| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
|
|
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place:
- vdpa/octeon support for multiple interrupts
- virtio-pci support for error recovery
- vp_vdpa support for notification with data
- vhost/net fix to set num_buffers for spec compliance
- virtio-mem now works with kdump on s390
And small cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (23 commits)
virtio_blk: Add support for transport error recovery
virtio_pci: Add support for PCIe Function Level Reset
vhost/net: Set num_buffers for virtio 1.0
vdpa/octeon_ep: read vendor-specific PCI capability
virtio-pci: define type and header for PCI vendor data
vdpa/octeon_ep: handle device config change events
vdpa/octeon_ep: enable support for multiple interrupts per device
vdpa: solidrun: Replace deprecated PCI functions
s390/kdump: virtio-mem kdump support (CONFIG_PROC_VMCORE_DEVICE_RAM)
virtio-mem: support CONFIG_PROC_VMCORE_DEVICE_RAM
virtio-mem: remember usable region size
virtio-mem: mark device ready before registering callbacks in kdump mode
fs/proc/vmcore: introduce PROC_VMCORE_DEVICE_RAM to detect device RAM ranges in 2nd kernel
fs/proc/vmcore: factor out freeing a list of vmcore ranges
fs/proc/vmcore: factor out allocating a vmcore range and adding it to a list
fs/proc/vmcore: move vmcore definitions out of kcore.h
fs/proc/vmcore: prefix all pr_* with "vmcore:"
fs/proc/vmcore: disallow vmcore modifications while the vmcore is open
fs/proc/vmcore: replace vmcoredd_mutex by vmcore_mutex
fs/proc/vmcore: convert vmcore_cb_lock into vmcore_mutex
...
|
|
Let's add support for including virtio-mem device RAM in the crash dump,
setting NEED_PROC_VMCORE_DEVICE_RAM, and implementing
elfcorehdr_fill_device_ram_ptload_elf64().
To avoid code duplication, factor out the code to fill a PT_LOAD entry.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-13-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce CC_HAS_ASM_AOR_FORMAT_FLAGS Kconfig option. Use this option for
inline assemblies where the A, O, or R format flags are used.
Those flags are not available for Clang versions before 19.1.0.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Config options which can be used to check for compiler bugs and features
have the compiler independent CC prefix in order to avoid duplicating and
having to check config options for multiple compilers. Therefore rename the
config option accordingly.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
|
|
Add ftrace_graph_func() which is required for fprobe to access registers.
This also eliminates the need for calling prepare_ftrace_return() from
ftrace_caller().
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173519002875.391279.7060964632119674159.stgit@devnote2
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Change the fprobe exit handler to use ftrace_regs structure instead of
pt_regs. This also introduce HAVE_FTRACE_REGS_HAVING_PT_REGS which
means the ftrace_regs is including the pt_regs so that ftrace_regs
can provide pt_regs without memory allocation.
Fprobe introduces a new dependency with that.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Matt Bobrowski <mattbobrowski@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/173518995092.391279.6765116450352977627.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Use ftrace_regs instead of fgraph_ret_regs for tracing return value
on function_graph tracer because of simplifying the callback interface.
The CONFIG_HAVE_FUNCTION_GRAPH_RETVAL is also replaced by
CONFIG_HAVE_FUNCTION_GRAPH_FREGS.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173518991508.391279.16635322774382197642.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There is no point in supporting !VMAP_STACK kernel builds. VMAP_STACK has
proven to work since many years. Also, since KASAN_VMALLOC is supported,
kernels built with !VMAP_STACK are completely untested.
Therefore select VMAP_STACK unconditionally and remove all config options
and code required for !VMAP_STACK builds.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Reduce the number of to be considered config options and select
KASAN_VMALLOC if KASAN is enabled.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move the s390 CRC32 assembly code into the lib directory and wire it up
to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/s390/crypto/crc32-vx.c to
arch/s390/lib/crc32-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add swap entry for hugetlbfs support
- Add PTE_MARKER support for hugetlbs mappings; this fixes a regression
(possible page fault loop) which was introduced when support for
UFFDIO_POISON for hugetlbfs was added
- Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support
- Mark IRQ entries in entry code, so that stack tracers can filter out
the non-IRQ parts of stack traces. This fixes stack depot capacity
limit warnings, since without filtering the number of unique stack
traces is huge
- In PCI code fix leak of struct zpci_dev object, and fix potential
double remove of hotplug slot
- Fix pagefault_disable() / pagefault_enable() unbalance in
arch_stack_user_walk_common()
- A couple of inline assembly optimizations, more cmpxchg() to
try_cmpxchg() conversions, and removal of usages of xchg() and
cmpxchg() on one and two byte memory areas
- Various other small improvements and cleanups
* tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits)
Revert "s390/mm: Allow large pages for KASAN shadow mapping"
s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8()
s390/spinlock: Use R constraint for arch_load_niai4()
s390/spinlock: Generate shorter code for arch_spin_unlock()
s390/spinlock: Remove condition code clobber from arch_spin_unlock()
s390/spinlock: Use symbolic names in inline assemblies
s390: Support PREEMPT_DYNAMIC
s390/pci: Fix potential double remove of hotplug slot
s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails
s390/mm/hugetlbfs: Add missing includes
s390/mm: Add PTE_MARKER support for hugetlbfs mappings
s390/mm: Introduce region-third and segment table swap entries
s390/mm: Introduce region-third and segment table entry present bits
s390/mm: Rearrange region-third and segment table entry SW bits
KVM: s390: Increase size of union sca_utility to four bytes
KVM: s390: Remove one byte cmpxchg() usage
KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops
s390/ap: Replace xchg() with WRITE_ONCE()
s390/mm: Allow large pages for KASAN shadow mapping
s390: Add ARCH_HAS_PREEMPT_LAZY support
...
|
|
Select HAVE_PREEMPT_DYNAMIC_KEY and add the pieces which are required to
support PREEMPT_DYNAMIC.
See commit 99cf983cc8bc ("sched/preempt: Add PREEMPT_DYNAMIC using static
keys") and commit 1b2d3451ee50 ("arm64: Support PREEMPT_DYNAMIC") for more
details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Just add the required TIF bit for ARCH_HAS_PREEMPT_LAZY support.
Shuffle TIF bits to get TIF_NEED_RESCHED_LAZY next to TIF_NEED_RESCHED.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add firmware sysfs interface which allows user space to retrieve the
dump area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the
complete associated Channel-Measurements Characteristics Block
available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to
KVM code. This is the first step to make s390 KVM page fault handling
similar to other architectures. With this first step the main fault
handler does not have any special handling anymore, and therefore
convert it to support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations:
- Provide a cmpxchg inline assembly which makes use of this, and
provide all variants of arch_try_cmpxchg() so that the compiler
can generate slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros),
and convert all inline assemblies to make use of them, so that
depending on compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the
Query Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so
that the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID
per port. Additionally improve the overall robustness and usability
of the multifunction support
- Various other small improvements, fixes, and cleanups
* tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits)
s390/cio/ioasm: Convert to use flag output macros
s390/cio/qdio: Convert to use flag output macros
s390/sclp: Convert to use flag output macros
s390/dasd: Convert to use flag output macros
s390/boot/physmem: Convert to use flag output macros
s390/pci: Convert to use flag output macros
s390/kvm: Convert to use flag output macros
s390/extmem: Convert to use flag output macros
s390/string: Convert to use flag output macros
s390/diag: Convert to use flag output macros
s390/irq: Convert to use flag output macros
s390/smp: Convert to use flag output macros
s390/uv: Convert to use flag output macros
s390/pai: Convert to use flag output macros
s390/mm: Convert to use flag output macros
s390/cpu_mf: Convert to use flag output macros
s390/cpcmd: Convert to use flag output macros
s390/topology: Convert to use flag output macros
s390/time: Convert to use flag output macros
s390/pageattr: Convert to use flag output macros
...
|
|
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since gcc supports flag out operands for inline assemblies there is always
the question when this feature should be used and if it is worth all the
ifdefs that come with that.
In order to avoid that provide similar macros like x86 which can be used
for all inline assemblies which extract the condition code. Depending on
compiler features the generated code will either always contain an ipm+srl
instruction pair, which extracts the condition code, or alternatively let
the compiler handle this completely.
Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The struct arch_vdso_data is only about vdso time data. So rename it to
arch_vdso_time_data to make it obvious.
Non time-related data will be migrated out of these structs soon.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-28-b64f0842d512@linutronix.de
|
|
With the gmap code gone s390 can be easily converted to
LOCK_MM_AND_FIND_VMA like it has been done for most other
architectures.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241022120601.167009-12-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available
- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption
- Rework crypto code pkey module and split it into separate,
independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
to load only when the relevant hardware is available
- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support
- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters
- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements
- Add support for SHA3 performance enhancements introduced with MSA 12
- Add support for the query authentication information feature of MSA
13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form
- Update kernel disassembler instructions
- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility
- Add missing warning handling and relocated lowcore support to the
early program check handler
- Optimize ftrace_return_address() and avoid calling unwinder
- Make modules use kernel ftrace trampolines
- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller
- Dump register contents and call trace for early crashes to the
console
- Generate ptdump address marker array dynamically
- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon
- Fix deadlock caused by recursive lock of the AP bus scan mutex
- Unify sync and async register save areas in entry code
- Cleanup debug prints in crypto code
- Various cleanup and sanitizing patches for the decompressor
- Various small ftrace cleanups
* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
s390/crypto: Display Query and Query Authentication Information in sysfs
s390/crypto: Add Support for Query Authentication Information
s390/crypto: Rework RRE and RRF CPACF inline functions
s390/crypto: Add KDSA CPACF Instruction
s390/disassembler: Remove duplicate instruction format RSY_RDRU
s390/boot: Move boot_printk() code to own file
s390/boot: Use boot_printk() instead of sclp_early_printk()
s390/boot: Rename decompressor_printk() to boot_printk()
s390/boot: Compile all files with the same march flag
s390: Use MARCH_HAS_*_FEATURES defines
s390: Provide MARCH_HAS_*_FEATURES defines
s390/facility: Disable compile time optimization for decompressor code
s390/boot: Increase minimum architecture to z10
s390/als: Remove obsolete comment
s390/sha3: Fix SHA3 selftests failures
s390/pkey: Add AES xts and HMAC clear key token support
s390/cpacf: Add MSA 10 and 11 new PCKMO functions
s390/mm: Add cond_resched() to cmm_alloc/free_pages()
s390/pai_ext: Update PAI extension 1 counters
s390/pai_crypto: Add support for MSA 10 and 11 pai counters
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
Provide the s390 specific vdso getrandom() architecture backend.
_vdso_rng_data required data is placed within the _vdso_data vvar page,
by using a hardcoded offset larger than vdso_data.
As required the chacha20 implementation does not write to the stack.
The implementation follows more or less the arm64 implementations and
makes use of vector instructions. It has a fallback to the getrandom()
system call for machines where the vector facility is not installed.
The check if the vector facility is installed, as well as an
optimization for machines with the vector-enhancements facility 2, is
implemented with alternatives, avoiding runtime checks.
Note that __kernel_getrandom() is implemented without the vdso user
wrapper which would setup a stack frame for odd cases (aka very old
glibc variants) where the caller has not done that. All callers of
__kernel_getrandom() are required to setup a stack frame, like the C ABI
requires it.
The vdso testcases vdso_test_getrandom and vdso_test_chacha pass.
Benchmark on a z16:
$ ./vdso_test_getrandom bench-single
vdso: 25000000 times in 0.493703559 seconds
syscall: 25000000 times in 6.584025337 seconds
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
|
|
Expose hiperdispatch controls via sysctl. The user can now toggle
hiperdispatch via assigning 0 or 1 to s390.hiperdispatch attribute.
When hiperdipatch is toggled on, it tries to adjust CPU capacities,
while system is in vertical polarization to gain performance benefits
from different CPU polarizations. Disabling hiperdispatch reverts the
CPU capacities to their default (HIGH_CAPACITY) and stops the dynamic
adjustments.
Introduce a kconfig option HIPERDISPATCH_ON which allows users to
use hiperdispatch by default on vertical polarization. Using the
sysctl attribute s390.hiperdispatch would overwrite this behavior.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
By default, all systems on s390 start in horizontal cpu polarization.
Selecting the new config option SCHED_TOPOLOGY_VERTICAL allows to build
a kernel that switches to vertical polarization during boot.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Since commit ba05b39d54ee ("s390/expoline: Make modules use kernel
expolines"), there is no longer any reason not to use
CONFIG_EXPOLINE_EXTERN when supported by the compiler.
On the positive side:
- there is only a single set of expolines generated and used by both the
kernel code and modules,
- it eliminates expolines "comdat" sections, which can confuse tools
like kpatch.
Always enable EXPOLINE_EXTERN if supported by the compiler.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
SIE instruction performs faster when the virtual address of
SIE block matches the physical one. Pin the identity mapping
base to zero for the benefit of SIE and other instructions
that have similar performance impact. Still, randomize the
base when DEBUG_VM kernel configuration option is enabled.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Removing the CONFIG_PROTECTED_VIRTUALIZATION_GUEST ifdefs and config
option as well as CONFIG_KVM ifdefs in uv files.
Having this configurable has been more of a pain than a help.
It's time to remove the ifdefs and the config option.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Instead of setting up non-boot CPUs early in architecture code,
only setup the cpu present mask and let the generic code handle
cpu bringup.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Now that everything else is in place, enable KMSAN in Kconfig.
Link: https://lkml.kernel.org/r/20240621113706.315500-39-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make use of the popcnt instruction to provide optimized __arch_hweight*()
implementations. The generated code is shorter and avoids rather expensive
functions calls.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
When the kernel is built with CONFIG_PIE_BUILD option enabled it
uses dynamic symbols, for which the linker does not allow more
than 64K number of entries. This can break features like kpatch.
Hence, whenever possible the kernel is built with CONFIG_PIE_BUILD
option disabled. For that support of unaligned symbols generated by
linker scripts in the compiler is necessary.
However, older compilers might lack such support. In that case the
build process resorts to CONFIG_PIE_BUILD option-enabled build.
Compile object files with -fPIC option and then link the kernel
binary with -no-pie linker option.
As result, the dynamic symbols are not generated and not only kpatch
feature succeeds, but also the whole CONFIG_PIE_BUILD option-enabled
code could be dropped.
[ agordeev: Reworded the commit message ]
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, kernel modules contain their own set of expoline thunks. In
the case of EXPOLINE_EXTERN, this involves postlinking of precompiled
expoline.o. expoline.o is also necessary for out-of-source tree module
builds.
Now that the kernel modules area is less than 4 GB away from
kernel expoline thunks, make modules use kernel expolines. Also make
EXPOLINE_EXTERN the default if the compiler supports it. This simplifies
build and aligns with the approach adopted by other architectures.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Since kernel virtual and physical address spaces are
uncoupled the kernel is mapped at the top of the virtual
address space in case KASLR is disabled.
That does not pose any issue with regard to the kernel
booting and operation, but makes it difficult to use a
generated vmlinux with some debugging tools (e.g. gdb),
because the exact location of the kernel image in virtual
memory is unknown. Make that location known and introduce
CONFIG_KERNEL_IMAGE_BASE configuration option.
A custom CONFIG_KERNEL_IMAGE_BASE value that would break
the virtual memory layout leads to a build error.
The kernel image size is defined by KERNEL_IMAGE_SIZE
macro and set to 512 MB, by analogy with x86.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.
Currently __kaslr_offset is the kernel offset in both
physical memory on boot and in virtual memory after DAT
mode is enabled.
Uncouple these offsets and rename the physical address
space variant to __kaslr_offset_phys while keep the name
__kaslr_offset for the offset in virtual address space.
Do not use __kaslr_offset_phys after DAT mode is enabled
just yet, but still make it a persistent boot variable
for later use.
Use __kaslr_offset and __kaslr_offset_phys offsets in
proper contexts and alter handle_relocs() function to
distinguish between the two.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The configuration option ZCRYPT_DEBUG is used only in ap queue code,
so rename it to AP_DEBUG. It also no longer depends on ZCRYPT but on
AP. While at it, also update the help text.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
There is no hard requirement to have the ap bus statically in the
kernel, so add an option to compile it as module.
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390
specific drivers and code to make it easier to find virtual vs
physical address usage bugs.
Right now virtual and physical addresses are identical for s390,
except for module, vmalloc, and similar areas. This will be changed,
hopefully with the next merge window, so that e.g. the kernel image
and modules will be located close to each other, allowing for direct
branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the
concept that virtual and physical addresses are the same, that new
bugs got added to code which was already fixed. In order to avoid
that even more code gets merged which adds such bugs add and use new
bitwise types, so that sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area
in the entry code, the program check handler may incorrectly execute
cleanup code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/entry: compare gmap asce to determine guest/host fault
s390/entry: remove OUTSIDE macro
s390/entry: add CIF_SIE flag and remove sie64a() address check
s390/cio: use while (i--) pattern to clean up
s390/raw3270: make class3270 constant
s390/raw3270: improve raw3270_init() readability
s390/tape: make tape_class constant
s390/vmlogrdr: make vmlogrdr_class constant
s390/vmur: make vmur_class constant
s390/zcrypt: make zcrypt_class constant
s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
s390/vfio_ccw_cp: use new address translation helpers
s390/iucv: use new address translation helpers
s390/ctcm: use new address translation helpers
s390/lcs: use new address translation helpers
s390/qeth: use new address translation helpers
s390/zfcp: use new address translation helpers
s390/tape: fix virtual vs physical address confusion
s390/3270: use new address translation helpers
s390/3215: use new address translation helpers
...
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
Provide a very simple ARCH_HAS_DEBUG_VIRTUAL implementation.
For now errors are only reported for the following cases:
- Trying to translate a vmalloc or module address to a physical address
- Translating a supposed to be ZONE_DMA virtual address into a physical
address, and the resulting physical address is larger than two GiB
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
