diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 155 |
1 files changed, 129 insertions, 26 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 27acf1292a5c..efbd79c67be2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -7,7 +7,7 @@ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation */ #include <linux/ethtool.h> @@ -127,6 +127,8 @@ struct wiphy; * even if it is otherwise disabled. * @IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP: Allow using this channel for AP operation * with very low power (VLP), even if otherwise set to NO_IR. + * @IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY: Allow activity on a 20 MHz channel, + * even if otherwise set to NO_IR. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = BIT(0), @@ -155,6 +157,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = BIT(23), IEEE80211_CHAN_CAN_MONITOR = BIT(24), IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP = BIT(25), + IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY = BIT(26), }; #define IEEE80211_CHAN_NO_HT40 \ @@ -1006,6 +1009,17 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width); /** + * cfg80211_chandef_get_width - return chandef width in MHz + * @c: chandef to return bandwidth for + * Return: channel width in MHz for the given chandef; note that it returns + * 80 for 80+80 configurations + */ +static inline int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + return nl80211_chan_width_to_mhz(c->width); +} + +/** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check * Return: %true if the channel definition is valid. %false otherwise. @@ -2045,9 +2059,6 @@ struct cfg80211_tid_stats { * @assoc_at: bootime (ns) of the last association * @rx_bytes: bytes (size of MPDUs) received from this station * @tx_bytes: bytes (size of MPDUs) transmitted to this station - * @llid: mesh local link id - * @plid: mesh peer link id - * @plink_state: mesh peer link state * @signal: The signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. @@ -2067,14 +2078,20 @@ struct cfg80211_tid_stats { * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. + * @beacon_loss_count: Number of times beacon loss event has triggered. * @assoc_req_ies: IEs from (Re)Association Request. * This is used only when in AP mode with drivers that do not use * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. * @sta_flags: station flags mask & values - * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @llid: mesh local link id + * @plid: mesh peer link id + * @plink_state: mesh peer link state + * @connected_to_gate: true if mesh STA has a path to mesh gate + * @connected_to_as: true if mesh STA has a path to authentication server + * @airtime_link_metric: mesh airtime link metric. * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode @@ -2083,7 +2100,6 @@ struct cfg80211_tid_stats { * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer - * @connected_to_gate: true if mesh STA has a path to mesh gate * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer * @airtime_weight: current airtime scheduling weight @@ -2097,8 +2113,6 @@ struct cfg80211_tid_stats { * @fcs_err_count: number of packets (MPDUs) received from this station with * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. - * @airtime_link_metric: mesh airtime link metric. - * @connected_to_as: true if mesh STA has a path to authentication server * @mlo_params_valid: Indicates @assoc_link_id and @mld_addr fields are filled * by driver. Drivers use this only in cfg80211_new_sta() calls when AP * MLD's MLME/SME is offload to driver. Drivers won't fill this @@ -2125,9 +2139,6 @@ struct station_info { u64 assoc_at; u64 rx_bytes; u64 tx_bytes; - u16 llid; - u16 plid; - u8 plink_state; s8 signal; s8 signal_avg; @@ -2147,36 +2158,38 @@ struct station_info { int generation; + u32 beacon_loss_count; + const u8 *assoc_req_ies; size_t assoc_req_ies_len; - u32 beacon_loss_count; s64 t_offset; + u16 llid; + u16 plid; + u8 plink_state; + u8 connected_to_gate; + u8 connected_to_as; + u32 airtime_link_metric; enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; u32 expected_throughput; - u64 tx_duration; - u64 rx_duration; - u64 rx_beacon; - u8 rx_beacon_signal_avg; - u8 connected_to_gate; + u16 airtime_weight; - struct cfg80211_tid_stats *pertid; s8 ack_signal; s8 avg_ack_signal; + struct cfg80211_tid_stats *pertid; - u16 airtime_weight; + u64 tx_duration; + u64 rx_duration; + u64 rx_beacon; + u8 rx_beacon_signal_avg; u32 rx_mpdu_count; u32 fcs_err_count; - u32 airtime_link_metric; - - u8 connected_to_as; - bool mlo_params_valid; u8 assoc_link_id; u8 mld_addr[ETH_ALEN] __aligned(2); @@ -2265,7 +2278,7 @@ static inline int cfg80211_get_station(struct net_device *dev, * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP * @MONITOR_FLAG_CONTROL: pass control frames * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering - * @MONITOR_FLAG_COOK_FRAMES: report frames after processing + * @MONITOR_FLAG_COOK_FRAMES: deprecated, will unconditionally be refused * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address * @MONITOR_FLAG_SKIP_TX: do not pass locally transmitted frames */ @@ -2947,6 +2960,7 @@ struct cfg80211_bss_ies { * @nontrans_list: list of non-transmitted BSS, if this is a transmitted one * (multi-BSSID support) * @signal: signal strength value (type depends on the wiphy's signal_type) + * @ts_boottime: timestamp of the last BSS update in nanoseconds since boot * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. * @bssid_index: index in the multiple BSS set @@ -2971,6 +2985,8 @@ struct cfg80211_bss { s32 signal; + u64 ts_boottime; + u16 beacon_interval; u16 capability; @@ -3023,6 +3039,10 @@ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id) * * @bss: The BSS to authenticate with, the callee must obtain a reference * to it if it needs to keep it. + * @supported_selectors: List of selectors that should be assumed to be + * supported by the station. + * SAE_H2E must be assumed supported if set to %NULL. + * @supported_selectors_len: Length of supported_selectors in octets. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets @@ -3045,6 +3065,8 @@ struct cfg80211_auth_request { struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; + const u8 *supported_selectors; + u8 supported_selectors_len; enum nl80211_auth_type auth_type; const u8 *key; u8 key_len; @@ -3075,6 +3097,19 @@ struct cfg80211_assoc_link { }; /** + * struct cfg80211_ml_reconf_req - MLO link reconfiguration request + * @add_links: data for links to add, see &struct cfg80211_assoc_link + * @rem_links: bitmap of links to remove + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the ML reconfiguration action frame + */ +struct cfg80211_ml_reconf_req { + struct cfg80211_assoc_link add_links[IEEE80211_MLD_MAX_NUM_LINKS]; + u16 rem_links; + u16 ext_mld_capa_ops; +}; + +/** * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. * * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) @@ -3124,6 +3159,10 @@ enum cfg80211_assoc_req_flags { * included in the Current AP address field of the Reassociation Request * frame. * @flags: See &enum cfg80211_assoc_req_flags + * @supported_selectors: supported BSS selectors in IEEE 802.11 format + * (or %NULL for no change). + * If %NULL, then support for SAE_H2E should be assumed. + * @supported_selectors_len: number of supported BSS selectors * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. @@ -3142,6 +3181,8 @@ enum cfg80211_assoc_req_flags { * the link on which the association request should be sent * @ap_mld_addr: AP MLD address in case of MLO association request, * valid iff @link_id >= 0 + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the association */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; @@ -3150,6 +3191,8 @@ struct cfg80211_assoc_request { struct cfg80211_crypto_settings crypto; bool use_mfp; u32 flags; + const u8 *supported_selectors; + u8 supported_selectors_len; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa, vht_capa_mask; @@ -3160,6 +3203,7 @@ struct cfg80211_assoc_request { struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS]; const u8 *ap_mld_addr; s8 link_id; + u16 ext_mld_capa_ops; }; /** @@ -4582,8 +4626,18 @@ struct mgmt_frame_regs { * * @set_hw_timestamp: Enable/disable HW timestamping of TM/FTM frames. * @set_ttlm: set the TID to link mapping. + * @set_epcs: Enable/Disable EPCS for station mode. * @get_radio_mask: get bitmask of radios in use. * (invoked with the wiphy mutex held) + * @assoc_ml_reconf: Request a non-AP MLO connection to perform ML + * reconfiguration, i.e., add and/or remove links to/from the + * association using ML reconfiguration action frames. Successfully added + * links will be added to the set of valid links. Successfully removed + * links will be removed from the set of valid links. The driver must + * indicate removed links by calling cfg80211_links_removed() and added + * links by calling cfg80211_mlo_reconf_add_done(). When calling + * cfg80211_mlo_reconf_add_done() the bss pointer must be given for each + * link for which MLO reconfiguration 'add' operation was requested. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -4733,7 +4787,7 @@ struct cfg80211_ops { int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, - int *dbm); + unsigned int link_id, int *dbm); void (*rfkill_poll)(struct wiphy *wiphy); @@ -4947,6 +5001,10 @@ struct cfg80211_ops { int (*set_ttlm)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ttlm_params *params); u32 (*get_radio_mask)(struct wiphy *wiphy, struct net_device *dev); + int (*assoc_ml_reconf)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ml_reconf_req *req); + int (*set_epcs)(struct wiphy *wiphy, struct net_device *dev, + bool val); }; /* @@ -5957,7 +6015,7 @@ int wiphy_register(struct wiphy *wiphy); * @wiphy: the wiphy to check the locking on * @p: The pointer to read, prior to dereferencing * - * Return the value of the specified RCU-protected pointer, but omit the + * Return: the value of the specified RCU-protected pointer, but omit the * READ_ONCE(), because caller holds the wiphy mutex used for updates. */ #define wiphy_dereference(wiphy, p) \ @@ -6031,6 +6089,10 @@ static inline void wiphy_unlock(struct wiphy *wiphy) mutex_unlock(&wiphy->mtx); } +DEFINE_GUARD(wiphy, struct wiphy *, + mutex_lock(&_T->mtx), + mutex_unlock(&_T->mtx)) + struct wiphy_work; typedef void (*wiphy_work_func_t)(struct wiphy *, struct wiphy_work *); @@ -9701,6 +9763,40 @@ static inline int cfg80211_color_change_notify(struct net_device *dev, void cfg80211_links_removed(struct net_device *dev, u16 link_mask); /** + * struct cfg80211_mlo_reconf_done_data - MLO reconfiguration data + * @buf: MLO Reconfiguration Response frame (header + body) + * @len: length of the frame data + * @added_links: BIT mask of links successfully added to the association + * @links: per-link information indexed by link ID + * @links.bss: the BSS that MLO reconfiguration was requested for, ownership of + * the pointer moves to cfg80211 in the call to + * cfg80211_mlo_reconf_add_done(). + * + * The BSS pointer must be set for each link for which 'add' operation was + * requested in the assoc_ml_reconf callback. + */ +struct cfg80211_mlo_reconf_done_data { + const u8 *buf; + size_t len; + u16 added_links; + struct { + struct cfg80211_bss *bss; + u8 *addr; + } links[IEEE80211_MLD_MAX_NUM_LINKS]; +}; + +/** + * cfg80211_mlo_reconf_add_done - Notify about MLO reconfiguration result + * @dev: network device. + * @data: MLO reconfiguration done data, &struct cfg80211_mlo_reconf_done_data + * + * Inform cfg80211 and the userspace that processing of ML reconfiguration + * request to add links to the association is done. + */ +void cfg80211_mlo_reconf_add_done(struct net_device *dev, + struct cfg80211_mlo_reconf_done_data *data); + +/** * cfg80211_schedule_channels_check - schedule regulatory check if needed * @wdev: the wireless device to check * @@ -9710,6 +9806,13 @@ void cfg80211_links_removed(struct net_device *dev, u16 link_mask); */ void cfg80211_schedule_channels_check(struct wireless_dev *wdev); +/** + * cfg80211_epcs_changed - Notify about a change in EPCS state + * @netdev: the wireless device whose EPCS state changed + * @enabled: set to true if EPCS was enabled, otherwise set to false. + */ +void cfg80211_epcs_changed(struct net_device *netdev, bool enabled); + #ifdef CONFIG_CFG80211_DEBUGFS /** * wiphy_locked_debugfs_read - do a locked read in debugfs |