're just aligning the
behavior to x86_64.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs only supports sectorsize 4K, 8K, 16K, 32K, 64K for now, thus for
systems with 4K page size, there is no way the fs is subpage (sectorsize
< PAGE_SIZE).
So here we define btrfs_is_subpage() different according to the
PAGE_SIZE:
- PAGE_SIZE > 4K
We may hit real subpage cases, define btrfs_is_subpage() as a regular
function and do the usual checks.
- PAGE_SIZE == 4K (no smaller PAGE_SIZE support AFAIK)
There is no way the fs is subpage, so just define btrfs_is_subpage()
as an inline function which always return false.
This saves about 7K bytes for x86_64 debug builds:
text data bss dec hex filename
Before: 1484452 168693 25776 1678921 199e49 fs/btrfs/btrfs.ko
After: 1476605 168445 25776 1670826 197eaa fs/btrfs/btrfs.ko
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Three new helpers are introduced for the incoming subpage delalloc locking
change.
- btrfs_folio_set_writer_lock()
This is to mark specified range with subpage specific writer lock.
After calling this, the subpage range can be proper unlocked by
btrfs_folio_end_writer_lock()
- btrfs_subpage_find_writer_locked()
This is to find the writer locked subpage range in a page.
With the help of btrfs_folio_set_writer_lock(), it can allow us to
record and find previously locked subpage range without extra memory
allocation.
- btrfs_folio_end_all_writers()
This is for the locked_page of __extent_writepage(), as there may be
multiple subpage delalloc ranges locked.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function __extent_writepage_io() is designed to find all dirty ranges of
a page, and add the dirty ranges to the bio_ctrl for submission.
It requires all the dirtied ranges to be covered by an ordered extent.
It gets called in two locations, but one call site is not subpage aware:
- __extent_writepage()
It gets called when writepage_delalloc() returned 0, which means
writepage_delalloc() has handled delalloc for all subpage sectors
inside the page.
So this call site is OK.
- extent_write_locked_range()
This call site is utilized by zoned support, and in this case, we may
only run delalloc range for a subset of the page, like this: (64K page
size)
0 16K 32K 48K 64K
|/////| |///////| |
In the above case, if extent_write_locked_range() is only triggered for
range [0, 16K), __extent_writepage_io() would still try to submit
the dirty range of [32K, 48K), then it would not find any ordered
extent for it and triggers various ASSERT()s.
Fix this problem by:
- Introducing @start and @len parameters to specify the range
For the first call site, we just pass the whole page, and the behavior
is not touched, since run_delalloc_range() for the page should have
created all ordered extents for the page.
For the second call site, we avoid touching anything beyond the
range, thus avoiding the dirty range which is not yet covered by any
delalloc range.
- Making btrfs_folio_assert_not_dirty() subpage aware
The only caller is inside __extent_writepage_io(), and since that
caller now accepts a subpage range, we should also check the subpage
range other than the whole page.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_subpage utilizes its atomic member @reader to manage the
reader counter. However it is only utilized to prevent the page to be
released/unlocked when we still have reads underway.
In that use case, we don't really allow multiple readers on the same
subpage sector. So here we can introduce a new locked bitmap to
represent exactly which subpage range is locked for read.
In theory we can remove btrfs_subpage::reader as it's just the set bits
of the new locked bitmap. But unfortunately bitmap doesn't provide such
handy API yet, so we still keep the reader counter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_subpage_end_and_test_writer()
Both functions were introduced in commit 1e1de38792e0 ("btrfs: make
process_one_page() to handle subpage locking"), but they have never
been utilized out of subpage code. So just unexport them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in more headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although subpage itself is conflicting with higher folio, since subpage
(sectorsize < PAGE_SIZE and nodesize < PAGE_SIZE) means we will never
need higher order folio, there is a hidden pitfall:
- btrfs_page_*() helpers
Those helpers are an abstraction to handle both subpage and non-subpage
cases, which means we're going to pass pages pointers to those helpers.
And since those helpers are shared between data and metadata paths, it's
unavoidable to let them to handle folios, including higher order
folios).
Meanwhile for true subpage case, we should only have a single page
backed folios anyway, thus add a new ASSERT() for btrfs_subpage_assert()
to ensure that.
Also since those helpers are shared between both data and metadata, add
some extra ASSERT()s for data path to make sure we only get single page
backed folio for now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although we have migrated extent_buffer::pages[] to folios[], we're
still mostly using the folio_page() help to grab the page.
This patch would do the following cleanups for metadata:
- Introduce num_extent_folios() helper
This is to replace most num_extent_pages() callers.
- Use num_extent_folios() to iterate future large folios
This allows us to use things like
bio_add_folio()/bio_add_folio_nofail(), and only set the needed flags
for the folio (aka the leading/tailing page), which reduces the loop
iteration to 1 for large folios.
- Change metadata related functions to use folio pointers
Including their function name, involving:
* attach_extent_buffer_page()
* detach_extent_buffer_page()
* page_range_has_eb()
* btrfs_release_extent_buffer_pages()
* btree_clear_page_dirty()
* btrfs_page_inc_eb_refs()
* btrfs_page_dec_eb_refs()
- Change btrfs_is_subpage() to accept an address_space pointer
This is to allow both page->mapping and folio->mapping to be utilized.
As data is still using the old per-page code, and may keep so for a
while.
- Special corner case place holder for future order mismatches between
extent buffer and inode filemap
For now it's just a block of comments and a dead ASSERT(), no real
handling yet.
The subpage code would still go page, just because subpage and large
folio are conflicting conditions, thus we don't need to bother subpage
with higher order folios at all. Just folio_page(folio, 0) would be
enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor styling tweaks ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
PageError is not used by the VFS/MM and deprecated because it uses up a
page bit and has no coherent rules. Instead read errors are usually
propagated by not setting or clearing the uptodate bit, and write errors
are propagated through the address_space. Btrfs now only sets the flag
and never clears it for data pages, so just remove all places setting it,
and the subpage error bit.
Note that the error propagation for superblock writes that work on the
block device mapping still uses PageError for now, but that will be
addressed in a separate series.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a bug report that assert_eb_page_uptodate() gets triggered for
free space tree metadata.
Without proper dump for the subpage bitmaps it's much harder to debug.
Thus this patch would dump all the subpage bitmaps (split them into
their own bitmaps) for a easier debugging.
The output would look like this:
(Dumped after a tree block got read from disk)
page:000000006e34bf49 refcount:4 mapcount:0 mapping:0000000067661ac4 index:0x1d1 pfn:0x110e9
memcg:ffff0000d7d62000
aops:btree_aops [btrfs] ino:1
flags: 0x8000000000002002(referenced|private|zone=2)
page_type: 0xffffffff()
raw: 8000000000002002 0000000000000000 dead000000000122 ffff00000188bed0
raw: 00000000000001d1 ffff0000c7992700 00000004ffffffff ffff0000d7d62000
page dumped because: btrfs subpage dump
BTRFS warning (device dm-1): start=30490624 len=16384 page=30474240 bitmaps: uptodate=4-7 error= dirty= writeback= ordered= checked=
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The reason why we only support 64K page size for subpage is, for 64K
page size we can ensure no matter what the nodesize is, we can fit it
into one page.
When other page size come, especially like 16K, the limitation is a bit
limiting.
To remove such limitation, we allow nodesize >= PAGE_SIZE case to go the
non-subpage routine. By this, we can allow 4K sectorsize on 16K page
size.
Although this introduces another smaller limitation, the metadata can
not cross page boundary, which is already met by most recent mkfs.
Another small improvement is, we can avoid the overhead for metadata if
nodesize >= PAGE_SIZE.
For 4K sector size and 64K page size/node size, or 4K sector size and
16K page size/node size, we don't need to allocate extra memory for the
metadata pages.
Please note that, this patch will not yet enable other page size support
yet.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pages passed to __extent_writepage() are always locked, but they may be
locked by different functions.
There are two types of locked page for __extent_writepage():
- Page locked by plain lock_page()
It should not have any subpage::writers count.
Can be unlocked by unlock_page().
This is the most common locked page for __extent_writepage() called
inside extent_write_cache_pages() or extent_write_full_page().
Rarer cases include the @locked_page from extent_write_locked_range().
- Page locked by lock_delalloc_pages()
There is only one caller, all pages except @locked_page for
extent_write_locked_range().
In this case, we have to call subpage helper to handle the case.
So here we introduce a helper, btrfs_page_unlock_writer(), to allow
__extent_writepage() to unlock different locked pages.
And since for all other callers of __extent_writepage() their pages are
ensured to be locked by lock_page(), also add an extra check for
epd::extent_locked to unlock such pages directly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although in btrfs we have very limited usage of PageChecked flag, it's
still some page flag not yet subpage compatible.
Fix it by introducing btrfs_subpage::checked_offset to do the convert.
For most call sites, especially for free-space cache, COW fixup and
btrfs_invalidatepage(), they all work in full page mode anyway.
For other call sites, they work as subpage compatible mode.
Some call sites need extra modification:
- btrfs_drop_pages()
Needs extra parameter to get the real range we need to clear checked
flag.
Also since btrfs_drop_pages() will accept pages beyond the dirtied
range, update btrfs_subpage_clamp_range() to handle such case
by setting @len to 0 if the page is beyond target range.
- btrfs_invalidatepage()
We need to call subpage helper before calling __btrfs_releasepage(),
or it will trigger ASSERT() as page->private will be cleared.
- btrfs_verify_data_csum()
In theory we don't need the io_bio->csum check anymore, but it's
won't hurt. Just change the comment.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use u16 bitmap to make 4k sectorsize work for 64K page
size.
But this u16 bitmap is not large enough to contain larger page size like
128K, nor is space efficient for 16K page size.
To handle both cases, here we pack all subpage bitmaps into a larger
bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for
subpage usage.
Each sub-bitmap will has its start bit number recorded in
btrfs_subpage_info::*_start, and its bitmap length will be recorded in
btrfs_subpage_info::bitmap_nr_bits.
All subpage bitmap operations will be converted from using direct u16
operations to bitmap operations, with above *_start calculated.
For 64K page size with 4K sectorsize, this should not cause much
difference.
While for 16K page size, we will only need 1 unsigned long (u32) to
store all the bitmaps, which saves quite some space.
Furthermore, this allows us to support larger page size like 128K and
258K.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine
for 4K sectorsize with 64K page size.
But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.
Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.
By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running fsstress with subpage RW support, there are random
BUG_ON()s triggered with the following trace:
kernel BUG at fs/btrfs/file-item.c:667!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 1 PID: 3486 Comm: kworker/u13:2 5.11.0-rc4-custom+ #43
Hardware name: Radxa ROCK Pi 4B (DT)
Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
lr : btrfs_csum_one_bio+0x400/0x4e0 [btrfs]
Call trace:
btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
btrfs_submit_bio_start+0x20/0x30 [btrfs]
run_one_async_start+0x28/0x44 [btrfs]
btrfs_work_helper+0x128/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
[CAUSE]
Above BUG_ON() means there is some bio range which doesn't have ordered
extent, which indeed is worth a BUG_ON().
Unlike regular sectorsize == PAGE_SIZE case, in subpage we have extra
subpage dirty bitmap to record which range is dirty and should be
written back.
This means, if we submit bio for a subpage range, we do not only need to
clear page dirty, but also need to clear subpage dirty bits.
In __extent_writepage_io(), we will call btrfs_page_clear_dirty() for
any range we submit a bio.
But there is loophole, if we hit a range which is beyond i_size, we just
call btrfs_writepage_endio_finish_ordered() to finish the ordered io,
then break out, without clearing the subpage dirty.
This means, if we hit above branch, the subpage dirty bits are still
there, if other range of the page get dirtied and we need to writeback
that page again, we will submit bio for the old range, leaving a wild
bio range which doesn't have ordered extent.
[FIX]
Fix it by always calling btrfs_page_clear_dirty() in
__extent_writepage_io().
Also to avoid such problem from happening again, add a new assert,
btrfs_page_assert_not_dirty(), to make sure both page dirty and subpage
dirty bits are cleared before exiting __extent_writepage_io().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.
No other reproducer so far.
The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().
[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:
T1 | T2
------------------------------------+-----------------------------
end_bio_extent_readpage() |
|- btrfs_validate_metadata_buffer() |
| |- free_extent_buffer() |
| Still have 2 refs |
|- end_page_read() |
|- if (unlikely(PagePrivate()) |
| The page still has Private |
| | free_extent_buffer()
| | | Only one ref 1, will be
| | | released
| | |- detach_extent_buffer_page()
| | |- btrfs_detach_subpage()
|- btrfs_set_page_uptodate() |
The page no longer has Private|
>>> ASSERT() triggered <<< |
This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.
But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.
Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.
[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.
Now btrfs_subpage::readers will be a member shared by both metadata and
data.
For metadata path, we don't do the page unlock as metadata only relies
on extent locking.
At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.
So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.
By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual. But it should not be a big deal.
The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.
Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch introduces the following functions to handle btrfs subpage
ordered (Private2) status:
- btrfs_subpage_set_ordered()
- btrfs_subpage_clear_ordered()
- btrfs_subpage_test_ordered()
These helpers can only be called when the range is ensured to be
inside the page.
- btrfs_page_set_ordered()
- btrfs_page_clear_ordered()
- btrfs_page_test_ordered()
These helpers can handle both regular sector size and subpage without
problem.
These functions are here to coordinate btrfs_invalidatepage() with
btrfs_writepage_endio_finish_ordered(), to make sure only one of those
functions can finish the ordered extent.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce a new data inodes specific subpage member, writers, to record
how many sectors are under page lock for delalloc writing.
This member acts pretty much the same as readers, except it's only for
delalloc writes.
This is important for delalloc code to trace which page can really be
freed, as we have cases like run_delalloc_nocow() where we may exit
processing nocow range inside a page, but need to exit to do cow half
way.
In that case, we need a way to determine if we can really unlock a full
page.
With the new btrfs_subpage::writers, there is a new requirement:
- Page locked by process_one_page() must be unlocked by
process_one_page()
There are still tons of call sites manually lock and unlock a page,
without updating btrfs_subpage::writers.
So if we lock a page through process_one_page() then it must be
unlocked by process_one_page() to keep btrfs_subpage::writers
consistent.
This will be handled in next patch.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the coming subpage RW supports, there are a lot of page status update
calls which need to be converted to subpage compatible version, which
needs @start and @len.
Some call sites already have such @start/@len and are already in
page range, like various endio functions.
But there are also call sites which need to clamp the range for subpage
case, like btrfs_dirty_pagse() and __process_contig_pages().
Here we introduce new helpers, btrfs_page_clamp_*(), to do and only do the
clamp for subpage version.
Although in theory all existing btrfs_page_*() calls can be converted to
use btrfs_page_clamp_*() directly, but that would make us to do
unnecessary clamp operations.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduces the following functions to handle subpage writeback status:
- btrfs_subpage_set_writeback()
- btrfs_subpage_clear_writeback()
- btrfs_subpage_test_writeback()
These helpers can only be called when the range is ensured to be
inside the page.
- btrfs_page_set_writeback()
- btrfs_page_clear_writeback()
- btrfs_page_test_writeback()
These helpers can handle both regular sector size and subpage without
problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce the following functions to handle subpage dirty status:
- btrfs_subpage_set_dirty()
- btrfs_subpage_clear_dirty()
- btrfs_subpage_test_dirty()
These helpers can only be called when the range is ensured to be
inside the page.
- btrfs_page_set_dirty()
- btrfs_page_clear_dirty()
- btrfs_page_test_dirty()
These helpers can handle both regular sector size and subpage without
problem.
Thus they would be used to replace PageDirty() related calls in
later patches.
There is one special point to note here, just like set_page_dirty() and
clear_page_dirty_for_io(), btrfs_*page_set_dirty() and
btrfs_*page_clear_dirty() must be called with page locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs data page read path, the page status update are handled in two
different locations:
btrfs_do_read_page()
{
while (cur <= end) {
/* No need to read from disk */
if (HOLE/PREALLOC/INLINE){
memset();
set_extent_uptodate();
continue;
}
/* Read from disk */
ret = submit_extent_page(end_bio_extent_readpage);
}
end_bio_extent_readpage()
{
endio_readpage_uptodate_page_status();
}
This is fine for sectorsize == PAGE_SIZE case, as for above loop we
should only hit one branch and then exit.
But for subpage, there is more work to be done in page status update:
- Page Unlock condition
Unlike regular page size == sectorsize case, we can no longer just
unlock a page.
Only the last reader of the page can unlock the page.
This means, we can unlock the page either in the while() loop, or in
the endio function.
- Page uptodate condition
Since we have multiple sectors to read for a page, we can only mark
the full page uptodate if all sectors are uptodate.
To handle both subpage and regular cases, introduce a pair of functions
to help handling page status update:
- begin_page_read()
For regular case, it does nothing.
For subpage case, it updates the reader counters so that later
end_page_read() can know who is the last one to unlock the page.
- end_page_read()
This is just endio_readpage_uptodate_page_status() renamed.
The original name is a little too long and too specific for endio.
The new thing added is the condition for page unlock.
Now for subpage data, we unlock the page if we're the last reader.
This does not only provide the basis for subpage data read, but also
hide the special handling of page read from the main read loop.
Also, since we're changing how the page lock is handled, there are two
existing error paths where we need to manually unlock the page before
calling begin_page_read().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce the following functions to handle subpage error status:
- btrfs_subpage_set_error()
- btrfs_subpage_clear_error()
- btrfs_subpage_test_error()
These helpers can only be called when the page has subpage attached
and the range is ensured to be inside the page.
- btrfs_page_set_error()
- btrfs_page_clear_error()
- btrfs_page_test_error()
These helpers can handle both regular sector size and subpage without
problem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce the following functions to handle subpage uptodate status:
- btrfs_subpage_set_uptodate()
- btrfs_subpage_clear_uptodate()
- btrfs_subpage_test_uptodate()
These helpers can only be called when the page has subpage attached
and the range is ensured to be inside the page.
- btrfs_page_set_uptodate()
- btrfs_page_clear_uptodate()
- btrfs_page_test_uptodate()
These helpers can handle both regular sector size and subpage.
Although caller should still ensure that the range is inside the page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_release_extent_buffer_pages(), we need to add extra handling
for subpage.
Introduce a helper, detach_extent_buffer_page(), to do different
handling for regular and subpage cases.
For subpage case, handle detaching page private.
For unmapped (dummy or cloned) ebs, we can detach the page private
immediately as the page can only be attached to one unmapped eb.
For mapped ebs, we have to ensure there are no eb in the page range
before we delete it, as page->private is shared between all ebs in the
same page.
But there is a subpage specific race, where we can race with extent
buffer allocation, and clear the page private while new eb is still
being utilized, like this:
Extent buffer A is the new extent buffer which will be allocated,
while extent buffer B is the last existing extent buffer of the page.
T1 (eb A) | T2 (eb B)
-------------------------------+------------------------------
alloc_extent_buffer() | btrfs_release_extent_buffer_pages()
|- p = find_or_create_page() | |
|- attach_extent_buffer_page() | |
| | |- detach_extent_buffer_page()
| | |- if (!page_range_has_eb())
| | | No new eb in the page range yet
| | | As new eb A hasn't yet been
| | | inserted into radix tree.
| | |- btrfs_detach_subpage()
| | |- detach_page_private();
|- radix_tree_insert() |
Then we have a metadata eb whose page has no private bit.
To avoid such race, we introduce a subpage metadata-specific member,
btrfs_subpage::eb_refs.
In alloc_extent_buffer() we increase eb_refs in the critical section of
private_lock. Then page_range_has_eb() will return true for
detach_extent_buffer_page(), and will not detach page private.
The section is marked by:
- btrfs_page_inc_eb_refs()
- btrfs_page_dec_eb_refs()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For subpage case, we need to allocate additional memory for each
metadata page.
So we need to:
- Allow attach_extent_buffer_page() to return int to indicate allocation
failure
- Allow manually pre-allocate subpage memory for alloc_extent_buffer()
As we don't want to use GFP_ATOMIC under spinlock, we introduce
btrfs_alloc_subpage() and btrfs_free_subpage() functions for this
purpose.
(The simple wrap for btrfs_free_subpage() is for later convert to
kmem_cache. Already internally tested without problem)
- Preallocate btrfs_subpage structure for alloc_extent_buffer()
We don't want to call memory allocation with spinlock held, so
do preallocation before we acquire mapping->private_lock.
- Handle subpage and regular case differently in
attach_extent_buffer_page()
For regular case, no change, just do the usual thing.
For subpage case, allocate new memory or use the preallocated memory.
For future subpage metadata, we will make use of radix tree to grab
extent buffer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For sectorsize < page size support, we need a structure to record extra
status info for each sector of a page.
Introduce the skeleton structure, all subpage related code would go to
subpage.[ch].
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
