diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 72 |
1 files changed, 43 insertions, 29 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f6c1b181c886..ddcc4cda74af 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -2881,9 +2881,9 @@ enum nl80211_commands { * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32). * A value of 0 means all radios. * - * @NL80211_ATTR_SUPPORTED_SELECTORS: supported selectors, array of - * supported selectors as defined by IEEE 802.11 7.3.2.2 but without the - * length restriction (at most %NL80211_MAX_SUPP_SELECTORS). + * @NL80211_ATTR_SUPPORTED_SELECTORS: supported BSS Membership Selectors, array + * of supported selectors as defined by IEEE Std 802.11-2020 9.4.2.3 but + * without the length restriction (at most %NL80211_MAX_SUPP_SELECTORS). * This can be used to provide a list of selectors that are implemented * by the supplicant. If not given, support for SAE_H2E is assumed. * @@ -2893,6 +2893,12 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * + * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and + * operations that userspace implements to use during association/ML + * link reconfig, currently only "BTM MLD Recommendation For Multiple + * APs Support". Drivers may set additional flags that they support + * in the kernel or device. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3448,6 +3454,8 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, + NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4327,6 +4335,8 @@ enum nl80211_wmm_rule { * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a * very low power (VLP) AP, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in + * 20 MHz bandwidth, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4371,6 +4381,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, + NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4582,31 +4593,34 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_IR_CONCURRENT = 1<<12, - NL80211_RRF_NO_HT40MINUS = 1<<13, - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, - NL80211_RRF_NO_HE = 1<<17, - NL80211_RRF_NO_320MHZ = 1<<18, - NL80211_RRF_NO_EHT = 1<<19, - NL80211_RRF_PSD = 1<<20, - NL80211_RRF_DFS_CONCURRENT = 1<<21, - NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, - NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, - NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, + NL80211_RRF_NO_OFDM = 1 << 0, + NL80211_RRF_NO_CCK = 1 << 1, + NL80211_RRF_NO_INDOOR = 1 << 2, + NL80211_RRF_NO_OUTDOOR = 1 << 3, + NL80211_RRF_DFS = 1 << 4, + NL80211_RRF_PTP_ONLY = 1 << 5, + NL80211_RRF_PTMP_ONLY = 1 << 6, + NL80211_RRF_NO_IR = 1 << 7, + __NL80211_RRF_NO_IBSS = 1 << 8, + NL80211_RRF_AUTO_BW = 1 << 11, + NL80211_RRF_IR_CONCURRENT = 1 << 12, + NL80211_RRF_NO_HT40MINUS = 1 << 13, + NL80211_RRF_NO_HT40PLUS = 1 << 14, + NL80211_RRF_NO_80MHZ = 1 << 15, + NL80211_RRF_NO_160MHZ = 1 << 16, + NL80211_RRF_NO_HE = 1 << 17, + NL80211_RRF_NO_320MHZ = 1 << 18, + NL80211_RRF_NO_EHT = 1 << 19, + NL80211_RRF_PSD = 1 << 20, + NL80211_RRF_DFS_CONCURRENT = 1 << 21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1 << 22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4727,8 +4741,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP * @NL80211_MNTR_FLAG_CONTROL: pass control frames * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. + * @NL80211_MNTR_FLAG_COOK_FRAMES: deprecated + * will unconditionally be refused * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address * and ACK incoming unicast packets. * @NL80211_MNTR_FLAG_SKIP_TX: do not pass local tx packets |