| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.
[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There are a few cleanup and refactoring tasks that need to be done
with the DML2.1 wrapper and DC interface to remove dependencies on
legacy structures and N-1 prototypes.
[How]
Implemented pipe_ctx->global_sync.
Implemented new functions to use pipe_ctx->hubp_regs and
pipe_ctx->global_sync:
- hubp_setup2
- hubp_setup_interdependent2
- Several other new functions for DCN 4.01 to support newer structures
Removed dml21_update_pipe_ctx_dchub_regs
Removed dml21_extract_legacy_watermark_set
Removed dml21_populate_pipe_ctx_dlg_param
Removed outdated dcn references in DML2.1 wrapper.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On entering/exiting idle power, certain parameters would be
very useful to know for power profiling purposes.
[HOW]
This commit adds certain hard min clocks and pipe types
to log output on idle optimization enter/exit.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The `dc_tiling_info` union previously did not have a field to
specify the active GFX format, assuming only one format would
be used per DCN version. from DCN4+, support for switching
between different GFX formats is introduced, requiring a way
to track which format is currently in use.
[HOW]
Updated the `dc_tiling_info` union to include a new field that
explicitly indicates the currently used GFX format.
This allows the system to determine the active GFX format
and take the correct programming path accordingly.
[Description]
The union `dc_tiling_info` has been updated to support multiple
GFX formats by adding a new field for identifying the active format.
This update ensures that the correct programming path is followed
based on the selected format. All references to `dc_tiling_info`
in the codebase have been updated to reflect the new structure.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We like to have pretrain for dpia link so that dp and dp tunneling
have aligned behavior. The Main difficult for dpia pretrain is that
encoder can not get corresponded dpia port when link detection
in current implementation.
[HOW]
1. create enable/disable dpia output functions for dcn35 encoder
and have dpia_id and other necessary info as inputs.
2. dcn35 dpia use the new functions to enable/disable output.
3. have a option to enable/disable the change.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Since now we can set multiple crc windows for secure display, add a new input
parameter for dc_stream_get_crc to indicate to fetch crc from which crc
engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This adds clear_tiling callbacks to the mi structure that
will be used for drm panic support to clear the tiling on
a display. Mem input (mi) is used on DCE based display
IPs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
|
|
This adds clear_tiling callbacks to the hubp structure that
will be used for drm panic support to clear the tiling on
a display. hubp3 support from Jocelyn's original patch
and the rest from me.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
|
|
[why]
hw register offset delta
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When C-State entry is requested, the rate limiter will be disabled
which can result in high contention in the DCHUB return path.
[HOW]
Enable the rate limiter during C-state requests to prevent contention.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Adds support for P-State stall timeout detection in DCHUBBUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is a known HW bug that causes the internal 3DLUT fetch signal to
be lost at VREADY, regardless of whether the OTG lock is being held or
not. A workaround is necessary to make sure that this internal signal
stays up after OTG unlock.
[How]
Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also
use VUPDATE_KEEPOUT to prevent lock transition in the region between
VSTARTUP and VREADY, which could cause issues with this WA sequence.
Also including misc. 3DLUT DMA-related sequence fixes to address a few
regressions causing corruption.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c.
It is causing graphics hangs.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DML21 does not allocate DET evenly between pipes.
May result in underflow when unlocking the pipes as DET could
be overallocated.
[How]
1. Unlock pipes that have a decreased amount of DET allocation
2. Wait for the double buffer to be updated.
3. Unlock the remaining pipes.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove function pointers that were never used.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN_MINIMUM_DISPCLK_Khz and DCN_MINIMUM_DPPCLK_Khz is declared twice.
This commit removes that duplication.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When pre-OS firmware enables display support for displays that operate
the DIG in 2 pixels per cycle processing modes the inferred pixel rate
from get_pixel_clk_frequency_100hz does not account for the true pixel
rate since we're outputting 2 per cycle past the stream encoder.
This causes seamless boot validation to abort early.
[How]
Add a new stream encoder function for getting pixels per cycle from the
stream encoder. If the pixels per cycle is greater than 1 and the driver
policy is to enable 2 pixels per cycle for post-OS then allow seamless
boot to continue.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use more accurate names to refer to the asic architecture.
dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x
dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig FE/BE FIFO was not switched.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
why:
New scaler needs the input to be full range color space. This will also fix
issues that come up due to not having a predefined limited color space matrix
for certain color spaces
how:
Use bias and scale HW to expand the range of limited color spaces to full
before the scaler
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The mux to switch between refclk and dto_dsc_clk is non double buffered.
However dto dsc clk's phase and modulo divider registers are currently
configured as double buffered update. This causes a problem when we switch to
use dto dsc clk and program phase and modulo in the same sequence. In this
sequence dsc clk is switched to dto but the clock divider programming doesn't
take effect until next frame. When we try to program DSCC registers, SMN bus
will hang because dto dsc clk divider phase is set to 0.
[how]
Configure phase and modulo to take effect immediately. Always switch to dto dsc
clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Added clock logs to automate DPM testing
[How]
Added logs and helper functions to output clocks
Co-authored-by: Ryan Seto <ryanseto@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Due to a HW bug, HBR audio is not supported for
DP2 encoders for certain ASICs.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit is a part of a series that addresses the following build
warning for opp:
./drivers/gpu/drm/amd/display/dc/inc/hw/opp.h:1: warning: no structured
comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h:1: warning: no structured
comments found
This commit fixes this issue by adding a simple kernel-doc to a struct
in the opp.h and the dpp.h files.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the warning:
Function parameter or struct member 'program_3dlut_size' not described in
'mpc_funcs'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20240715090445.7e9387ec@canb.auug.org.au/
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add registers and entry points to enable DCC on DCN4x
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
We must wait for ODM double buffer updates to complete
before exiting the pipe update sequence or we may reduce
DISPCLK and hit some transient underflow (pixel rate is
reduced before the pipes have ODM enabled).
Reviewed-by: Samson Tam <samson.tam@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Two additional virtual links are created and thus increasing size
for dc->links by two.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Page table definition increased up to 2MB.
[How]
Define new use case of page table for VA.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In order to support glitchless display clock ramping for virtual stream,
we must
turn on symclk for stream encoder. The code will power on phy and enable
symclk
for dio encoder during virtual stream dpms sequence.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix most of the display documentation compile warnings by
documenting struct mpc_funcs functions in dc/inc/hw/mpc.h file.
Remove the following warnings:
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'read_mpcc_state' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'mpc_init_single_inst' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp_from_secondary' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'wait_for_idle' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'assert_mpcc_idle_before_connect' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'init_mpcc_list_from_hw' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm_clamp' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_csc' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_ocsc_default' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_gamma' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'power_on_mpc_mem_pwr' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_dwb_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'disable_dwb_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'is_dwb_idle' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_out_rate_control' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_gamut_remap' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_1dlut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_shaper' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'acquire_rmu' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_3dlut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'release_rmu' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpc_out_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_bg_color' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_mpc_mem_lp_mode' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_movable_cm_location' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'update_3dlut_fast_load_select' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_3dlut_fast_load_status' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'populate_lut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_read_write_control' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_mode' not described in 'mpc_funcs'
Fixes: b8c1c3a82e75 ("Documentation/gpu: Add kernel doc entry for MPC")
Closes: https://lore.kernel.org/linux-next/20240130134954.04fcf763@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit c49e44ede5cdfe650c2f769d8bd58cbe289e87cd.
This causes regression on DP link layer test.
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Enable root clock optimization for SYMCLK and only
disable it when it's actively used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
After a non-3dlut test the MPCC_MCM_3DLUT_MODE::MPCC_MCM_3DLUT_SIZE is
incorrect.
[HOW]
Add register write to make valid.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Adam Nelson <adnelson@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Switching between DSC clock or disable DSC block are not double buffered update.
Corruption is observed if these updates happen before DSC double buffered
disconnection.
[how]
Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered
disconnection and all mpccs are disconnected before reset DSC clock.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Input mode for the DIG FIFO should be programmed as part of stream
encoder setup.
[HOW]
Pre-calculate the pixels per cycle as part of the pixel clock params,
and program as part of stream encoder setup.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
./drivers/gpu/drm/amd/display/dc/inc/hw/transform.h: spl/dc_spl_types.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8884
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When optc uses two pixel per container, each ODM slice width must be an
even number.
[how]
If ODM slice width is odd number increase it by 1.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mode set"
This reverts commit 4d4d3ff16db2 ("drm/amd/display: Keep VBios pixel rate div
setting util next mode set") which causes issue.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
VBios & Driver may have differnet pixel rate div policy.
If the policy is not same and fast boot is enabled,
it would cause the pixel rate is too high
after driver only performs stream blank & unblank.
[how]
We would keep pixel rate div setting by VBios until next mode set.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add miscellaneous changes to enable DCN401 init
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update macros to cover DCN 4.0.1.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove a duplicate definition of an SPL related enum transform.h
Since its used in SPL, it has been moved to its own header.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
