diff options
Diffstat (limited to 'tools/testing/selftests/bpf/test_lwt_ip_encap.sh')
| -rwxr-xr-x | tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh deleted file mode 100755 index 1e565f47aca9..000000000000 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ /dev/null @@ -1,476 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Setup/topology: -# -# NS1 NS2 NS3 -# veth1 <---> veth2 veth3 <---> veth4 (the top route) -# veth5 <---> veth6 veth7 <---> veth8 (the bottom route) -# -# each vethN gets IPv[4|6]_N address -# -# IPv*_SRC = IPv*_1 -# IPv*_DST = IPv*_4 -# -# all tests test pings from IPv*_SRC to IPv*_DST -# -# by default, routes are configured to allow packets to go -# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) -# -# a GRE device is installed in NS3 with IPv*_GRE, and -# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 -# (the bottom route) -# -# Tests: -# -# 1. routes NS2->IPv*_DST are brought down, so the only way a ping -# from IP*_SRC to IP*_DST can work is via IPv*_GRE -# -# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth1:egress]->GRE:decap->DST -# ping replies go DST->SRC directly -# -# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST -# ping replies go DST->SRC directly - -BPF_FILE="test_lwt_ip_encap.bpf.o" -if [[ $EUID -ne 0 ]]; then - echo "This script must be run as root" - echo "FAIL" - exit 1 -fi - -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" - -readonly IPv4_1="172.16.1.100" -readonly IPv4_2="172.16.2.100" -readonly IPv4_3="172.16.3.100" -readonly IPv4_4="172.16.4.100" -readonly IPv4_5="172.16.5.100" -readonly IPv4_6="172.16.6.100" -readonly IPv4_7="172.16.7.100" -readonly IPv4_8="172.16.8.100" -readonly IPv4_GRE="172.16.16.100" - -readonly IPv4_SRC=$IPv4_1 -readonly IPv4_DST=$IPv4_4 - -readonly IPv6_1="fb01::1" -readonly IPv6_2="fb02::1" -readonly IPv6_3="fb03::1" -readonly IPv6_4="fb04::1" -readonly IPv6_5="fb05::1" -readonly IPv6_6="fb06::1" -readonly IPv6_7="fb07::1" -readonly IPv6_8="fb08::1" -readonly IPv6_GRE="fb10::1" - -readonly IPv6_SRC=$IPv6_1 -readonly IPv6_DST=$IPv6_4 - -TEST_STATUS=0 -TESTS_SUCCEEDED=0 -TESTS_FAILED=0 - -TMPFILE="" - -process_test_results() -{ - if [[ "${TEST_STATUS}" -eq 0 ]] ; then - echo "PASS" - TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) - else - echo "FAIL" - TESTS_FAILED=$((TESTS_FAILED+1)) - fi -} - -print_test_summary_and_exit() -{ - echo "passed tests: ${TESTS_SUCCEEDED}" - echo "failed tests: ${TESTS_FAILED}" - if [ "${TESTS_FAILED}" -eq "0" ] ; then - exit 0 - else - exit 1 - fi -} - -setup() -{ - set -e # exit on error - TEST_STATUS=0 - - # create devices and namespaces - ip netns add "${NS1}" - ip netns add "${NS2}" - ip netns add "${NS3}" - - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 - - # disable IPv6 DAD because it sometimes takes too long and fails tests - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0 - - ip link add veth1 type veth peer name veth2 - ip link add veth3 type veth peer name veth4 - ip link add veth5 type veth peer name veth6 - ip link add veth7 type veth peer name veth8 - - ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 - - ip link set veth1 netns ${NS1} - ip link set veth2 netns ${NS2} - ip link set veth3 netns ${NS2} - ip link set veth4 netns ${NS3} - ip link set veth5 netns ${NS1} - ip link set veth6 netns ${NS2} - ip link set veth7 netns ${NS2} - ip link set veth8 netns ${NS3} - - if [ ! -z "${VRF}" ] ; then - ip -netns ${NS1} link add red type vrf table 1001 - ip -netns ${NS1} link set red up - ip -netns ${NS1} route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} link set veth1 vrf red - ip -netns ${NS1} link set veth5 vrf red - - ip -netns ${NS2} link add red type vrf table 1001 - ip -netns ${NS2} link set red up - ip -netns ${NS2} route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} link set veth2 vrf red - ip -netns ${NS2} link set veth3 vrf red - ip -netns ${NS2} link set veth6 vrf red - ip -netns ${NS2} link set veth7 vrf red - fi - - # configure addesses: the top route (1-2-3-4) - ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 - ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 - ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 - ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 - ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 - ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 - ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 - ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 - - # configure addresses: the bottom route (5-6-7-8) - ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 - ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 - ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 - ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 - ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 - ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 - ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 - ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 - - ip -netns ${NS1} link set dev veth1 up - ip -netns ${NS2} link set dev veth2 up - ip -netns ${NS2} link set dev veth3 up - ip -netns ${NS3} link set dev veth4 up - ip -netns ${NS1} link set dev veth5 up - ip -netns ${NS2} link set dev veth6 up - ip -netns ${NS2} link set dev veth7 up - ip -netns ${NS3} link set dev veth8 up - - # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; - # the bottom route to specific bottom addresses - - # NS1 - # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default - # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} - - # NS2 - # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} - # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} - - # NS3 - # top route - ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 - ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 - ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} - ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} - # bottom route - ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 - ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 - ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} - ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} - - # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 - ip -netns ${NS3} link set gre_dev up - ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} - - - # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 - ip -netns ${NS3} link set gre6_dev up - ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) - - sleep 1 # reduce flakiness - set +e -} - -cleanup() -{ - if [ -f ${TMPFILE} ] ; then - rm ${TMPFILE} - fi - - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null -} - -trap cleanup EXIT - -remove_routes_to_gredev() -{ - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} -} - -add_unreachable_routes_to_gredev() -{ - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} -} - -test_ping() -{ - local readonly PROTO=$1 - local readonly EXPECTED=$2 - local RET=0 - - if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null - RET=$? - elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null - RET=$? - else - echo " test_ping: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - - if [ "0" != "${RET}" ]; then - RET=1 - fi - - if [ "${EXPECTED}" != "${RET}" ] ; then - echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" - TEST_STATUS=1 - fi -} - -test_gso() -{ - local readonly PROTO=$1 - local readonly PKT_SZ=5000 - local IP_DST="" - : > ${TMPFILE} # trim the capture file - - # check that nc is present - command -v nc >/dev/null 2>&1 || \ - { echo >&2 "nc is not available: skipping TSO tests"; return; } - - # listen on port 9000, capture TCP into $TMPFILE - if [ "${PROTO}" == "IPv4" ] ; then - IP_DST=${IPv4_DST} - ip netns exec ${NS3} bash -c \ - "nc -4 -l -p 9000 > ${TMPFILE} &" - elif [ "${PROTO}" == "IPv6" ] ; then - IP_DST=${IPv6_DST} - ip netns exec ${NS3} bash -c \ - "nc -6 -l -p 9000 > ${TMPFILE} &" - RET=$? - else - echo " test_gso: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - sleep 1 # let nc start listening - - # send a packet larger than MTU - ip netns exec ${NS1} bash -c \ - "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" - sleep 2 # let the packet get delivered - - # verify we received all expected bytes - SZ=$(stat -c %s ${TMPFILE}) - if [ "$SZ" != "$PKT_SZ" ] ; then - echo " test_gso failed: ${PROTO}" - TEST_STATUS=1 - fi -} - -test_egress() -{ - local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test ${VRF}" - setup - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - else - echo " unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # skip GSO tests with VRF: VRF routing needs properly assigned - # source IP/device, which is easy to do with ping and hard with dd/nc. - if [ -z "${VRF}" ] ; then - test_gso IPv4 - test_gso IPv6 - fi - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -test_ingress() -{ - local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test ${VRF}" - setup - - # need to wait a bit for IPv6 to autoconf, otherwise - # ping6 sometimes fails with "unable to bind to address" - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - else - echo "FAIL: unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -VRF="" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -VRF="vrf red" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -print_test_summary_and_exit |