diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 776 |
1 files changed, 734 insertions, 42 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f6c1b181c886..3d55bf4be36f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2026 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -906,8 +906,9 @@ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP * (or GO) interface (i.e. hostapd) to ask for unexpected frames to * implement sending deauth to stations that send unexpected class 3 - * frames. Also used as the event sent by the kernel when such a frame - * is received. + * frames. For NAN_DATA interfaces, this is used to report frames from + * unknown peers (A2 not assigned to any active NDP). + * Also used as the event sent by the kernel when such a frame is received. * For the event, the %NL80211_ATTR_MAC attribute carries the TA and * other attributes like the interface index are present. * If used as the command it must have an interface index and you can @@ -1085,8 +1086,9 @@ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is * omitted or set to 0, it means don't-care and the device will - * decide what to use. After this command NAN functions can be - * added. + * decide what to use. Additional cluster configuration may be + * optionally provided with %NL80211_ATTR_NAN_CONFIG. + * After this command NAN functions can be added. * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by * its %NL80211_ATTR_WDEV interface. * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined @@ -1115,6 +1117,10 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). + * Additional parameters may be provided with + * %NL80211_ATTR_NAN_CONFIG. User space should provide all previously + * configured nested attributes under %NL80211_ATTR_NAN_CONFIG, even if + * only a subset was changed. * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. @@ -1330,12 +1336,85 @@ * TID to Link mapping for downlink/uplink traffic. * * @NL80211_CMD_ASSOC_MLO_RECONF: For a non-AP MLD station, request to - * add/remove links to/from the association. + * add/remove links to/from the association. To indicate link + * reconfiguration request results from the driver, this command is also + * used as an event to notify userspace about the added links information. + * For notifying the removed links information, the existing + * %NL80211_CMD_LINKS_REMOVED command is used. This command is also used to + * notify userspace about newly added links for the current connection in + * case of AP-initiated link recommendation requests, received via + * a BTM (BSS Transition Management) request or a link reconfig notify + * frame, where the driver handles the link recommendation offload. * * @NL80211_CMD_EPCS_CFG: EPCS configuration for a station. Used by userland to * control EPCS configuration. Used to notify userland on the current state * of EPCS. * + * @NL80211_CMD_NAN_NEXT_DW_NOTIFICATION: This command is used to notify + * user space about the next NAN Discovery Window (DW). User space may use + * it to prepare frames to be sent in the next DW. + * %NL80211_ATTR_WIPHY_FREQ is used to indicate the frequency of the next + * DW. SDF transmission should be requested with %NL80211_CMD_FRAME and + * the device/driver shall take care of the actual transmission timing. + * This notification is only sent to the NAN interface owning socket + * (see %NL80211_ATTR_SOCKET_OWNER flag). + * @NL80211_CMD_NAN_CLUSTER_JOINED: This command is used to notify + * user space that the NAN new cluster has been joined. The cluster ID is + * indicated by %NL80211_ATTR_MAC. + * + * @NL80211_CMD_INCUMBENT_SIGNAL_DETECT: Once any incumbent signal is detected + * on the operating channel in 6 GHz band, userspace is notified with the + * signal interference bitmap using + * %NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP. The current channel + * definition is also sent. + * + * @NL80211_CMD_NAN_SET_LOCAL_SCHED: Set the local NAN schedule. NAN must be + * operational (%NL80211_CMD_START_NAN was executed). Must contain + * %NL80211_ATTR_NAN_TIME_SLOTS and %NL80211_ATTR_NAN_AVAIL_BLOB, but + * %NL80211_ATTR_NAN_CHANNEL is optional (for example in case of a channel + * removal, that channel won't be provided). + * If %NL80211_ATTR_NAN_SCHED_DEFERRED is set, the command is a request + * from the device to perform an announced schedule update. See + * %NL80211_ATTR_NAN_SCHED_DEFERRED for more details. + * If not set, the schedule should be applied immediately. + * @NL80211_CMD_NAN_SCHED_UPDATE_DONE: Event sent to user space to notify that + * a deferred local NAN schedule update (requested with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED and %NL80211_ATTR_NAN_SCHED_DEFERRED) + * has been completed. The presence of %NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS + * indicates that the update was successful. + * @NL80211_CMD_NAN_SET_PEER_SCHED: Set the peer NAN schedule. NAN + * must be operational (%NL80211_CMD_START_NAN was executed). + * Required attributes: %NL80211_ATTR_MAC (peer NMI address) and + * %NL80211_ATTR_NAN_COMMITTED_DW. + * Optionally, the full schedule can be provided by including all of: + * %NL80211_ATTR_NAN_SEQ_ID, %NL80211_ATTR_NAN_CHANNEL (one or more), and + * %NL80211_ATTR_NAN_PEER_MAPS (see &enum nl80211_nan_peer_map_attrs). + * If any of these three optional attributes is provided, all three must + * be provided. + * Each peer channel must be compatible with at least one local channel + * set by %NL80211_CMD_SET_LOCAL_NAN_SCHED. Different maps must not + * contain compatible channels. + * For single-radio devices (n_radio <= 1), different maps must not + * schedule the same time slot, as the device cannot operate on multiple + * channels simultaneously. + * When updating an existing peer schedule, the full new schedule must be + * provided - partial updates are not supported. The new schedule will + * completely replace the previous one. + * The peer schedule is automatically removed when the NMI station is + * removed. + * @NL80211_CMD_NAN_ULW_UPDATE: Notification from the driver to user space + * with the updated ULW blob of the device. User space can use this blob + * to attach to frames sent to peers. This notification contains + * %NL80211_ATTR_NAN_ULW with the ULW blob. + * @NL80211_CMD_NAN_CHANNEL_EVAC: Notification to indicate that a NAN + * channel has been evacuated due to resource conflicts with other + * interfaces. This can happen when another interface sharing the channel + * resource with NAN needs to move to a different channel (e.g., channel + * switch or link switch on a BSS interface). + * The notification contains %NL80211_ATTR_NAN_CHANNEL attribute + * identifying the evacuated channel. + * User space may reconfigure the local schedule in response to this + * notification. * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1596,6 +1675,21 @@ enum nl80211_commands { NL80211_CMD_ASSOC_MLO_RECONF, NL80211_CMD_EPCS_CFG, + NL80211_CMD_NAN_NEXT_DW_NOTIFICATION, + NL80211_CMD_NAN_CLUSTER_JOINED, + + NL80211_CMD_INCUMBENT_SIGNAL_DETECT, + + NL80211_CMD_NAN_SET_LOCAL_SCHED, + + NL80211_CMD_NAN_SCHED_UPDATE_DONE, + + NL80211_CMD_NAN_SET_PEER_SCHED, + + NL80211_CMD_NAN_ULW_UPDATE, + + NL80211_CMD_NAN_CHANNEL_EVAC, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1935,8 +2029,9 @@ enum nl80211_commands { * The driver must also specify support for this with the extended * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, * NL80211_EXT_FEATURE_BEACON_RATE_HT, - * NL80211_EXT_FEATURE_BEACON_RATE_VHT and - * NL80211_EXT_FEATURE_BEACON_RATE_HE. + * NL80211_EXT_FEATURE_BEACON_RATE_VHT, + * NL80211_EXT_FEATURE_BEACON_RATE_HE and + * NL80211_EXT_FEATURE_BEACON_RATE_EHT. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -2275,7 +2370,8 @@ enum nl80211_commands { * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). * This is similar to @NL80211_ATTR_STA_AID but with a difference of being * allowed to be used with the first @NL80211_CMD_SET_STATION command to - * update a TDLS peer STA entry. + * update a TDLS peer STA entry. For S1G interfaces, this is limited to + * 1600 for the current mac80211 implementation. * * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. * @@ -2621,7 +2717,8 @@ enum nl80211_commands { * a flow is assigned on each round of the DRR scheduler. * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from * association request when used with NL80211_CMD_NEW_STATION). Can be set - * only if %NL80211_STA_FLAG_WME is set. + * only if %NL80211_STA_FLAG_WME is set (except for NAN, which uses WME + * anyway). * * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing @@ -2850,8 +2947,9 @@ enum nl80211_commands { * index. If the userspace includes more RNR elements than number of * MBSSID elements then these will be added in every EMA beacon. * - * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is - * disabled. + * @NL80211_ATTR_MLO_LINK_DISABLED: Unused. It was used to indicate that a link + * is disabled during association. However, the AP will send the + * information by including a TTLM in the association response. * * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e. * include BSSes that can only be used in restricted scenarios and/or @@ -2881,9 +2979,9 @@ enum nl80211_commands { * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32). * A value of 0 means all radios. * - * @NL80211_ATTR_SUPPORTED_SELECTORS: supported selectors, array of - * supported selectors as defined by IEEE 802.11 7.3.2.2 but without the - * length restriction (at most %NL80211_MAX_SUPP_SELECTORS). + * @NL80211_ATTR_SUPPORTED_SELECTORS: supported BSS Membership Selectors, array + * of supported selectors as defined by IEEE Std 802.11-2020 9.4.2.3 but + * without the length restriction (at most %NL80211_MAX_SUPP_SELECTORS). * This can be used to provide a list of selectors that are implemented * by the supplicant. If not given, support for SAE_H2E is assumed. * @@ -2893,6 +2991,155 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * + * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and + * operations that userspace implements to use during association/ML + * link reconfig, currently only "BTM MLD Recommendation For Multiple + * APs Support". Drivers may set additional flags that they support + * in the kernel or device. + * + * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index + * of the radio in interest. Internally a value of -1 is used to + * indicate that the radio id is not given in user-space. This means + * that all the attributes are applicable to all the radios. If there is + * a radio index provided in user-space, the attributes will be + * applicable to that specific radio only. If the radio id is greater + * thank the number of radios, error denoting invalid value is returned. + * + * @NL80211_ATTR_S1G_LONG_BEACON_PERIOD: (u8) Integer attribute that represents + * the number of beacon intervals between each long beacon transmission + * for an S1G BSS with short beaconing enabled. This is a required + * attribute for initialising an S1G short beaconing BSS. When updating + * the short beacon data, this is not required. It has a minimum value of + * 2 (i.e 2 beacon intervals). + * + * @NL80211_ATTR_S1G_SHORT_BEACON: Nested attribute containing the short beacon + * head and tail used to set or update the short beacon templates. When + * bringing up a new interface, %NL80211_ATTR_S1G_LONG_BEACON_PERIOD is + * required alongside this attribute. Refer to + * @enum nl80211_s1g_short_beacon_attrs for the attribute definitions. + * + * @NL80211_ATTR_BSS_PARAM: nested attribute used with %NL80211_CMD_GET_WIPHY + * which indicates which BSS parameters can be modified. The attribute can + * also be used as flag attribute by user-space in %NL80211_CMD_SET_BSS to + * indicate that it wants strict checking on the BSS parameters to be + * modified. + * + * @NL80211_ATTR_NAN_CONFIG: Nested attribute for + * extended NAN cluster configuration. This is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG. + * See &enum nl80211_nan_conf_attributes for details. + * This attribute is optional. + * @NL80211_ATTR_NAN_NEW_CLUSTER: Flag attribute indicating that a new + * NAN cluster has been created. This is used with + * %NL80211_CMD_NAN_CLUSTER_JOINED + * @NL80211_ATTR_NAN_CAPABILITIES: Nested attribute for NAN capabilities. + * This is used with %NL80211_CMD_GET_WIPHY to indicate the NAN + * capabilities supported by the driver. See &enum nl80211_nan_capabilities + * for details. + * + * @NL80211_ATTR_S1G_PRIMARY_2MHZ: flag attribute indicating that the S1G + * primary channel is 2 MHz wide, and the control channel designates + * the 1 MHz primary subchannel within that 2 MHz primary. + * + * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP + * STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA + * + * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if HE/EHT are also available. + * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_NAN_CHANNEL: This is a nested attribute. There can be multiple + * attributes of this type, each one represents a channel definition and + * consists of top-level attributes like %NL80211_ATTR_WIPHY_FREQ. + * When used with %NL80211_CMD_NAN_SET_LOCAL_SCHED, it specifies + * the channel definitions on which the radio needs to operate during + * specific time slots. All of the channel definitions should be mutually + * incompatible. With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and + * %NL80211_ATTR_NAN_RX_NSS are mandatory. + * When used with %NL80211_CMD_NAN_SET_PEER_SCHED, it configures the + * peer NAN channels. In that case, the channel definitions can be + * compatible to each other, or even identical just with different RX NSS. + * With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and + * %NL80211_ATTR_NAN_RX_NSS are mandatory. + * The number of channels should fit the current configuration of channels + * and the possible interface combinations. + * If an existing NAN channel is changed but the chandef isn't, the + * channel entry must also remain unchanged. + * When used with %NL80211_CMD_NAN_CHANNEL_EVAC, this identifies the + * channels that were evacuated. + * @NL80211_ATTR_NAN_CHANNEL_ENTRY: a byte array of 6 bytes. contains the + * Channel Entry as defined in Wi-Fi Aware (TM) 4.0 specification Table + * 100 (Channel Entry format for the NAN Availability attribute). + * @NL80211_ATTR_NAN_RX_NSS: (u8) RX NSS used for a NAN channel. This is + * used with %NL80211_ATTR_NAN_CHANNEL when configuring NAN channels with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED or %NL80211_CMD_NAN_SET_PEER_SCHED. + * @NL80211_ATTR_NAN_TIME_SLOTS: an array of u8 values and 32 cells. each value + * maps a time slot to the chandef on which the radio should operate on in + * that time. %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled. + * The chandef is represented using its index, where the index is the + * sequential number of the %NL80211_ATTR_NAN_CHANNEL attribute within all + * the attributes of this type. + * Each slots spans over 16TUs, hence the entire schedule spans over + * 512TUs. Other slot durations and periods are currently not supported. + * @NL80211_ATTR_NAN_AVAIL_BLOB: (Binary) The NAN Availability attribute blob, + * including the attribute header, as defined in Wi-Fi Aware (TM) 4.0 + * specification Table 93 (NAN Availability attribute format). Required with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED to provide the raw NAN Availability + * attribute. Used by the device to publish Schedule Update NAFs. + * @NL80211_ATTR_NAN_SCHED_DEFERRED: Flag attribute used with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED. When present, the command is a + * request from the device to perform an announced schedule update. This + * means that it needs to send the updated NAN availability to the peers, + * and do the actual switch on the right time (i.e. at the end of the slot + * after the slot in which the updated NAN Availability was sent). Since + * the slots management is done in the device, the update to the peers + * needs to be sent by the device, so it knows the actual switch time. + * If the flag is not set, the schedule should be applied immediately. + * When this flag is set, the total number of NAN channels from both the + * old and new schedules must not exceed the allowed number of local NAN + * channels, because with deferred scheduling the old channels cannot be + * removed before adding the new ones to free up space. + * @NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS: flag attribute used with + * %NL80211_CMD_NAN_SCHED_UPDATE_DONE to indicate that the deferred + * schedule update completed successfully. If this flag is not present, + * the update failed. + * @NL80211_ATTR_NAN_NMI_MAC: The address of the NMI station to which this NDI + * station belongs. Used with %NL80211_CMD_NEW_STATION when adding an NDI + * station. + * @NL80211_ATTR_NAN_ULW: (Binary) The initial ULW(s) as published by the + * peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 109 + * (Unaligned Schedule attribute format). Used to configure the device + * with the initial ULW(s) of a peer, before the device starts tracking it. + * @NL80211_ATTR_NAN_COMMITTED_DW: (u16) The committed DW as published by the + * peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 80 + * (Committed DW Information field format). + * @NL80211_ATTR_NAN_SEQ_ID: (u8) The sequence ID of the peer schedule that + * %NL80211_CMD_NAN_SET_PEER_SCHED defines. The device follows the + * sequence ID in the frames to identify newer schedules. Once a schedule + * with a higher sequence ID is received, the device may stop communicating + * with that peer until a new peer schedule with a matching sequence ID is + * received. + * @NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME: (u16) The maximum channel switch + * time, in microseconds. + * @NL80211_ATTR_NAN_PEER_MAPS: Nested array of peer schedule maps. + * Used with %NL80211_CMD_NAN_SET_PEER_SCHED. Contains up to 2 entries, + * each containing nested attributes from &enum nl80211_nan_peer_map_attrs. + * + * @NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP: u32 attribute specifying + * the signal interference bitmap detected on the operating bandwidth for + * %NL80211_CMD_INCUMBENT_SIGNAL_DETECT. Each bit represents a 20 MHz + * segment, lowest bit corresponds to the lowest 20 MHz segment, in the + * operating bandwidth where the interference is detected. Punctured + * sub-channels are included in the bitmap structure; however, since + * interference detection is not performed on these sub-channels, their + * corresponding bits are consistently set to zero. + * + * @NL80211_ATTR_UHR_OPERATION: Full UHR Operation element, as it appears in + * association response etc., since it's abridged in the beacon. Used + * for START_AP etc. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3448,6 +3695,44 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, + NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + + NL80211_ATTR_WIPHY_RADIO_INDEX, + + NL80211_ATTR_S1G_LONG_BEACON_PERIOD, + NL80211_ATTR_S1G_SHORT_BEACON, + NL80211_ATTR_BSS_PARAM, + NL80211_ATTR_NAN_CONFIG, + NL80211_ATTR_NAN_NEW_CLUSTER, + NL80211_ATTR_NAN_CAPABILITIES, + + NL80211_ATTR_S1G_PRIMARY_2MHZ, + + NL80211_ATTR_EPP_PEER, + + NL80211_ATTR_UHR_CAPABILITY, + NL80211_ATTR_DISABLE_UHR, + + NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP, + + NL80211_ATTR_UHR_OPERATION, + + NL80211_ATTR_NAN_CHANNEL, + NL80211_ATTR_NAN_CHANNEL_ENTRY, + NL80211_ATTR_NAN_TIME_SLOTS, + NL80211_ATTR_NAN_RX_NSS, + NL80211_ATTR_NAN_AVAIL_BLOB, + NL80211_ATTR_NAN_SCHED_DEFERRED, + NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS, + + NL80211_ATTR_NAN_NMI_MAC, + + NL80211_ATTR_NAN_ULW, + NL80211_ATTR_NAN_COMMITTED_DW, + NL80211_ATTR_NAN_SEQ_ID, + NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME, + NL80211_ATTR_NAN_PEER_MAPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3541,6 +3826,9 @@ enum nl80211_attrs { * @NL80211_IFTYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) + * @NL80211_IFTYPE_NAN_DATA: NAN data interface type (netdev); NAN data + * interfaces can only be brought up (IFF_UP) when a NAN interface + * already exists and NAN has been started (using %NL80211_CMD_START_NAN). * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -3562,6 +3850,7 @@ enum nl80211_iftype { NL80211_IFTYPE_P2P_DEVICE, NL80211_IFTYPE_OCB, NL80211_IFTYPE_NAN, + NL80211_IFTYPE_NAN_DATA, /* keep last */ NUM_NL80211_IFTYPES, @@ -3694,6 +3983,22 @@ enum nl80211_eht_gi { }; /** + * enum nl80211_eht_ltf - EHT long training field + * @NL80211_RATE_INFO_EHT_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_EHT_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_EHT_4XLTF: 12.8 usec + * @NL80211_RATE_INFO_EHT_6XLTF: 19.2 usec + * @NL80211_RATE_INFO_EHT_8XLTF: 25.6 usec + */ +enum nl80211_eht_ltf { + NL80211_RATE_INFO_EHT_1XLTF, + NL80211_RATE_INFO_EHT_2XLTF, + NL80211_RATE_INFO_EHT_4XLTF, + NL80211_RATE_INFO_EHT_6XLTF, + NL80211_RATE_INFO_EHT_8XLTF, +}; + +/** * enum nl80211_eht_ru_alloc - EHT RU allocation values * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation @@ -3784,6 +4089,12 @@ enum nl80211_eht_ru_alloc { * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate + * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23) + * Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS) + * are used in conjunction with this where applicable + * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1, + * MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6. + * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3817,6 +4128,9 @@ enum nl80211_rate_info { NL80211_RATE_INFO_4_MHZ_WIDTH, NL80211_RATE_INFO_8_MHZ_WIDTH, NL80211_RATE_INFO_16_MHZ_WIDTH, + NL80211_RATE_INFO_UHR_MCS, + NL80211_RATE_INFO_UHR_ELR, + NL80211_RATE_INFO_UHR_IM, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -4139,6 +4453,10 @@ enum nl80211_mpath_info { * capabilities element * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as * defined in EHT capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR + * capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ @@ -4156,6 +4474,8 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -4220,6 +4540,46 @@ enum nl80211_band_attr { #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA /** + * enum nl80211_nan_phy_cap_attr - NAN PHY capabilities attributes + * @__NL80211_NAN_PHY_CAP_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET: 16-byte attribute containing HT MCS set + * @NL80211_NAN_PHY_CAP_ATTR_HT_CAPA: HT capabilities (u16) + * @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR: HT A-MPDU factor (u8) + * @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY: HT A-MPDU density (u8) + * @NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET: 8-byte attribute containing VHT MCS set + * @NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA: VHT capabilities (u32) + * @NL80211_NAN_PHY_CAP_ATTR_HE_MAC: HE MAC capabilities + * @NL80211_NAN_PHY_CAP_ATTR_HE_PHY: HE PHY capabilities + * @NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET: HE supported NSS/MCS combinations + * @NL80211_NAN_PHY_CAP_ATTR_HE_PPE: HE PPE thresholds + * @NL80211_NAN_PHY_CAP_ATTR_MAX: highest NAN PHY cap attribute number + * @__NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST: internal use + */ +enum nl80211_nan_phy_cap_attr { + __NL80211_NAN_PHY_CAP_ATTR_INVALID, + + /* HT capabilities */ + NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_HT_CAPA, + NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR, + NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY, + + /* VHT capabilities */ + NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA, + + /* HE capabilities */ + NL80211_NAN_PHY_CAP_ATTR_HE_MAC, + NL80211_NAN_PHY_CAP_ATTR_HE_PHY, + NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_HE_PPE, + + /* keep last */ + __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST, + NL80211_NAN_PHY_CAP_ATTR_MAX = __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_wmm_rule - regulatory wmm rule * * @__NL80211_WMMR_INVALID: attribute number 0 is reserved @@ -4327,6 +4687,23 @@ enum nl80211_wmm_rule { * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a * very low power (VLP) AP, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in + * 20 MHz bandwidth, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_NO_4MHZ: 4 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_8MHZ: 8 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use + * as a primary channel. Does not prevent the channel from existing + * as a non-primary subchannel. Only applicable to S1G channels. + * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_CAC_START_TIME: Channel Availability Check (CAC) + * start time (CLOCK_BOOTTIME, nanoseconds). Only present when CAC is + * currently in progress on this channel. + * @NL80211_FREQUENCY_ATTR_PAD: attribute used for padding for 64-bit alignment * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4371,6 +4748,14 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, + NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, + NL80211_FREQUENCY_ATTR_NO_4MHZ, + NL80211_FREQUENCY_ATTR_NO_8MHZ, + NL80211_FREQUENCY_ATTR_NO_16MHZ, + NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY, + NL80211_FREQUENCY_ATTR_NO_UHR, + NL80211_FREQUENCY_ATTR_CAC_START_TIME, + NL80211_FREQUENCY_ATTR_PAD, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4582,31 +4967,36 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. + * @NL80211_RRF_NO_UHR: UHR operation not allowed */ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_IR_CONCURRENT = 1<<12, - NL80211_RRF_NO_HT40MINUS = 1<<13, - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, - NL80211_RRF_NO_HE = 1<<17, - NL80211_RRF_NO_320MHZ = 1<<18, - NL80211_RRF_NO_EHT = 1<<19, - NL80211_RRF_PSD = 1<<20, - NL80211_RRF_DFS_CONCURRENT = 1<<21, - NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, - NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, - NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, + NL80211_RRF_NO_OFDM = 1 << 0, + NL80211_RRF_NO_CCK = 1 << 1, + NL80211_RRF_NO_INDOOR = 1 << 2, + NL80211_RRF_NO_OUTDOOR = 1 << 3, + NL80211_RRF_DFS = 1 << 4, + NL80211_RRF_PTP_ONLY = 1 << 5, + NL80211_RRF_PTMP_ONLY = 1 << 6, + NL80211_RRF_NO_IR = 1 << 7, + __NL80211_RRF_NO_IBSS = 1 << 8, + NL80211_RRF_AUTO_BW = 1 << 11, + NL80211_RRF_IR_CONCURRENT = 1 << 12, + NL80211_RRF_NO_HT40MINUS = 1 << 13, + NL80211_RRF_NO_HT40PLUS = 1 << 14, + NL80211_RRF_NO_80MHZ = 1 << 15, + NL80211_RRF_NO_160MHZ = 1 << 16, + NL80211_RRF_NO_HE = 1 << 17, + NL80211_RRF_NO_320MHZ = 1 << 18, + NL80211_RRF_NO_EHT = 1 << 19, + NL80211_RRF_PSD = 1 << 20, + NL80211_RRF_DFS_CONCURRENT = 1 << 21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1 << 22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, + NL80211_RRF_NO_UHR = 1 << 26, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4727,8 +5117,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP * @NL80211_MNTR_FLAG_CONTROL: pass control frames * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. + * @NL80211_MNTR_FLAG_COOK_FRAMES: deprecated + * will unconditionally be refused * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address * and ACK incoming unicast packets. * @NL80211_MNTR_FLAG_SKIP_TX: do not pass local tx packets @@ -5301,6 +5691,9 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key + * @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange + * @NL80211_AUTHTYPE_IEEE8021X: IEEE 802.1X authentication utilizing + * Authentication frames * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -5316,6 +5709,8 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FILS_SK, NL80211_AUTHTYPE_FILS_SK_PFS, NL80211_AUTHTYPE_FILS_PK, + NL80211_AUTHTYPE_EPPKE, + NL80211_AUTHTYPE_IEEE8021X, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -5433,6 +5828,10 @@ enum nl80211_key_attributes { * see &struct nl80211_txrate_he * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. + * @NL80211_TXRATE_EHT: EHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_eht + * @NL80211_TXRATE_EHT_GI: configure EHT GI, (u8, see &enum nl80211_eht_gi) + * @NL80211_TXRATE_EHT_LTF: configure EHT LTF, (u8, see &enum nl80211_eht_ltf) * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -5445,6 +5844,9 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_HE, NL80211_TXRATE_HE_GI, NL80211_TXRATE_HE_LTF, + NL80211_TXRATE_EHT, + NL80211_TXRATE_EHT_GI, + NL80211_TXRATE_EHT_LTF, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -5477,6 +5879,15 @@ enum nl80211_txrate_gi { NL80211_TXRATE_FORCE_LGI, }; +#define NL80211_EHT_NSS_MAX 16 +/** + * struct nl80211_txrate_eht - EHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_eht { + __u16 mcs[NL80211_EHT_NSS_MAX]; +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band @@ -6601,6 +7012,23 @@ enum nl80211_feature_flags { * (signaling and payload protected) A-MSDUs and this shall be advertised * in the RSNXE. * + * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate + * configuration (AP/mesh) with EHT rates. + * + * @NL80211_EXT_FEATURE_EPPKE: Driver supports Enhanced Privacy Protection + * Key Exchange (EPPKE) with user space SME (NL80211_CMD_AUTHENTICATE) + * in non-AP STA mode. + * + * @NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION: This specifies that the + * driver supports encryption of (Re)Association Request and Response + * frames in both non‑AP STA and AP mode as specified in + * "IEEE P802.11bi/D3.0, 12.16.6". + * + * @NL80211_EXT_FEATURE_IEEE8021X_AUTH: Driver supports IEEE 802.1X + * authentication utilizing Authentication frames with user space SME + * (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in + * "IEEE P802.11bi/D4.0, 12.16.5". + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6676,6 +7104,10 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, NL80211_EXT_FEATURE_DFS_CONCURRENT, NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, + NL80211_EXT_FEATURE_BEACON_RATE_EHT, + NL80211_EXT_FEATURE_EPPKE, + NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, + NL80211_EXT_FEATURE_IEEE8021X_AUTH, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7231,6 +7663,107 @@ enum nl80211_nan_match_attributes { }; /** + * enum nl80211_nan_band_conf_attributes - NAN band configuration attributes + * @__NL80211_NAN_BAND_CONF_INVALID: Invalid. + * @NL80211_NAN_BAND_CONF_BAND: Band for which the configuration is + * being set. The value is according to &enum nl80211_band (u8). + * @NL80211_NAN_BAND_CONF_FREQ: Discovery frequency. This attribute shall not + * be present on 2.4 GHZ band. On 5 GHz band its presence is optional. + * The allowed values are 5220 (channel 44) or 5745 (channel 149). + * If not present, channel 149 is used if allowed, otherwise channel 44 + * will be selected. The value is in MHz (u16). + * @NL80211_NAN_BAND_CONF_RSSI_CLOSE: RSSI close threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not specified, default device value is used. The value should + * be greater than -60 dBm (s8). + * @NL80211_NAN_BAND_CONF_RSSI_MIDDLE: RSSI middle threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not present, default device value is used. The value should be + * greater than -75 dBm and less than %NL80211_NAN_BAND_CONF_RSSI_CLOSE + * (s8). + * @NL80211_NAN_BAND_CONF_WAKE_DW: Committed DW information (values 0-5). + * Value 0 means that the device will not wake up during the + * discovery window. Values 1-5 mean that the device will wake up + * during each 2^(n - 1) discovery window, where n is the value of + * this attribute. Setting this attribute to 0 is not allowed on + * 2.4 GHz band (u8). This is an optional parameter (default is 1). + * @NL80211_NAN_BAND_CONF_DISABLE_SCAN: Optional flag attribute to disable + * scanning (for cluster merge) on the band. If set, the device will not + * scan on this band anymore. Disabling scanning on 2.4 GHz band is not + * allowed. + * @NUM_NL80211_NAN_BAND_CONF_ATTR: Internal. + * @NL80211_NAN_BAND_CONF_ATTR_MAX: Highest NAN band configuration attribute. + * + * These attributes are used to configure NAN band-specific parameters. Note, + * that both RSSI attributes should be configured (or both left unset). + */ +enum nl80211_nan_band_conf_attributes { + __NL80211_NAN_BAND_CONF_INVALID, + NL80211_NAN_BAND_CONF_BAND, + NL80211_NAN_BAND_CONF_FREQ, + NL80211_NAN_BAND_CONF_RSSI_CLOSE, + NL80211_NAN_BAND_CONF_RSSI_MIDDLE, + NL80211_NAN_BAND_CONF_WAKE_DW, + NL80211_NAN_BAND_CONF_DISABLE_SCAN, + + /* keep last */ + NUM_NL80211_NAN_BAND_CONF_ATTR, + NL80211_NAN_BAND_CONF_ATTR_MAX = NUM_NL80211_NAN_BAND_CONF_ATTR - 1, +}; + +/** + * enum nl80211_nan_conf_attributes - NAN configuration attributes + * @__NL80211_NAN_CONF_INVALID: Invalid attribute, used for validation. + * @NL80211_NAN_CONF_CLUSTER_ID: ID for the NAN cluster. This is a MAC + * address that can take values from 50-6F-9A-01-00-00 to + * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, + * a random Cluster ID will be chosen. + * This attribute will be ignored in NL80211_CMD_CHANGE_NAN_CONFIG + * since after NAN was started, the cluster ID can no longer change. + * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be + * published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will + * be published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_BAND_CONFIGS: This is a nested array attribute, + * containing multiple entries for each supported band. Each band + * configuration consists of &enum nl80211_nan_band_conf_attributes. + * @NL80211_NAN_CONF_SCAN_PERIOD: Scan period in seconds. If not configured, + * device default is used. Zero value will disable scanning. + * This is u16 (optional). + * @NL80211_NAN_CONF_SCAN_DWELL_TIME: Scan dwell time in TUs per channel. + * Only non-zero values are valid. If not configured the device default + * value is used. This is u16 (optional) + * @NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL: Discovery beacon interval + * in TUs. Valid range is 50-200 TUs. If not configured the device default + * value is used. This is u8 (optional) + * @NL80211_NAN_CONF_NOTIFY_DW: If set, the driver will notify userspace about + * the upcoming discovery window with + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION. + * This is a flag attribute. + * @NUM_NL80211_NAN_CONF_ATTR: Internal. + * @NL80211_NAN_CONF_ATTR_MAX: Highest NAN configuration attribute. + * + * These attributes are used to configure NAN-specific parameters. + */ +enum nl80211_nan_conf_attributes { + __NL80211_NAN_CONF_INVALID, + NL80211_NAN_CONF_CLUSTER_ID, + NL80211_NAN_CONF_EXTRA_ATTRS, + NL80211_NAN_CONF_VENDOR_ELEMS, + NL80211_NAN_CONF_BAND_CONFIGS, + NL80211_NAN_CONF_SCAN_PERIOD, + NL80211_NAN_CONF_SCAN_DWELL_TIME, + NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL, + NL80211_NAN_CONF_NOTIFY_DW, + + /* keep last */ + NUM_NL80211_NAN_CONF_ATTR, + NL80211_NAN_CONF_ATTR_MAX = NUM_NL80211_NAN_CONF_ATTR - 1, +}; + +/** * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. @@ -7523,6 +8056,30 @@ enum nl80211_peer_measurement_attrs { * trigger based ranging measurement is supported * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating * if non-trigger-based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT: flag attribute indicating if + * ranging on the 6 GHz band is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can transmit in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can receive in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP TX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP RX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX: u32 attribute indicating the + * maximum total number of LTFs the device can transmit. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX: u32 attribute indicating the + * maximum total number of LTFs the device can receive. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the + * device supports operating as the RSTA in PMSR FTM request * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -7540,6 +8097,14 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, @@ -7555,12 +8120,15 @@ enum nl80211_peer_measurement_ftm_capa { * &enum nl80211_preamble), optional for DMG (u32) * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" - * (u8, 0-15, optional with default 15 i.e. "no preference") + * (u8, 0-15, optional with default 15 i.e. "no preference". No limit for + * non-EDCA ranging) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units * of 100ms (u16, optional with default 0) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with - * default 15 i.e. "no preference") + * default 15 i.e. "no preference"). For non-EDCA ranging, this is the + * burst duration in milliseconds (optional with default 0, i.e. let the + * device decide). * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames * requested per burst * (u8, 0-31, optional with default 0 i.e. "no preference") @@ -7589,6 +8157,14 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_RSTA: optional. Request to perform the measurement + * as the RSTA (flag). When set, the device is expected to dwell on the + * channel specified in %NL80211_PMSR_PEER_ATTR_CHAN until it receives the + * FTM request from the peer or the timeout specified by + * %NL80211_ATTR_TIMEOUT has expired. + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the + * RSTA will have the measurement results to report back in the FTM + * response). * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -7609,6 +8185,7 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, + NL80211_PMSR_FTM_REQ_ATTR_RSTA, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -7693,6 +8270,8 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * 9.4.2.22.1) starting with the Measurement Token, with Measurement * Type 11. * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by + * the responder (similar to request, u16) * * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number @@ -7721,6 +8300,7 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_LCI, NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, NL80211_PMSR_FTM_RESP_ATTR_PAD, + NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, /* keep last */ NUM_NL80211_PMSR_FTM_RESP_ATTR, @@ -8022,6 +8602,11 @@ enum nl80211_sar_specs_attrs { * Setting this flag is permitted only if the driver advertises EMA support * by setting wiphy->ema_max_profile_periodicity to non-zero. * + * @NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID: Link ID of the transmitted profile. + * This parameter is mandatory when NL80211_ATTR_MBSSID_CONFIG attributes + * are sent for a non-transmitted profile and if the transmitted profile + * is part of an MLD. For all other cases this parameter is unnecessary. + * * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute */ @@ -8033,6 +8618,7 @@ enum nl80211_mbssid_config_attributes { NL80211_MBSSID_CONFIG_ATTR_INDEX, NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, NL80211_MBSSID_CONFIG_ATTR_EMA, + NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID, /* keep last */ __NL80211_MBSSID_CONFIG_ATTR_LAST, @@ -8068,6 +8654,7 @@ enum nl80211_ap_settings_flags { * and contains attributes defined in &enum nl80211_if_combination_attrs. * @NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK: bitmask (u32) of antennas * connected to this radio. + * @NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD: RTS threshold (u32) of this radio. * * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute @@ -8079,6 +8666,7 @@ enum nl80211_wiphy_radio_attrs { NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK, + NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD, /* keep last */ __NL80211_WIPHY_RADIO_ATTR_LAST, @@ -8108,4 +8696,108 @@ enum nl80211_wiphy_radio_freq_range { NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, }; +/** + * enum nl80211_s1g_short_beacon_attrs - S1G short beacon data + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_INVALID: Invalid + * + * @NL80211_S1G_SHORT_BEACON_ATTR_HEAD: Short beacon head (binary). + * @NL80211_S1G_SHORT_BEACON_ATTR_TAIL: Short beacon tail (binary). + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_LAST: Internal + * @NL80211_S1G_SHORT_BEACON_ATTR_MAX: Highest attribute + */ +enum nl80211_s1g_short_beacon_attrs { + __NL80211_S1G_SHORT_BEACON_ATTR_INVALID, + + NL80211_S1G_SHORT_BEACON_ATTR_HEAD, + NL80211_S1G_SHORT_BEACON_ATTR_TAIL, + + /* keep last */ + __NL80211_S1G_SHORT_BEACON_ATTR_LAST, + NL80211_S1G_SHORT_BEACON_ATTR_MAX = + __NL80211_S1G_SHORT_BEACON_ATTR_LAST - 1 +}; + +/** + * enum nl80211_nan_capabilities - NAN (Neighbor Aware Networking) + * capabilities. + * + * @__NL80211_NAN_CAPABILITIES_INVALID: Invalid. + * @NL80211_NAN_CAPA_CONFIGURABLE_SYNC: Flag attribute indicating that + * the device supports configurable synchronization. If set, the device + * should be able to handle %NL80211_ATTR_NAN_CONFIG + * attribute in the %NL80211_CMD_START_NAN (and change) command. + * @NL80211_NAN_CAPA_USERSPACE_DE: Flag attribute indicating that + * NAN Discovery Engine (DE) is not offloaded and the driver assumes + * user space DE implementation. When set, %NL80211_CMD_ADD_NAN_FUNCTION, + * %NL80211_CMD_DEL_NAN_FUNCTION and %NL80211_CMD_NAN_MATCH commands + * should not be used. In addition, the device/driver should support + * sending discovery window (DW) notifications using + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION and handling transmission and + * reception of NAN SDF frames on NAN device interface during DW windows. + * (%NL80211_CMD_FRAME is used to transmit SDFs) + * @NL80211_NAN_CAPA_OP_MODE: u8 attribute indicating the supported operation + * modes as defined in Wi-Fi Aware (TM) specification Table 81 (Operation + * Mode field format). + * @NL80211_NAN_CAPA_NUM_ANTENNAS: u8 attribute indicating the number of + * TX and RX antennas supported by the device. Lower nibble indicates + * the number of TX antennas and upper nibble indicates the number of RX + * antennas. Value 0 indicates the information is not available. + * See table 79 of Wi-Fi Aware (TM) specification (Number of + * Antennas field). + * @NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME: u16 attribute indicating the + * maximum time in microseconds that the device requires to switch + * channels. + * @NL80211_NAN_CAPA_CAPABILITIES: u8 attribute containing the + * capabilities of the device as defined in Wi-Fi Aware (TM) + * specification Table 79 (Capabilities field). + * @NL80211_NAN_CAPA_PHY: nested attribute containing band-agnostic + * capabilities for NAN data path. See &enum nl80211_nan_phy_cap_attr. + * @__NL80211_NAN_CAPABILITIES_LAST: Internal + * @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute. + */ +enum nl80211_nan_capabilities { + __NL80211_NAN_CAPABILITIES_INVALID, + + NL80211_NAN_CAPA_CONFIGURABLE_SYNC, + NL80211_NAN_CAPA_USERSPACE_DE, + NL80211_NAN_CAPA_OP_MODE, + NL80211_NAN_CAPA_NUM_ANTENNAS, + NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME, + NL80211_NAN_CAPA_CAPABILITIES, + NL80211_NAN_CAPA_PHY, + /* keep last */ + __NL80211_NAN_CAPABILITIES_LAST, + NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1, +}; + +/** + * enum nl80211_nan_peer_map_attrs - NAN peer schedule map attributes + * + * Nested attributes used within %NL80211_ATTR_NAN_PEER_MAPS to define + * individual peer schedule maps. + * + * @__NL80211_NAN_PEER_MAP_ATTR_INVALID: Invalid + * @NL80211_NAN_PEER_MAP_ATTR_MAP_ID: (u8) The map ID for this schedule map. + * @NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS: An array of u8 values with 32 cells. + * Each value maps a time slot to a channel index within the schedule's + * channel list (%NL80211_ATTR_NAN_CHANNEL attributes). + * %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled. + * @__NL80211_NAN_PEER_MAP_ATTR_LAST: Internal + * @NL80211_NAN_PEER_MAP_ATTR_MAX: Highest peer map attribute + */ +enum nl80211_nan_peer_map_attrs { + __NL80211_NAN_PEER_MAP_ATTR_INVALID, + + NL80211_NAN_PEER_MAP_ATTR_MAP_ID, + NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS, + + /* keep last */ + __NL80211_NAN_PEER_MAP_ATTR_LAST, + NL80211_NAN_PEER_MAP_ATTR_MAX = __NL80211_NAN_PEER_MAP_ATTR_LAST - 1, +}; + +#define NL80211_NAN_SCHED_NOT_AVAIL_SLOT 0xff + #endif /* __LINUX_NL80211_H */ |