summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
11 daysi915/guc: Accumulate active runtime on gt resetUmesh Nerlige Ramappa
On gt reset, if a context is running, then accumulate it's active time into the busyness counter since there will be no chance for the context to switch out and update it's run time. v2: Move comment right above the if (John) Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com (cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
11 daysi915/guc: Ensure busyness counter increases motonicallyUmesh Nerlige Ramappa
Active busyness of an engine is calculated using gt timestamp and the context switch in time. While capturing the gt timestamp, it's possible that the context switches out. This race could result in an active busyness value that is greater than the actual context runtime value by a small amount. This leads to a negative delta and throws off busyness calculations for the user. If a subsequent count is smaller than the previous one, just return the previous one, since we expect the busyness to catch up. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com (cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
11 daysi915/guc: Reset engine utilization buffer before registrationUmesh Nerlige Ramappa
On GT reset, we store total busyness counts for all engines and re-register the utilization buffer with GuC. At that time we should reset the buffer, so that we don't get spurious busyness counts on subsequent queries. To repro this issue, run igt@perf_pmu@busy-hang followed by igt@perf_pmu@most-busy-idle-check-all for a couple iterations. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915: Fix memory leak by correcting cache object name in error handlerJiasheng Jiang
Replace "slab_priorities" with "slab_dependencies" in the error handler to avoid memory leak. Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@outlook.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127201042.29620-1-jiashengjiangcool@gmail.com (cherry picked from commit 9bc5e7dc694d3112bbf0fa4c46ef0fa0f114937a) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915: Fix NULL pointer dereference in capture_engineEugene Kobyak
When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/color: Stop using non-posted DSB writes for legacy LUTVille Syrjälä
DSB LUT register writes vs. palette anti-collision logic appear to interact in interesting ways: - posted DSB writes simply vanish into thin air while anti-collision is active - non-posted DSB writes actually get blocked by the anti-collision logic, but unfortunately this ends up hogging the bus for long enough that unrelated parallel CPU MMIO accesses start to disappear instead Even though we are updating the LUT during vblank we aren't immune to the anti-collision logic because it kicks in briefly for pipe prefill (initiated at frame start). The safe time window for performing the LUT update is thus between the undelayed vblank and frame start. Turns out that with low enough CDCLK frequency (DSB execution speed depends on CDCLK) we can exceed that. As we are currently using non-posted writes for the legacy LUT updates, in which case we can hit the far more severe failure mode. The problem is exacerbated by the fact that non-posted writes are much slower than posted writes (~4x it seems). To mititage the problem let's switch to using posted DSB writes for legacy LUT updates (which will involve using the double write approach to avoid other problems with DSB vs. legacy LUT writes). Despite writing each register twice this will in fact make the legacy LUT update faster when compared to the non-posted write approach, making the problem less likely to appear. The failure mode is also less severe. This isn't the 100% solution we need though. That will involve estimating how long the LUT update will take, and pushing frame start and/or delayed vblank forward to guarantee that the update will have finished by the time the pipe prefill starts... Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12494 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 2504a316b35d49522f39cf0dc01830d7c36a9be4) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/dsb: Don't use indexed register writes needlesslyVille Syrjälä
Turns out the DSB indexed register write command has rather significant initial overhead compared to the normal MMIO write command. Based on some quick experiments on TGL you have to write the register at least ~5 times for the indexed write command to come out ahead. If you write the register less times than that the MMIO write is faster. So it seems my automagic indexed write logic was a bit misguided. Go back to the original approach only use indexed writes for the cases we know will benefit from it (indexed LUT register updates). Currently we shouldn't have any cases where this truly matters (just some rare double writes to the precision LUT index registers), but we will need to switch the legacy LUT updates to write each LUT register twice (to avoid some palette anti-collision logic troubles). This would be close to the worst case for using indexed writes (two writes per register, and 256 separate registers). Using the MMIO write command should shave off around 30% of the execution time compared to using the indexed write command. Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit ecba559a88ab8399a41893d7828caf4dccbeab6c) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-29Merge tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Merge window fixes, mostly amdgpu and xe, with a few other minor ones, all looks fairly normal, i915: - hdcp: Fix when the first read and write are retried xe: - Wake up waiters after wait condition set to true - Mark the preempt fence workqueue as reclaim - Update xe2 graphics name string - Fix a couple of guc submit races - Fix pat index usage in migrate - Ensure non-cached migrate pagetable bo mappings - Take a PM ref in the delayed snapshot capture worker amdgpu: - SMU 13.0.6 fixes - XGMI fixes - SMU 13.0.7 fixes - Misc code cleanups - Plane refcount fixes - DCN 4.0.1 fixes - DC power fixes - DTO fixes - NBIO 7.11 fixes - SMU 14.0.x fixes - Reset fixes - Enable DC on LoongArch - Sysfs hotplug warning fix - Misc small fixes - VCN 4.0.3 fix - Slab usage fix - Jpeg delayed work fix amdkfd: - wptr handling fixes radeon: - Use ttm_bo_move_null() - Constify struct pci_device_id - Fix spurious hotplug - HPD fix rockchip - fix 32-bit build" * tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernel: (48 commits) drm/xe: Take PM ref in delayed snapshot capture worker drm/xe/migrate: use XE_BO_FLAG_PAGETABLE drm/xe/migrate: fix pat index usage drm/xe/guc_submit: fix race around suspend_pending drm/xe/guc_submit: fix race around pending_disable drm/xe: Update xe2_graphics name string drm/rockchip: avoid 64-bit division Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable" drm/amdgpu/jpeg: cancel the jpeg worker drm/amdgpu: fix usage slab after free drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3 drm/amdgpu: Fix sysfs warning when hotplugging drm/amdgpu: Add sysfs interface for vcn reset mask drm/amdgpu/gmc7: fix wait_for_idle callers drm/amd/pm: Remove arcturus min power limit drm/amd/pm: skip setting the power source on smu v14.0.2/3 drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3 drm/amdkfd: Use the correct wptr size drm/xe: Mark preempt fence workqueue as reclaim drm/xe/ufence: Wake up waiters after setting ufence->signalled ...
2024-11-25Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "resource: A couple of cleanups" from Andy Shevchenko performs some cleanups in the resource management code - The series "Improve the copy of task comm" from Yafang Shao addresses possible race-induced overflows in the management of task_struct.comm[] - The series "Remove unnecessary header includes from {tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a small fix to the list_sort library code and to its selftest - The series "Enhance min heap API with non-inline functions and optimizations" also from Kuan-Wei Chiu optimizes and cleans up the min_heap library code - The series "nilfs2: Finish folio conversion" from Ryusuke Konishi finishes off nilfs2's folioification - The series "add detect count for hung tasks" from Lance Yang adds more userspace visibility into the hung-task detector's activity - Apart from that, singelton patches in many places - please see the individual changelogs for details * tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) gdb: lx-symbols: do not error out on monolithic build kernel/reboot: replace sprintf() with sysfs_emit() lib: util_macros_kunit: add kunit test for util_macros.h util_macros.h: fix/rework find_closest() macros Improve consistency of '#error' directive messages ocfs2: fix uninitialized value in ocfs2_file_read_iter() hung_task: add docs for hung_task_detect_count hung_task: add detect count for hung tasks dma-buf: use atomic64_inc_return() in dma_buf_getfile() fs/proc/kcore.c: fix coccinelle reported ERROR instances resource: avoid unnecessary resource tree walking in __region_intersects() ocfs2: remove unused errmsg function and table ocfs2: cluster: fix a typo lib/scatterlist: use sg_phys() helper checkpatch: always parse orig_commit in fixes tag nilfs2: convert metadata aops from writepage to writepages nilfs2: convert nilfs_recovery_copy_block() to take a folio nilfs2: convert nilfs_page_count_clean_buffers() to take a folio nilfs2: remove nilfs_writepage nilfs2: convert checkpoint file to be folio-based ...
2024-11-21Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ...
2024-11-19Merge tag 'timers-core-2024-11-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...
2024-11-19Merge tag 'timers-vdso-2024-11-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull vdso data page handling updates from Thomas Gleixner: "First steps of consolidating the VDSO data page handling. The VDSO data page handling is architecture specific for historical reasons, but there is no real technical reason to do so. Aside of that VDSO data has become a dump ground for various mechanisms and fail to provide a clear separation of the functionalities. Clean this up by: - consolidating the VDSO page data by getting rid of architecture specific warts especially in x86 and PowerPC. - removing the last includes of header files which are pulling in other headers outside of the VDSO namespace. - seperating timekeeping and other VDSO data accordingly. Further consolidation of the VDSO page handling is done in subsequent changes scheduled for the next merge window. This also lays the ground for expanding the VDSO time getters for independent PTP clocks in a generic way without making every architecture add support seperately" * tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/vdso: Add missing brackets in switch case vdso: Rename struct arch_vdso_data to arch_vdso_time_data powerpc: Split systemcfg struct definitions out from vdso powerpc: Split systemcfg data out of vdso data page powerpc: Add kconfig option for the systemcfg page powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors powerpc/pseries/lparcfg: Fix printing of system_active_processors powerpc/procfs: Propagate error of remap_pfn_range() powerpc/vdso: Remove offset comment from 32bit vdso_arch_data x86/vdso: Split virtual clock pages into dedicated mapping x86/vdso: Delete vvar.h x86/vdso: Access vdso data without vvar.h x86/vdso: Move the rng offset to vsyscall.h x86/vdso: Access rng vdso data without vvar.h x86/vdso: Access timens vdso data without vvar.h x86/vdso: Allocate vvar page from C code x86/vdso: Access rng data from kernel without vvar x86/vdso: Place vdso_data at beginning of vvar page x86/vdso: Use __arch_get_vdso_data() to access vdso data x86/mm/mmap: Remove arch_vma_name() ...
2024-11-19Merge tag 'random-6.13-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "This contains a single series from Uros to replace uses of <linux/random.h> with prandom.h or other more specific headers as needed, in order to avoid a circular header issue. Uros' goal is to be able to use percpu.h from prandom.h, which will then allow him to define __percpu in percpu.h rather than in compiler_types.h" * tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: Include <linux/percpu.h> in <linux/prandom.h> random: Do not include <linux/prandom.h> in <linux/random.h> netem: Include <linux/prandom.h> in sch_netem.c lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h> lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h> bpf/tests: Include <linux/prandom.h> instead of <linux/random.h> lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h> random32: Include <linux/prandom.h> instead of <linux/random.h> kunit: string-stream-test: Include <linux/prandom.h> lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h> bpf: Include <linux/prandom.h> instead of <linux/random.h> scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h> fscrypt: Include <linux/once.h> in fs/crypto/keyring.c mtd: tests: Include <linux/prandom.h> instead of <linux/random.h> media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c drm/lib: Include <linux/prandom.h> instead of <linux/random.h> drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h> crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h> x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
2024-11-19drm/i915/hdcp: Fix when the first read and write are retriedSuraj Kandpal
Make sure that the first read/write in hdcp2_authentication_key_exchange are only retried when we have either DP/DPMST encoder connected, since we do this to give docks and dp encoders some extra time to get their HDCP DPCD registers ready only for DP/DPMST encoders as this issue is only observed here no need to burden other encoders with extra retries as this causes the HDMI connector to have some other timing issue and fails HDCP authentication. --v2 -Add intent of patch [Chaitanya] -Add reasoning for loop [Jani] -Make sure we forfiet the 50ms wait for non DP/DPMST encoders. --v3 -Remove the is_dp_encoder check [Jani/Chaitanya] -Make the commit message more clearer [Jani] Fixes: 9d5a05f86d2f ("drm/i915/hdcp: Retry first read and writes to downstream") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104035951.517837-1-suraj.kandpal@intel.com (cherry picked from commit 44499559496c1dac43583f4387d38de1b612a69b) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-11-18Merge tag 'vfs-6.13.file' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs file updates from Christian Brauner: "This contains changes the changes for files for this cycle: - Introduce a new reference counting mechanism for files. As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has O(N^2) behaviour under contention with N concurrent operations and it is in a hot path in __fget_files_rcu(). The rcuref infrastructures remedies this problem by using an unconditional increment relying on safe- and dead zones to make this work and requiring rcu protection for the data structure in question. This not just scales better it also introduces overflow protection. However, in contrast to generic rcuref, files require a memory barrier and thus cannot rely on *_relaxed() atomic operations and also require to be built on atomic_long_t as having massive amounts of reference isn't unheard of even if it is just an attack. This adds a file specific variant instead of making this a generic library. This has been tested by various people and it gives consistent improvement up to 3-5% on workloads with loads of threads. - Add a fastpath for find_next_zero_bit(). Skip 2-levels searching via find_next_zero_bit() when there is a free slot in the word that contains the next fd. This improves pts/blogbench-1.1.0 read by 8% and write by 4% on Intel ICX 160. - Conditionally clear full_fds_bits since it's very likely that a bit in full_fds_bits has been cleared during __clear_open_fds(). This improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on Intel ICX 160. - Get rid of all lookup_*_fdget_rcu() variants. They were used to lookup files without taking a reference count. That became invalid once files were switched to SLAB_TYPESAFE_BY_RCU and now we're always taking a reference count. Switch to an already existing helper and remove the legacy variants. - Remove pointless includes of <linux/fdtable.h>. - Avoid cmpxchg() in close_files() as nobody else has a reference to the files_struct at that point. - Move close_range() into fs/file.c and fold __close_range() into it. - Cleanup calling conventions of alloc_fdtable() and expand_files(). - Merge __{set,clear}_close_on_exec() into one. - Make __set_open_fd() set cloexec as well instead of doing it in two separate steps" * tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor fs: port files to file_ref fs: add file_ref expand_files(): simplify calling conventions make __set_open_fd() set cloexec state as well fs: protect backing files with rcu file.c: merge __{set,clear}_close_on_exec() alloc_fdtable(): change calling conventions. fs/file.c: add fast path in find_next_fd() fs/file.c: conditionally clear full_fds fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd() move close_range(2) into fs/file.c, fold __close_range() into it close_files(): don't bother with xchg() remove pointless includes of <linux/fdtable.h> get rid of ...lookup...fdget_rcu() family
2024-11-12drm/i915: Grab intel_display from the encoder to avoid potential oopsiesVille Syrjälä
Grab the intel_display from 'encoder' rather than 'state' in the encoder hooks to avoid the massive footgun that is intel_sanitize_encoder(), which passes NULL as the 'state' argument to encoder .disable() and .post_disable(). TODO: figure out how to actually fix intel_sanitize_encoder()... Fixes: ab0b0eb5c85c ("drm/i915/tv: convert to struct intel_display") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241107161123.16269-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit dc3806d9eb66d0105f8d55d462d4ef681d9eac59) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-11-12drm/i915/gsc: ARL-H and ARL-U need a newer GSC FW.Daniele Ceraolo Spurio
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are only supported in newer blobs. In particular, ARL-S is supported starting from 102.0.10.1878 (which is already the minimum required version for ARL in the code), while ARL-H and ARL-U are supported from 102.1.15.1926. Therefore, the driver needs to check which specific ARL subplatform its running on when verifying that the GSC FW is new enough for it. Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com (cherry picked from commit 3c1d5ced18db8a67251c8436cf9bdc061f972bdb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-11-07drm/i915/request: Remove unnecessary modification of hrtimer:: FunctionNam Cao
When a request is created, the hrtimer is not initialized and only its 'function' field is set to NULL. The hrtimer is only initialized when the request is enqueued. The point of setting 'function' to NULL is that, it can be used to check whether hrtimer_try_to_cancel() should be called while retiring the request. This "trick" is unnecessary, because hrtimer_try_to_cancel() already does its own check whether the timer is armed. If the timer is not armed, hrtimer_try_to_cancel() returns 0. Fully initialize the timer when the request is created, which allows to make the hrtimer::function field private once all users of hrtimer_init() are converted to hrtimer_setup(), which requires a valid callback function to be set. Because hrtimer_try_to_cancel() returns 0 if the timer is not armed, the logic to check whether to call i915_request_put() remains equivalent. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/50f865045aa672a9730343ad131543da332b1d8d.1730386209.git.namcao@linutronix.de
2024-11-05drm: replace strcpy() with strscpy()Yafang Shao
To prevent errors from occurring when the src string is longer than the dst string in strcpy(), we should use strscpy() instead. This approach also facilitates future extensions to the task comm. Link: https://lkml.kernel.org/r/20241007144911.27693-8-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Suggested-by: Justin Stitt <justinstitt@google.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Justin Stitt <justinstitt@google.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Alejandro Colomar <alx@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Jan Kara <jack@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matus Jokay <matus.jokay@stuba.sk> Cc: Ondrej Mosnacek <omosnace@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Quentin Monnet <qmo@kernel.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Simon Horman <horms@kernel.org> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-06Merge tag 'drm-intel-next-2024-11-04' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.13: Features and functionality: - Pantherlake (PTL) Xe3 LPD display enabling for xe driver (Clint, Suraj, Dnyaneshwar, Matt, Gustavo, Radhakrishna, Chaitanya, Haridhar, Juha-Pekka, Ravi) - Enable dbuf overlap detection on Lunarlake and later (Stanislav, Vinod) - Allow fastset for HDR infoframe changes (Chaitanya) - Write DP source OUI also for non-eDP sinks (Imre) Refactoring and cleanups: - Independent platform identification for display (Jani) - Display tracepoint fixes and cleanups (Gustavo) - Share PCI ID headers between i915 and xe drivers (Jani) - Use x100 version for full version and release checks (Jani) - Conversions to struct intel_display (Jani, Ville) - Reuse DP DPCD and AUX macros in gvt instead of duplication (Jani) - Use string choice helpers (R Sundar, Sai Teja) - Remove unused underrun detection irq code (Sai Teja) - Color management debug improvements and other cleanups (Ville) - Refactor panel fitter code to a separate file (Ville) - Use try_cmpxchg() instead of open-coding (Uros Bizjak) Fixes: - PSR and Panel Replay fixes and workarounds (Jouni) - Fix panel power during connector detection (Imre) - Fix connector detection and modeset races (Imre) - Fix C20 PHY TX MISC configuration (Gustavo) - Improve panel fitter validity checks (Ville) - Fix eDP short HPD interrupt handling while runtime suspended (Imre) - Propagate DP MST DSC BW overhead/slice calculation errors (Imre) - Stop hotplug polling for eDP connectors (Imre) - Workaround panels reporting bad link status after PSR enable (Jouni) - Panel Replay VRR VSC SDP related workaround and refactor (Animesh, Mitul) - Fix memory leak on eDP init error path (Shuicheng) - Fix GVT KVMGT Kconfig dependencies (Arnd Bergmann) - Fix irq function documentation build warning (Rodrigo) - Add platform check to power management fuse bit read (Clint) - Revert kstrdup_const() and kfree_const() usage for clarity (Christophe JAILLET) - Workaround horizontal odd panning issues in display versions 20 and 30 (Nemesa) - Fix xe drive HDCP GSC firmware check (Suraj) Merges: - Backmerge drm-next to get some KVM changes (Rodrigo) - Fix a build failure originating from previous backmerge (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/display/intel_dp_mst.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87h68ni0wd.fsf@intel.com
2024-11-04drm/i915/display: Allow fastset for change in HDR infoframeChaitanya Kumar Borah
Changes in Dynamic Range and Mastering infoframe should not trigger a full modeset. Therefore, allow fastset. DP SDP programming is already hooked up in the fastset flow but HDMI AVI infoframe update is not, add it. Any other infoframe that can be fastset should be added to the helper intel_hdmi_fastset_infoframes(). v3: - Create a wrapper intel_ddi_update_pipe_hdmi to stick to uniform naming (Jani) - Do not disable HDMI AVI infoframe if already disabled (Uma) v2: - Update HDMI AVI infoframe during fastset. Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023044122.3889137-1-chaitanya.kumar.borah@intel.com
2024-11-04drm/i915/psr: WA for panels stating bad link status after PSR is enabledJouni Högander
We are currently seeing unexpected link trainings with several different eDP panels. These are caused by these panels stating bad link status in their dpcd registers. This can be observed by doing following test: 1. Boot up without Xe module loaded 2. Load Xe module with PSR disabled: $ modprobe xe enable_psr=0 3. Read panel link status register $ dpcd_reg read --offset 0x200e --count=1 0x200e: 00 4. Enable PSR, sleep for 2 seconds and disable PSR again: $ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug $ echo "-1" > /sys/kernel/debug/dri/0000:00:02.0/xe_params/enable_psr $ echo 0x0 > /sys/kernel/debug/dri/0/i915_edp_psr_debug $ sleep 2 $ cat /sys/kernel/debug/dri/0/i915_edp_psr_status | grep status $ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug Source PSR/PanelReplay status: DEEP_SLEEP [0x80310030] 5. Now read panel link status registers again: $ dpcd_reg read --offset 0x200e --count=1 0x200e: 80 Workaround this by not trusting link status registers after PSR is enabled until first short pulse interrupt is received. v2: - clear link_ok flag on pipe disable - remove useless comment - modify intel_dp_needs_link_retrain return statement Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029122415.1789528-1-jouni.hogander@intel.com
2024-11-04drm/i915/dp: Add FEC Enable Retry mechanismChaitanya Kumar Borah
Currently, even though there is a bit to control FEC enable/disable individually, the FEC Decode Enable sequence is sent by the SOC only once TRANS_CONF enable is set. This ties the FEC enabling too tightly to modeset and therefore cannot be re-issued (in case of failure) without a modeset. From PTL, FEC_DECODE_EN sequence can be sent to a DPRX independent of TRANS_CONF enable. This allows us to re-issue an FEC_DECODE_EN sequence without a modeset. Hence allowing us to have a retry mechanism in case the DPRX does not respond with an FEC_ENABLE within certain amount of time. While at it, replace struct drm_i915_private with struct intel_display v4: - More code refactor [Jani] - use struct intel_display [Jani] - Optimize logging [Jani] v3: - Make the commit message more legible [Jani] - Refactor code to re-use existing code [Jani] - Do away with platform dependent FEC enable checks [Jani] v2: - Refactor code to avoid duplication and improve readability [Jani] - In case of PTL, wait for FEC status directly after FEC enable [Srikanth] - Wait for FEC_ENABLE_LIVE_STATUS to be cleared before re-enabling FEC [Srikanth] Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241024061002.4085137-1-chaitanya.kumar.borah@intel.com
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-11-01drm/i915/display: Fuse bit for power management disable removedClint Taylor
Starting with display version 13 the fuse bit to disable Display PM has been removed. v2: Bit removed starting with display version 13 (MattR) v3: DG2 still uses this fuse bit (MattR) Bspec: 50075, 69464 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030195507.2753404-1-clinton.a.taylor@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-11-01Merge tag 'drm-misc-next-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: All of the previous pull request, with MORE! Core Changes: - Update documentation for scheduler start/stop and job init. - Add dedede and sm8350-hdk hardware to ci runs. Driver Changes: - Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d, panthor docs, and leadtek-ltk050h3146w. - Crashdump support for qaic. - Support DP compliance in zynqmp. - Add Samsung S6E88A0-AMS427AP24 panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
2024-10-31drm/i915: Implement Dbuf overlap detection feature starting from LNLStanislav Lisovskiy
From LNL onwards there is a new hardware feature, which allows to detect if the driver wrongly allocated DBuf entries and they happen to overlap. If enabled this will cause a specific interrupt to occur. We now handle it in the driver, by writing correspondent error message to kernel log. v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula) v3: Unmask the overlap detection interrupt (Uma) v4: use display over i915 (Jani Nikula) v5: Use display instead of dev_priv (Jani Nikula) v6: rebased to resolve merge conflicts Bspec: 69450, 69464 Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
2024-10-31drm/i915/dp: Write the source OUI for non-eDP sinks as wellImre Deak
At least the i-tec USB-C Nano 2x Display Docking Station (containing a Synaptics MST branch device) requires the driver to update the source OUI DPCD registers to expose its DSC capability. Accordingly update the OUI for all sink types (besides eDP where this has been done already). v2: Rebased on latest patch version. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11776 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-9-imre.deak@intel.com
2024-10-31drm/i915/dp: Write the source OUI during connector detectionImre Deak
The DP sink's capabilities, like DSC, may depend on the source OUI written to the sink. On eDP this OUI value could have been reset before the detection started if the panel power on it got disabled. Make sure the OUI is re-written at the beginning of detection in this case, before the sink capabilities are read out. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-8-imre.deak@intel.com
2024-10-31drm/i915/dp: Write the source OUI for eDP before detecting sink capabilitiesImre Deak
The eDP sink's capabilities, like DSC, may depend on the source OUI written to the sink, so ensure the OUI is written before reading out the capabilities. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-7-imre.deak@intel.com
2024-10-31drm/i915/dp: Reuse intel_dp_detect_dsc_caps() for eDPImre Deak
Reuse intel_dp_detect_dsc_caps() which already checks for the source's DSC cap and retrieves the DPCD version from the DPRX caps. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-6-imre.deak@intel.com
2024-10-31drm/i915/dp: Track source OUI validity explicitlyImre Deak
While updating the source OUI on the sink the driver should avoid writing the OUI if it's already up-to-date to prevent the sink from resetting itself in response to the update. On eDP - the only output type where the OUI was updated so far - the driver ensured this by comparing the current source OUI DPCD register values with the expected Intel OUI value, skipping the update in case of a match. On some non-eDP sinks - at least on Synaptics branch devices - this method doesn't work, since the source OUI DPCD registers read back as all 0, even after updating the registers. Handle the above kind of sinks by tracking when the OUI was updated and so should be valid, regardless of what the DPCD registers contain. eDP sinks reset the written source OUI value when the panel power is disabled, invalidate the OUI state accordingly. This is required by a follow-up patch updating the source OUI for non-eDP sink types as well. v2: Fix setting intel_dp::oui_valid=true, if the DPCD register contains already the expected value. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-5-imre.deak@intel.com
2024-10-31drm/i915/dp: Initialize the source OUI write timestamp alwaysImre Deak
If the source OUI DPCD register value matches the expected Intel OUI value, the write timestamp doesn't get updated leaving it at the 0 initial value if the OUI wasn't written before. This can lead to an incorrect wait duration in intel_dp_wait_source_oui(), since jiffies is not inited to 0 in general (on a 32 bit system INITIAL_JIFFIES is set to 5 minutes ahead of wrap-around). Fix this by intializing the write timestamp in the above case as well. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-4-imre.deak@intel.com
2024-10-31drm/i915/dp: Ensure panel power remains enabled during connector detectionImre Deak
The sink's capabilities, like the DSC caps, depend on the source OUI written to the sink's DPCD registers and so this OUI value should be valid for the whole duration of the detection. An eDP sink will reset this OUI value when the panel power is disabled, so prevent the disabling - happening by default after a 1 sec idle period - for the whole duration of detection. v2: Update the documentation for intel_pps_on(). (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-3-imre.deak@intel.com
2024-10-31drm/i915/dp: Flush modeset commits during connector detectionImre Deak
Make sure that a DP connector detection doesn't happen in parallel with an ongoing modeset on the connector. The reasons for this are: - Besides reading the capabilities, EDID etc. the detection may change the state of the sink (via the AUX bus), for instance by setting the LTTPR mode or the source OUI (the latter introduced by an upcoming patch). It's better to avoid such changes affecting an onging modeset in any way. - During a modeset's link training any access to DPCD registers, besides the registers used for link training should be avoided, at least in the LTTPR non-transparent and transparent link training modes. Such asynchronous accesses - besides connector detection - can also happen via the AUX device node for instance, for those a parallel modeset will have to be avoided in a similar way to the change in this patch. (A topic for a follow-up change.) - The source OUI written to an eDP sink is valid only while the panel power is enabled. A modeset on eDP will enable/disable the panel power synchronously; this should be prevented in the middle of the connector detection, to ensure a consistent sink state (which depends on the source OUI) for the whole duration of detection. The panel power could still get disabled during detection after an idle period (1 sec), this will be prevented by the next patch. v2: (Ville) - s/wait_for_crtc_hw_done/wait_for_connector_hw_done - Get drm_device using an intel_display instead of drm_i915_private ptr. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-2-imre.deak@intel.com
2024-10-30drm/i915/display: use x100 version for full version and releaseJani Nikula
Use x100, or ver * 100 + rel, versions for full IP version checks, similar to what xe driver does: - Replace IP_VER(14, 1) inline with 1401, etc. - Convert DISPLAY_VER_FULL() to DISPLAY_VERx100() - Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100() - Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP() This makes ver.rel versions easier to use, follows the xe driver pattern, and drops the dependency on the IP_VER() macro. v2: Rebase, drop IP_VER() from xe compat headers v3: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
2024-10-30drm/i915/de: remove unnecessary generic wrappersJani Nikula
With many of the intel_de_* callers switched over to struct intel_display, we can remove some of the unnecessary generic wrappers. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/82da66027a122b336278daa2c9a9eb39843082ba.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/dsi: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch ICL DSI code over to it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f62a3616ef15e02cf19c5d041656fc6e09b37f6a.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/ips: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch HSW IPS code over to it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/66060d0c3fbb20e5d2c98a92133f091de6b25230.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/power: convert assert_chv_phy_status() to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch assert_chv_phy_status() and its callers to it. Main motivation to do just one function is to stop passing i915 to intel_de_wait(), so its generic wrapper can be removed. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/de6b01e1f21934ff520aa3b49ab5f97cbbf028f2.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/display: convert vlv_wait_port_ready() to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch vlv_wait_port_ready() over to it. The main motivation to do just one function is to stop passing i915 to intel_de_wait(), so its generic wrapper can be removed. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9505ea49dfc8c7a52cacd2749875a680b01e5bbd.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/crt: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch CRT code over to it. v2: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029105257.391572-1-jani.nikula@intel.com
2024-10-30drm/i915/dp/hdcp: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch DP HDCP code over to it. v2: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029090422.198749-1-jani.nikula@intel.com
2024-10-30drm/i915/hdcp: further conversion to struct intel_displayJani Nikula
There are some unconverted stragglers left in the HDCP API still using struct drm_i915_private. Convert to struct intel_display. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9680cc9e5ed7798a736fa73ad9ea0eb9c88e64bb.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/dpio: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch DPIO PHY code over to it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1138083101f3c9058284592009b25f41065fbe30.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/cx0: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch Cx0 PHY code over to it. v2: Rebase, split out the include cleanups (Rodrigo) v3: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029160822.800097-1-jani.nikula@intel.com
2024-10-30drm/i915/cx0: remove unnecessary includesJani Nikula
There's nothing in the header that requires the bit or bitfield headers. Remove. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e12f1d5ab17e501e4700044072fbb6dd9b2f459.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/gmbus: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch gmbus code over to it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d784e4799ab5095baa5c8fd840920066878c6273.1730146000.git.jani.nikula@intel.com
2024-10-30drm/i915/vblank: use display->platform.<platform> instead of IS_<PLATFORM>()Jani Nikula
Switch to using the new display->platform.<platform> members for platform identification in display code. v2: Split out an unrelated hunk to a separate patch (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ed7295a7246bf00d8ae39f78c78dcc842c6939d9.1730144869.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>