| Age | Commit message (Collapse) | Author |
|---|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Qualcomm IPQ5424 DT binding
- da9052_wdt: add support for bootstatus bits
- Other small fixes and improvements
* tag 'linux-watchdog-6.14-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: Document Qualcomm IPQ5424
watchdog: rti_wdt: Fix an OF node leak in rti_wdt_probe()
watchdog: max77620: fix excess field in kerneldoc
watchdog: sp805_wdt: Drop documentation of non-existent `status` member
watchdog: rzv2h_wdt: Use local `dev` pointer in probe
watchdog: da9052_wdt: add support for bootstatus bits
watchdog: sp805: Report correct timeleft at maximum
watchdog: rti: Fix off-by-one in heartbeat recovery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
rti_wdt_probe() does not release the OF node reference obtained by
of_parse_phandle(). Add a of_node_put() call.
This was found by an experimental verification tool that I am
developing. Due to the lack of the actual device, no runtime test was
able to be performed.
Fixes: f20ca595ae23 ("watchdog:rit_wdt: Add support for WDIOF_CARDRESET")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250105111718.4184192-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The wdt_info does not exist in the struct being documented.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412281555.YMBF9azh-lkp@intel.com/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241230-max77620_wdt-kerneldoc-fix-v1-1-8a3211818993@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove the documentation for the `status` field in the `sp805_wdt`
structure, as the field does not exist.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213192858.916377-1-prabhakar.csengg@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update the `rzv2h_wdt_probe()` function to consistently use the local
`dev` pointer, which is already extracted from `&pdev->dev`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213171157.898934-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable support for these bootstatus bits:
WDIOF_CARDRESET
WDIOF_OVERHEAT
WDIOF_POWERUNDER
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-2-95a5756e9ac8@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
sp805_wdt::load_val is of type unsigned int. When the interrupt is
inactive wdt_timeleft adds one to the value, and then adds that to the
value used to calculate the time remaining. Unfortunately it's not
unlikely that load_val contains LOAD_MAX, which is 0xFFFFFFFF and wraps
to zero when one is added to it, resulting in the time left being
understated by about 21.7s. Fix this by ensuring the addition happens as
64-bit.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241203095744.3001795-1-mac@mcrowe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to AM62x TRM WDT period is (RTIDWDPRLD + 1) * (2^13) / RTICLK1,
Fix the heartbeat recovery. In practice this doesn't affect rounded
heatbeat in seconds, but it does correct 4% of error in milliseconds,
for, say, default 60s heartbeat. This affects last_ping calculation.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241126073646.126752-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The commit 3ab1663af6c1 ("watchdog: stm32_iwdg: Add pretimeout support")
introduces the support for the pre-timeout interrupt.
The support for this interrupt is optional but the driver uses the
platform_get_irq() which produces an error message during the driver
probe if we don't have any `interrupts` property in the DT.
Use the platform_get_irq_optional() API to get rid of the error message
as this property is optional.
Fixes: 3ab1663af6c1 ("watchdog: stm32_iwdg: Add pretimeout support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241218092227.771133-1-clement.legoffic@foss.st.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
Currently "timeout-sec" Device Tree property is being silently ignored:
even though watchdog_init_timeout() is being used, the driver always passes
"heartbeat" == DEFAULT_HEARTBEAT == 60 as argument.
Fix this by setting struct watchdog_device::timeout to DEFAULT_HEARTBEAT
and passing real module parameter value to watchdog_init_timeout() (which
may now be 0 if not specified).
Cc: stable@vger.kernel.org
Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241107203830.1068456-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Adds the compatibles and drvdata for the ExynosAuto V920 SoC. This SoC
is almost similar to ExynosAutoV9, but some CPU configurations are quite
different, so it should be added. Plus it also support DBGACK like as
GS101 SoC.
Signed-off-by: Byoungtae Cho <bt.cho@samsung.com>
Signed-off-by: Taewan Kim <trunixs.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241021063903.793166-3-trunixs.kim@samsung.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the Top Reset Generation Unit/Watchdog Timer found on
MT6735.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-3-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Clear the IRQ enable bit of WDT_MODE before asserting software reset
in order to make TOPRGU issue a system reset signal instead of an IRQ.
Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-2-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
PMU regs"
This reverts commit 746f0770f916e6c48e422d6a34e67eae16707f0e.
Now that we can register a SoC specific regmap with syscon using
of_syscon_register_regmap() api we can switch back to using
syscon_regmap_lookup_by_phandle() in the client drivers.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241029191131.2329414-1-peter.griffin@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241015164732.4085249-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/watchdog/ to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241010203622.839625-4-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241025063441.3494837-1-james.hilliard1@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use __maybe_unused notation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-2-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.
Make it a member of the da9063 structure instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver has a number of issues (accesses arbitrary I/O ports
without identifying the hardware, doesn't document what hardware it
supports, suspiciously inconsistent locking model, doesn't implement
WDIOC_SETTIMEOUT, potential integer overflow...)
The driver was added in 2003 and there's no evidence that it has any
recent user, all changes seem to be tree-wide, subsystem-wide, or the
result of static code analysis. So I believe we should simply drop
this legacy piece of code.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Message-ID: <20241011170710.484a257a@endymion.delvare>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241022114731.31f69c94@endymion.delvare
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for Airoha EN7851 watchdog. This is a very basic watchdog
with no pretimeout support, max timeout is 28 seconds and it ticks based
on half the SoC BUS clock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241011104411.28659-2-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20241004200314.5459-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-8-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-7-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-6-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-5-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-4-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-3-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
So far, only 'watchdog_register_device' prints an error if registering
the watchdog driver fails. '__watchdog_register_device' doesn't.
Refactor the code so that both print out. Drivers can then rely on that
and skip their own error messages.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
No need for it with devm_platform_ioremap_resource. Simplifies probe
slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241003214508.121107-1-rosenp@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Apple A8X SoC seems to be slowest at resetting, taking up to around
125ms to reset. Wait 150ms to be safe here.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241001170018.20139-3-towinchenmi@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Although there is an existing code comment about flushing the writes,
writes were not actually being flushed.
Actually flush the writes by changing readl_relaxed() to readl().
Fixes: 4ed224aeaf661 ("watchdog: Add Apple SoC watchdog driver")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241001170018.20139-2-towinchenmi@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The STM32MP15xx IWDG adds registers which permit this IP to generate
pretimeout interrupt. This interrupt can also be used to wake the CPU
from suspend. Implement support for generating this interrupt and let
userspace configure the pretimeout. In case the pretimeout is not
configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Tested-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240415134903.8084-1-marex@denx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240920153430.503212-18-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In the current implementation, the value of max_hw_heartbeat_ms is set
to the timeout period expressed in milliseconds and fails to verify if
the close window percentage exceeds the maximum value that the hardware
supports.
1. Calculate max_hw_heartbeat_ms based on input clock frequency.
2. Update frequency check to require a minimum frequency of 1Mhz.
3. Limit the close and open window percent to hardware supported value
to avoid truncation.
4. If the user input timeout exceeds the maximum timeout supported, use
only open window and the framework supports the higher timeouts.
Fixes: 12984cea1b8c ("watchdog: xilinx_wwdt: Add Versal window watchdog support")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240913113230.1939373-1-harini.t@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:
...
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
...
and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.
This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.
Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240913191403.2560805-1-oocheret@cisco.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correctly spelled comments make it easier for the reader to understand
the code.
Fix typos:
'hearbeat' -> 'heartbeat',
'retrigggers' -> 'retriggers',
'funtions' -> 'functions',
'Resgister' -> 'Register'.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20240923075016.2439774-1-yanzhen@vivo.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Both drivers use I/O port accesses without declaring a dependency on
CONFIG_HAS_IOPORT. For sbc8360_wdt this causes a compile error on UML
once inb()/outb() helpers become conditional.
For sbc7240_wdt this causes no such errors with UML because this driver
depends on both x86_32 and !UML. Nevertheless add HAS_IOPORT as
a dependency for both drivers to be explicit and drop the !UML
dependency for sbc7240_wdt as it is now redundant since UML implies no
HAS_IOPORT.
Fixes: 52df67b6b313 ("watchdog: add HAS_IOPORT dependencies")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.12-rc3
|
|
Add watchdog timer support for the Congatec Board Controller.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-4-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
