diff options
Diffstat (limited to 'drivers')
76 files changed, 783 insertions, 467 deletions
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 3e047b89999e..7d2b47574504 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -954,7 +954,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (acpi_idle_suspend) return(acpi_idle_enter_c1(dev, state)); - if (acpi_idle_bm_check()) { + if (!cx->bm_sts_skip && acpi_idle_bm_check()) { if (dev->safe_state) { dev->last_state = dev->safe_state; return dev->safe_state->enter(dev, dev->safe_state); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 9ed9292f68e6..045809465347 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -80,22 +80,6 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; - -void __init acpi_set_sci_en_on_resume(void) -{ - set_sci_en_on_resume = true; -} /* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the @@ -253,11 +237,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) break; } - /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - if (set_sci_en_on_resume) - acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - else - acpi_enable(); + /* This violates the spec but is required for bug compatibility. */ + acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); @@ -346,12 +327,6 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } -static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) -{ - set_sci_en_on_resume = true; - return 0; -} - static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -370,22 +345,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacBook 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacMini 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), - }, - }, - { .callback = init_old_suspend_ordering, .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", .matches = { @@ -394,94 +353,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { - .callback = init_set_sci_en_on_resume, - .ident = "Toshiba Satellite L300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard HP G7000 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard HP Pavilion dv3 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv3 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Pavilion dv4", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Pavilion dv7", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Compaq Presario C700 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Lenovo ThinkPad T410", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Lenovo ThinkPad T510", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Lenovo ThinkPad W510", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Lenovo ThinkPad X201[s]", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"), - }, - }, - { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { @@ -490,30 +361,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), }, }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Dell Studio 1558", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1558"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Dell Studio 1557", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Dell Studio 1555", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1555"), - }, - }, {}, }; #endif /* CONFIG_SUSPEND */ diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 462200d93d71..9c6747c2c0af 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -3037,6 +3037,16 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) return -ENODEV; + /* + * For some reason, MCP89 on MacBook 7,1 doesn't work with + * ahci, use ata_generic instead. + */ + if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && + pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && + pdev->subsystem_device == 0xcb89) + return -ENODEV; + /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode. * At the moment, we can only use the AHCI mode. Let the users know * that for SAS drives they're out of luck. diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 12e26c3c68e3..151eb43b67b4 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -168,6 +168,12 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, + /* + * For some reason, MCP89 on MacBook 7,1 doesn't work with + * ahci, use ata_generic instead. + */ + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA, + PCI_VENDOR_ID_APPLE, 0xcb89, }, #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE) { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index a95024166b66..ff911aef4d7d 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -125,6 +125,17 @@ static ssize_t firmware_loading_show(struct device *dev, return sprintf(buf, "%d\n", loading); } +static void firmware_free_data(const struct firmware *fw) +{ + int i; + vunmap(fw->data); + if (fw->pages) { + for (i = 0; i < PFN_UP(fw->size); i++) + __free_page(fw->pages[i]); + kfree(fw->pages); + } +} + /* Some architectures don't have PAGE_KERNEL_RO */ #ifndef PAGE_KERNEL_RO #define PAGE_KERNEL_RO PAGE_KERNEL @@ -157,21 +168,21 @@ static ssize_t firmware_loading_store(struct device *dev, mutex_unlock(&fw_lock); break; } - vfree(fw_priv->fw->data); - fw_priv->fw->data = NULL; + firmware_free_data(fw_priv->fw); + memset(fw_priv->fw, 0, sizeof(struct firmware)); + /* If the pages are not owned by 'struct firmware' */ for (i = 0; i < fw_priv->nr_pages; i++) __free_page(fw_priv->pages[i]); kfree(fw_priv->pages); fw_priv->pages = NULL; fw_priv->page_array_size = 0; fw_priv->nr_pages = 0; - fw_priv->fw->size = 0; set_bit(FW_STATUS_LOADING, &fw_priv->status); mutex_unlock(&fw_lock); break; case 0: if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) { - vfree(fw_priv->fw->data); + vunmap(fw_priv->fw->data); fw_priv->fw->data = vmap(fw_priv->pages, fw_priv->nr_pages, 0, PAGE_KERNEL_RO); @@ -179,7 +190,10 @@ static ssize_t firmware_loading_store(struct device *dev, dev_err(dev, "%s: vmap() failed\n", __func__); goto err; } - /* Pages will be freed by vfree() */ + /* Pages are now owned by 'struct firmware' */ + fw_priv->fw->pages = fw_priv->pages; + fw_priv->pages = NULL; + fw_priv->page_array_size = 0; fw_priv->nr_pages = 0; complete(&fw_priv->completion); @@ -572,7 +586,7 @@ release_firmware(const struct firmware *fw) if (fw->data == builtin->data) goto free_fw; } - vfree(fw->data); + firmware_free_data(fw); free_fw: kfree(fw); } diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index fd50ead59c79..93f56d6ff3de 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -499,6 +499,10 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev, u8 cap_ptr; int err; + /* The Highlander principle */ + if (agp_bridges_found) + return -ENODEV; + cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); if (!cap_ptr) return -ENODEV; @@ -562,6 +566,8 @@ static void __devexit agp_amd64_remove(struct pci_dev *pdev) amd64_aperture_sizes[bridge->aperture_size_idx].size); agp_remove_bridge(bridge); agp_put_bridge(bridge); + + agp_bridges_found--; } #ifdef CONFIG_PM @@ -709,6 +715,11 @@ static struct pci_device_id agp_amd64_pci_table[] = { MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table); +static DEFINE_PCI_DEVICE_TABLE(agp_amd64_pci_promisc_table) = { + { PCI_DEVICE_CLASS(0, 0) }, + { } +}; + static struct pci_driver agp_amd64_pci_driver = { .name = "agpgart-amd64", .id_table = agp_amd64_pci_table, @@ -734,7 +745,6 @@ int __init agp_amd64_init(void) return err; if (agp_bridges_found == 0) { - struct pci_dev *dev; if (!agp_try_unsupported && !agp_try_unsupported_boot) { printk(KERN_INFO PFX "No supported AGP bridge found.\n"); #ifdef MODULE @@ -750,17 +760,10 @@ int __init agp_amd64_init(void) return -ENODEV; /* Look for any AGP bridge */ - dev = NULL; - err = -ENODEV; - for_each_pci_dev(dev) { - if (!pci_find_capability(dev, PCI_CAP_ID_AGP)) - continue; - /* Only one bridge supported right now */ - if (agp_amd64_probe(dev, NULL) == 0) { - err = 0; - break; - } - } + agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table; + err = driver_attach(&agp_amd64_pci_driver.driver); + if (err == 0 && agp_bridges_found == 0) + err = -ENODEV; } return err; } diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 8e00b4ddd083..792868d24f2a 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -224,6 +224,7 @@ struct tpm_readpubek_params_out { u8 algorithm[4]; u8 encscheme[2]; u8 sigscheme[2]; + __be32 paramsize; u8 parameters[12]; /*assuming RSA*/ __be32 keysize; u8 modulus[256]; diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 2405f17b29dd..ca15c04e5a8d 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -622,7 +622,14 @@ static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg) static int tpm_tis_pnp_resume(struct pnp_dev *dev) { - return tpm_pm_resume(&dev->dev); + struct tpm_chip *chip = pnp_get_drvdata(dev); + int ret; + + ret = tpm_pm_resume(&dev->dev); + if (!ret) + tpm_continue_selftest(chip); + + return ret; } static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = { diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 67bc2ece7b4b..295dc63256b8 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1765,17 +1765,8 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, dprintk("governor switch\n"); /* end old governor */ - if (data->governor) { - /* - * Need to release the rwsem around governor - * stop due to lock dependency between - * cancel_delayed_work_sync and the read lock - * taken in the delayed work handler. - */ - unlock_policy_rwsem_write(data->cpu); + if (data->governor) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - lock_policy_rwsem_write(data->cpu); - } /* start new governor */ data->governor = policy->governor; diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 55c9c59b3f71..d3b21a5cd5b1 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -196,7 +196,7 @@ config EDAC_I5100 config EDAC_MPC85XX tristate "Freescale MPC83xx / MPC85xx" - depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx) + depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx) help Support for error detection and correction on the Freescale MPC8349, MPC8560, MPC8540, MPC8548 diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3391e6739d06..72904c8736cd 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1958,20 +1958,20 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome) u32 value = 0; int err_sym = 0; - amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value); + if (boot_cpu_data.x86 == 0x10) { - /* F3x180[EccSymbolSize]=1, x8 symbols */ - if (boot_cpu_data.x86 == 0x10 && - boot_cpu_data.x86_model > 7 && - value & BIT(25)) { - err_sym = decode_syndrome(syndrome, x8_vectors, - ARRAY_SIZE(x8_vectors), 8); - return map_err_sym_to_channel(err_sym, 8); - } else { - err_sym = decode_syndrome(syndrome, x4_vectors, - ARRAY_SIZE(x4_vectors), 4); - return map_err_sym_to_channel(err_sym, 4); + amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value); + + /* F3x180[EccSymbolSize]=1 => x8 symbols */ + if (boot_cpu_data.x86_model > 7 && + value & BIT(25)) { + err_sym = decode_syndrome(syndrome, x8_vectors, + ARRAY_SIZE(x8_vectors), 8); + return map_err_sym_to_channel(err_sym, 8); + } } + err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), 4); + return map_err_sym_to_channel(err_sym, 4); } /* diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 930664c0a1ae..73bd7f4d5354 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -328,6 +328,7 @@ int i965_reset(struct drm_device *dev, u8 flags) } } else { DRM_ERROR("Error occurred. Don't know how to reset this chip.\n"); + mutex_unlock(&dev->struct_mutex); return -ENODEV; } diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4a44de444833..8a41c4ebd220 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2288,8 +2288,9 @@ i915_gem_object_get_pages(struct drm_gem_object *obj, mapping = inode->i_mapping; for (i = 0; i < page_count; i++) { page = read_cache_page_gfp(mapping, i, - mapping_gfp_mask (mapping) | + GFP_HIGHUSER | __GFP_COLD | + __GFP_RECLAIMABLE | gfpmask); if (IS_ERR(page)) goto err_pages; @@ -4998,6 +4999,16 @@ i915_gem_load(struct drm_device *dev) list_add(&dev_priv->mm.shrink_list, &shrink_list); spin_unlock(&shrink_list_lock); + /* On GEN3 we really need to make sure the ARB C3 LP bit is set */ + if (IS_GEN3(dev)) { + u32 tmp = I915_READ(MI_ARB_STATE); + if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) { + /* arb state is a masked write, so set bit + bit in mask */ + tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT); + I915_WRITE(MI_ARB_STATE, tmp); + } + } + /* Old X drivers will take 0-2 for front, back, depth buffers */ dev_priv->fence_reg_start = 3; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 30a2322c667c..635d349eda74 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -326,6 +326,70 @@ #define LM_BURST_LENGTH 0x00000700 #define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ +#define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */ + +/* Make render/texture TLB fetches lower priorty than associated data + * fetches. This is not turned on by default + */ +#define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15) + +/* Isoch request wait on GTT enable (Display A/B/C streams). + * Make isoch requests stall on the TLB update. May cause + * display underruns (test mode only) + */ +#define MI_ARB_ISOCH_WAIT_GTT (1 << 14) + +/* Block grant count for isoch requests when block count is + * set to a finite value. + */ +#define MI_ARB_BLOCK_GRANT_MASK (3 << 12) +#define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */ +#define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */ +#define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */ +#define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */ + +/* Enable render writes to complete in C2/C3/C4 power states. + * If this isn't enabled, render writes are prevented in low + * power states. That seems bad to me. + */ +#define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11) + +/* This acknowledges an async flip immediately instead + * of waiting for 2TLB fetches. + */ +#define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10) + +/* Enables non-sequential data reads through arbiter + */ +#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9) + +/* Disable FSB snooping of cacheable write cycles from binner/render + * command stream + */ +#define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8) + +/* Arbiter time slice for non-isoch streams */ +#define MI_ARB_TIME_SLICE_MASK (7 << 5) +#define MI_ARB_TIME_SLICE_1 (0 << 5) +#define MI_ARB_TIME_SLICE_2 (1 << 5) +#define MI_ARB_TIME_SLICE_4 (2 << 5) +#define MI_ARB_TIME_SLICE_6 (3 << 5) +#define MI_ARB_TIME_SLICE_8 (4 << 5) +#define MI_ARB_TIME_SLICE_10 (5 << 5) +#define MI_ARB_TIME_SLICE_14 (6 << 5) +#define MI_ARB_TIME_SLICE_16 (7 << 5) + +/* Low priority grace period page size */ +#define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */ +#define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4) + +/* Disable display A/B trickle feed */ +#define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2) + +/* Set display plane priority */ +#define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */ +#define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ + #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_MASK_SHIFT 16 #define CM0_IZ_OPT_DISABLE (1<<6) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3f009022d154..d63173af4e9a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -879,8 +879,8 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, intel_clock_t clock; int max_n; bool found; - /* approximately equals target * 0.00488 */ - int err_most = (target >> 8) + (target >> 10); + /* approximately equals target * 0.00585 */ + int err_most = (target >> 8) + (target >> 9); found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c0d4650cdb79..3ecd23608416 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1384,6 +1384,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p, case RADEON_TXFORMAT_RGB332: case RADEON_TXFORMAT_Y8: track->textures[i].cpp = 1; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case RADEON_TXFORMAT_AI88: case RADEON_TXFORMAT_ARGB1555: @@ -1395,12 +1396,14 @@ static int r100_packet0_check(struct radeon_cs_parser *p, case RADEON_TXFORMAT_LDUDV655: case RADEON_TXFORMAT_DUDV88: track->textures[i].cpp = 2; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case RADEON_TXFORMAT_ARGB8888: case RADEON_TXFORMAT_RGBA8888: case RADEON_TXFORMAT_SHADOW32: case RADEON_TXFORMAT_LDUDUV8888: track->textures[i].cpp = 4; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case RADEON_TXFORMAT_DXT1: track->textures[i].cpp = 1; @@ -2750,33 +2753,6 @@ static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t) DRM_ERROR("compress format %d\n", t->compress_format); } -static int r100_cs_track_cube(struct radeon_device *rdev, - struct r100_cs_track *track, unsigned idx) -{ - unsigned face, w, h; - struct radeon_bo *cube_robj; - unsigned long size; - - for (face = 0; face < 5; face++) { - cube_robj = track->textures[idx].cube_info[face].robj; - w = track->textures[idx].cube_info[face].width; - h = track->textures[idx].cube_info[face].height; - - size = w * h; - size *= track->textures[idx].cpp; - - size += track->textures[idx].cube_info[face].offset; - - if (size > radeon_bo_size(cube_robj)) { - DRM_ERROR("Cube texture offset greater than object size %lu %lu\n", - size, radeon_bo_size(cube_robj)); - r100_cs_track_texture_print(&track->textures[idx]); - return -1; - } - } - return 0; -} - static int r100_track_compress_size(int compress_format, int w, int h) { int block_width, block_height, block_bytes; @@ -2807,6 +2783,37 @@ static int r100_track_compress_size(int compress_format, int w, int h) return sz; } +static int r100_cs_track_cube(struct radeon_device *rdev, + struct r100_cs_track *track, unsigned idx) +{ + unsigned face, w, h; + struct radeon_bo *cube_robj; + unsigned long size; + unsigned compress_format = track->textures[idx].compress_format; + + for (face = 0; face < 5; face++) { + cube_robj = track->textures[idx].cube_info[face].robj; + w = track->textures[idx].cube_info[face].width; + h = track->textures[idx].cube_info[face].height; + + if (compress_format) { + size = r100_track_compress_size(compress_format, w, h); + } else + size = w * h; + size *= track->textures[idx].cpp; + + size += track->textures[idx].cube_info[face].offset; + + if (size > radeon_bo_size(cube_robj)) { + DRM_ERROR("Cube texture offset greater than object size %lu %lu\n", + size, radeon_bo_size(cube_robj)); + r100_cs_track_texture_print(&track->textures[idx]); + return -1; + } + } + return 0; +} + static int r100_cs_track_texture_check(struct radeon_device *rdev, struct r100_cs_track *track) { diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c index ff1e0cd608bf..f890fd3ec909 100644 --- a/drivers/gpu/drm/radeon/r200.c +++ b/drivers/gpu/drm/radeon/r200.c @@ -368,6 +368,8 @@ int r200_packet0_check(struct radeon_cs_parser *p, /* 2D, 3D, CUBE */ switch (tmp) { case 0: + case 3: + case 4: case 5: case 6: case 7: @@ -403,6 +405,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_TXFORMAT_RGB332: case R200_TXFORMAT_Y8: track->textures[i].cpp = 1; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R200_TXFORMAT_AI88: case R200_TXFORMAT_ARGB1555: @@ -414,6 +417,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_TXFORMAT_DVDU88: case R200_TXFORMAT_AVYU4444: track->textures[i].cpp = 2; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R200_TXFORMAT_ARGB8888: case R200_TXFORMAT_RGBA8888: @@ -421,6 +425,7 @@ int r200_packet0_check(struct radeon_cs_parser *p, case R200_TXFORMAT_BGR111110: case R200_TXFORMAT_LDVDU8888: track->textures[i].cpp = 4; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R200_TXFORMAT_DXT1: track->textures[i].cpp = 1; diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 5bdfaf2780d8..7e9868d564f7 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -870,6 +870,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case R300_TX_FORMAT_Y4X4: case R300_TX_FORMAT_Z3Y3X2: track->textures[i].cpp = 1; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R300_TX_FORMAT_X16: case R300_TX_FORMAT_Y8X8: @@ -881,6 +882,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case R300_TX_FORMAT_B8G8_B8G8: case R300_TX_FORMAT_G8R8_G8B8: track->textures[i].cpp = 2; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R300_TX_FORMAT_Y16X16: case R300_TX_FORMAT_Z11Y11X10: @@ -891,14 +893,17 @@ static int r300_packet0_check(struct radeon_cs_parser *p, case R300_TX_FORMAT_FL_I32: case 0x1e: track->textures[i].cpp = 4; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R300_TX_FORMAT_W16Z16Y16X16: case R300_TX_FORMAT_FL_R16G16B16A16: case R300_TX_FORMAT_FL_I32A32: track->textures[i].cpp = 8; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R300_TX_FORMAT_FL_R32G32B32A32: track->textures[i].cpp = 16; + track->textures[i].compress_format = R100_TRACK_COMP_NONE; break; case R300_TX_FORMAT_DXT1: track->textures[i].cpp = 1; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index ff02664cb39e..e249933ffecd 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -268,6 +268,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, } } + /* ASUS HD 3600 board lists the DVI port as HDMI */ + if ((dev->pdev->device == 0x9598) && + (dev->pdev->subsystem_vendor == 0x1043) && + (dev->pdev->subsystem_device == 0x01e4)) { + if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) { + *connector_type = DRM_MODE_CONNECTOR_DVII; + } + } + /* ASUS HD 3450 board lists the DVI port as HDMI */ if ((dev->pdev->device == 0x95C5) && (dev->pdev->subsystem_vendor == 0x1043) && @@ -977,8 +986,15 @@ bool radeon_atombios_sideport_present(struct radeon_device *rdev) if (igp_info) { switch (crev) { case 1: - if (igp_info->info.ucMemoryType & 0xf0) - return true; + /* AMD IGPS */ + if ((rdev->family == CHIP_RS690) || + (rdev->family == CHIP_RS740)) { + if (igp_info->info.ulBootUpMemoryClock) + return true; + } else { + if (igp_info->info.ucMemoryType & 0xf0) + return true; + } break; case 2: if (igp_info->info_2.ucMemoryType & 0x0f) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 2bdfbcd6d0e6..c263f8e8fdc0 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -779,30 +779,27 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else ret = connector_status_connected; - /* multiple connectors on the same encoder with the same ddc line - * This tends to be HDMI and DVI on the same encoder with the - * same ddc line. If the edid says HDMI, consider the HDMI port - * connected and the DVI port disconnected. If the edid doesn't - * say HDMI, vice versa. + /* This gets complicated. We have boards with VGA + HDMI with a + * shared DDC line and we have boards with DVI-D + HDMI with a shared + * DDC line. The latter is more complex because with DVI<->HDMI adapters + * you don't really know what's connected to which port as both are digital. */ if (radeon_connector->shared_ddc && (ret == connector_status_connected)) { struct drm_device *dev = connector->dev; + struct radeon_device *rdev = dev->dev_private; struct drm_connector *list_connector; struct radeon_connector *list_radeon_connector; list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) { if (connector == list_connector) continue; list_radeon_connector = to_radeon_connector(list_connector); - if (radeon_connector->devices == list_radeon_connector->devices) { - if (drm_detect_hdmi_monitor(radeon_connector->edid)) { - if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) { - kfree(radeon_connector->edid); - radeon_connector->edid = NULL; - ret = connector_status_disconnected; - } - } else { - if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) || - (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) { + if (list_radeon_connector->shared_ddc && + (list_radeon_connector->ddc_bus->rec.i2c_id == + radeon_connector->ddc_bus->rec.i2c_id)) { + /* cases where both connectors are digital */ + if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) { + /* hpd is our only option in this case */ + if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) { kfree(radeon_connector->edid); radeon_connector->edid = NULL; ret = connector_status_disconnected; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 38e45e231ef5..5c2672f5375b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -108,6 +108,7 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) udelay(panel_pwr_delay * 1000); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); + udelay(panel_pwr_delay * 1000); break; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c index f2ed27c8055b..032040397743 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c @@ -642,8 +642,8 @@ void radeon_legacy_tv_mode_set(struct drm_encoder *encoder, } flicker_removal = (tmp + 500) / 1000; - if (flicker_removal < 2) - flicker_removal = 2; + if (flicker_removal < 3) + flicker_removal = 3; for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) { if (flicker_removal == SLOPE_limit[i]) break; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 2988da150ed6..05344af50734 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -53,6 +53,7 @@ struct coretemp_data { struct mutex update_lock; const char *name; u32 id; + u16 core_id; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int temp; @@ -75,7 +76,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute if (attr->index == SHOW_NAME) ret = sprintf(buf, "%s\n", data->name); else /* show label */ - ret = sprintf(buf, "Core %d\n", data->id); + ret = sprintf(buf, "Core %d\n", data->core_id); return ret; } @@ -304,6 +305,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev) } data->id = pdev->id; +#ifdef CONFIG_SMP + data->core_id = c->cpu_core_id; +#endif data->name = "coretemp"; mutex_init(&data->update_lock); @@ -405,6 +409,10 @@ struct pdev_entry { struct list_head list; struct platform_device *pdev; unsigned int cpu; +#ifdef CONFIG_SMP + u16 phys_proc_id; + u16 cpu_core_id; +#endif }; static LIST_HEAD(pdev_list); @@ -415,6 +423,22 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) int err; struct platform_device *pdev; struct pdev_entry *pdev_entry; +#ifdef CONFIG_SMP + struct cpuinfo_x86 *c = &cpu_data(cpu); +#endif + + mutex_lock(&pdev_list_mutex); + +#ifdef CONFIG_SMP + /* Skip second HT entry of each core */ + list_for_each_entry(pdev_entry, &pdev_list, list) { + if (c->phys_proc_id == pdev_entry->phys_proc_id && + c->cpu_core_id == pdev_entry->cpu_core_id) { + err = 0; /* Not an error */ + goto exit; + } + } +#endif pdev = platform_device_alloc(DRVNAME, cpu); if (!pdev) { @@ -438,7 +462,10 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) pdev_entry->pdev = pdev; pdev_entry->cpu = cpu; - mutex_lock(&pdev_list_mutex); +#ifdef CONFIG_SMP + pdev_entry->phys_proc_id = c->phys_proc_id; + pdev_entry->cpu_core_id = c->cpu_core_id; +#endif list_add_tail(&pdev_entry->list, &pdev_list); mutex_unlock(&pdev_list_mutex); @@ -449,6 +476,7 @@ exit_device_free: exit_device_put: platform_device_put(pdev); exit: + mutex_unlock(&pdev_list_mutex); return err; } diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 0ffe84d190bb..ec7e8a0b0648 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -80,6 +80,13 @@ superio_inb(int reg) return inb(VAL); } +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + static int superio_inw(int reg) { int val; @@ -1064,6 +1071,21 @@ static int __init it87_find(unsigned short *address, sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); + /* + * The IT8720F has no VIN7 pin, so VCCH should always be + * routed internally to VIN7 with an internal divider. + * Curiously, there still is a configuration bit to control + * this, which means it can be set incorrectly. And even + * more curiously, many boards out there are improperly + * configured, even though the IT8720F datasheet claims + * that the internal routing of VCCH to VIN7 is the default + * setting. So we force the internal routing in this case. + */ + if (sio_data->type == it8720 && !(reg & (1 << 1))) { + reg |= (1 << 1); + superio_outb(IT87_SIO_PINX2_REG, reg); + pr_notice("it87: Routing internal VCCH to in7\n"); + } if (reg & (1 << 0)) pr_info("it87: in3 is VCC (+5V)\n"); if (reg & (1 << 1)) diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 099a2138cdf6..da5a2404cd3e 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -112,11 +112,21 @@ static bool __devinit has_erratum_319(struct pci_dev *pdev) if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3) return false; - /* Differentiate between AM2+ (bad) and AM3 (good) */ + /* DDR3 memory implies socket AM3, which is good */ pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 2), REG_DCT0_CONFIG_HIGH, ®_dram_cfg); - return !(reg_dram_cfg & DDR3_MODE); + if (reg_dram_cfg & DDR3_MODE) + return false; + + /* + * Unfortunately it is possible to run a socket AM3 CPU with DDR2 + * memory. We blacklist all the cores which do exist in socket AM2+ + * format. It still isn't perfect, as RB-C2 cores exist in both AM2+ + * and AM3 formats, but that's the best we can do. + */ + return boot_cpu_data.x86_model < 4 || + (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2); } static int __devinit k10temp_probe(struct pci_dev *pdev, diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c index 0ceb6d6200a3..8bdf80d91598 100644 --- a/drivers/hwmon/k8temp.c +++ b/drivers/hwmon/k8temp.c @@ -120,7 +120,7 @@ static ssize_t show_temp(struct device *dev, int temp; struct k8temp_data *data = k8temp_update_device(dev); - if (data->swap_core_select) + if (data->swap_core_select && (data->sensorsp & SEL_CORE)) core = core ? 0 : 1; temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset; @@ -180,11 +180,13 @@ static int __devinit k8temp_probe(struct pci_dev *pdev, } if ((model >= 0x69) && - !(model == 0xc1 || model == 0x6c || model == 0x7c)) { + !(model == 0xc1 || model == 0x6c || model == 0x7c || + model == 0x6b || model == 0x6f || model == 0x7f)) { /* - * RevG desktop CPUs (i.e. no socket S1G1 parts) - * need additional offset, otherwise reported - * temperature is below ambient temperature + * RevG desktop CPUs (i.e. no socket S1G1 or + * ASB1 parts) need additional offset, + * otherwise reported temperature is below + * ambient temperature */ data->temp_offset = 21000; } diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index 1a32d62ed86b..a9c331301237 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -632,12 +632,10 @@ static void cmd640_init_dev(ide_drive_t *drive) static int cmd640_test_irq(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); int irq_reg = hwif->channel ? ARTTIM23 : CFR; - u8 irq_stat, irq_mask = hwif->channel ? ARTTIM23_IDE23INTR : + u8 irq_mask = hwif->channel ? ARTTIM23_IDE23INTR : CFR_IDE01INTR; - - pci_read_config_byte(dev, irq_reg, &irq_stat); + u8 irq_stat = get_cmd640_reg(irq_reg); return (irq_stat & irq_mask) ? 1 : 0; } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7253867ecb3f..8fb6962b073e 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -428,13 +428,11 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, { struct request *rq; int error; + int rw = !(cmd->tf_flags & IDE_TFLAG_WRITE) ? READ : WRITE; - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq = blk_get_request(drive->queue, rw, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; - /* * (ks) We transfer currently only whole sectors. * This is suffient for now. But, it would be great, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index df3eb8c9fd96..b4b22576f12a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1163,7 +1163,7 @@ static ssize_t create_child(struct device *dev, return ret ? ret : count; } -static DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child); +static DEVICE_ATTR(create_child, S_IWUSR, NULL, create_child); static ssize_t delete_child(struct device *dev, struct device_attribute *attr, @@ -1183,7 +1183,7 @@ static ssize_t delete_child(struct device *dev, return ret ? ret : count; } -static DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child); +static DEVICE_ATTR(delete_child, S_IWUSR, NULL, delete_child); int ipoib_add_pkey_attr(struct net_device *dev) { diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 21d6184efa96..7fa439bcb728 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -50,8 +50,12 @@ */ #define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */ #define TWL4030_MAX_COLS 8 -#define TWL4030_ROW_SHIFT 3 -#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS) +/* + * Note that we add space for an extra column so that we can handle + * row lines connected to the gnd (see twl4030_col_xlate()). + */ +#define TWL4030_ROW_SHIFT 4 +#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT) struct twl4030_keypad { unsigned short keymap[TWL4030_KEYMAP_SIZE]; @@ -181,7 +185,7 @@ static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state) return ret; } -static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) +static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) { int i; u16 check = 0; @@ -190,12 +194,12 @@ static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) u16 col = key_state[i]; if ((col & check) && hweight16(col) > 1) - return 1; + return true; check |= col; } - return 0; + return false; } static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) @@ -224,7 +228,8 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) if (!changed) continue; - for (col = 0; col < kp->n_cols; col++) { + /* Extra column handles "all gnd" rows */ + for (col = 0; col < kp->n_cols + 1; col++) { int code; if (!(changed & (1 << col))) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 525b9b936ff5..ba09e4dd8492 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -166,6 +166,13 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { }, }, { + /* Gigabyte Spring Peak - defines wrong chassis type */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"), + }, + }, + { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 5fb1ad68b7e9..da90f45f1a7e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1486,14 +1486,14 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) int sectors = r10_bio->sectors; mdk_rdev_t*rdev; int max_read_errors = atomic_read(&mddev->max_corr_read_errors); + int d = r10_bio->devs[r10_bio->read_slot].devnum; rcu_read_lock(); - { - int d = r10_bio->devs[r10_bio->read_slot].devnum; + rdev = rcu_dereference(conf->mirrors[d].rdev); + if (rdev) { /* If rdev is not NULL */ char b[BDEVNAME_SIZE]; int cur_read_error_count = 0; - rdev = rcu_dereference(conf->mirrors[d].rdev); bdevname(rdev->bdev, b); if (test_bit(Faulty, &rdev->flags)) { @@ -1533,7 +1533,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) rcu_read_lock(); do { - int d = r10_bio->devs[sl].devnum; + d = r10_bio->devs[sl].devnum; rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev && test_bit(In_sync, &rdev->flags)) { @@ -1567,7 +1567,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) rcu_read_lock(); while (sl != r10_bio->read_slot) { char b[BDEVNAME_SIZE]; - int d; + if (sl==0) sl = conf->copies; sl--; @@ -1603,7 +1603,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) } sl = start; while (sl != r10_bio->read_slot) { - int d; + if (sl==0) sl = conf->copies; sl--; diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index b11533f76195..00ddf9259e31 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -350,6 +350,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) const u8 *ts, *ts_end, *from_where = NULL; u8 ts_remain = 0, how_much = 0, new_ts = 1; struct ethhdr *ethh = NULL; + bool error = false; #ifdef ULE_DEBUG /* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */ @@ -459,10 +460,16 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Drop partly decoded SNDU, reset state, resync on PUSI. */ if (priv->ule_skb) { - dev_kfree_skb( priv->ule_skb ); + error = true; + dev_kfree_skb(priv->ule_skb); + } + + if (error || priv->ule_sndu_remain) { dev->stats.rx_errors++; dev->stats.rx_frame_errors++; + error = false; } + reset_ule(priv); priv->need_pusi = 1; continue; @@ -534,6 +541,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) from_where += 2; } + priv->ule_sndu_remain = priv->ule_sndu_len + 2; /* * State of current TS: * ts_remain (remaining bytes in the current TS cell) @@ -543,6 +551,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) */ switch (ts_remain) { case 1: + priv->ule_sndu_remain--; priv->ule_sndu_type = from_where[0] << 8; priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */ ts_remain -= 1; from_where += 1; @@ -556,6 +565,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) default: /* complete ULE header is present in current TS. */ /* Extract ULE type field. */ if (priv->ule_sndu_type_1) { + priv->ule_sndu_type_1 = 0; priv->ule_sndu_type |= from_where[0]; from_where += 1; /* points to payload start. */ ts_remain -= 1; diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index d8d4214fd65f..32a7ec65ec42 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -68,13 +68,14 @@ config DVB_BUDGET select DVB_VES1820 if !DVB_FE_CUSTOMISE select DVB_L64781 if !DVB_FE_CUSTOMISE select DVB_TDA8083 if !DVB_FE_CUSTOMISE - select DVB_TDA10021 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE select DVB_S5H1420 if !DVB_FE_CUSTOMISE select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE + select DVB_ISL6423 if !DVB_FE_CUSTOMISE + select DVB_STV090x if !DVB_FE_CUSTOMISE + select DVB_STV6110x if !DVB_FE_CUSTOMISE help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard MPEG2 decoder, and without diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 4172cb387420..d4746e064516 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -365,7 +365,17 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) memset(&info, 0, sizeof(struct i2c_board_info)); strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - i2c_new_probed_device(&bus->i2c_adap, &info, addr_list); + /* + * We can't call i2c_new_probed_device() because it uses + * quick writes for probing and the IR receiver device only + * replies to reads. + */ + if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0, + I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK, + NULL) >= 0) { + info.addr = addr_list[0]; + i2c_new_device(&bus->i2c_adap, &info); + } } return bus->i2c_rc; diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index ee1ca39db06a..fb39f1184558 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -188,10 +188,24 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) 0x18, 0x6b, 0x71, I2C_CLIENT_END }; + const unsigned short *addrp; memset(&info, 0, sizeof(struct i2c_board_info)); strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - i2c_new_probed_device(&core->i2c_adap, &info, addr_list); + /* + * We can't call i2c_new_probed_device() because it uses + * quick writes for probing and at least some R receiver + * devices only reply to reads. + */ + for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) { + if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0, + I2C_SMBUS_READ, 0, + I2C_SMBUS_QUICK, NULL) >= 0) { + info.addr = *addrp; + i2c_new_device(&core->i2c_adap, &info); + break; + } + } } return core->i2c_rc; } diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 391cccca7ffc..b42e8458a807 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -59,6 +59,11 @@ static struct uvc_format_desc uvc_fmts[] = { .fcc = V4L2_PIX_FMT_YUYV, }, { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2_ISIGHT, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { .name = "YUV 4:2:0 (NV12)", .guid = UVC_GUID_FORMAT_NV12, .fcc = V4L2_PIX_FMT_NV12, @@ -84,11 +89,16 @@ static struct uvc_format_desc uvc_fmts[] = { .fcc = V4L2_PIX_FMT_UYVY, }, { - .name = "Greyscale", + .name = "Greyscale (8-bit)", .guid = UVC_GUID_FORMAT_Y800, .fcc = V4L2_PIX_FMT_GREY, }, { + .name = "Greyscale (16-bit)", + .guid = UVC_GUID_FORMAT_Y16, + .fcc = V4L2_PIX_FMT_Y16, + }, + { .name = "RGB Bayer", .guid = UVC_GUID_FORMAT_BY8, .fcc = V4L2_PIX_FMT_SBGGR8, @@ -2059,6 +2069,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Syntek (Packard Bell EasyNote MX52 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x8a12, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* Syntek (Asus F9SG) */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -2123,6 +2142,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Arkmicro unbranded */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18ec, + .idProduct = 0x3290, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_DEF }, /* Bodelin ProScopeHR */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_HI diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 2337585001ea..b6f6f3851640 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -113,6 +113,9 @@ struct uvc_xu_control { #define UVC_GUID_FORMAT_YUY2 \ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2_ISIGHT \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71} #define UVC_GUID_FORMAT_NV12 \ { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} @@ -128,11 +131,13 @@ struct uvc_xu_control { #define UVC_GUID_FORMAT_Y800 \ { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y16 \ + { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} #define UVC_GUID_FORMAT_BY8 \ { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} - /* ------------------------------------------------------------------------ * Driver specific constants. */ diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 50997d2a63e7..676cd0c327f5 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -372,6 +372,26 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) static int __devexit sdhci_s3c_remove(struct platform_device *pdev) { + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_s3c *sc = sdhci_priv(host); + int ptr; + + sdhci_remove_host(host, 1); + + for (ptr = 0; ptr < 3; ptr++) { + clk_disable(sc->clk_bus[ptr]); + clk_put(sc->clk_bus[ptr]); + } + clk_disable(sc->clk_io); + clk_put(sc->clk_io); + + iounmap(host->ioaddr); + release_resource(sc->ioarea); + kfree(sc->ioarea); + + sdhci_free_host(host); + platform_set_drvdata(pdev, NULL); + return 0; } diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index 66e0323c1839..b74a0eadbd6c 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -380,6 +380,12 @@ out: return retval; } +static irqreturn_t el2_probe_interrupt(int irq, void *seen) +{ + *(bool *)seen = true; + return IRQ_HANDLED; +} + static int el2_open(struct net_device *dev) { @@ -391,23 +397,35 @@ el2_open(struct net_device *dev) outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ do { - retval = request_irq(*irqp, NULL, 0, "bogus", dev); - if (retval >= 0) { + bool seen; + + retval = request_irq(*irqp, el2_probe_interrupt, 0, + dev->name, &seen); + if (retval == -EBUSY) + continue; + if (retval < 0) + goto err_disable; + /* Twinkle the interrupt, and check if it's seen. */ - unsigned long cookie = probe_irq_on(); + seen = false; + smp_wmb(); outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); outb_p(0x00, E33G_IDCFR); - if (*irqp == probe_irq_off(cookie) && /* It's a good IRQ line! */ - ((retval = request_irq(dev->irq = *irqp, - eip_interrupt, 0, - dev->name, dev)) == 0)) - break; - } else { - if (retval != -EBUSY) - return retval; - } + msleep(1); + free_irq(*irqp, el2_probe_interrupt); + if (!seen) + continue; + + retval = request_irq(dev->irq = *irqp, eip_interrupt, 0, + dev->name, dev); + if (retval == -EBUSY) + continue; + if (retval < 0) + goto err_disable; } while (*++irqp); + if (*irqp == 0) { + err_disable: outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ return -EAGAIN; } diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 8d0be26f94e3..6e739bbecd00 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -1174,7 +1174,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) if (netif_msg_drv(priv)) printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(priv->phy); + rc = PTR_ERR(priv->phy); + goto fail; } if ((rc = register_netdev(dev))) { diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c index 5248f9e0b2f4..35cd36729155 100644 --- a/drivers/net/cxgb3/ael1002.c +++ b/drivers/net/cxgb3/ael1002.c @@ -934,7 +934,7 @@ static struct cphy_ops xaui_direct_ops = { int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, MDIO_PRTAD_NONE, &xaui_direct_ops, mdio_ops, + cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops, SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP, "10GBASE-CX4"); return 0; diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index b37730065688..55cab1dc1732 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -475,17 +475,13 @@ static uint32_t dm9000_get_rx_csum(struct net_device *dev) return dm->rx_csum; } -static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data) +static int dm9000_set_rx_csum_unlocked(struct net_device *dev, uint32_t data) { board_info_t *dm = to_dm9000_board(dev); - unsigned long flags; if (dm->can_csum) { dm->rx_csum = data; - - spin_lock_irqsave(&dm->lock, flags); iow(dm, DM9000_RCSR, dm->rx_csum ? RCSR_CSUM : 0); - spin_unlock_irqrestore(&dm->lock, flags); return 0; } @@ -493,6 +489,19 @@ static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data) return -EOPNOTSUPP; } +static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data) +{ + board_info_t *dm = to_dm9000_board(dev); + unsigned long flags; + int ret; + + spin_lock_irqsave(&dm->lock, flags); + ret = dm9000_set_rx_csum_unlocked(dev, data); + spin_unlock_irqrestore(&dm->lock, flags); + + return ret; +} + static int dm9000_set_tx_csum(struct net_device *dev, uint32_t data) { board_info_t *dm = to_dm9000_board(dev); @@ -721,7 +730,7 @@ static unsigned char dm9000_type_to_char(enum dm9000_type type) * Set DM9000 multicast address */ static void -dm9000_hash_table(struct net_device *dev) +dm9000_hash_table_unlocked(struct net_device *dev) { board_info_t *db = netdev_priv(dev); struct dev_mc_list *mcptr = dev->mc_list; @@ -730,12 +739,9 @@ dm9000_hash_table(struct net_device *dev) u32 hash_val; u16 hash_table[4]; u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN; - unsigned long flags; dm9000_dbg(db, 1, "entering %s\n", __func__); - spin_lock_irqsave(&db->lock, flags); - for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++) iow(db, oft, dev->dev_addr[i]); @@ -765,6 +771,16 @@ dm9000_hash_table(struct net_device *dev) } iow(db, DM9000_RCR, rcr); +} + +static void +dm9000_hash_table(struct net_device *dev) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&db->lock, flags); + dm9000_hash_table_unlocked(dev); spin_unlock_irqrestore(&db->lock, flags); } @@ -784,7 +800,7 @@ dm9000_init_dm9000(struct net_device *dev) db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ /* Checksum mode */ - dm9000_set_rx_csum(dev, db->rx_csum); + dm9000_set_rx_csum_unlocked(dev, db->rx_csum); /* GPIO0 on pre-activate PHY */ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ @@ -811,7 +827,7 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */ /* Set address filter table */ - dm9000_hash_table(dev); + dm9000_hash_table_unlocked(dev); imr = IMR_PAR | IMR_PTM | IMR_PRM; if (db->type != TYPE_DM9000E) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 3c340489804a..a7b5a8229eda 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5900,7 +5900,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i /* Limit the number of tx's outstanding for hw bug */ if (id->driver_data & DEV_NEED_TX_LIMIT) { np->tx_limit = 1; - if ((id->driver_data & DEV_NEED_TX_LIMIT2) && + if (((id->driver_data & DEV_NEED_TX_LIMIT2) == DEV_NEED_TX_LIMIT2) && pci_dev->revision >= 0xA2) np->tx_limit = 0; } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 787befc65322..69f84c8e5cb0 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -557,6 +557,11 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value) break; udelay(25); } + /* + * According to hardware specs a 20us delay is required after write + * complete indication, but before sending next command. + */ + udelay(20); } static int mdio_read(void __iomem *ioaddr, int reg_addr) @@ -576,6 +581,12 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr) } udelay(25); } + /* + * According to hardware specs a 20us delay is required after read + * complete indication, but before sending next command. + */ + udelay(20); + return value; } diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 67249c3c9f50..5520f161d76f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -716,11 +716,24 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } +/* Enable Rx/Tx */ +static void sky2_enable_rx_tx(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + reg = gma_read16(hw, port, GM_GP_CTRL); + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + gma_write16(hw, port, GM_GP_CTRL, reg); +} + /* Force a renegotiation */ static void sky2_phy_reinit(struct sky2_port *sky2) { spin_lock_bh(&sky2->phy_lock); sky2_phy_init(sky2->hw, sky2->port); + sky2_enable_rx_tx(sky2); spin_unlock_bh(&sky2->phy_lock); } @@ -1971,7 +1984,6 @@ static void sky2_link_up(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u16 reg; static const char *fc_name[] = { [FC_NONE] = "none", [FC_TX] = "tx", @@ -1979,10 +1991,7 @@ static void sky2_link_up(struct sky2_port *sky2) [FC_BOTH] = "both", }; - /* enable Rx/Tx */ - reg = gma_read16(hw, port, GM_GP_CTRL); - reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; - gma_write16(hw, port, GM_GP_CTRL, reg); + sky2_enable_rx_tx(sky2); gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h index 5d02f0200737..7d07037554b0 100644 --- a/drivers/net/usb/pegasus.h +++ b/drivers/net/usb/pegasus.h @@ -254,7 +254,7 @@ PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a, +PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, DEFAULT_GPIO_RESET) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 3a15de56df9c..baf0b514092d 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -186,7 +186,6 @@ tx_drop: return NETDEV_TX_OK; rx_drop: - kfree_skb(skb); rcv_stats->rx_dropped++; return NETDEV_TX_OK; } diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index 42284445b75e..6b00074528e7 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -123,6 +123,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_cw_min = AR5K_TUNE_CWMIN; ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; ah->ah_software_retry = false; + ah->ah_current_channel = &sc->channels[0]; /* * Find the mac version diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index d3778093d1bc..e6e9587cb484 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1851,11 +1851,6 @@ ath5k_tasklet_rx(unsigned long data) return; } - if (unlikely(rs.rs_more)) { - ATH5K_WARN(sc, "unsupported jumbo\n"); - goto next; - } - if (unlikely(rs.rs_status)) { if (rs.rs_status & AR5K_RXERR_PHY) goto next; @@ -1885,6 +1880,8 @@ ath5k_tasklet_rx(unsigned long data) sc->opmode != NL80211_IFTYPE_MONITOR) goto next; } + if (unlikely(rs.rs_more)) + goto next; accept: next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr); diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h index 8a3bf3ab998d..7203f00e4689 100644 --- a/drivers/net/wireless/ath/ath9k/initvals.h +++ b/drivers/net/wireless/ath/ath9k/initvals.h @@ -246,7 +246,7 @@ static const u32 ar5416Common[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8000010 }, + { 0x00008264, 0x88000010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -2766,7 +2766,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -3936,7 +3936,7 @@ static const u_int32_t ar9285Common_9285[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -5073,7 +5073,7 @@ static const u_int32_t ar9287Common_9287_1_0[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index c9640a3e02c9..b2db9029161b 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -602,6 +602,7 @@ static int prism2_config(struct pcmcia_device *link) local_info_t *local; int ret = 1; struct hostap_cs_priv *hw_priv; + unsigned long flags; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); @@ -636,6 +637,12 @@ static int prism2_config(struct pcmcia_device *link) link->dev_node = &hw_priv->node; /* + * Make sure the IRQ handler cannot proceed until at least + * dev->base_addr is initialized. + */ + spin_lock_irqsave(&local->irq_init_lock, flags); + + /* * Allocate an interrupt line. Note that this does not assign a * handler to the interrupt, unless the 'Handler' member of the * irq structure is initialized. @@ -645,7 +652,7 @@ static int prism2_config(struct pcmcia_device *link) link->irq.Handler = prism2_interrupt; ret = pcmcia_request_irq(link, &link->irq); if (ret) - goto failed; + goto failed_unlock; } /* @@ -655,11 +662,13 @@ static int prism2_config(struct pcmcia_device *link) */ ret = pcmcia_request_configuration(link, &link->conf); if (ret) - goto failed; + goto failed_unlock; dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; + spin_unlock_irqrestore(&local->irq_init_lock, flags); + /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", dev_info, link->conf.ConfigIndex); @@ -688,6 +697,8 @@ static int prism2_config(struct pcmcia_device *link) } return ret; + failed_unlock: + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index ff9b5c882184..2f999fc94f60 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2621,6 +2621,18 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) iface = netdev_priv(dev); local = iface->local; + /* Detect early interrupt before driver is fully configued */ + spin_lock(&local->irq_init_lock); + if (!dev->base_addr) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", + dev->name); + } + spin_unlock(&local->irq_init_lock); + return IRQ_HANDLED; + } + spin_unlock(&local->irq_init_lock); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); if (local->func->card_present && !local->func->card_present(local)) { @@ -3138,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, spin_lock_init(&local->cmdlock); spin_lock_init(&local->baplock); spin_lock_init(&local->lock); + spin_lock_init(&local->irq_init_lock); mutex_init(&local->rid_bap_mtx); if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index 3d238917af07..1ba33be98b25 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -654,7 +654,7 @@ struct local_info { rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock * when removing entries from the list. * TX and RX paths can use read lock. */ - spinlock_t cmdlock, baplock, lock; + spinlock_t cmdlock, baplock, lock, irq_init_lock; struct mutex rid_bap_mtx; u16 infofid; /* MAC buffer id for info frame */ /* txfid, intransmitfid, next_txtid, and next_alloc are protected by diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 8f1b8509cd66..8bc21052c52a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -812,6 +812,7 @@ void iwl_bg_abort_scan(struct work_struct *work) mutex_lock(&priv->mutex); + cancel_delayed_work_sync(&priv->scan_check); set_bit(STATUS_SCAN_ABORTING, &priv->status); iwl_send_scan_abort(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index e0ce039d9300..2f531210b581 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1553,6 +1553,11 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, sta_id = ba_resp->sta_id; tid = ba_resp->tid; agg = &priv->stations[sta_id].tid[tid].agg; + if (unlikely(agg->txq_id != scd_flow)) { + IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n", + scd_flow, agg->txq_id); + return; + } /* Find index just before block-ack window */ index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 7a73f625273b..33206a98a572 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -34,6 +34,8 @@ #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/host.h> #include "host.h" #include "decl.h" @@ -942,6 +944,7 @@ static int if_sdio_probe(struct sdio_func *func, int ret, i; unsigned int model; struct if_sdio_packet *packet; + struct mmc_host *host = func->card->host; lbs_deb_enter(LBS_DEB_SDIO); @@ -1022,6 +1025,25 @@ static int if_sdio_probe(struct sdio_func *func, if (ret) goto disable; + /* For 1-bit transfers to the 8686 model, we need to enable the + * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 + * bit to allow access to non-vendor registers. */ + if ((card->model == IF_SDIO_MODEL_8686) && + (host->caps & MMC_CAP_SDIO_IRQ) && + (host->ios.bus_width == MMC_BUS_WIDTH_1)) { + u8 reg; + + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret); + if (ret) + goto release_int; + + reg |= SDIO_BUS_ECSI; + sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret); + if (ret) + goto release_int; + } + card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); if (ret) goto release_int; diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 41d33cde97c0..7ff033e124ae 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -40,6 +40,8 @@ static struct pci_device_id p54p_table[] __devinitdata = { { PCI_DEVICE(0x1260, 0x3877) }, /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ { PCI_DEVICE(0x1260, 0x3886) }, + /* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */ + { PCI_DEVICE(0x1260, 0xffff) }, { }, }; diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index c4ec5c158aa1..a01bbe22a2f8 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -775,7 +775,7 @@ static int __devinit ds1307_probe(struct i2c_client *client, read_rtc: /* read RTC registers */ - tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf); + tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf); if (tmp != 8) { pr_debug("read error %d\n", tmp); err = -EIO; @@ -860,7 +860,7 @@ read_rtc: if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) tmp += 12; i2c_smbus_write_byte_data(client, - DS1307_REG_HOUR, + ds1307->offset + DS1307_REG_HOUR, bin2bcd(tmp)); } diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 7be331db8109..645ddd9d9b9e 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -655,9 +655,9 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) /* Does this really need to be GFP_DMA? */ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); if(!p) { - kfree (usg); - dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", + dprintk((KERN_DEBUG "aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", usg->sg[i].count,i,usg->count)); + kfree(usg); rcode = -ENOMEM; goto cleanup; } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 300cea768d74..7feb902c32cb 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) } } +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + #ifdef CONFIG_CONSOLE_POLL /* Serial polling routines for writing and reading from the uart while * in an interrupt or debug context. @@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port, static char ch[2]; ch[0] = (char)c; - cpm_uart_early_write(pinfo->port.line, ch, 1); + cpm_uart_early_write(pinfo, ch, 1); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cp; unsigned long flags; int nolock = oops_in_progress; @@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, spin_lock_irqsave(&pinfo->port.lock, flags); } - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = *s; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; + cpm_uart_early_write(pinfo, s, count); if (unlikely(nolock)) { local_irq_restore(flags); diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 1fb2a6ea328c..3fc4103eb208 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -65,28 +65,6 @@ struct mpc8xxx_spi_reg { __be32 receive; }; -/* SPI Parameter RAM */ -struct spi_pram { - __be16 rbase; /* Rx Buffer descriptor base address */ - __be16 tbase; /* Tx Buffer descriptor base address */ - u8 rfcr; /* Rx function code */ - u8 tfcr; /* Tx function code */ - __be16 mrblr; /* Max receive buffer length */ - __be32 rstate; /* Internal */ - __be32 rdp; /* Internal */ - __be16 rbptr; /* Internal */ - __be16 rbc; /* Internal */ - __be32 rxtmp; /* Internal */ - __be32 tstate; /* Internal */ - __be32 tdp; /* Internal */ - __be16 tbptr; /* Internal */ - __be16 tbc; /* Internal */ - __be32 txtmp; /* Internal */ - __be32 res; /* Tx temp. */ - __be16 rpbase; /* Relocation pointer (CPM1 only) */ - __be16 res1; /* Reserved */ -}; - /* SPI Controller mode register definitions */ #define SPMODE_LOOP (1 << 30) #define SPMODE_CI_INACTIVEHIGH (1 << 29) diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 9681536163ca..bbf1cb21a7d3 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -233,6 +233,9 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c index 64abd11f6fbb..8e194d557cac 100644 --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -495,9 +495,9 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); } +/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */ void ssb_pmu_init(struct ssb_chipcommon *cc) { - struct ssb_bus *bus = cc->dev->bus; u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) @@ -509,15 +509,12 @@ void ssb_pmu_init(struct ssb_chipcommon *cc) ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); - if (cc->pmu.rev >= 1) { - if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { - chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, - ~SSB_CHIPCO_PMU_CTL_NOILPONW); - } else { - chipco_set32(cc, SSB_CHIPCO_PMU_CTL, - SSB_CHIPCO_PMU_CTL_NOILPONW); - } - } + if (cc->pmu.rev == 1) + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, + ~SSB_CHIPCO_PMU_CTL_NOILPONW); + else + chipco_set32(cc, SSB_CHIPCO_PMU_CTL, + SSB_CHIPCO_PMU_CTL_NOILPONW); ssb_pmu_pll_init(cc); ssb_pmu_resources_init(cc); } diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 9e50896233aa..17a178139548 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -22,6 +22,7 @@ #include "ssb_private.h" +bool ssb_is_sprom_available(struct ssb_bus *bus); /* Define the following to 1 to enable a printk on each coreswitch. */ #define SSB_VERBOSE_PCICORESWITCH_DEBUG 0 @@ -167,7 +168,7 @@ err_pci: } /* Get the word-offset for a SSB_SPROM_XXX define. */ -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) +#define SPOFF(offset) ((offset) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ #define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) @@ -252,8 +253,13 @@ static int sprom_do_read(struct ssb_bus *bus, u16 *sprom) { int i; + /* Check if SPROM can be read */ + if (ioread16(bus->mmio + bus->sprom_offset) == 0xFFFF) { + ssb_printk(KERN_ERR PFX "Unable to read SPROM\n"); + return -ENODEV; + } for (i = 0; i < bus->sprom_size; i++) - sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); + sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); return 0; } @@ -284,7 +290,7 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom) ssb_printk("75%%"); else if (i % 2) ssb_printk("."); - writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); mmiowb(); msleep(20); } @@ -620,21 +626,49 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, int err = -ENOMEM; u16 *buf; + if (!ssb_is_sprom_available(bus)) { + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } + if (bus->chipco.dev) { /* can be unavailible! */ + /* + * get SPROM offset: SSB_SPROM_BASE1 except for + * chipcommon rev >= 31 or chip ID is 0x4312 and + * chipcommon status & 3 == 2 + */ + if (bus->chipco.dev->id.revision >= 31) + bus->sprom_offset = SSB_SPROM_BASE31; + else if (bus->chip_id == 0x4312 && + (bus->chipco.status & 0x03) == 2) + bus->sprom_offset = SSB_SPROM_BASE31; + else + bus->sprom_offset = SSB_SPROM_BASE1; + } else { + bus->sprom_offset = SSB_SPROM_BASE1; + } + ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) goto out; bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; - sprom_do_read(bus, buf); + err = sprom_do_read(bus, buf); + if (err) + goto out_free; err = sprom_check_crc(buf, bus->sprom_size); if (err) { /* try for a 440 byte SPROM - revision 4 and higher */ kfree(buf); buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); - if (!buf) + if (!buf) { + err = -ENOMEM; goto out; + } bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; - sprom_do_read(bus, buf); + err = sprom_do_read(bus, buf); + if (err) + goto out_free; err = sprom_check_crc(buf, bus->sprom_size); if (err) { /* All CRC attempts failed. diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c index d0e6762fec50..7249f26b2dc7 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -175,3 +175,18 @@ const struct ssb_sprom *ssb_get_fallback_sprom(void) { return fallback_sprom; } + +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +bool ssb_is_sprom_available(struct ssb_bus *bus) +{ + /* status register only exists on chipcomon rev >= 11 and we need check + for >= 31 only */ + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->chipco.dev && /* can be unavailible! */ + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + + return true; +} diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index 55337c8fa222..8ff9fed09cb4 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -118,6 +118,7 @@ static struct usb_device_id rtl8192_usb_id_tbl[] = { {USB_DEVICE(0x07aa, 0x0043)}, /* Belkin */ {USB_DEVICE(0x050d, 0x805E)}, + {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */ /* Sitecom */ {USB_DEVICE(0x0df6, 0x0031)}, {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */ diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 4a4e7ee84f0c..95967b818f24 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1790,9 +1790,6 @@ int usb_external_resume_device(struct usb_device *udev, pm_message_t msg) static void choose_wakeup(struct usb_device *udev, pm_message_t msg) { - int w, i; - struct usb_interface *intf; - /* Remote wakeup is needed only when we actually go to sleep. * For things like FREEZE and QUIESCE, if the device is already * autosuspended then its current wakeup setting is okay. @@ -1802,18 +1799,10 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg) return; } - /* If remote wakeup is permitted, see whether any interface drivers + /* Allow remote wakeup if it is enabled, even if no interface drivers * actually want it. */ - w = 0; - if (device_may_wakeup(&udev->dev) && udev->actconfig) { - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - w |= intf->needs_remote_wakeup; - } - } - - udev->do_remote_wakeup = w; + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); } int usb_suspend(struct device *dev, pm_message_t msg) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab93918d9207..a61f1607f90e 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Artisman Watchdog Dongle */ + { USB_DEVICE(0x04b4, 0x0526), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, + /* Broadcom BCM92035DGROM BT dongle */ + { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index adf8260c3a6a..9e5f9f1e47a2 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -535,17 +535,11 @@ recycle: list_move(&req->list, &port->read_pool); } - /* Push from tty to ldisc; this is immediate with low_latency, and - * may trigger callbacks to this driver ... so drop the spinlock. + /* Push from tty to ldisc; without low_latency set this is handled by + * a workqueue, so we won't get callbacks and can hold port_lock */ if (tty && do_push) { - spin_unlock_irq(&port->port_lock); tty_flip_buffer_push(tty); - wake_up_interruptible(&tty->read_wait); - spin_lock_irq(&port->port_lock); - - /* tty may have been closed */ - tty = port->port_tty; } @@ -783,11 +777,6 @@ static int gs_open(struct tty_struct *tty, struct file *file) port->open_count = 1; port->openclose = false; - /* low_latency means ldiscs work in tasklet context, without - * needing a workqueue schedule ... easier to keep up. - */ - tty->low_latency = 1; - /* if connected, start the I/O stream */ if (port->port_usb) { struct gserial *gser = port->port_usb; @@ -1194,6 +1183,7 @@ void gserial_cleanup(void) n_ports = 0; tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); gs_tty_driver = NULL; pr_debug("%s: cleaned up ttyGS* support\n", __func__); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 35c56f40bdbb..798b407a9546 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - if (otg_init(pdata->otg) != 0) - dev_err(dev, "unable to init transceiver\n"); - else if (otg_set_vbus(pdata->otg, 1) != 0) + ret = otg_init(pdata->otg); + if (ret) { + dev_err(dev, "unable to init transceiver, probably missing\n"); + ret = -ENODEV; + goto err_add; + } + ret = otg_set_vbus(pdata->otg, 1); + if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); + goto err_add; + } } priv->hcd = hcd; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 8b37a4b9839e..be41ec35c655 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2435,7 +2435,8 @@ sisusb_open(struct inode *inode, struct file *file) } if (!sisusb->devinit) { - if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) { + if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH || + sisusb->sisusb_dev->speed == USB_SPEED_SUPER) { if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n"); @@ -3167,7 +3168,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->present = 1; - if (dev->speed == USB_SPEED_HIGH) { + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { int initscreen = 1; #ifdef INCL_SISUSB_CON if (sisusb_first_vc > 0 && diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c19ad5f1b84..bc11d0cf3060 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -697,6 +697,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, @@ -743,6 +744,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 8f9e80583257..ffdcec75b56f 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -703,6 +703,12 @@ #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ /* + * RT Systems programming cables for various ham radios + */ +#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ +#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ + +/* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ */ @@ -1024,3 +1030,12 @@ #define MJSG_SR_RADIO_PID 0x9379 #define MJSG_XM_RADIO_PID 0x937A #define MJSG_HD_RADIO_PID 0x937C + +/* + * Xverve Signalyzer tools (http://www.signalyzer.com/) + */ +#define XVERVE_SIGNALYZER_ST_PID 0xBCA0 +#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1 +#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 +#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 + diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 64b50f62f40b..c5def6d916b8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -226,6 +226,7 @@ static int option_resume(struct usb_serial *serial); #define AMOI_PRODUCT_H01 0x0800 #define AMOI_PRODUCT_H01A 0x7002 #define AMOI_PRODUCT_H02 0x0802 +#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407 #define DELL_VENDOR_ID 0x413C @@ -316,6 +317,7 @@ static int option_resume(struct usb_serial *serial); #define QISDA_PRODUCT_H21_4512 0x4512 #define QISDA_PRODUCT_H21_4523 0x4523 #define QISDA_PRODUCT_H20_4515 0x4515 +#define QISDA_PRODUCT_H20_4518 0x4518 #define QISDA_PRODUCT_H20_4519 0x4519 /* TLAYTECH PRODUCTS */ @@ -503,6 +505,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ @@ -836,6 +839,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index a44298999e20..6435b2604aff 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -244,6 +244,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ + { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */ /* Sierra Wireless C597 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless T598 */ |