summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/bcm47094.dtsi
AgeCommit message (Collapse)Author
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2021-05-10ARM: dts: BCM5301X: Fix pinmux subnodes namesRafał Miłecki
This matches pinmux-node.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20ARM: dts: BCM5301X: Add a default compatible for switch nodeFlorian Fainelli
Provide a default compatible string which is based on the 53011 SRAB compatible by default. The 4709 and 47094 default to the 53012 SRAB compatible. This allows us to have sane defaults and silences the following warnings: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm5301x-srab'] is too short 'brcm,bcm5325' was expected 'brcm,bcm53115' was expected 'brcm,bcm53125' was expected 'brcm,bcm53128' was expected 'brcm,bcm5365' was expected 'brcm,bcm5395' was expected 'brcm,bcm5389' was expected 'brcm,bcm5397' was expected 'brcm,bcm5398' was expected 'brcm,bcm11360-srab' was expected 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', 'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', 'brcm,bcm53019-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', 'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', 'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', 'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', 'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', 'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-11ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709xVivek Unune
BCM47094 version of pinmux uses different compatible and supports MDIO pinmux pins. Hence, use the correct compatible string and defines the MDIO pins group. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-05ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MITRafał Miłecki
This matches licensing used by other BCM5301X files and is preferred as: 1) GPL 2.0+ makes it clearly compatible with Linux kernel 2) MIT is also permissive but preferred over ISC This file has been developed by me & once modified by Vivek. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-07-09ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driverVivek Unune
Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which requires register range "ccb-mii" <0x18003000 0x1000>. This range overlaps with MDIO cmd and param registers (<0x18003000 0x8>). Essentially, the platform driver partly acts like a MDIO bus driver, hence to use of this register range. In some Northstar devices like Linksys EA9500, secondary switch is connected via external MDIO. The only way to access and configure the external switch is via MDIO bus. When we enable the MDIO bus in it's current state, the MDIO bus and any child buses fail to register because of the register range overlap. On Northstar, the USB 3.0 PHY is connected at address 0x10 on the internal MDIO bus. This change moves the usb3_phy node and makes it a child node of internal MDIO bus. Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer") the same USB 3.0 platform driver can now act as USB 3.0 PHY MDIO driver. Tested on Linksys Panamera (EA9500) Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-18ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012Rafał Miłecki
Every device tested so far got UART0 (at 0x18000300) working as serial console. It's most likely part of reference design and all vendors use it that way. It seems to be easier to enable it by default and just disable it if we ever see a device with different hardware design. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jon Mason <jon.mason@broadcom.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-10-19ARM: BCM5301X: Specify USB 3.0 PHY in DTRafał Miłecki
Driver for Northstar USB 3.0 PHY has been recently added under the name phy-bcm-ns-usb3. Add binding for it into the DT files. The only slightly tricky part is BCM47094 which uses different PHY version and requires different compatible value. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-10-19ARM: BCM5301X: Add separated DTS include file for BCM47094Rafał Miłecki
Use it to store BCM47094 specific properties/values and avoid repeating them in device DTS files. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>