summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
AgeCommit message (Collapse)Author
2025-03-18drm/amd/display: Fix message for support_edp0_on_dp1Yilin Chen
[WHY] The info message was wrong when support_edp0_on_dp1 is enabled [HOW] Use correct info message for support_edp0_on_dp1 Fixes: f6d17270d18a ("drm/amd/display: add a quirk to enable eDP0 on DP1") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add and use new dm_prepare_suspend() callbackMario Limonciello
[Why] The displays currently don't get turned off until after other IP blocks have been suspended. However turning off the displays first gives a very visible response that the system is on it's way down. [How] Turn off displays in a prepare_suspend() callback instead when possible. This will help for suspend and hibernate sequences. The shutdown sequence however will not call prepare() so check whether the state has been already saved to decide what to do. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10Merge tag 'amd-drm-next-6.15-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amdgpu: - Fix spelling typos - RAS updates - VCN 5.0.1 updates - SubVP fixes - DCN 4.0.1 fixes - MSO DPCD fixes - DIO encoder refactor - PCON fixes - Misc cleanups - DMCUB fixes - USB4 DP fixes - DM cleanups - Backlight cleanups and fixes - Support platform backlight curves - Misc code cleanups - SMU 14 fixes - JPEG 4.0.3 reset updates - SR-IOV fixes - SVM fixes - GC 12 DCC fixes - DC DCE 6.x fix - Hiberation fix amdkfd: - Fix possible NULL pointer in queue validation - Remove unnecessary CP domain validation - SDMA queue reset support - Add per process flags radeon: - Fix spelling typos - RS400 hyperZ fix UAPI: - Add KFD per process flags for setting precision Proposed user space: https://github.com/ROCm/ROCR-Runtime/commit/2a64fa5e06e80e0af36df4ce0c76ae52eeec0a9d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307211051.1880472-1-alexander.deucher@amd.com
2025-03-07drm/amd: Keep display off while going into S4Mario Limonciello
When userspace invokes S4 the flow is: 1) amdgpu_pmops_prepare() 2) amdgpu_pmops_freeze() 3) Create hibernation image 4) amdgpu_pmops_thaw() 5) Write out image to disk 6) Turn off system Then on resume amdgpu_pmops_restore() is called. This flow has a problem that because amdgpu_pmops_thaw() is called it will call amdgpu_device_resume() which will resume all of the GPU. This includes turning the display hardware back on and discovering connectors again. This is an unexpected experience for the display to turn back on. Adjust the flow so that during the S4 sequence display hardware is not turned back on. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038 Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add workaround for a panelAurabindo Pillai
Implement w/a for a panel which requires 10s delay after link detect. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add a new dcdebugmask to allow turning off brightness curveMario Limonciello
Upgrading the kernel may cause some systems that were previously not using a firmware specified brightness curve to use one. In the event of problems with this curve (for example an interpolation error) add a new dcdebugmask value that can be used to turn it off. Also add an info message to show that custom brightness curves are currently in use. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-6-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add support for custom brightness curveMario Limonciello
Some systems specify in the firmware a brightness curve that better reflects the characteristics of the panel used. This is done in the form of data points and matching luminance percentage. When converting a userspace requested brightness value use that curve to convert to a firmware intended brightness value. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-5-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Avoid operating on copies of backlight capsMario Limonciello
Making a copy of the backlight caps structure between uses is unnecessary. Refer to pointers to the same structure when using it. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-4-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use drm_err() for handle_hpd_irq_helper()Mario Limonciello
drm_err() will show which device has the error. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guards for handle_hpd_irq_helper()Mario Limonciello
Scoped guards will release the mutex when they go out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free() macro for amdgpu_dm_update_connector_after_detect()Mario Limonciello
By using a _free() macro multiple duplicated snippets of code to free the sink can be dropped. The sink will be released when leaving scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guard for amdgpu_dm_update_connector_after_detect()Mario Limonciello
A scoped guard will release the mutex when it goes out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free(kfree) for dm_gpureset_commit_state()Mario Limonciello
Using a _free(kfree) macro drops the need for a goto statement as it will be freed when it goes out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guard for dm_resume()Mario Limonciello
Scoped guards will release the mutex when they go out of scope. Adjust the code to use these instead. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use drm_err() instead of DRM_ERROR in dm_resume()Mario Limonciello
drm_err() is helpful to show which device had the error. Adjust to using this instead for error messages. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free() macro for amdgpu_dm_commit_zero_streams()Mario Limonciello
All cases except a failure to create a copy of the current context will call dc_state_release() on the copied context. Use a _free() macro to free the context and then adjust the error handling flow to drop the unnecessary use of goto statements. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Catch failures for amdgpu_dm_commit_zero_streams()Mario Limonciello
amdgpu_dm_commit_zero_streams() returns a DC error code that isn't checked. Add an explicit check to this and fail dm_suspend() if it is not DC_OK. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Drop `ret` variable from dm_suspend()Mario Limonciello
The `ret` variable in dm_suspend() doesn't get set and is just used to return 0. Drop the needless declaration. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-26Merge tag 'amd-drm-next-6.15-2025-02-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.15-2025-02-21: amdgpu: - Add OEM i2c support for RGB lights, etc. - Add support for GC 11.5.3 - Add support for GC 11.5.2 - Add support for SDMA 6.1.3 - Add support for NBIO 7.11.2 - Add support for NBIO 7.9.1 - Add support for MMHUB 3.3.2 - Add support for MMHUB 1.8.1 - Add support for SMU 14.0.5 - Add support for SMUIO 13.0.11 - Add support for PSP 14.0.5 - Add support for UMC 12.5.0 - Add support for DCN 3.6.0 - JPEG 4.0.3 updates - Add dynamic workload profile switching for GC 10-12 - support larger vbios sizes - GC 9.5.0 updates - SMU 13.0.12 updates - SMU 13.0.6 updates - IP discovery updates - GC 10 queue reset updates - DCN 4.0.1 updates - UHBR link rate fixes - Aborted suspend fix - Mark gttsize parameter as deprecated - GC 10 cleaner shader updates - PSR-SU fixes - Clean up PM4 headers - Cursor fixes - Enable devcoredump for JPEG - Misc cleanups - Runpm cleanups - MES updates - GC 9 gfxoff fixes - Vbios fetching cleanups - Documentation updates - Update secondary plane handling - DML2 updates - SDMA fixes for MI - Cleaner shader fixes for GC 11/12 - ACA updates - Initial JPEG queue reset support - RAS updates - Initial RAS CPER support - DCN/DCE panic screen handling cleanup - BT2020 fixes - SR-IOV fixes amdkfd: - synchronize pasid values between KGD and KFD - Misc cleanups - Improve GTT/VRAM handling for APUs - Topology updates - Fix user queue validation on GC 7/8 UAPI: - Enable "Broadcast RGB" drm property - Add INFO IOCTL query for virtualization mode Proposed userspace: https://github.com/ROCm/amdsmi/commit/e663bed7d6b3df79f5959e73981749b1f22ec698 From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250221213651.4176031-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-02-25drm/amd/display: ACPI Re-timer ProgrammingRafal Ostrowski
[Why] We must implement an ACPI re-timer programming interface and notify ACPI driver whenever a PHY transition is about to take place. Because some trace lengths on certain platforms are very long, then a re-timer may need to be programmed whenever a PHY transition takes place. The implementation of this re-timer programming interface will notify ACPI driver that PHY transition is taking place and it will trigger the re-timer as needed. First we need to gather retimer information from ACPI interface. Then, in the PRE case, the re-timer interface needs to be called before we call transmitter ENABLE. In the POST case, it has to be called after we call transmitter DISABLE. [How] Implemented ACPI retimer programming interface. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: add a quirk to enable eDP0 on DP1Yilin Chen
[why] some board designs have eDP0 connected to DP1, need a way to enable support_edp0_on_dp1 flag, otherwise edp related features cannot work [how] do a dmi check during dm initialization to identify systems that require support_edp0_on_dp1. Optimize quirk table with callback functions to set quirk entries, retrieve_dmi_info can set quirks according to quirk entries Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: restore edid reading from a given i2c adapterMelissa Wen
When switching to drm_edid, we slightly changed how to get edid by removing the possibility of getting them from dc_link when in aux transaction mode. As MST doesn't initialize the connector with `drm_connector_init_with_ddc()`, restore the original behavior to avoid functional changes. v2: - Fix build warning of unchecked dereference (kernel test bot) CC: Alex Hung <alex.hung@amd.com> CC: Mario Limonciello <mario.limonciello@amd.com> CC: Roman Li <Roman.Li@amd.com> CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amdgpu: update the handle ptr in is_idleSunil Khatri
Update the *handle to amdgpu_ip_block ptr for all functions pointers of is_idle. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Fix BT2020 YCbCr limited/full range inputIlya Bakoulin
[Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Robert Mader <robert.mader@collabora.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Don't treat wb connector as physical in ↵Harry Wentland
create_validate_stream_for_sink Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector. While dereferencing aconnector->base will "work" it's wrong and might lead to unknown bad things. Just... don't. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add DCN36 DM SupportWayne Lin
Add DM handling for DCN36. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Decrease message about seamless boot enabled to debugMario Limonciello
The message in amdgpu_dm about seamless boot is about an ASIC version check and module parameter check. It doesn't actually mean that seamless boot will work. Push this message into debug to avoid being disingenuous about it working until it's been tested. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Support "Broadcast RGB" drm propertyYan Li
[WHY] The source device outputs a full RGB signal, but TV may be set to use limited RGB. The mismatch in color range leads to a degradation in image quality. Display driver should have the ability to switch between the full and limited RGB to match TV's settings. [HOW] Add support of the linux DRM "Broadcast RGB" property, which indicates the Quantization Range (Full vs Limited) used. User space can set this property to be "Automatic", "Full" or "Limited 16:235" to adjust the output color range. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: add support for OEM i2c busAlex Deucher
Expose the OEM i2c bus on boards that support it. This bus is used for OEM specific features like RGB, etc. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: handle OEM i2c buses in i2c functionsAlex Deucher
Allow the creation of an OEM i2c bus and use the proper DC helpers for that case. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop hw_support check in amdgpu_dm_i2c_xfer()Alex Deucher
DC supports SW i2c as well. Drop the check. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop extra parameters to create_i2c()Alex Deucher
link_index can be fetched from the ddc_service; no need for a separate parameter. res is not used. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-28drm/amd/display: restore invalid MSA timing check for freesyncMelissa Wen
This restores the original behavior that gets min/max freq from EDID and only set DP/eDP connector as freesync capable if "sink device is capable of rendering incoming video stream without MSA timing parameters", i.e., `allow_invalid_MSA_timing_params` is true. The condition was mistakenly removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP"). CC: Mario Limonciello <mario.limonciello@amd.com> CC: Alex Hung <alex.hung@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915 Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-24drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changedSrinivasan Shanmugam
The function amdgpu_dm_crtc_mem_type_changed was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that new_plane_state and old_plane_state are valid before dereferencing them. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:11486 amdgpu_dm_crtc_mem_type_changed() error: 'new_plane_state' dereferencing possible ERR_PTR() drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 11475 static bool amdgpu_dm_crtc_mem_type_changed(struct drm_device *dev, 11476 struct drm_atomic_state *state, 11477 struct drm_crtc_state *crtc_state) 11478 { 11479 struct drm_plane *plane; 11480 struct drm_plane_state *new_plane_state, *old_plane_state; 11481 11482 drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { 11483 new_plane_state = drm_atomic_get_plane_state(state, plane); 11484 old_plane_state = drm_atomic_get_plane_state(state, plane); ^^^^^^^^^^^^^^^^^^^^^^^^^^ These functions can fail. 11485 --> 11486 if (old_plane_state->fb && new_plane_state->fb && 11487 get_mem_type(old_plane_state->fb) != get_mem_type(new_plane_state->fb)) 11488 return true; 11489 } 11490 11491 return false; 11492 } Fixes: 4caacd1671b7 ("drm/amd/display: Do not elevate mem_type change to full update") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd: Add debug option to disable subvpAurabindo Pillai
Some monitors flicker when subvp is enabled which maybe related to an uncommon timing they use. To isolate such issues, add a debug option to help isolate this the issue for debugging. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-13Merge tag 'amd-drm-next-6.14-2025-01-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.14-2025-01-10: amdgpu: - Fix max surface handling in DC - clang fixes - DCN 3.5 fixes - DCN 4.0.1 fixes - DC CRC fixes - DML updates - DSC fixes - PSR fixes - DC add some divide by 0 checks - SMU13 updates - SR-IOV fixes - RAS fixes - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates _ Fix RB bitmap setup - Fix doorbell ttm cleanup - Add CEC notifier support - DPIA updates - MST fixes amdkfd: - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110172731.2960668-1-alexander.deucher@amd.com
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: add CEC notifier to amdgpu driverKun Liu
This patch adds the cec_notifier feature to amdgpu driver. The changes will allow amdgpu driver code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-07drm/connector: make mode_valid take a const struct drm_display_modeDmitry Baryshkov
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge take a const struct drm_display_mode argument. Change the mode_valid callback of drm_connector to also take a const argument. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-07drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()Dmitry Baryshkov
Make amdgpu_dm_connector_mode_valid() duplicate the mode during the test rather than modifying the passed mode. This is a preparation to converting the mode_valid() callback of drm_connector to take a const struct drm_display_mode argument. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-2-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-06drm/amd/display: Disable replay and psr while VRR is enabledTom Chung
[Why] Replay and PSR will cause some video corruption while VRR is enabled. [How] 1. Disable the Replay and PSR while VRR is enabled. 2. Change the amdgpu_dm_crtc_vrr_active() parameter to const. Because the function will only read data from dm_crtc_state. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enableTom Chung
[Why] The enum DC_PSR_VERSION_SU_1 of psr_version is 1 and DC_PSR_VERSION_UNSUPPORTED is 0xFFFFFFFF. The original code may has chance trigger the amdgpu_dm_psr_enable() while psr version is set to DC_PSR_VERSION_UNSUPPORTED. [How] Modify the condition to psr->psr_version == DC_PSR_VERSION_SU_1 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Adjust dm to use supported interfaces for setting multiple ↵Wayne Lin
crc windows [Why & How] We actually have the capability to calculate independent CRC for 2 crc window at the same time. Extend dm with the capability by having array to configure/maintain multiple crc windows. Add the flexibility but use 1st CRC instance only for now. Can change to use the 2nd CRC instance if needed. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-19drm/amd/display: fix divide error in DM plane scale calcsMelissa Wen
dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Co-developed-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-19drm/amd/display: Remove unnecessary amdgpu_irq_get/putAlex Hung
[WHY & HOW] commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank, and amdgpu_irq_get/put do not need to be called here. Part of that patch got lost somehow, so fix it up. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-20Merge tag 'drm-misc-next-2024-12-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: Cross-subsystem Changes: Core Changes: - connector: Add a mutex to protect ELD access, Add a helper to create a connector in two steps Driver Changes: - amdxdna: Add RyzenAI-npu6 Support, various improvements - rcar-du: Add r8a779h0 Support - rockchip: various improvements - zynqmp: Add DP audio support - bridges: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - panels: - new panels: Tianma TM070JDHG34-00, Multi-Inno Technology MI1010Z1T-1CP11 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219-truthful-demonic-hound-598f63@houat