summaryrefslogtreecommitdiff
path: root/drivers/tty/hvc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/hvc')
-rw-r--r--drivers/tty/hvc/Makefile13
-rw-r--r--drivers/tty/hvc/hvc_beat.c134
-rw-r--r--drivers/tty/hvc/hvc_console.c914
-rw-r--r--drivers/tty/hvc/hvc_console.h119
-rw-r--r--drivers/tty/hvc/hvc_dcc.c133
-rw-r--r--drivers/tty/hvc/hvc_irq.c49
-rw-r--r--drivers/tty/hvc/hvc_iseries.c598
-rw-r--r--drivers/tty/hvc/hvc_iucv.c1337
-rw-r--r--drivers/tty/hvc/hvc_rtas.c133
-rw-r--r--drivers/tty/hvc/hvc_tile.c68
-rw-r--r--drivers/tty/hvc/hvc_udbg.c96
-rw-r--r--drivers/tty/hvc/hvc_vio.c173
-rw-r--r--drivers/tty/hvc/hvc_xen.c271
-rw-r--r--drivers/tty/hvc/hvcs.c1604
-rw-r--r--drivers/tty/hvc/hvsi.c1314
-rw-r--r--drivers/tty/hvc/virtio_console.c1838
16 files changed, 8794 insertions, 0 deletions
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
new file mode 100644
index 000000000000..e6bed5f177ff
--- /dev/null
+++ b/drivers/tty/hvc/Makefile
@@ -0,0 +1,13 @@
+obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o
+obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o
+obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o
+obj-$(CONFIG_HVC_TILE) += hvc_tile.o
+obj-$(CONFIG_HVC_DCC) += hvc_dcc.o
+obj-$(CONFIG_HVC_BEAT) += hvc_beat.o
+obj-$(CONFIG_HVC_DRIVER) += hvc_console.o
+obj-$(CONFIG_HVC_IRQ) += hvc_irq.o
+obj-$(CONFIG_HVC_XEN) += hvc_xen.o
+obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o
+obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o
+obj-$(CONFIG_HVCS) += hvcs.o
+obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
diff --git a/drivers/tty/hvc/hvc_beat.c b/drivers/tty/hvc/hvc_beat.c
new file mode 100644
index 000000000000..5fe4631e2a61
--- /dev/null
+++ b/drivers/tty/hvc/hvc_beat.c
@@ -0,0 +1,134 @@
+/*
+ * Beat hypervisor console driver
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/char/hvc_rtas.c:
+ * (C) Copyright IBM Corporation 2001-2005
+ * (C) Copyright Red Hat, Inc. 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <asm/prom.h>
+#include <asm/hvconsole.h>
+#include <asm/firmware.h>
+
+#include "hvc_console.h"
+
+extern int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
+extern int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
+
+struct hvc_struct *hvc_beat_dev = NULL;
+
+/* bug: only one queue is available regardless of vtermno */
+static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt)
+{
+ static unsigned char q[sizeof(unsigned long) * 2]
+ __attribute__((aligned(sizeof(unsigned long))));
+ static int qlen = 0;
+ u64 got;
+
+again:
+ if (qlen) {
+ if (qlen > cnt) {
+ memcpy(buf, q, cnt);
+ qlen -= cnt;
+ memmove(q + cnt, q, qlen);
+ return cnt;
+ } else { /* qlen <= cnt */
+ int r;
+
+ memcpy(buf, q, qlen);
+ r = qlen;
+ qlen = 0;
+ return r;
+ }
+ }
+ if (beat_get_term_char(vtermno, &got,
+ ((u64 *)q), ((u64 *)q) + 1) == 0) {
+ qlen = got;
+ goto again;
+ }
+ return 0;
+}
+
+static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt)
+{
+ unsigned long kb[2];
+ int rest, nlen;
+
+ for (rest = cnt; rest > 0; rest -= nlen) {
+ nlen = (rest > 16) ? 16 : rest;
+ memcpy(kb, buf, nlen);
+ beat_put_term_char(vtermno, nlen, kb[0], kb[1]);
+ buf += nlen;
+ }
+ return cnt;
+}
+
+static const struct hv_ops hvc_beat_get_put_ops = {
+ .get_chars = hvc_beat_get_chars,
+ .put_chars = hvc_beat_put_chars,
+};
+
+static int hvc_beat_useit = 1;
+
+static int hvc_beat_config(char *p)
+{
+ hvc_beat_useit = simple_strtoul(p, NULL, 0);
+ return 0;
+}
+
+static int __init hvc_beat_console_init(void)
+{
+ if (hvc_beat_useit && of_machine_is_compatible("Beat")) {
+ hvc_instantiate(0, 0, &hvc_beat_get_put_ops);
+ }
+ return 0;
+}
+
+/* temp */
+static int __init hvc_beat_init(void)
+{
+ struct hvc_struct *hp;
+
+ if (!firmware_has_feature(FW_FEATURE_BEAT))
+ return -ENODEV;
+
+ hp = hvc_alloc(0, NO_IRQ, &hvc_beat_get_put_ops, 16);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+ hvc_beat_dev = hp;
+ return 0;
+}
+
+static void __exit hvc_beat_exit(void)
+{
+ if (hvc_beat_dev)
+ hvc_remove(hvc_beat_dev);
+}
+
+module_init(hvc_beat_init);
+module_exit(hvc_beat_exit);
+
+__setup("hvc_beat=", hvc_beat_config);
+
+console_initcall(hvc_beat_console_init);
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
new file mode 100644
index 000000000000..e9cba13ee800
--- /dev/null
+++ b/drivers/tty/hvc/hvc_console.c
@@ -0,0 +1,914 @@
+/*
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2004 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Additional Author(s):
+ * Ryan S. Arnold <rsa@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kbd_kern.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/major.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+
+#include <asm/uaccess.h>
+
+#include "hvc_console.h"
+
+#define HVC_MAJOR 229
+#define HVC_MINOR 0
+
+/*
+ * Wait this long per iteration while trying to push buffered data to the
+ * hypervisor before allowing the tty to complete a close operation.
+ */
+#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */
+
+/*
+ * These sizes are most efficient for vio, because they are the
+ * native transfer size. We could make them selectable in the
+ * future to better deal with backends that want other buffer sizes.
+ */
+#define N_OUTBUF 16
+#define N_INBUF 16
+
+#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
+
+static struct tty_driver *hvc_driver;
+static struct task_struct *hvc_task;
+
+/* Picks up late kicks after list walk but before schedule() */
+static int hvc_kicked;
+
+static int hvc_init(void);
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static int sysrq_pressed;
+#endif
+
+/* dynamic list of hvc_struct instances */
+static LIST_HEAD(hvc_structs);
+
+/*
+ * Protect the list of hvc_struct instances from inserts and removals during
+ * list traversal.
+ */
+static DEFINE_SPINLOCK(hvc_structs_lock);
+
+/*
+ * This value is used to assign a tty->index value to a hvc_struct based
+ * upon order of exposure via hvc_probe(), when we can not match it to
+ * a console candidate registered with hvc_instantiate().
+ */
+static int last_hvc = -1;
+
+/*
+ * Do not call this function with either the hvc_structs_lock or the hvc_struct
+ * lock held. If successful, this function increments the kref reference
+ * count against the target hvc_struct so it should be released when finished.
+ */
+static struct hvc_struct *hvc_get_by_index(int index)
+{
+ struct hvc_struct *hp;
+ unsigned long flags;
+
+ spin_lock(&hvc_structs_lock);
+
+ list_for_each_entry(hp, &hvc_structs, next) {
+ spin_lock_irqsave(&hp->lock, flags);
+ if (hp->index == index) {
+ kref_get(&hp->kref);
+ spin_unlock_irqrestore(&hp->lock, flags);
+ spin_unlock(&hvc_structs_lock);
+ return hp;
+ }
+ spin_unlock_irqrestore(&hp->lock, flags);
+ }
+ hp = NULL;
+
+ spin_unlock(&hvc_structs_lock);
+ return hp;
+}
+
+
+/*
+ * Initial console vtermnos for console API usage prior to full console
+ * initialization. Any vty adapter outside this range will not have usable
+ * console interfaces but can still be used as a tty device. This has to be
+ * static because kmalloc will not work during early console init.
+ */
+static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
+static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] =
+ {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1};
+
+/*
+ * Console APIs, NOT TTY. These APIs are available immediately when
+ * hvc_console_setup() finds adapters.
+ */
+
+static void hvc_console_print(struct console *co, const char *b,
+ unsigned count)
+{
+ char c[N_OUTBUF] __ALIGNED__;
+ unsigned i = 0, n = 0;
+ int r, donecr = 0, index = co->index;
+
+ /* Console access attempt outside of acceptable console range. */
+ if (index >= MAX_NR_HVC_CONSOLES)
+ return;
+
+ /* This console adapter was removed so it is not usable. */
+ if (vtermnos[index] == -1)
+ return;
+
+ while (count > 0 || i > 0) {
+ if (count > 0 && i < sizeof(c)) {
+ if (b[n] == '\n' && !donecr) {
+ c[i++] = '\r';
+ donecr = 1;
+ } else {
+ c[i++] = b[n++];
+ donecr = 0;
+ --count;
+ }
+ } else {
+ r = cons_ops[index]->put_chars(vtermnos[index], c, i);
+ if (r <= 0) {
+ /* throw away chars on error */
+ i = 0;
+ } else if (r > 0) {
+ i -= r;
+ if (i > 0)
+ memmove(c, c+r, i);
+ }
+ }
+ }
+}
+
+static struct tty_driver *hvc_console_device(struct console *c, int *index)
+{
+ if (vtermnos[c->index] == -1)
+ return NULL;
+
+ *index = c->index;
+ return hvc_driver;
+}
+
+static int __init hvc_console_setup(struct console *co, char *options)
+{
+ if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
+ return -ENODEV;
+
+ if (vtermnos[co->index] == -1)
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct console hvc_console = {
+ .name = "hvc",
+ .write = hvc_console_print,
+ .device = hvc_console_device,
+ .setup = hvc_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/*
+ * Early console initialization. Precedes driver initialization.
+ *
+ * (1) we are first, and the user specified another driver
+ * -- index will remain -1
+ * (2) we are first and the user specified no driver
+ * -- index will be set to 0, then we will fail setup.
+ * (3) we are first and the user specified our driver
+ * -- index will be set to user specified driver, and we will fail
+ * (4) we are after driver, and this initcall will register us
+ * -- if the user didn't specify a driver then the console will match
+ *
+ * Note that for cases 2 and 3, we will match later when the io driver
+ * calls hvc_instantiate() and call register again.
+ */
+static int __init hvc_console_init(void)
+{
+ register_console(&hvc_console);
+ return 0;
+}
+console_initcall(hvc_console_init);
+
+/* callback when the kboject ref count reaches zero. */
+static void destroy_hvc_struct(struct kref *kref)
+{
+ struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref);
+ unsigned long flags;
+
+ spin_lock(&hvc_structs_lock);
+
+ spin_lock_irqsave(&hp->lock, flags);
+ list_del(&(hp->next));
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ spin_unlock(&hvc_structs_lock);
+
+ kfree(hp);
+}
+
+/*
+ * hvc_instantiate() is an early console discovery method which locates
+ * consoles * prior to the vio subsystem discovering them. Hotplugged
+ * vty adapters do NOT get an hvc_instantiate() callback since they
+ * appear after early console init.
+ */
+int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
+{
+ struct hvc_struct *hp;
+
+ if (index < 0 || index >= MAX_NR_HVC_CONSOLES)
+ return -1;
+
+ if (vtermnos[index] != -1)
+ return -1;
+
+ /* make sure no no tty has been registered in this index */
+ hp = hvc_get_by_index(index);
+ if (hp) {
+ kref_put(&hp->kref, destroy_hvc_struct);
+ return -1;
+ }
+
+ vtermnos[index] = vtermno;
+ cons_ops[index] = ops;
+
+ /* reserve all indices up to and including this index */
+ if (last_hvc < index)
+ last_hvc = index;
+
+ /* if this index is what the user requested, then register
+ * now (setup won't fail at this point). It's ok to just
+ * call register again if previously .setup failed.
+ */
+ if (index == hvc_console.index)
+ register_console(&hvc_console);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hvc_instantiate);
+
+/* Wake the sleeping khvcd */
+void hvc_kick(void)
+{
+ hvc_kicked = 1;
+ wake_up_process(hvc_task);
+}
+EXPORT_SYMBOL_GPL(hvc_kick);
+
+static void hvc_unthrottle(struct tty_struct *tty)
+{
+ hvc_kick();
+}
+
+/*
+ * The TTY interface won't be used until after the vio layer has exposed the vty
+ * adapter to the kernel.
+ */
+static int hvc_open(struct tty_struct *tty, struct file * filp)
+{
+ struct hvc_struct *hp;
+ unsigned long flags;
+ int rc = 0;
+
+ /* Auto increments kref reference if found. */
+ if (!(hp = hvc_get_by_index(tty->index)))
+ return -ENODEV;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ /* Check and then increment for fast path open. */
+ if (hp->count++ > 0) {
+ tty_kref_get(tty);
+ spin_unlock_irqrestore(&hp->lock, flags);
+ hvc_kick();
+ return 0;
+ } /* else count == 0 */
+
+ tty->driver_data = hp;
+
+ hp->tty = tty_kref_get(tty);
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (hp->ops->notifier_add)
+ rc = hp->ops->notifier_add(hp, hp->data);
+
+ /*
+ * If the notifier fails we return an error. The tty layer
+ * will call hvc_close() after a failed open but we don't want to clean
+ * up there so we'll clean up here and clear out the previously set
+ * tty fields and return the kref reference.
+ */
+ if (rc) {
+ spin_lock_irqsave(&hp->lock, flags);
+ hp->tty = NULL;
+ spin_unlock_irqrestore(&hp->lock, flags);
+ tty_kref_put(tty);
+ tty->driver_data = NULL;
+ kref_put(&hp->kref, destroy_hvc_struct);
+ printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
+ }
+ /* Force wakeup of the polling thread */
+ hvc_kick();
+
+ return rc;
+}
+
+static void hvc_close(struct tty_struct *tty, struct file * filp)
+{
+ struct hvc_struct *hp;
+ unsigned long flags;
+
+ if (tty_hung_up_p(filp))
+ return;
+
+ /*
+ * No driver_data means that this close was issued after a failed
+ * hvc_open by the tty layer's release_dev() function and we can just
+ * exit cleanly because the kref reference wasn't made.
+ */
+ if (!tty->driver_data)
+ return;
+
+ hp = tty->driver_data;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ if (--hp->count == 0) {
+ /* We are done with the tty pointer now. */
+ hp->tty = NULL;
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (hp->ops->notifier_del)
+ hp->ops->notifier_del(hp, hp->data);
+
+ /* cancel pending tty resize work */
+ cancel_work_sync(&hp->tty_resize);
+
+ /*
+ * Chain calls chars_in_buffer() and returns immediately if
+ * there is no buffered data otherwise sleeps on a wait queue
+ * waking periodically to check chars_in_buffer().
+ */
+ tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
+ } else {
+ if (hp->count < 0)
+ printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
+ hp->vtermno, hp->count);
+ spin_unlock_irqrestore(&hp->lock, flags);
+ }
+
+ tty_kref_put(tty);
+ kref_put(&hp->kref, destroy_hvc_struct);
+}
+
+static void hvc_hangup(struct tty_struct *tty)
+{
+ struct hvc_struct *hp = tty->driver_data;
+ unsigned long flags;
+ int temp_open_count;
+
+ if (!hp)
+ return;
+
+ /* cancel pending tty resize work */
+ cancel_work_sync(&hp->tty_resize);
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ /*
+ * The N_TTY line discipline has problems such that in a close vs
+ * open->hangup case this can be called after the final close so prevent
+ * that from happening for now.
+ */
+ if (hp->count <= 0) {
+ spin_unlock_irqrestore(&hp->lock, flags);
+ return;
+ }
+
+ temp_open_count = hp->count;
+ hp->count = 0;
+ hp->n_outbuf = 0;
+ hp->tty = NULL;
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (hp->ops->notifier_hangup)
+ hp->ops->notifier_hangup(hp, hp->data);
+
+ while(temp_open_count) {
+ --temp_open_count;
+ tty_kref_put(tty);
+ kref_put(&hp->kref, destroy_hvc_struct);
+ }
+}
+
+/*
+ * Push buffered characters whether they were just recently buffered or waiting
+ * on a blocked hypervisor. Call this function with hp->lock held.
+ */
+static int hvc_push(struct hvc_struct *hp)
+{
+ int n;
+
+ n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf);
+ if (n <= 0) {
+ if (n == 0) {
+ hp->do_wakeup = 1;
+ return 0;
+ }
+ /* throw away output on error; this happens when
+ there is no session connected to the vterm. */
+ hp->n_outbuf = 0;
+ } else
+ hp->n_outbuf -= n;
+ if (hp->n_outbuf > 0)
+ memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf);
+ else
+ hp->do_wakeup = 1;
+
+ return n;
+}
+
+static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ struct hvc_struct *hp = tty->driver_data;
+ unsigned long flags;
+ int rsize, written = 0;
+
+ /* This write was probably executed during a tty close. */
+ if (!hp)
+ return -EPIPE;
+
+ if (hp->count <= 0)
+ return -EIO;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ /* Push pending writes */
+ if (hp->n_outbuf > 0)
+ hvc_push(hp);
+
+ while (count > 0 && (rsize = hp->outbuf_size - hp->n_outbuf) > 0) {
+ if (rsize > count)
+ rsize = count;
+ memcpy(hp->outbuf + hp->n_outbuf, buf, rsize);
+ count -= rsize;
+ buf += rsize;
+ hp->n_outbuf += rsize;
+ written += rsize;
+ hvc_push(hp);
+ }
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ /*
+ * Racy, but harmless, kick thread if there is still pending data.
+ */
+ if (hp->n_outbuf)
+ hvc_kick();
+
+ return written;
+}
+
+/**
+ * hvc_set_winsz() - Resize the hvc tty terminal window.
+ * @work: work structure.
+ *
+ * The routine shall not be called within an atomic context because it
+ * might sleep.
+ *
+ * Locking: hp->lock
+ */
+static void hvc_set_winsz(struct work_struct *work)
+{
+ struct hvc_struct *hp;
+ unsigned long hvc_flags;
+ struct tty_struct *tty;
+ struct winsize ws;
+
+ hp = container_of(work, struct hvc_struct, tty_resize);
+
+ spin_lock_irqsave(&hp->lock, hvc_flags);
+ if (!hp->tty) {
+ spin_unlock_irqrestore(&hp->lock, hvc_flags);
+ return;
+ }
+ ws = hp->ws;
+ tty = tty_kref_get(hp->tty);
+ spin_unlock_irqrestore(&hp->lock, hvc_flags);
+
+ tty_do_resize(tty, &ws);
+ tty_kref_put(tty);
+}
+
+/*
+ * This is actually a contract between the driver and the tty layer outlining
+ * how much write room the driver can guarantee will be sent OR BUFFERED. This
+ * driver MUST honor the return value.
+ */
+static int hvc_write_room(struct tty_struct *tty)
+{
+ struct hvc_struct *hp = tty->driver_data;
+
+ if (!hp)
+ return -1;
+
+ return hp->outbuf_size - hp->n_outbuf;
+}
+
+static int hvc_chars_in_buffer(struct tty_struct *tty)
+{
+ struct hvc_struct *hp = tty->driver_data;
+
+ if (!hp)
+ return 0;
+ return hp->n_outbuf;
+}
+
+/*
+ * timeout will vary between the MIN and MAX values defined here. By default
+ * and during console activity we will use a default MIN_TIMEOUT of 10. When
+ * the console is idle, we increase the timeout value on each pass through
+ * msleep until we reach the max. This may be noticeable as a brief (average
+ * one second) delay on the console before the console responds to input when
+ * there has been no input for some time.
+ */
+#define MIN_TIMEOUT (10)
+#define MAX_TIMEOUT (2000)
+static u32 timeout = MIN_TIMEOUT;
+
+#define HVC_POLL_READ 0x00000001
+#define HVC_POLL_WRITE 0x00000002
+
+int hvc_poll(struct hvc_struct *hp)
+{
+ struct tty_struct *tty;
+ int i, n, poll_mask = 0;
+ char buf[N_INBUF] __ALIGNED__;
+ unsigned long flags;
+ int read_total = 0;
+ int written_total = 0;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ /* Push pending writes */
+ if (hp->n_outbuf > 0)
+ written_total = hvc_push(hp);
+
+ /* Reschedule us if still some write pending */
+ if (hp->n_outbuf > 0) {
+ poll_mask |= HVC_POLL_WRITE;
+ /* If hvc_push() was not able to write, sleep a few msecs */
+ timeout = (written_total) ? 0 : MIN_TIMEOUT;
+ }
+
+ /* No tty attached, just skip */
+ tty = tty_kref_get(hp->tty);
+ if (tty == NULL)
+ goto bail;
+
+ /* Now check if we can get data (are we throttled ?) */
+ if (test_bit(TTY_THROTTLED, &tty->flags))
+ goto throttled;
+
+ /* If we aren't notifier driven and aren't throttled, we always
+ * request a reschedule
+ */
+ if (!hp->irq_requested)
+ poll_mask |= HVC_POLL_READ;
+
+ /* Read data if any */
+ for (;;) {
+ int count = tty_buffer_request_room(tty, N_INBUF);
+
+ /* If flip is full, just reschedule a later read */
+ if (count == 0) {
+ poll_mask |= HVC_POLL_READ;
+ break;
+ }
+
+ n = hp->ops->get_chars(hp->vtermno, buf, count);
+ if (n <= 0) {
+ /* Hangup the tty when disconnected from host */
+ if (n == -EPIPE) {
+ spin_unlock_irqrestore(&hp->lock, flags);
+ tty_hangup(tty);
+ spin_lock_irqsave(&hp->lock, flags);
+ } else if ( n == -EAGAIN ) {
+ /*
+ * Some back-ends can only ensure a certain min
+ * num of bytes read, which may be > 'count'.
+ * Let the tty clear the flip buff to make room.
+ */
+ poll_mask |= HVC_POLL_READ;
+ }
+ break;
+ }
+ for (i = 0; i < n; ++i) {
+#ifdef CONFIG_MAGIC_SYSRQ
+ if (hp->index == hvc_console.index) {
+ /* Handle the SysRq Hack */
+ /* XXX should support a sequence */
+ if (buf[i] == '\x0f') { /* ^O */
+ /* if ^O is pressed again, reset
+ * sysrq_pressed and flip ^O char */
+ sysrq_pressed = !sysrq_pressed;
+ if (sysrq_pressed)
+ continue;
+ } else if (sysrq_pressed) {
+ handle_sysrq(buf[i]);
+ sysrq_pressed = 0;
+ continue;
+ }
+ }
+#endif /* CONFIG_MAGIC_SYSRQ */
+ tty_insert_flip_char(tty, buf[i], 0);
+ }
+
+ read_total += n;
+ }
+ throttled:
+ /* Wakeup write queue if necessary */
+ if (hp->do_wakeup) {
+ hp->do_wakeup = 0;
+ tty_wakeup(tty);
+ }
+ bail:
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (read_total) {
+ /* Activity is occurring, so reset the polling backoff value to
+ a minimum for performance. */
+ timeout = MIN_TIMEOUT;
+
+ tty_flip_buffer_push(tty);
+ }
+ if (tty)
+ tty_kref_put(tty);
+
+ return poll_mask;
+}
+EXPORT_SYMBOL_GPL(hvc_poll);
+
+/**
+ * __hvc_resize() - Update terminal window size information.
+ * @hp: HVC console pointer
+ * @ws: Terminal window size structure
+ *
+ * Stores the specified window size information in the hvc structure of @hp.
+ * The function schedule the tty resize update.
+ *
+ * Locking: Locking free; the function MUST be called holding hp->lock
+ */
+void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+ hp->ws = ws;
+ schedule_work(&hp->tty_resize);
+}
+EXPORT_SYMBOL_GPL(__hvc_resize);
+
+/*
+ * This kthread is either polling or interrupt driven. This is determined by
+ * calling hvc_poll() who determines whether a console adapter support
+ * interrupts.
+ */
+static int khvcd(void *unused)
+{
+ int poll_mask;
+ struct hvc_struct *hp;
+
+ set_freezable();
+ do {
+ poll_mask = 0;
+ hvc_kicked = 0;
+ try_to_freeze();
+ wmb();
+ if (!cpus_are_in_xmon()) {
+ spin_lock(&hvc_structs_lock);
+ list_for_each_entry(hp, &hvc_structs, next) {
+ poll_mask |= hvc_poll(hp);
+ }
+ spin_unlock(&hvc_structs_lock);
+ } else
+ poll_mask |= HVC_POLL_READ;
+ if (hvc_kicked)
+ continue;
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!hvc_kicked) {
+ if (poll_mask == 0)
+ schedule();
+ else {
+ if (timeout < MAX_TIMEOUT)
+ timeout += (timeout >> 6) + 1;
+
+ msleep_interruptible(timeout);
+ }
+ }
+ __set_current_state(TASK_RUNNING);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+static const struct tty_operations hvc_ops = {
+ .open = hvc_open,
+ .close = hvc_close,
+ .write = hvc_write,
+ .hangup = hvc_hangup,
+ .unthrottle = hvc_unthrottle,
+ .write_room = hvc_write_room,
+ .chars_in_buffer = hvc_chars_in_buffer,
+};
+
+struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
+ const struct hv_ops *ops,
+ int outbuf_size)
+{
+ struct hvc_struct *hp;
+ int i;
+
+ /* We wait until a driver actually comes along */
+ if (!hvc_driver) {
+ int err = hvc_init();
+ if (err)
+ return ERR_PTR(err);
+ }
+
+ hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
+ GFP_KERNEL);
+ if (!hp)
+ return ERR_PTR(-ENOMEM);
+
+ hp->vtermno = vtermno;
+ hp->data = data;
+ hp->ops = ops;
+ hp->outbuf_size = outbuf_size;
+ hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
+
+ kref_init(&hp->kref);
+
+ INIT_WORK(&hp->tty_resize, hvc_set_winsz);
+ spin_lock_init(&hp->lock);
+ spin_lock(&hvc_structs_lock);
+
+ /*
+ * find index to use:
+ * see if this vterm id matches one registered for console.
+ */
+ for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
+ if (vtermnos[i] == hp->vtermno &&
+ cons_ops[i] == hp->ops)
+ break;
+
+ /* no matching slot, just use a counter */
+ if (i >= MAX_NR_HVC_CONSOLES)
+ i = ++last_hvc;
+
+ hp->index = i;
+
+ list_add_tail(&(hp->next), &hvc_structs);
+ spin_unlock(&hvc_structs_lock);
+
+ return hp;
+}
+EXPORT_SYMBOL_GPL(hvc_alloc);
+
+int hvc_remove(struct hvc_struct *hp)
+{
+ unsigned long flags;
+ struct tty_struct *tty;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ tty = tty_kref_get(hp->tty);
+
+ if (hp->index < MAX_NR_HVC_CONSOLES)
+ vtermnos[hp->index] = -1;
+
+ /* Don't whack hp->irq because tty_hangup() will need to free the irq. */
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ /*
+ * We 'put' the instance that was grabbed when the kref instance
+ * was initialized using kref_init(). Let the last holder of this
+ * kref cause it to be removed, which will probably be the tty_vhangup
+ * below.
+ */
+ kref_put(&hp->kref, destroy_hvc_struct);
+
+ /*
+ * This function call will auto chain call hvc_hangup.
+ */
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hvc_remove);
+
+/* Driver initialization: called as soon as someone uses hvc_alloc(). */
+static int hvc_init(void)
+{
+ struct tty_driver *drv;
+ int err;
+
+ /* We need more than hvc_count adapters due to hotplug additions. */
+ drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS);
+ if (!drv) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ drv->owner = THIS_MODULE;
+ drv->driver_name = "hvc";
+ drv->name = "hvc";
+ drv->major = HVC_MAJOR;
+ drv->minor_start = HVC_MINOR;
+ drv->type = TTY_DRIVER_TYPE_SYSTEM;
+ drv->init_termios = tty_std_termios;
+ drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
+ tty_set_operations(drv, &hvc_ops);
+
+ /* Always start the kthread because there can be hotplug vty adapters
+ * added later. */
+ hvc_task = kthread_run(khvcd, NULL, "khvcd");
+ if (IS_ERR(hvc_task)) {
+ printk(KERN_ERR "Couldn't create kthread for console.\n");
+ err = PTR_ERR(hvc_task);
+ goto put_tty;
+ }
+
+ err = tty_register_driver(drv);
+ if (err) {
+ printk(KERN_ERR "Couldn't register hvc console driver\n");
+ goto stop_thread;
+ }
+
+ /*
+ * Make sure tty is fully registered before allowing it to be
+ * found by hvc_console_device.
+ */
+ smp_mb();
+ hvc_driver = drv;
+ return 0;
+
+stop_thread:
+ kthread_stop(hvc_task);
+ hvc_task = NULL;
+put_tty:
+ put_tty_driver(drv);
+out:
+ return err;
+}
+
+/* This isn't particularly necessary due to this being a console driver
+ * but it is nice to be thorough.
+ */
+static void __exit hvc_exit(void)
+{
+ if (hvc_driver) {
+ kthread_stop(hvc_task);
+
+ tty_unregister_driver(hvc_driver);
+ /* return tty_struct instances allocated in hvc_init(). */
+ put_tty_driver(hvc_driver);
+ unregister_console(&hvc_console);
+ }
+}
+module_exit(hvc_exit);
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
new file mode 100644
index 000000000000..54381eba4e4a
--- /dev/null
+++ b/drivers/tty/hvc/hvc_console.h
@@ -0,0 +1,119 @@
+/*
+ * hvc_console.h
+ * Copyright (C) 2005 IBM Corporation
+ *
+ * Author(s):
+ * Ryan S. Arnold <rsa@us.ibm.com>
+ *
+ * hvc_console header information:
+ * moved here from arch/powerpc/include/asm/hvconsole.h
+ * and drivers/char/hvc_console.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef HVC_CONSOLE_H
+#define HVC_CONSOLE_H
+#include <linux/kref.h>
+#include <linux/tty.h>
+#include <linux/spinlock.h>
+
+/*
+ * This is the max number of console adapters that can/will be found as
+ * console devices on first stage console init. Any number beyond this range
+ * can't be used as a console device but is still a valid tty device.
+ */
+#define MAX_NR_HVC_CONSOLES 16
+
+/*
+ * The Linux TTY code does not support dynamic addition of tty derived devices
+ * so we need to know how many tty devices we might need when space is allocated
+ * for the tty device. Since this driver supports hotplug of vty adapters we
+ * need to make sure we have enough allocated.
+ */
+#define HVC_ALLOC_TTY_ADAPTERS 8
+
+struct hvc_struct {
+ spinlock_t lock;
+ int index;
+ struct tty_struct *tty;
+ int count;
+ int do_wakeup;
+ char *outbuf;
+ int outbuf_size;
+ int n_outbuf;
+ uint32_t vtermno;
+ const struct hv_ops *ops;
+ int irq_requested;
+ int data;
+ struct winsize ws;
+ struct work_struct tty_resize;
+ struct list_head next;
+ struct kref kref; /* ref count & hvc_struct lifetime */
+};
+
+/* implemented by a low level driver */
+struct hv_ops {
+ int (*get_chars)(uint32_t vtermno, char *buf, int count);
+ int (*put_chars)(uint32_t vtermno, const char *buf, int count);
+
+ /* Callbacks for notification. Called in open, close and hangup */
+ int (*notifier_add)(struct hvc_struct *hp, int irq);
+ void (*notifier_del)(struct hvc_struct *hp, int irq);
+ void (*notifier_hangup)(struct hvc_struct *hp, int irq);
+};
+
+/* Register a vterm and a slot index for use as a console (console_init) */
+extern int hvc_instantiate(uint32_t vtermno, int index,
+ const struct hv_ops *ops);
+
+/* register a vterm for hvc tty operation (module_init or hotplug add) */
+extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data,
+ const struct hv_ops *ops, int outbuf_size);
+/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
+extern int hvc_remove(struct hvc_struct *hp);
+
+/* data available */
+int hvc_poll(struct hvc_struct *hp);
+void hvc_kick(void);
+
+/* Resize hvc tty terminal window */
+extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
+static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ __hvc_resize(hp, ws);
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
+
+/* default notifier for irq based notification */
+extern int notifier_add_irq(struct hvc_struct *hp, int data);
+extern void notifier_del_irq(struct hvc_struct *hp, int data);
+extern void notifier_hangup_irq(struct hvc_struct *hp, int data);
+
+
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+#include <asm/xmon.h>
+#else
+static inline int cpus_are_in_xmon(void)
+{
+ return 0;
+}
+#endif
+
+#endif // HVC_CONSOLE_H
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
new file mode 100644
index 000000000000..6470f63deb4b
--- /dev/null
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -0,0 +1,133 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+
+#include "hvc_console.h"
+
+/* DCC Status Bits */
+#define DCC_STATUS_RX (1 << 30)
+#define DCC_STATUS_TX (1 << 29)
+
+static inline u32 __dcc_getstatus(void)
+{
+ u32 __ret;
+
+ asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
+ : "=r" (__ret) : : "cc");
+
+ return __ret;
+}
+
+
+#if defined(CONFIG_CPU_V7)
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bne get_wait \n\
+ mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c) : : "cc");
+
+ return __c;
+}
+#else
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c));
+
+ return __c;
+}
+#endif
+
+#if defined(CONFIG_CPU_V7)
+static inline void __dcc_putchar(char c)
+{
+ asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bcs put_wait \n\
+ mcr p14, 0, %0, c0, c5, 0 "
+ : : "r" (c) : "cc");
+}
+#else
+static inline void __dcc_putchar(char c)
+{
+ asm("mcr p14, 0, %0, c0, c5, 0 @ write a char"
+ : /* no output register */
+ : "r" (c));
+}
+#endif
+
+static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ while (__dcc_getstatus() & DCC_STATUS_TX)
+ cpu_relax();
+
+ __dcc_putchar((char)(buf[i] & 0xFF));
+ }
+
+ return count;
+}
+
+static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; ++i) {
+ int c = -1;
+
+ if (__dcc_getstatus() & DCC_STATUS_RX)
+ c = __dcc_getchar();
+ if (c < 0)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_dcc_get_put_ops = {
+ .get_chars = hvc_dcc_get_chars,
+ .put_chars = hvc_dcc_put_chars,
+};
+
+static int __init hvc_dcc_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
+ return 0;
+}
+console_initcall(hvc_dcc_console_init);
+
+static int __init hvc_dcc_init(void)
+{
+ hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
+ return 0;
+}
+device_initcall(hvc_dcc_init);
diff --git a/drivers/tty/hvc/hvc_irq.c b/drivers/tty/hvc/hvc_irq.c
new file mode 100644
index 000000000000..2623e177e8d6
--- /dev/null
+++ b/drivers/tty/hvc/hvc_irq.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This file contains the IRQ specific code for hvc_console
+ *
+ */
+
+#include <linux/interrupt.h>
+
+#include "hvc_console.h"
+
+static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance)
+{
+ /* if hvc_poll request a repoll, then kick the hvcd thread */
+ if (hvc_poll(dev_instance))
+ hvc_kick();
+ return IRQ_HANDLED;
+}
+
+/*
+ * For IRQ based systems these callbacks can be used
+ */
+int notifier_add_irq(struct hvc_struct *hp, int irq)
+{
+ int rc;
+
+ if (!irq) {
+ hp->irq_requested = 0;
+ return 0;
+ }
+ rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED,
+ "hvc_console", hp);
+ if (!rc)
+ hp->irq_requested = 1;
+ return rc;
+}
+
+void notifier_del_irq(struct hvc_struct *hp, int irq)
+{
+ if (!hp->irq_requested)
+ return;
+ free_irq(irq, hp);
+ hp->irq_requested = 0;
+}
+
+void notifier_hangup_irq(struct hvc_struct *hp, int irq)
+{
+ notifier_del_irq(hp, irq);
+}
diff --git a/drivers/tty/hvc/hvc_iseries.c b/drivers/tty/hvc/hvc_iseries.c
new file mode 100644
index 000000000000..21c54955084e
--- /dev/null
+++ b/drivers/tty/hvc/hvc_iseries.c
@@ -0,0 +1,598 @@
+/*
+ * iSeries vio driver interface to hvc_console.c
+ *
+ * This code is based heavily on hvc_vio.c and viocons.c
+ *
+ * Copyright (C) 2006 Stephen Rothwell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/console.h>
+
+#include <asm/hvconsole.h>
+#include <asm/vio.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/hv_call.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_lp_event.h>
+
+#include "hvc_console.h"
+
+#define VTTY_PORTS 10
+
+static DEFINE_SPINLOCK(consolelock);
+static DEFINE_SPINLOCK(consoleloglock);
+
+static const char hvc_driver_name[] = "hvc_console";
+
+#define IN_BUF_SIZE 200
+
+/*
+ * Our port information.
+ */
+static struct port_info {
+ HvLpIndex lp;
+ u64 seq; /* sequence number of last HV send */
+ u64 ack; /* last ack from HV */
+ struct hvc_struct *hp;
+ int in_start;
+ int in_end;
+ unsigned char in_buf[IN_BUF_SIZE];
+} port_info[VTTY_PORTS] = {
+ [ 0 ... VTTY_PORTS - 1 ] = {
+ .lp = HvLpIndexInvalid
+ }
+};
+
+#define viochar_is_console(pi) ((pi) == &port_info[0])
+
+static struct vio_device_id hvc_driver_table[] __devinitdata = {
+ {"serial", "IBM,iSeries-vty"},
+ { "", "" }
+};
+MODULE_DEVICE_TABLE(vio, hvc_driver_table);
+
+static void hvlog(char *fmt, ...)
+{
+ int i;
+ unsigned long flags;
+ va_list args;
+ static char buf[256];
+
+ spin_lock_irqsave(&consoleloglock, flags);
+ va_start(args, fmt);
+ i = vscnprintf(buf, sizeof(buf) - 1, fmt, args);
+ va_end(args);
+ buf[i++] = '\r';
+ HvCall_writeLogBuffer(buf, i);
+ spin_unlock_irqrestore(&consoleloglock, flags);
+}
+
+/*
+ * Initialize the common fields in a charLpEvent
+ */
+static void init_data_event(struct viocharlpevent *viochar, HvLpIndex lp)
+{
+ struct HvLpEvent *hev = &viochar->event;
+
+ memset(viochar, 0, sizeof(struct viocharlpevent));
+
+ hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK |
+ HV_LP_EVENT_INT;
+ hev->xType = HvLpEvent_Type_VirtualIo;
+ hev->xSubtype = viomajorsubtype_chario | viochardata;
+ hev->xSourceLp = HvLpConfig_getLpIndex();
+ hev->xTargetLp = lp;
+ hev->xSizeMinus1 = sizeof(struct viocharlpevent);
+ hev->xSourceInstanceId = viopath_sourceinst(lp);
+ hev->xTargetInstanceId = viopath_targetinst(lp);
+}
+
+static int get_chars(uint32_t vtermno, char *buf, int count)
+{
+ struct port_info *pi;
+ int n = 0;
+ unsigned long flags;
+
+ if (vtermno >= VTTY_PORTS)
+ return -EINVAL;
+ if (count == 0)
+ return 0;
+
+ pi = &port_info[vtermno];
+ spin_lock_irqsave(&consolelock, flags);
+
+ if (pi->in_end == 0)
+ goto done;
+
+ n = pi->in_end - pi->in_start;
+ if (n > count)
+ n = count;
+ memcpy(buf, &pi->in_buf[pi->in_start], n);
+ pi->in_start += n;
+ if (pi->in_start == pi->in_end) {
+ pi->in_start = 0;
+ pi->in_end = 0;
+ }
+done:
+ spin_unlock_irqrestore(&consolelock, flags);
+ return n;
+}
+
+static int put_chars(uint32_t vtermno, const char *buf, int count)
+{
+ struct viocharlpevent *viochar;
+ struct port_info *pi;
+ HvLpEvent_Rc hvrc;
+ unsigned long flags;
+ int sent = 0;
+
+ if (vtermno >= VTTY_PORTS)
+ return -EINVAL;
+
+ pi = &port_info[vtermno];
+
+ spin_lock_irqsave(&consolelock, flags);
+
+ if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) {
+ HvCall_writeLogBuffer(buf, count);
+ sent = count;
+ goto done;
+ }
+
+ viochar = vio_get_event_buffer(viomajorsubtype_chario);
+ if (viochar == NULL) {
+ hvlog("\n\rviocons: Can't get viochar buffer.");
+ goto done;
+ }
+
+ while ((count > 0) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
+ int len;
+
+ len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count;
+
+ if (viochar_is_console(pi))
+ HvCall_writeLogBuffer(buf, len);
+
+ init_data_event(viochar, pi->lp);
+
+ viochar->len = len;
+ viochar->event.xCorrelationToken = pi->seq++;
+ viochar->event.xSizeMinus1 =
+ offsetof(struct viocharlpevent, data) + len;
+
+ memcpy(viochar->data, buf, len);
+
+ hvrc = HvCallEvent_signalLpEvent(&viochar->event);
+ if (hvrc)
+ hvlog("\n\rerror sending event! return code %d\n\r",
+ (int)hvrc);
+ sent += len;
+ count -= len;
+ buf += len;
+ }
+
+ vio_free_event_buffer(viomajorsubtype_chario, viochar);
+done:
+ spin_unlock_irqrestore(&consolelock, flags);
+ return sent;
+}
+
+static const struct hv_ops hvc_get_put_ops = {
+ .get_chars = get_chars,
+ .put_chars = put_chars,
+ .notifier_add = notifier_add_irq,
+ .notifier_del = notifier_del_irq,
+ .notifier_hangup = notifier_hangup_irq,
+};
+
+static int __devinit hvc_vio_probe(struct vio_dev *vdev,
+ const struct vio_device_id *id)
+{
+ struct hvc_struct *hp;
+ struct port_info *pi;
+
+ /* probed with invalid parameters. */
+ if (!vdev || !id)
+ return -EPERM;
+
+ if (vdev->unit_address >= VTTY_PORTS)
+ return -ENODEV;
+
+ pi = &port_info[vdev->unit_address];
+
+ hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops,
+ VIOCHAR_MAX_DATA);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+ pi->hp = hp;
+ dev_set_drvdata(&vdev->dev, pi);
+
+ return 0;
+}
+
+static int __devexit hvc_vio_remove(struct vio_dev *vdev)
+{
+ struct port_info *pi = dev_get_drvdata(&vdev->dev);
+ struct hvc_struct *hp = pi->hp;
+
+ return hvc_remove(hp);
+}
+
+static struct vio_driver hvc_vio_driver = {
+ .id_table = hvc_driver_table,
+ .probe = hvc_vio_probe,
+ .remove = __devexit_p(hvc_vio_remove),
+ .driver = {
+ .name = hvc_driver_name,
+ .owner = THIS_MODULE,
+ }
+};
+
+static void hvc_open_event(struct HvLpEvent *event)
+{
+ unsigned long flags;
+ struct viocharlpevent *cevent = (struct viocharlpevent *)event;
+ u8 port = cevent->virtual_device;
+ struct port_info *pi;
+ int reject = 0;
+
+ if (hvlpevent_is_ack(event)) {
+ if (port >= VTTY_PORTS)
+ return;
+
+ spin_lock_irqsave(&consolelock, flags);
+
+ pi = &port_info[port];
+ if (event->xRc == HvLpEvent_Rc_Good) {
+ pi->seq = pi->ack = 0;
+ /*
+ * This line allows connections from the primary
+ * partition but once one is connected from the
+ * primary partition nothing short of a reboot
+ * of linux will allow access from the hosting
+ * partition again without a required iSeries fix.
+ */
+ pi->lp = event->xTargetLp;
+ }
+
+ spin_unlock_irqrestore(&consolelock, flags);
+ if (event->xRc != HvLpEvent_Rc_Good)
+ printk(KERN_WARNING
+ "hvc: handle_open_event: event->xRc == (%d).\n",
+ event->xRc);
+
+ if (event->xCorrelationToken != 0) {
+ atomic_t *aptr= (atomic_t *)event->xCorrelationToken;
+ atomic_set(aptr, 1);
+ } else
+ printk(KERN_WARNING
+ "hvc: weird...got open ack without atomic\n");
+ return;
+ }
+
+ /* This had better require an ack, otherwise complain */
+ if (!hvlpevent_need_ack(event)) {
+ printk(KERN_WARNING "hvc: viocharopen without ack bit!\n");
+ return;
+ }
+
+ spin_lock_irqsave(&consolelock, flags);
+
+ /* Make sure this is a good virtual tty */
+ if (port >= VTTY_PORTS) {
+ event->xRc = HvLpEvent_Rc_SubtypeError;
+ cevent->subtype_result_code = viorc_openRejected;
+ /*
+ * Flag state here since we can't printk while holding
+ * the consolelock spinlock.
+ */
+ reject = 1;
+ } else {
+ pi = &port_info[port];
+ if ((pi->lp != HvLpIndexInvalid) &&
+ (pi->lp != event->xSourceLp)) {
+ /*
+ * If this is tty is already connected to a different
+ * partition, fail.
+ */
+ event->xRc = HvLpEvent_Rc_SubtypeError;
+ cevent->subtype_result_code = viorc_openRejected;
+ reject = 2;
+ } else {
+ pi->lp = event->xSourceLp;
+ event->xRc = HvLpEvent_Rc_Good;
+ cevent->subtype_result_code = viorc_good;
+ pi->seq = pi->ack = 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&consolelock, flags);
+
+ if (reject == 1)
+ printk(KERN_WARNING "hvc: open rejected: bad virtual tty.\n");
+ else if (reject == 2)
+ printk(KERN_WARNING "hvc: open rejected: console in exclusive "
+ "use by another partition.\n");
+
+ /* Return the acknowledgement */
+ HvCallEvent_ackLpEvent(event);
+}
+
+/*
+ * Handle a close charLpEvent. This should ONLY be an Interrupt because the
+ * virtual console should never actually issue a close event to the hypervisor
+ * because the virtual console never goes away. A close event coming from the
+ * hypervisor simply means that there are no client consoles connected to the
+ * virtual console.
+ */
+static void hvc_close_event(struct HvLpEvent *event)
+{
+ unsigned long flags;
+ struct viocharlpevent *cevent = (struct viocharlpevent *)event;
+ u8 port = cevent->virtual_device;
+
+ if (!hvlpevent_is_int(event)) {
+ printk(KERN_WARNING
+ "hvc: got unexpected close acknowledgement\n");
+ return;
+ }
+
+ if (port >= VTTY_PORTS) {
+ printk(KERN_WARNING
+ "hvc: close message from invalid virtual device.\n");
+ return;
+ }
+
+ /* For closes, just mark the console partition invalid */
+ spin_lock_irqsave(&consolelock, flags);
+
+ if (port_info[port].lp == event->xSourceLp)
+ port_info[port].lp = HvLpIndexInvalid;
+
+ spin_unlock_irqrestore(&consolelock, flags);
+}
+
+static void hvc_data_event(struct HvLpEvent *event)
+{
+ unsigned long flags;
+ struct viocharlpevent *cevent = (struct viocharlpevent *)event;
+ struct port_info *pi;
+ int n;
+ u8 port = cevent->virtual_device;
+
+ if (port >= VTTY_PORTS) {
+ printk(KERN_WARNING "hvc: data on invalid virtual device %d\n",
+ port);
+ return;
+ }
+ if (cevent->len == 0)
+ return;
+
+ /*
+ * Change 05/01/2003 - Ryan Arnold: If a partition other than
+ * the current exclusive partition tries to send us data
+ * events then just drop them on the floor because we don't
+ * want his stinking data. He isn't authorized to receive
+ * data because he wasn't the first one to get the console,
+ * therefore he shouldn't be allowed to send data either.
+ * This will work without an iSeries fix.
+ */
+ pi = &port_info[port];
+ if (pi->lp != event->xSourceLp)
+ return;
+
+ spin_lock_irqsave(&consolelock, flags);
+
+ n = IN_BUF_SIZE - pi->in_end;
+ if (n > cevent->len)
+ n = cevent->len;
+ if (n > 0) {
+ memcpy(&pi->in_buf[pi->in_end], cevent->data, n);
+ pi->in_end += n;
+ }
+ spin_unlock_irqrestore(&consolelock, flags);
+ if (n == 0)
+ printk(KERN_WARNING "hvc: input buffer overflow\n");
+}
+
+static void hvc_ack_event(struct HvLpEvent *event)
+{
+ struct viocharlpevent *cevent = (struct viocharlpevent *)event;
+ unsigned long flags;
+ u8 port = cevent->virtual_device;
+
+ if (port >= VTTY_PORTS) {
+ printk(KERN_WARNING "hvc: data on invalid virtual device\n");
+ return;
+ }
+
+ spin_lock_irqsave(&consolelock, flags);
+ port_info[port].ack = event->xCorrelationToken;
+ spin_unlock_irqrestore(&consolelock, flags);
+}
+
+static void hvc_config_event(struct HvLpEvent *event)
+{
+ struct viocharlpevent *cevent = (struct viocharlpevent *)event;
+
+ if (cevent->data[0] == 0x01)
+ printk(KERN_INFO "hvc: window resized to %d: %d: %d: %d\n",
+ cevent->data[1], cevent->data[2],
+ cevent->data[3], cevent->data[4]);
+ else
+ printk(KERN_WARNING "hvc: unknown config event\n");
+}
+
+static void hvc_handle_event(struct HvLpEvent *event)
+{
+ int charminor;
+
+ if (event == NULL)
+ return;
+
+ charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK;
+ switch (charminor) {
+ case viocharopen:
+ hvc_open_event(event);
+ break;
+ case viocharclose:
+ hvc_close_event(event);
+ break;
+ case viochardata:
+ hvc_data_event(event);
+ break;
+ case viocharack:
+ hvc_ack_event(event);
+ break;
+ case viocharconfig:
+ hvc_config_event(event);
+ break;
+ default:
+ if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) {
+ event->xRc = HvLpEvent_Rc_InvalidSubtype;
+ HvCallEvent_ackLpEvent(event);
+ }
+ }
+}
+
+static int __init send_open(HvLpIndex remoteLp, void *sem)
+{
+ return HvCallEvent_signalLpEventFast(remoteLp,
+ HvLpEvent_Type_VirtualIo,
+ viomajorsubtype_chario | viocharopen,
+ HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
+ viopath_sourceinst(remoteLp),
+ viopath_targetinst(remoteLp),
+ (u64)(unsigned long)sem, VIOVERSION << 16,
+ 0, 0, 0, 0);
+}
+
+static int __init hvc_vio_init(void)
+{
+ atomic_t wait_flag;
+ int rc;
+
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EIO;
+
+ /* +2 for fudge */
+ rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
+ viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
+ if (rc)
+ printk(KERN_WARNING "hvc: error opening to primary %d\n", rc);
+
+ if (viopath_hostLp == HvLpIndexInvalid)
+ vio_set_hostlp();
+
+ /*
+ * And if the primary is not the same as the hosting LP, open to the
+ * hosting lp
+ */
+ if ((viopath_hostLp != HvLpIndexInvalid) &&
+ (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) {
+ printk(KERN_INFO "hvc: open path to hosting (%d)\n",
+ viopath_hostLp);
+ rc = viopath_open(viopath_hostLp, viomajorsubtype_chario,
+ VIOCHAR_WINDOW + 2); /* +2 for fudge */
+ if (rc)
+ printk(KERN_WARNING
+ "error opening to partition %d: %d\n",
+ viopath_hostLp, rc);
+ }
+
+ if (vio_setHandler(viomajorsubtype_chario, hvc_handle_event) < 0)
+ printk(KERN_WARNING
+ "hvc: error seting handler for console events!\n");
+
+ /*
+ * First, try to open the console to the hosting lp.
+ * Wait on a semaphore for the response.
+ */
+ atomic_set(&wait_flag, 0);
+ if ((viopath_isactive(viopath_hostLp)) &&
+ (send_open(viopath_hostLp, &wait_flag) == 0)) {
+ printk(KERN_INFO "hvc: hosting partition %d\n", viopath_hostLp);
+ while (atomic_read(&wait_flag) == 0)
+ mb();
+ atomic_set(&wait_flag, 0);
+ }
+
+ /*
+ * If we don't have an active console, try the primary
+ */
+ if ((!viopath_isactive(port_info[0].lp)) &&
+ (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) &&
+ (send_open(HvLpConfig_getPrimaryLpIndex(), &wait_flag) == 0)) {
+ printk(KERN_INFO "hvc: opening console to primary partition\n");
+ while (atomic_read(&wait_flag) == 0)
+ mb();
+ }
+
+ /* Register as a vio device to receive callbacks */
+ rc = vio_register_driver(&hvc_vio_driver);
+
+ return rc;
+}
+module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */
+
+static void __exit hvc_vio_exit(void)
+{
+ vio_unregister_driver(&hvc_vio_driver);
+}
+module_exit(hvc_vio_exit);
+
+/* the device tree order defines our numbering */
+static int __init hvc_find_vtys(void)
+{
+ struct device_node *vty;
+ int num_found = 0;
+
+ for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
+ vty = of_find_node_by_name(vty, "vty")) {
+ const uint32_t *vtermno;
+
+ /* We have statically defined space for only a certain number
+ * of console adapters.
+ */
+ if ((num_found >= MAX_NR_HVC_CONSOLES) ||
+ (num_found >= VTTY_PORTS)) {
+ of_node_put(vty);
+ break;
+ }
+
+ vtermno = of_get_property(vty, "reg", NULL);
+ if (!vtermno)
+ continue;
+
+ if (!of_device_is_compatible(vty, "IBM,iSeries-vty"))
+ continue;
+
+ if (num_found == 0)
+ add_preferred_console("hvc", 0, NULL);
+ hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops);
+ ++num_found;
+ }
+
+ return num_found;
+}
+console_initcall(hvc_find_vtys);
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
new file mode 100644
index 000000000000..c3425bb3a1f6
--- /dev/null
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -0,0 +1,1337 @@
+/*
+ * hvc_iucv.c - z/VM IUCV hypervisor console (HVC) device driver
+ *
+ * This HVC device driver provides terminal access using
+ * z/VM IUCV communication paths.
+ *
+ * Copyright IBM Corp. 2008, 2009
+ *
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ */
+#define KMSG_COMPONENT "hvc_iucv"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/ebcdic.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mempool.h>
+#include <linux/moduleparam.h>
+#include <linux/tty.h>
+#include <linux/wait.h>
+#include <net/iucv/iucv.h>
+
+#include "hvc_console.h"
+
+
+/* General device driver settings */
+#define HVC_IUCV_MAGIC 0xc9e4c3e5
+#define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS
+#define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4)
+
+/* IUCV TTY message */
+#define MSG_VERSION 0x02 /* Message version */
+#define MSG_TYPE_ERROR 0x01 /* Error message */
+#define MSG_TYPE_TERMENV 0x02 /* Terminal environment variable */
+#define MSG_TYPE_TERMIOS 0x04 /* Terminal IO struct update */
+#define MSG_TYPE_WINSIZE 0x08 /* Terminal window size update */
+#define MSG_TYPE_DATA 0x10 /* Terminal data */
+
+struct iucv_tty_msg {
+ u8 version; /* Message version */
+ u8 type; /* Message type */
+#define MSG_MAX_DATALEN ((u16)(~0))
+ u16 datalen; /* Payload length */
+ u8 data[]; /* Payload buffer */
+} __attribute__((packed));
+#define MSG_SIZE(s) ((s) + offsetof(struct iucv_tty_msg, data))
+
+enum iucv_state_t {
+ IUCV_DISCONN = 0,
+ IUCV_CONNECTED = 1,
+ IUCV_SEVERED = 2,
+};
+
+enum tty_state_t {
+ TTY_CLOSED = 0,
+ TTY_OPENED = 1,
+};
+
+struct hvc_iucv_private {
+ struct hvc_struct *hvc; /* HVC struct reference */
+ u8 srv_name[8]; /* IUCV service name (ebcdic) */
+ unsigned char is_console; /* Linux console usage flag */
+ enum iucv_state_t iucv_state; /* IUCV connection status */
+ enum tty_state_t tty_state; /* TTY status */
+ struct iucv_path *path; /* IUCV path pointer */
+ spinlock_t lock; /* hvc_iucv_private lock */
+#define SNDBUF_SIZE (PAGE_SIZE) /* must be < MSG_MAX_DATALEN */
+ void *sndbuf; /* send buffer */
+ size_t sndbuf_len; /* length of send buffer */
+#define QUEUE_SNDBUF_DELAY (HZ / 25)
+ struct delayed_work sndbuf_work; /* work: send iucv msg(s) */
+ wait_queue_head_t sndbuf_waitq; /* wait for send completion */
+ struct list_head tty_outqueue; /* outgoing IUCV messages */
+ struct list_head tty_inqueue; /* incoming IUCV messages */
+ struct device *dev; /* device structure */
+};
+
+struct iucv_tty_buffer {
+ struct list_head list; /* list pointer */
+ struct iucv_message msg; /* store an IUCV message */
+ size_t offset; /* data buffer offset */
+ struct iucv_tty_msg *mbuf; /* buffer to store input/output data */
+};
+
+/* IUCV callback handler */
+static int hvc_iucv_path_pending(struct iucv_path *, u8[8], u8[16]);
+static void hvc_iucv_path_severed(struct iucv_path *, u8[16]);
+static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *);
+static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *);
+
+
+/* Kernel module parameter: use one terminal device as default */
+static unsigned long hvc_iucv_devices = 1;
+
+/* Array of allocated hvc iucv tty lines... */
+static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
+#define IUCV_HVC_CON_IDX (0)
+/* List of z/VM user ID filter entries (struct iucv_vmid_filter) */
+#define MAX_VMID_FILTER (500)
+static size_t hvc_iucv_filter_size;
+static void *hvc_iucv_filter;
+static const char *hvc_iucv_filter_string;
+static DEFINE_RWLOCK(hvc_iucv_filter_lock);
+
+/* Kmem cache and mempool for iucv_tty_buffer elements */
+static struct kmem_cache *hvc_iucv_buffer_cache;
+static mempool_t *hvc_iucv_mempool;
+
+/* IUCV handler callback functions */
+static struct iucv_handler hvc_iucv_handler = {
+ .path_pending = hvc_iucv_path_pending,
+ .path_severed = hvc_iucv_path_severed,
+ .message_complete = hvc_iucv_msg_complete,
+ .message_pending = hvc_iucv_msg_pending,
+};
+
+
+/**
+ * hvc_iucv_get_private() - Return a struct hvc_iucv_private instance.
+ * @num: The HVC virtual terminal number (vtermno)
+ *
+ * This function returns the struct hvc_iucv_private instance that corresponds
+ * to the HVC virtual terminal number specified as parameter @num.
+ */
+struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
+{
+ if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices))
+ return NULL;
+ return hvc_iucv_table[num - HVC_IUCV_MAGIC];
+}
+
+/**
+ * alloc_tty_buffer() - Return a new struct iucv_tty_buffer element.
+ * @size: Size of the internal buffer used to store data.
+ * @flags: Memory allocation flags passed to mempool.
+ *
+ * This function allocates a new struct iucv_tty_buffer element and, optionally,
+ * allocates an internal data buffer with the specified size @size.
+ * The internal data buffer is always allocated with GFP_DMA which is
+ * required for receiving and sending data with IUCV.
+ * Note: The total message size arises from the internal buffer size and the
+ * members of the iucv_tty_msg structure.
+ * The function returns NULL if memory allocation has failed.
+ */
+static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags)
+{
+ struct iucv_tty_buffer *bufp;
+
+ bufp = mempool_alloc(hvc_iucv_mempool, flags);
+ if (!bufp)
+ return NULL;
+ memset(bufp, 0, sizeof(*bufp));
+
+ if (size > 0) {
+ bufp->msg.length = MSG_SIZE(size);
+ bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA);
+ if (!bufp->mbuf) {
+ mempool_free(bufp, hvc_iucv_mempool);
+ return NULL;
+ }
+ bufp->mbuf->version = MSG_VERSION;
+ bufp->mbuf->type = MSG_TYPE_DATA;
+ bufp->mbuf->datalen = (u16) size;
+ }
+ return bufp;
+}
+
+/**
+ * destroy_tty_buffer() - destroy struct iucv_tty_buffer element.
+ * @bufp: Pointer to a struct iucv_tty_buffer element, SHALL NOT be NULL.
+ */
+static void destroy_tty_buffer(struct iucv_tty_buffer *bufp)
+{
+ kfree(bufp->mbuf);
+ mempool_free(bufp, hvc_iucv_mempool);
+}
+
+/**
+ * destroy_tty_buffer_list() - call destroy_tty_buffer() for each list element.
+ * @list: List containing struct iucv_tty_buffer elements.
+ */
+static void destroy_tty_buffer_list(struct list_head *list)
+{
+ struct iucv_tty_buffer *ent, *next;
+
+ list_for_each_entry_safe(ent, next, list, list) {
+ list_del(&ent->list);
+ destroy_tty_buffer(ent);
+ }
+}
+
+/**
+ * hvc_iucv_write() - Receive IUCV message & write data to HVC buffer.
+ * @priv: Pointer to struct hvc_iucv_private
+ * @buf: HVC buffer for writing received terminal data.
+ * @count: HVC buffer size.
+ * @has_more_data: Pointer to an int variable.
+ *
+ * The function picks up pending messages from the input queue and receives
+ * the message data that is then written to the specified buffer @buf.
+ * If the buffer size @count is less than the data message size, the
+ * message is kept on the input queue and @has_more_data is set to 1.
+ * If all message data has been written, the message is removed from
+ * the input queue.
+ *
+ * The function returns the number of bytes written to the terminal, zero if
+ * there are no pending data messages available or if there is no established
+ * IUCV path.
+ * If the IUCV path has been severed, then -EPIPE is returned to cause a
+ * hang up (that is issued by the HVC layer).
+ */
+static int hvc_iucv_write(struct hvc_iucv_private *priv,
+ char *buf, int count, int *has_more_data)
+{
+ struct iucv_tty_buffer *rb;
+ int written;
+ int rc;
+
+ /* immediately return if there is no IUCV connection */
+ if (priv->iucv_state == IUCV_DISCONN)
+ return 0;
+
+ /* if the IUCV path has been severed, return -EPIPE to inform the
+ * HVC layer to hang up the tty device. */
+ if (priv->iucv_state == IUCV_SEVERED)
+ return -EPIPE;
+
+ /* check if there are pending messages */
+ if (list_empty(&priv->tty_inqueue))
+ return 0;
+
+ /* receive an iucv message and flip data to the tty (ldisc) */
+ rb = list_first_entry(&priv->tty_inqueue, struct iucv_tty_buffer, list);
+
+ written = 0;
+ if (!rb->mbuf) { /* message not yet received ... */
+ /* allocate mem to store msg data; if no memory is available
+ * then leave the buffer on the list and re-try later */
+ rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA);
+ if (!rb->mbuf)
+ return -ENOMEM;
+
+ rc = __iucv_message_receive(priv->path, &rb->msg, 0,
+ rb->mbuf, rb->msg.length, NULL);
+ switch (rc) {
+ case 0: /* Successful */
+ break;
+ case 2: /* No message found */
+ case 9: /* Message purged */
+ break;
+ default:
+ written = -EIO;
+ }
+ /* remove buffer if an error has occured or received data
+ * is not correct */
+ if (rc || (rb->mbuf->version != MSG_VERSION) ||
+ (rb->msg.length != MSG_SIZE(rb->mbuf->datalen)))
+ goto out_remove_buffer;
+ }
+
+ switch (rb->mbuf->type) {
+ case MSG_TYPE_DATA:
+ written = min_t(int, rb->mbuf->datalen - rb->offset, count);
+ memcpy(buf, rb->mbuf->data + rb->offset, written);
+ if (written < (rb->mbuf->datalen - rb->offset)) {
+ rb->offset += written;
+ *has_more_data = 1;
+ goto out_written;
+ }
+ break;
+
+ case MSG_TYPE_WINSIZE:
+ if (rb->mbuf->datalen != sizeof(struct winsize))
+ break;
+ /* The caller must ensure that the hvc is locked, which
+ * is the case when called from hvc_iucv_get_chars() */
+ __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
+ break;
+
+ case MSG_TYPE_ERROR: /* ignored ... */
+ case MSG_TYPE_TERMENV: /* ignored ... */
+ case MSG_TYPE_TERMIOS: /* ignored ... */
+ break;
+ }
+
+out_remove_buffer:
+ list_del(&rb->list);
+ destroy_tty_buffer(rb);
+ *has_more_data = !list_empty(&priv->tty_inqueue);
+
+out_written:
+ return written;
+}
+
+/**
+ * hvc_iucv_get_chars() - HVC get_chars operation.
+ * @vtermno: HVC virtual terminal number.
+ * @buf: Pointer to a buffer to store data
+ * @count: Size of buffer available for writing
+ *
+ * The HVC thread calls this method to read characters from the back-end.
+ * If an IUCV communication path has been established, pending IUCV messages
+ * are received and data is copied into buffer @buf up to @count bytes.
+ *
+ * Locking: The routine gets called under an irqsave() spinlock; and
+ * the routine locks the struct hvc_iucv_private->lock to call
+ * helper functions.
+ */
+static int hvc_iucv_get_chars(uint32_t vtermno, char *buf, int count)
+{
+ struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno);
+ int written;
+ int has_more_data;
+
+ if (count <= 0)
+ return 0;
+
+ if (!priv)
+ return -ENODEV;
+
+ spin_lock(&priv->lock);
+ has_more_data = 0;
+ written = hvc_iucv_write(priv, buf, count, &has_more_data);
+ spin_unlock(&priv->lock);
+
+ /* if there are still messages on the queue... schedule another run */
+ if (has_more_data)
+ hvc_kick();
+
+ return written;
+}
+
+/**
+ * hvc_iucv_queue() - Buffer terminal data for sending.
+ * @priv: Pointer to struct hvc_iucv_private instance.
+ * @buf: Buffer containing data to send.
+ * @count: Size of buffer and amount of data to send.
+ *
+ * The function queues data for sending. To actually send the buffered data,
+ * a work queue function is scheduled (with QUEUE_SNDBUF_DELAY).
+ * The function returns the number of data bytes that has been buffered.
+ *
+ * If the device is not connected, data is ignored and the function returns
+ * @count.
+ * If the buffer is full, the function returns 0.
+ * If an existing IUCV communicaton path has been severed, -EPIPE is returned
+ * (that can be passed to HVC layer to cause a tty hangup).
+ */
+static int hvc_iucv_queue(struct hvc_iucv_private *priv, const char *buf,
+ int count)
+{
+ size_t len;
+
+ if (priv->iucv_state == IUCV_DISCONN)
+ return count; /* ignore data */
+
+ if (priv->iucv_state == IUCV_SEVERED)
+ return -EPIPE;
+
+ len = min_t(size_t, count, SNDBUF_SIZE - priv->sndbuf_len);
+ if (!len)
+ return 0;
+
+ memcpy(priv->sndbuf + priv->sndbuf_len, buf, len);
+ priv->sndbuf_len += len;
+
+ if (priv->iucv_state == IUCV_CONNECTED)
+ schedule_delayed_work(&priv->sndbuf_work, QUEUE_SNDBUF_DELAY);
+
+ return len;
+}
+
+/**
+ * hvc_iucv_send() - Send an IUCV message containing terminal data.
+ * @priv: Pointer to struct hvc_iucv_private instance.
+ *
+ * If an IUCV communication path has been established, the buffered output data
+ * is sent via an IUCV message and the number of bytes sent is returned.
+ * Returns 0 if there is no established IUCV communication path or
+ * -EPIPE if an existing IUCV communicaton path has been severed.
+ */
+static int hvc_iucv_send(struct hvc_iucv_private *priv)
+{
+ struct iucv_tty_buffer *sb;
+ int rc, len;
+
+ if (priv->iucv_state == IUCV_SEVERED)
+ return -EPIPE;
+
+ if (priv->iucv_state == IUCV_DISCONN)
+ return -EIO;
+
+ if (!priv->sndbuf_len)
+ return 0;
+
+ /* allocate internal buffer to store msg data and also compute total
+ * message length */
+ sb = alloc_tty_buffer(priv->sndbuf_len, GFP_ATOMIC);
+ if (!sb)
+ return -ENOMEM;
+
+ memcpy(sb->mbuf->data, priv->sndbuf, priv->sndbuf_len);
+ sb->mbuf->datalen = (u16) priv->sndbuf_len;
+ sb->msg.length = MSG_SIZE(sb->mbuf->datalen);
+
+ list_add_tail(&sb->list, &priv->tty_outqueue);
+
+ rc = __iucv_message_send(priv->path, &sb->msg, 0, 0,
+ (void *) sb->mbuf, sb->msg.length);
+ if (rc) {
+ /* drop the message here; however we might want to handle
+ * 0x03 (msg limit reached) by trying again... */
+ list_del(&sb->list);
+ destroy_tty_buffer(sb);
+ }
+ len = priv->sndbuf_len;
+ priv->sndbuf_len = 0;
+
+ return len;
+}
+
+/**
+ * hvc_iucv_sndbuf_work() - Send buffered data over IUCV
+ * @work: Work structure.
+ *
+ * This work queue function sends buffered output data over IUCV and,
+ * if not all buffered data could be sent, reschedules itself.
+ */
+static void hvc_iucv_sndbuf_work(struct work_struct *work)
+{
+ struct hvc_iucv_private *priv;
+
+ priv = container_of(work, struct hvc_iucv_private, sndbuf_work.work);
+ if (!priv)
+ return;
+
+ spin_lock_bh(&priv->lock);
+ hvc_iucv_send(priv);
+ spin_unlock_bh(&priv->lock);
+}
+
+/**
+ * hvc_iucv_put_chars() - HVC put_chars operation.
+ * @vtermno: HVC virtual terminal number.
+ * @buf: Pointer to an buffer to read data from
+ * @count: Size of buffer available for reading
+ *
+ * The HVC thread calls this method to write characters to the back-end.
+ * The function calls hvc_iucv_queue() to queue terminal data for sending.
+ *
+ * Locking: The method gets called under an irqsave() spinlock; and
+ * locks struct hvc_iucv_private->lock.
+ */
+static int hvc_iucv_put_chars(uint32_t vtermno, const char *buf, int count)
+{
+ struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno);
+ int queued;
+
+ if (count <= 0)
+ return 0;
+
+ if (!priv)
+ return -ENODEV;
+
+ spin_lock(&priv->lock);
+ queued = hvc_iucv_queue(priv, buf, count);
+ spin_unlock(&priv->lock);
+
+ return queued;
+}
+
+/**
+ * hvc_iucv_notifier_add() - HVC notifier for opening a TTY for the first time.
+ * @hp: Pointer to the HVC device (struct hvc_struct)
+ * @id: Additional data (originally passed to hvc_alloc): the index of an struct
+ * hvc_iucv_private instance.
+ *
+ * The function sets the tty state to TTY_OPENED for the struct hvc_iucv_private
+ * instance that is derived from @id. Always returns 0.
+ *
+ * Locking: struct hvc_iucv_private->lock, spin_lock_bh
+ */
+static int hvc_iucv_notifier_add(struct hvc_struct *hp, int id)
+{
+ struct hvc_iucv_private *priv;
+
+ priv = hvc_iucv_get_private(id);
+ if (!priv)
+ return 0;
+
+ spin_lock_bh(&priv->lock);
+ priv->tty_state = TTY_OPENED;
+ spin_unlock_bh(&priv->lock);
+
+ return 0;
+}
+
+/**
+ * hvc_iucv_cleanup() - Clean up and reset a z/VM IUCV HVC instance.
+ * @priv: Pointer to the struct hvc_iucv_private instance.
+ */
+static void hvc_iucv_cleanup(struct hvc_iucv_private *priv)
+{
+ destroy_tty_buffer_list(&priv->tty_outqueue);
+ destroy_tty_buffer_list(&priv->tty_inqueue);
+
+ priv->tty_state = TTY_CLOSED;
+ priv->iucv_state = IUCV_DISCONN;
+
+ priv->sndbuf_len = 0;
+}
+
+/**
+ * tty_outqueue_empty() - Test if the tty outq is empty
+ * @priv: Pointer to struct hvc_iucv_private instance.
+ */
+static inline int tty_outqueue_empty(struct hvc_iucv_private *priv)
+{
+ int rc;
+
+ spin_lock_bh(&priv->lock);
+ rc = list_empty(&priv->tty_outqueue);
+ spin_unlock_bh(&priv->lock);
+
+ return rc;
+}
+
+/**
+ * flush_sndbuf_sync() - Flush send buffer and wait for completion
+ * @priv: Pointer to struct hvc_iucv_private instance.
+ *
+ * The routine cancels a pending sndbuf work, calls hvc_iucv_send()
+ * to flush any buffered terminal output data and waits for completion.
+ */
+static void flush_sndbuf_sync(struct hvc_iucv_private *priv)
+{
+ int sync_wait;
+
+ cancel_delayed_work_sync(&priv->sndbuf_work);
+
+ spin_lock_bh(&priv->lock);
+ hvc_iucv_send(priv); /* force sending buffered data */
+ sync_wait = !list_empty(&priv->tty_outqueue); /* anything queued ? */
+ spin_unlock_bh(&priv->lock);
+
+ if (sync_wait)
+ wait_event_timeout(priv->sndbuf_waitq,
+ tty_outqueue_empty(priv), HZ/10);
+}
+
+/**
+ * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up
+ * @priv: Pointer to hvc_iucv_private structure
+ *
+ * This routine severs an existing IUCV communication path and hangs
+ * up the underlying HVC terminal device.
+ * The hang-up occurs only if an IUCV communication path is established;
+ * otherwise there is no need to hang up the terminal device.
+ *
+ * The IUCV HVC hang-up is separated into two steps:
+ * 1. After the IUCV path has been severed, the iucv_state is set to
+ * IUCV_SEVERED.
+ * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the
+ * IUCV_SEVERED state causes the tty hang-up in the HVC layer.
+ *
+ * If the tty has not yet been opened, clean up the hvc_iucv_private
+ * structure to allow re-connects.
+ * If the tty has been opened, let get_chars() return -EPIPE to signal
+ * the HVC layer to hang up the tty and, if so, wake up the HVC thread
+ * to call get_chars()...
+ *
+ * Special notes on hanging up a HVC terminal instantiated as console:
+ * Hang-up: 1. do_tty_hangup() replaces file ops (= hung_up_tty_fops)
+ * 2. do_tty_hangup() calls tty->ops->close() for console_filp
+ * => no hangup notifier is called by HVC (default)
+ * 2. hvc_close() returns because of tty_hung_up_p(filp)
+ * => no delete notifier is called!
+ * Finally, the back-end is not being notified, thus, the tty session is
+ * kept active (TTY_OPEN) to be ready for re-connects.
+ *
+ * Locking: spin_lock(&priv->lock) w/o disabling bh
+ */
+static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
+{
+ struct iucv_path *path;
+
+ path = NULL;
+ spin_lock(&priv->lock);
+ if (priv->iucv_state == IUCV_CONNECTED) {
+ path = priv->path;
+ priv->path = NULL;
+ priv->iucv_state = IUCV_SEVERED;
+ if (priv->tty_state == TTY_CLOSED)
+ hvc_iucv_cleanup(priv);
+ else
+ /* console is special (see above) */
+ if (priv->is_console) {
+ hvc_iucv_cleanup(priv);
+ priv->tty_state = TTY_OPENED;
+ } else
+ hvc_kick();
+ }
+ spin_unlock(&priv->lock);
+
+ /* finally sever path (outside of priv->lock due to lock ordering) */
+ if (path) {
+ iucv_path_sever(path, NULL);
+ iucv_path_free(path);
+ }
+}
+
+/**
+ * hvc_iucv_notifier_hangup() - HVC notifier for TTY hangups.
+ * @hp: Pointer to the HVC device (struct hvc_struct)
+ * @id: Additional data (originally passed to hvc_alloc):
+ * the index of an struct hvc_iucv_private instance.
+ *
+ * This routine notifies the HVC back-end that a tty hangup (carrier loss,
+ * virtual or otherwise) has occured.
+ * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup())
+ * to keep an existing IUCV communication path established.
+ * (Background: vhangup() is called from user space (by getty or login) to
+ * disable writing to the tty by other applications).
+ * If the tty has been opened and an established IUCV path has been severed
+ * (we caused the tty hangup), the function calls hvc_iucv_cleanup().
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id)
+{
+ struct hvc_iucv_private *priv;
+
+ priv = hvc_iucv_get_private(id);
+ if (!priv)
+ return;
+
+ flush_sndbuf_sync(priv);
+
+ spin_lock_bh(&priv->lock);
+ /* NOTE: If the hangup was scheduled by ourself (from the iucv
+ * path_servered callback [IUCV_SEVERED]), we have to clean up
+ * our structure and to set state to TTY_CLOSED.
+ * If the tty was hung up otherwise (e.g. vhangup()), then we
+ * ignore this hangup and keep an established IUCV path open...
+ * (...the reason is that we are not able to connect back to the
+ * client if we disconnect on hang up) */
+ priv->tty_state = TTY_CLOSED;
+
+ if (priv->iucv_state == IUCV_SEVERED)
+ hvc_iucv_cleanup(priv);
+ spin_unlock_bh(&priv->lock);
+}
+
+/**
+ * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time.
+ * @hp: Pointer to the HVC device (struct hvc_struct)
+ * @id: Additional data (originally passed to hvc_alloc):
+ * the index of an struct hvc_iucv_private instance.
+ *
+ * This routine notifies the HVC back-end that the last tty device fd has been
+ * closed. The function calls hvc_iucv_cleanup() to clean up the struct
+ * hvc_iucv_private instance.
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id)
+{
+ struct hvc_iucv_private *priv;
+ struct iucv_path *path;
+
+ priv = hvc_iucv_get_private(id);
+ if (!priv)
+ return;
+
+ flush_sndbuf_sync(priv);
+
+ spin_lock_bh(&priv->lock);
+ path = priv->path; /* save reference to IUCV path */
+ priv->path = NULL;
+ hvc_iucv_cleanup(priv);
+ spin_unlock_bh(&priv->lock);
+
+ /* sever IUCV path outside of priv->lock due to lock ordering of:
+ * priv->lock <--> iucv_table_lock */
+ if (path) {
+ iucv_path_sever(path, NULL);
+ iucv_path_free(path);
+ }
+}
+
+/**
+ * hvc_iucv_filter_connreq() - Filter connection request based on z/VM user ID
+ * @ipvmid: Originating z/VM user ID (right padded with blanks)
+ *
+ * Returns 0 if the z/VM user ID @ipvmid is allowed to connection, otherwise
+ * non-zero.
+ */
+static int hvc_iucv_filter_connreq(u8 ipvmid[8])
+{
+ size_t i;
+
+ /* Note: default policy is ACCEPT if no filter is set */
+ if (!hvc_iucv_filter_size)
+ return 0;
+
+ for (i = 0; i < hvc_iucv_filter_size; i++)
+ if (0 == memcmp(ipvmid, hvc_iucv_filter + (8 * i), 8))
+ return 0;
+ return 1;
+}
+
+/**
+ * hvc_iucv_path_pending() - IUCV handler to process a connection request.
+ * @path: Pending path (struct iucv_path)
+ * @ipvmid: z/VM system identifier of originator
+ * @ipuser: User specified data for this path
+ * (AF_IUCV: port/service name and originator port)
+ *
+ * The function uses the @ipuser data to determine if the pending path belongs
+ * to a terminal managed by this device driver.
+ * If the path belongs to this driver, ensure that the terminal is not accessed
+ * multiple times (only one connection to a terminal is allowed).
+ * If the terminal is not yet connected, the pending path is accepted and is
+ * associated to the appropriate struct hvc_iucv_private instance.
+ *
+ * Returns 0 if @path belongs to a terminal managed by the this device driver;
+ * otherwise returns -ENODEV in order to dispatch this path to other handlers.
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static int hvc_iucv_path_pending(struct iucv_path *path,
+ u8 ipvmid[8], u8 ipuser[16])
+{
+ struct hvc_iucv_private *priv;
+ u8 nuser_data[16];
+ u8 vm_user_id[9];
+ int i, rc;
+
+ priv = NULL;
+ for (i = 0; i < hvc_iucv_devices; i++)
+ if (hvc_iucv_table[i] &&
+ (0 == memcmp(hvc_iucv_table[i]->srv_name, ipuser, 8))) {
+ priv = hvc_iucv_table[i];
+ break;
+ }
+ if (!priv)
+ return -ENODEV;
+
+ /* Enforce that ipvmid is allowed to connect to us */
+ read_lock(&hvc_iucv_filter_lock);
+ rc = hvc_iucv_filter_connreq(ipvmid);
+ read_unlock(&hvc_iucv_filter_lock);
+ if (rc) {
+ iucv_path_sever(path, ipuser);
+ iucv_path_free(path);
+ memcpy(vm_user_id, ipvmid, 8);
+ vm_user_id[8] = 0;
+ pr_info("A connection request from z/VM user ID %s "
+ "was refused\n", vm_user_id);
+ return 0;
+ }
+
+ spin_lock(&priv->lock);
+
+ /* If the terminal is already connected or being severed, then sever
+ * this path to enforce that there is only ONE established communication
+ * path per terminal. */
+ if (priv->iucv_state != IUCV_DISCONN) {
+ iucv_path_sever(path, ipuser);
+ iucv_path_free(path);
+ goto out_path_handled;
+ }
+
+ /* accept path */
+ memcpy(nuser_data, ipuser + 8, 8); /* remote service (for af_iucv) */
+ memcpy(nuser_data + 8, ipuser, 8); /* local service (for af_iucv) */
+ path->msglim = 0xffff; /* IUCV MSGLIMIT */
+ path->flags &= ~IUCV_IPRMDATA; /* TODO: use IUCV_IPRMDATA */
+ rc = iucv_path_accept(path, &hvc_iucv_handler, nuser_data, priv);
+ if (rc) {
+ iucv_path_sever(path, ipuser);
+ iucv_path_free(path);
+ goto out_path_handled;
+ }
+ priv->path = path;
+ priv->iucv_state = IUCV_CONNECTED;
+
+ /* flush buffered output data... */
+ schedule_delayed_work(&priv->sndbuf_work, 5);
+
+out_path_handled:
+ spin_unlock(&priv->lock);
+ return 0;
+}
+
+/**
+ * hvc_iucv_path_severed() - IUCV handler to process a path sever.
+ * @path: Pending path (struct iucv_path)
+ * @ipuser: User specified data for this path
+ * (AF_IUCV: port/service name and originator port)
+ *
+ * This function calls the hvc_iucv_hangup() function for the
+ * respective IUCV HVC terminal.
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16])
+{
+ struct hvc_iucv_private *priv = path->private;
+
+ hvc_iucv_hangup(priv);
+}
+
+/**
+ * hvc_iucv_msg_pending() - IUCV handler to process an incoming IUCV message.
+ * @path: Pending path (struct iucv_path)
+ * @msg: Pointer to the IUCV message
+ *
+ * The function puts an incoming message on the input queue for later
+ * processing (by hvc_iucv_get_chars() / hvc_iucv_write()).
+ * If the tty has not yet been opened, the message is rejected.
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static void hvc_iucv_msg_pending(struct iucv_path *path,
+ struct iucv_message *msg)
+{
+ struct hvc_iucv_private *priv = path->private;
+ struct iucv_tty_buffer *rb;
+
+ /* reject messages that exceed max size of iucv_tty_msg->datalen */
+ if (msg->length > MSG_SIZE(MSG_MAX_DATALEN)) {
+ iucv_message_reject(path, msg);
+ return;
+ }
+
+ spin_lock(&priv->lock);
+
+ /* reject messages if tty has not yet been opened */
+ if (priv->tty_state == TTY_CLOSED) {
+ iucv_message_reject(path, msg);
+ goto unlock_return;
+ }
+
+ /* allocate tty buffer to save iucv msg only */
+ rb = alloc_tty_buffer(0, GFP_ATOMIC);
+ if (!rb) {
+ iucv_message_reject(path, msg);
+ goto unlock_return; /* -ENOMEM */
+ }
+ rb->msg = *msg;
+
+ list_add_tail(&rb->list, &priv->tty_inqueue);
+
+ hvc_kick(); /* wake up hvc thread */
+
+unlock_return:
+ spin_unlock(&priv->lock);
+}
+
+/**
+ * hvc_iucv_msg_complete() - IUCV handler to process message completion
+ * @path: Pending path (struct iucv_path)
+ * @msg: Pointer to the IUCV message
+ *
+ * The function is called upon completion of message delivery to remove the
+ * message from the outqueue. Additional delivery information can be found
+ * msg->audit: rejected messages (0x040000 (IPADRJCT)), and
+ * purged messages (0x010000 (IPADPGNR)).
+ *
+ * Locking: struct hvc_iucv_private->lock
+ */
+static void hvc_iucv_msg_complete(struct iucv_path *path,
+ struct iucv_message *msg)
+{
+ struct hvc_iucv_private *priv = path->private;
+ struct iucv_tty_buffer *ent, *next;
+ LIST_HEAD(list_remove);
+
+ spin_lock(&priv->lock);
+ list_for_each_entry_safe(ent, next, &priv->tty_outqueue, list)
+ if (ent->msg.id == msg->id) {
+ list_move(&ent->list, &list_remove);
+ break;
+ }
+ wake_up(&priv->sndbuf_waitq);
+ spin_unlock(&priv->lock);
+ destroy_tty_buffer_list(&list_remove);
+}
+
+/**
+ * hvc_iucv_pm_freeze() - Freeze PM callback
+ * @dev: IUVC HVC terminal device
+ *
+ * Sever an established IUCV communication path and
+ * trigger a hang-up of the underlying HVC terminal.
+ */
+static int hvc_iucv_pm_freeze(struct device *dev)
+{
+ struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+
+ local_bh_disable();
+ hvc_iucv_hangup(priv);
+ local_bh_enable();
+
+ return 0;
+}
+
+/**
+ * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev: IUVC HVC terminal device
+ *
+ * Wake up the HVC thread to trigger hang-up and respective
+ * HVC back-end notifier invocations.
+ */
+static int hvc_iucv_pm_restore_thaw(struct device *dev)
+{
+ hvc_kick();
+ return 0;
+}
+
+
+/* HVC operations */
+static const struct hv_ops hvc_iucv_ops = {
+ .get_chars = hvc_iucv_get_chars,
+ .put_chars = hvc_iucv_put_chars,
+ .notifier_add = hvc_iucv_notifier_add,
+ .notifier_del = hvc_iucv_notifier_del,
+ .notifier_hangup = hvc_iucv_notifier_hangup,
+};
+
+/* Suspend / resume device operations */
+static const struct dev_pm_ops hvc_iucv_pm_ops = {
+ .freeze = hvc_iucv_pm_freeze,
+ .thaw = hvc_iucv_pm_restore_thaw,
+ .restore = hvc_iucv_pm_restore_thaw,
+};
+
+/* IUCV HVC device driver */
+static struct device_driver hvc_iucv_driver = {
+ .name = KMSG_COMPONENT,
+ .bus = &iucv_bus,
+ .pm = &hvc_iucv_pm_ops,
+};
+
+/**
+ * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance
+ * @id: hvc_iucv_table index
+ * @is_console: Flag if the instance is used as Linux console
+ *
+ * This function allocates a new hvc_iucv_private structure and stores
+ * the instance in hvc_iucv_table at index @id.
+ * Returns 0 on success; otherwise non-zero.
+ */
+static int __init hvc_iucv_alloc(int id, unsigned int is_console)
+{
+ struct hvc_iucv_private *priv;
+ char name[9];
+ int rc;
+
+ priv = kzalloc(sizeof(struct hvc_iucv_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ INIT_LIST_HEAD(&priv->tty_outqueue);
+ INIT_LIST_HEAD(&priv->tty_inqueue);
+ INIT_DELAYED_WORK(&priv->sndbuf_work, hvc_iucv_sndbuf_work);
+ init_waitqueue_head(&priv->sndbuf_waitq);
+
+ priv->sndbuf = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!priv->sndbuf) {
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ /* set console flag */
+ priv->is_console = is_console;
+
+ /* allocate hvc device */
+ priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /* PAGE_SIZE */
+ HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256);
+ if (IS_ERR(priv->hvc)) {
+ rc = PTR_ERR(priv->hvc);
+ goto out_error_hvc;
+ }
+
+ /* notify HVC thread instead of using polling */
+ priv->hvc->irq_requested = 1;
+
+ /* setup iucv related information */
+ snprintf(name, 9, "lnxhvc%-2d", id);
+ memcpy(priv->srv_name, name, 8);
+ ASCEBC(priv->srv_name, 8);
+
+ /* create and setup device */
+ priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL);
+ if (!priv->dev) {
+ rc = -ENOMEM;
+ goto out_error_dev;
+ }
+ dev_set_name(priv->dev, "hvc_iucv%d", id);
+ dev_set_drvdata(priv->dev, priv);
+ priv->dev->bus = &iucv_bus;
+ priv->dev->parent = iucv_root;
+ priv->dev->driver = &hvc_iucv_driver;
+ priv->dev->release = (void (*)(struct device *)) kfree;
+ rc = device_register(priv->dev);
+ if (rc) {
+ put_device(priv->dev);
+ goto out_error_dev;
+ }
+
+ hvc_iucv_table[id] = priv;
+ return 0;
+
+out_error_dev:
+ hvc_remove(priv->hvc);
+out_error_hvc:
+ free_page((unsigned long) priv->sndbuf);
+ kfree(priv);
+
+ return rc;
+}
+
+/**
+ * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances
+ */
+static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv)
+{
+ hvc_remove(priv->hvc);
+ device_unregister(priv->dev);
+ free_page((unsigned long) priv->sndbuf);
+ kfree(priv);
+}
+
+/**
+ * hvc_iucv_parse_filter() - Parse filter for a single z/VM user ID
+ * @filter: String containing a comma-separated list of z/VM user IDs
+ */
+static const char *hvc_iucv_parse_filter(const char *filter, char *dest)
+{
+ const char *nextdelim, *residual;
+ size_t len;
+
+ nextdelim = strchr(filter, ',');
+ if (nextdelim) {
+ len = nextdelim - filter;
+ residual = nextdelim + 1;
+ } else {
+ len = strlen(filter);
+ residual = filter + len;
+ }
+
+ if (len == 0)
+ return ERR_PTR(-EINVAL);
+
+ /* check for '\n' (if called from sysfs) */
+ if (filter[len - 1] == '\n')
+ len--;
+
+ if (len > 8)
+ return ERR_PTR(-EINVAL);
+
+ /* pad with blanks and save upper case version of user ID */
+ memset(dest, ' ', 8);
+ while (len--)
+ dest[len] = toupper(filter[len]);
+ return residual;
+}
+
+/**
+ * hvc_iucv_setup_filter() - Set up z/VM user ID filter
+ * @filter: String consisting of a comma-separated list of z/VM user IDs
+ *
+ * The function parses the @filter string and creates an array containing
+ * the list of z/VM user ID filter entries.
+ * Return code 0 means success, -EINVAL if the filter is syntactically
+ * incorrect, -ENOMEM if there was not enough memory to allocate the
+ * filter list array, or -ENOSPC if too many z/VM user IDs have been specified.
+ */
+static int hvc_iucv_setup_filter(const char *val)
+{
+ const char *residual;
+ int err;
+ size_t size, count;
+ void *array, *old_filter;
+
+ count = strlen(val);
+ if (count == 0 || (count == 1 && val[0] == '\n')) {
+ size = 0;
+ array = NULL;
+ goto out_replace_filter; /* clear filter */
+ }
+
+ /* count user IDs in order to allocate sufficient memory */
+ size = 1;
+ residual = val;
+ while ((residual = strchr(residual, ',')) != NULL) {
+ residual++;
+ size++;
+ }
+
+ /* check if the specified list exceeds the filter limit */
+ if (size > MAX_VMID_FILTER)
+ return -ENOSPC;
+
+ array = kzalloc(size * 8, GFP_KERNEL);
+ if (!array)
+ return -ENOMEM;
+
+ count = size;
+ residual = val;
+ while (*residual && count) {
+ residual = hvc_iucv_parse_filter(residual,
+ array + ((size - count) * 8));
+ if (IS_ERR(residual)) {
+ err = PTR_ERR(residual);
+ kfree(array);
+ goto out_err;
+ }
+ count--;
+ }
+
+out_replace_filter:
+ write_lock_bh(&hvc_iucv_filter_lock);
+ old_filter = hvc_iucv_filter;
+ hvc_iucv_filter_size = size;
+ hvc_iucv_filter = array;
+ write_unlock_bh(&hvc_iucv_filter_lock);
+ kfree(old_filter);
+
+ err = 0;
+out_err:
+ return err;
+}
+
+/**
+ * param_set_vmidfilter() - Set z/VM user ID filter parameter
+ * @val: String consisting of a comma-separated list of z/VM user IDs
+ * @kp: Kernel parameter pointing to hvc_iucv_filter array
+ *
+ * The function sets up the z/VM user ID filter specified as comma-separated
+ * list of user IDs in @val.
+ * Note: If it is called early in the boot process, @val is stored and
+ * parsed later in hvc_iucv_init().
+ */
+static int param_set_vmidfilter(const char *val, const struct kernel_param *kp)
+{
+ int rc;
+
+ if (!MACHINE_IS_VM || !hvc_iucv_devices)
+ return -ENODEV;
+
+ if (!val)
+ return -EINVAL;
+
+ rc = 0;
+ if (slab_is_available())
+ rc = hvc_iucv_setup_filter(val);
+ else
+ hvc_iucv_filter_string = val; /* defer... */
+ return rc;
+}
+
+/**
+ * param_get_vmidfilter() - Get z/VM user ID filter
+ * @buffer: Buffer to store z/VM user ID filter,
+ * (buffer size assumption PAGE_SIZE)
+ * @kp: Kernel parameter pointing to the hvc_iucv_filter array
+ *
+ * The function stores the filter as a comma-separated list of z/VM user IDs
+ * in @buffer. Typically, sysfs routines call this function for attr show.
+ */
+static int param_get_vmidfilter(char *buffer, const struct kernel_param *kp)
+{
+ int rc;
+ size_t index, len;
+ void *start, *end;
+
+ if (!MACHINE_IS_VM || !hvc_iucv_devices)
+ return -ENODEV;
+
+ rc = 0;
+ read_lock_bh(&hvc_iucv_filter_lock);
+ for (index = 0; index < hvc_iucv_filter_size; index++) {
+ start = hvc_iucv_filter + (8 * index);
+ end = memchr(start, ' ', 8);
+ len = (end) ? end - start : 8;
+ memcpy(buffer + rc, start, len);
+ rc += len;
+ buffer[rc++] = ',';
+ }
+ read_unlock_bh(&hvc_iucv_filter_lock);
+ if (rc)
+ buffer[--rc] = '\0'; /* replace last comma and update rc */
+ return rc;
+}
+
+#define param_check_vmidfilter(name, p) __param_check(name, p, void)
+
+static struct kernel_param_ops param_ops_vmidfilter = {
+ .set = param_set_vmidfilter,
+ .get = param_get_vmidfilter,
+};
+
+/**
+ * hvc_iucv_init() - z/VM IUCV HVC device driver initialization
+ */
+static int __init hvc_iucv_init(void)
+{
+ int rc;
+ unsigned int i;
+
+ if (!hvc_iucv_devices)
+ return -ENODEV;
+
+ if (!MACHINE_IS_VM) {
+ pr_notice("The z/VM IUCV HVC device driver cannot "
+ "be used without z/VM\n");
+ rc = -ENODEV;
+ goto out_error;
+ }
+
+ if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) {
+ pr_err("%lu is not a valid value for the hvc_iucv= "
+ "kernel parameter\n", hvc_iucv_devices);
+ rc = -EINVAL;
+ goto out_error;
+ }
+
+ /* register IUCV HVC device driver */
+ rc = driver_register(&hvc_iucv_driver);
+ if (rc)
+ goto out_error;
+
+ /* parse hvc_iucv_allow string and create z/VM user ID filter list */
+ if (hvc_iucv_filter_string) {
+ rc = hvc_iucv_setup_filter(hvc_iucv_filter_string);
+ switch (rc) {
+ case 0:
+ break;
+ case -ENOMEM:
+ pr_err("Allocating memory failed with "
+ "reason code=%d\n", 3);
+ goto out_error;
+ case -EINVAL:
+ pr_err("hvc_iucv_allow= does not specify a valid "
+ "z/VM user ID list\n");
+ goto out_error;
+ case -ENOSPC:
+ pr_err("hvc_iucv_allow= specifies too many "
+ "z/VM user IDs\n");
+ goto out_error;
+ default:
+ goto out_error;
+ }
+ }
+
+ hvc_iucv_buffer_cache = kmem_cache_create(KMSG_COMPONENT,
+ sizeof(struct iucv_tty_buffer),
+ 0, 0, NULL);
+ if (!hvc_iucv_buffer_cache) {
+ pr_err("Allocating memory failed with reason code=%d\n", 1);
+ rc = -ENOMEM;
+ goto out_error;
+ }
+
+ hvc_iucv_mempool = mempool_create_slab_pool(MEMPOOL_MIN_NR,
+ hvc_iucv_buffer_cache);
+ if (!hvc_iucv_mempool) {
+ pr_err("Allocating memory failed with reason code=%d\n", 2);
+ kmem_cache_destroy(hvc_iucv_buffer_cache);
+ rc = -ENOMEM;
+ goto out_error;
+ }
+
+ /* register the first terminal device as console
+ * (must be done before allocating hvc terminal devices) */
+ rc = hvc_instantiate(HVC_IUCV_MAGIC, IUCV_HVC_CON_IDX, &hvc_iucv_ops);
+ if (rc) {
+ pr_err("Registering HVC terminal device as "
+ "Linux console failed\n");
+ goto out_error_memory;
+ }
+
+ /* allocate hvc_iucv_private structs */
+ for (i = 0; i < hvc_iucv_devices; i++) {
+ rc = hvc_iucv_alloc(i, (i == IUCV_HVC_CON_IDX) ? 1 : 0);
+ if (rc) {
+ pr_err("Creating a new HVC terminal device "
+ "failed with error code=%d\n", rc);
+ goto out_error_hvc;
+ }
+ }
+
+ /* register IUCV callback handler */
+ rc = iucv_register(&hvc_iucv_handler, 0);
+ if (rc) {
+ pr_err("Registering IUCV handlers failed with error code=%d\n",
+ rc);
+ goto out_error_hvc;
+ }
+
+ return 0;
+
+out_error_hvc:
+ for (i = 0; i < hvc_iucv_devices; i++)
+ if (hvc_iucv_table[i])
+ hvc_iucv_destroy(hvc_iucv_table[i]);
+out_error_memory:
+ mempool_destroy(hvc_iucv_mempool);
+ kmem_cache_destroy(hvc_iucv_buffer_cache);
+out_error:
+ if (hvc_iucv_filter)
+ kfree(hvc_iucv_filter);
+ hvc_iucv_devices = 0; /* ensure that we do not provide any device */
+ return rc;
+}
+
+/**
+ * hvc_iucv_config() - Parsing of hvc_iucv= kernel command line parameter
+ * @val: Parameter value (numeric)
+ */
+static int __init hvc_iucv_config(char *val)
+{
+ return strict_strtoul(val, 10, &hvc_iucv_devices);
+}
+
+
+device_initcall(hvc_iucv_init);
+__setup("hvc_iucv=", hvc_iucv_config);
+core_param(hvc_iucv_allow, hvc_iucv_filter, vmidfilter, 0640);
diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c
new file mode 100644
index 000000000000..61c4a61558d9
--- /dev/null
+++ b/drivers/tty/hvc/hvc_rtas.c
@@ -0,0 +1,133 @@
+/*
+ * IBM RTAS driver interface to hvc_console.c
+ *
+ * (C) Copyright IBM Corporation 2001-2005
+ * (C) Copyright Red Hat, Inc. 2005
+ *
+ * Author(s): Maximino Augilar <IBM STI Design Center>
+ * : Ryan S. Arnold <rsa@us.ibm.com>
+ * : Utz Bacher <utz.bacher@de.ibm.com>
+ * : David Woodhouse <dwmw2@infradead.org>
+ *
+ * inspired by drivers/char/hvc_console.c
+ * written by Anton Blanchard and Paul Mackerras
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/rtas.h>
+#include "hvc_console.h"
+
+#define hvc_rtas_cookie 0x67781e15
+struct hvc_struct *hvc_rtas_dev;
+
+static int rtascons_put_char_token = RTAS_UNKNOWN_SERVICE;
+static int rtascons_get_char_token = RTAS_UNKNOWN_SERVICE;
+
+static inline int hvc_rtas_write_console(uint32_t vtermno, const char *buf,
+ int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (rtas_call(rtascons_put_char_token, 1, 1, NULL, buf[i]))
+ break;
+ }
+
+ return i;
+}
+
+static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count)
+{
+ int i, c;
+
+ for (i = 0; i < count; i++) {
+ if (rtas_call(rtascons_get_char_token, 0, 2, &c))
+ break;
+
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_rtas_get_put_ops = {
+ .get_chars = hvc_rtas_read_console,
+ .put_chars = hvc_rtas_write_console,
+};
+
+static int __init hvc_rtas_init(void)
+{
+ struct hvc_struct *hp;
+
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ rtascons_put_char_token = rtas_token("put-term-char");
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ rtascons_get_char_token = rtas_token("get-term-char");
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ BUG_ON(hvc_rtas_dev);
+
+ /* Allocate an hvc_struct for the console device we instantiated
+ * earlier. Save off hp so that we can return it on exit */
+ hp = hvc_alloc(hvc_rtas_cookie, NO_IRQ, &hvc_rtas_get_put_ops, 16);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+
+ hvc_rtas_dev = hp;
+
+ return 0;
+}
+module_init(hvc_rtas_init);
+
+/* This will tear down the tty portion of the driver */
+static void __exit hvc_rtas_exit(void)
+{
+ /* Really the fun isn't over until the worker thread breaks down and
+ * the tty cleans up */
+ if (hvc_rtas_dev)
+ hvc_remove(hvc_rtas_dev);
+}
+module_exit(hvc_rtas_exit);
+
+/* This will happen prior to module init. There is no tty at this time? */
+static int __init hvc_rtas_console_init(void)
+{
+ rtascons_put_char_token = rtas_token("put-term-char");
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ rtascons_get_char_token = rtas_token("get-term-char");
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ hvc_instantiate(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops);
+ add_preferred_console("hvc", 0, NULL);
+
+ return 0;
+}
+console_initcall(hvc_rtas_console_init);
diff --git a/drivers/tty/hvc/hvc_tile.c b/drivers/tty/hvc/hvc_tile.c
new file mode 100644
index 000000000000..7a84a0595477
--- /dev/null
+++ b/drivers/tty/hvc/hvc_tile.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Tilera TILE Processor hypervisor console
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <hv/hypervisor.h>
+
+#include "hvc_console.h"
+
+static int hvc_tile_put_chars(uint32_t vt, const char *buf, int count)
+{
+ return hv_console_write((HV_VirtAddr)buf, count);
+}
+
+static int hvc_tile_get_chars(uint32_t vt, char *buf, int count)
+{
+ int i, c;
+
+ for (i = 0; i < count; ++i) {
+ c = hv_console_read_if_ready();
+ if (c < 0)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_tile_get_put_ops = {
+ .get_chars = hvc_tile_get_chars,
+ .put_chars = hvc_tile_put_chars,
+};
+
+static int __init hvc_tile_console_init(void)
+{
+ extern void disable_early_printk(void);
+ hvc_instantiate(0, 0, &hvc_tile_get_put_ops);
+ add_preferred_console("hvc", 0, NULL);
+ disable_early_printk();
+ return 0;
+}
+console_initcall(hvc_tile_console_init);
+
+static int __init hvc_tile_init(void)
+{
+ struct hvc_struct *s;
+ s = hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128);
+ return IS_ERR(s) ? PTR_ERR(s) : 0;
+}
+device_initcall(hvc_tile_init);
diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c
new file mode 100644
index 000000000000..b0957e61a7be
--- /dev/null
+++ b/drivers/tty/hvc/hvc_udbg.c
@@ -0,0 +1,96 @@
+/*
+ * udbg interface to hvc_console.c
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2008.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+
+#include <asm/udbg.h>
+
+#include "hvc_console.h"
+
+struct hvc_struct *hvc_udbg_dev;
+
+static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ udbg_putc(buf[i]);
+
+ return i;
+}
+
+static int hvc_udbg_get(uint32_t vtermno, char *buf, int count)
+{
+ int i, c;
+
+ if (!udbg_getc_poll)
+ return 0;
+
+ for (i = 0; i < count; i++) {
+ if ((c = udbg_getc_poll()) == -1)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_udbg_ops = {
+ .get_chars = hvc_udbg_get,
+ .put_chars = hvc_udbg_put,
+};
+
+static int __init hvc_udbg_init(void)
+{
+ struct hvc_struct *hp;
+
+ BUG_ON(hvc_udbg_dev);
+
+ hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+
+ hvc_udbg_dev = hp;
+
+ return 0;
+}
+module_init(hvc_udbg_init);
+
+static void __exit hvc_udbg_exit(void)
+{
+ if (hvc_udbg_dev)
+ hvc_remove(hvc_udbg_dev);
+}
+module_exit(hvc_udbg_exit);
+
+static int __init hvc_udbg_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_udbg_ops);
+ add_preferred_console("hvc", 0, NULL);
+
+ return 0;
+}
+console_initcall(hvc_udbg_console_init);
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
new file mode 100644
index 000000000000..5e2f52b33327
--- /dev/null
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -0,0 +1,173 @@
+/*
+ * vio driver interface to hvc_console.c
+ *
+ * This code was moved here to allow the remaing code to be reused as a
+ * generic polling mode with semi-reliable transport driver core to the
+ * console and tty subsystems.
+ *
+ *
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2004 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Additional Author(s):
+ * Ryan S. Arnold <rsa@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <asm/hvconsole.h>
+#include <asm/vio.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+
+#include "hvc_console.h"
+
+static const char hvc_driver_name[] = "hvc_console";
+
+static struct vio_device_id hvc_driver_table[] __devinitdata = {
+ {"serial", "hvterm1"},
+ { "", "" }
+};
+MODULE_DEVICE_TABLE(vio, hvc_driver_table);
+
+static int filtered_get_chars(uint32_t vtermno, char *buf, int count)
+{
+ unsigned long got;
+ int i;
+
+ /*
+ * Vio firmware will read up to SIZE_VIO_GET_CHARS at its own discretion
+ * so we play safe and avoid the situation where got > count which could
+ * overload the flip buffer.
+ */
+ if (count < SIZE_VIO_GET_CHARS)
+ return -EAGAIN;
+
+ got = hvc_get_chars(vtermno, buf, count);
+
+ /*
+ * Work around a HV bug where it gives us a null
+ * after every \r. -- paulus
+ */
+ for (i = 1; i < got; ++i) {
+ if (buf[i] == 0 && buf[i-1] == '\r') {
+ --got;
+ if (i < got)
+ memmove(&buf[i], &buf[i+1],
+ got - i);
+ }
+ }
+ return got;
+}
+
+static const struct hv_ops hvc_get_put_ops = {
+ .get_chars = filtered_get_chars,
+ .put_chars = hvc_put_chars,
+ .notifier_add = notifier_add_irq,
+ .notifier_del = notifier_del_irq,
+ .notifier_hangup = notifier_hangup_irq,
+};
+
+static int __devinit hvc_vio_probe(struct vio_dev *vdev,
+ const struct vio_device_id *id)
+{
+ struct hvc_struct *hp;
+
+ /* probed with invalid parameters. */
+ if (!vdev || !id)
+ return -EPERM;
+
+ hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops,
+ MAX_VIO_PUT_CHARS);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+ dev_set_drvdata(&vdev->dev, hp);
+
+ return 0;
+}
+
+static int __devexit hvc_vio_remove(struct vio_dev *vdev)
+{
+ struct hvc_struct *hp = dev_get_drvdata(&vdev->dev);
+
+ return hvc_remove(hp);
+}
+
+static struct vio_driver hvc_vio_driver = {
+ .id_table = hvc_driver_table,
+ .probe = hvc_vio_probe,
+ .remove = __devexit_p(hvc_vio_remove),
+ .driver = {
+ .name = hvc_driver_name,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init hvc_vio_init(void)
+{
+ int rc;
+
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EIO;
+
+ /* Register as a vio device to receive callbacks */
+ rc = vio_register_driver(&hvc_vio_driver);
+
+ return rc;
+}
+module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */
+
+static void __exit hvc_vio_exit(void)
+{
+ vio_unregister_driver(&hvc_vio_driver);
+}
+module_exit(hvc_vio_exit);
+
+/* the device tree order defines our numbering */
+static int hvc_find_vtys(void)
+{
+ struct device_node *vty;
+ int num_found = 0;
+
+ for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
+ vty = of_find_node_by_name(vty, "vty")) {
+ const uint32_t *vtermno;
+
+ /* We have statically defined space for only a certain number
+ * of console adapters.
+ */
+ if (num_found >= MAX_NR_HVC_CONSOLES) {
+ of_node_put(vty);
+ break;
+ }
+
+ vtermno = of_get_property(vty, "reg", NULL);
+ if (!vtermno)
+ continue;
+
+ if (of_device_is_compatible(vty, "hvterm1")) {
+ hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops);
+ ++num_found;
+ }
+ }
+
+ return num_found;
+}
+console_initcall(hvc_find_vtys);
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
new file mode 100644
index 000000000000..3740e327f180
--- /dev/null
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -0,0 +1,271 @@
+/*
+ * xen console driver interface to hvc_console.c
+ *
+ * (c) 2007 Gerd Hoffmann <kraxel@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <asm/xen/hypervisor.h>
+
+#include <xen/xen.h>
+#include <xen/page.h>
+#include <xen/events.h>
+#include <xen/interface/io/console.h>
+#include <xen/hvc-console.h>
+
+#include "hvc_console.h"
+
+#define HVC_COOKIE 0x58656e /* "Xen" in hex */
+
+static struct hvc_struct *hvc;
+static int xencons_irq;
+
+/* ------------------------------------------------------------------ */
+
+static unsigned long console_pfn = ~0ul;
+
+static inline struct xencons_interface *xencons_interface(void)
+{
+ if (console_pfn == ~0ul)
+ return mfn_to_virt(xen_start_info->console.domU.mfn);
+ else
+ return __va(console_pfn << PAGE_SHIFT);
+}
+
+static inline void notify_daemon(void)
+{
+ /* Use evtchn: this is called early, before irq is set up. */
+ notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
+}
+
+static int __write_console(const char *data, int len)
+{
+ struct xencons_interface *intf = xencons_interface();
+ XENCONS_RING_IDX cons, prod;
+ int sent = 0;
+
+ cons = intf->out_cons;
+ prod = intf->out_prod;
+ mb(); /* update queue values before going on */
+ BUG_ON((prod - cons) > sizeof(intf->out));
+
+ while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
+ intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
+
+ wmb(); /* write ring before updating pointer */
+ intf->out_prod = prod;
+
+ if (sent)
+ notify_daemon();
+ return sent;
+}
+
+static int domU_write_console(uint32_t vtermno, const char *data, int len)
+{
+ int ret = len;
+
+ /*
+ * Make sure the whole buffer is emitted, polling if
+ * necessary. We don't ever want to rely on the hvc daemon
+ * because the most interesting console output is when the
+ * kernel is crippled.
+ */
+ while (len) {
+ int sent = __write_console(data, len);
+
+ data += sent;
+ len -= sent;
+
+ if (unlikely(len))
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
+ }
+
+ return ret;
+}
+
+static int domU_read_console(uint32_t vtermno, char *buf, int len)
+{
+ struct xencons_interface *intf = xencons_interface();
+ XENCONS_RING_IDX cons, prod;
+ int recv = 0;
+
+ cons = intf->in_cons;
+ prod = intf->in_prod;
+ mb(); /* get pointers before reading ring */
+ BUG_ON((prod - cons) > sizeof(intf->in));
+
+ while (cons != prod && recv < len)
+ buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
+
+ mb(); /* read ring before consuming */
+ intf->in_cons = cons;
+
+ notify_daemon();
+ return recv;
+}
+
+static struct hv_ops domU_hvc_ops = {
+ .get_chars = domU_read_console,
+ .put_chars = domU_write_console,
+ .notifier_add = notifier_add_irq,
+ .notifier_del = notifier_del_irq,
+ .notifier_hangup = notifier_hangup_irq,
+};
+
+static int dom0_read_console(uint32_t vtermno, char *buf, int len)
+{
+ return HYPERVISOR_console_io(CONSOLEIO_read, len, buf);
+}
+
+/*
+ * Either for a dom0 to write to the system console, or a domU with a
+ * debug version of Xen
+ */
+static int dom0_write_console(uint32_t vtermno, const char *str, int len)
+{
+ int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str);
+ if (rc < 0)
+ return 0;
+
+ return len;
+}
+
+static struct hv_ops dom0_hvc_ops = {
+ .get_chars = dom0_read_console,
+ .put_chars = dom0_write_console,
+ .notifier_add = notifier_add_irq,
+ .notifier_del = notifier_del_irq,
+ .notifier_hangup = notifier_hangup_irq,
+};
+
+static int __init xen_hvc_init(void)
+{
+ struct hvc_struct *hp;
+ struct hv_ops *ops;
+
+ if (!xen_pv_domain())
+ return -ENODEV;
+
+ if (xen_initial_domain()) {
+ ops = &dom0_hvc_ops;
+ xencons_irq = bind_virq_to_irq(VIRQ_CONSOLE, 0);
+ } else {
+ if (!xen_start_info->console.domU.evtchn)
+ return -ENODEV;
+
+ ops = &domU_hvc_ops;
+ xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn);
+ }
+ if (xencons_irq < 0)
+ xencons_irq = 0; /* NO_IRQ */
+
+ hp = hvc_alloc(HVC_COOKIE, xencons_irq, ops, 256);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+
+ hvc = hp;
+
+ console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn);
+
+ return 0;
+}
+
+void xen_console_resume(void)
+{
+ if (xencons_irq)
+ rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq);
+}
+
+static void __exit xen_hvc_fini(void)
+{
+ if (hvc)
+ hvc_remove(hvc);
+}
+
+static int xen_cons_init(void)
+{
+ struct hv_ops *ops;
+
+ if (!xen_pv_domain())
+ return 0;
+
+ if (xen_initial_domain())
+ ops = &dom0_hvc_ops;
+ else
+ ops = &domU_hvc_ops;
+
+ hvc_instantiate(HVC_COOKIE, 0, ops);
+ return 0;
+}
+
+module_init(xen_hvc_init);
+module_exit(xen_hvc_fini);
+console_initcall(xen_cons_init);
+
+#ifdef CONFIG_EARLY_PRINTK
+static void xenboot_write_console(struct console *console, const char *string,
+ unsigned len)
+{
+ unsigned int linelen, off = 0;
+ const char *pos;
+
+ dom0_write_console(0, string, len);
+
+ if (xen_initial_domain())
+ return;
+
+ domU_write_console(0, "(early) ", 8);
+ while (off < len && NULL != (pos = strchr(string+off, '\n'))) {
+ linelen = pos-string+off;
+ if (off + linelen > len)
+ break;
+ domU_write_console(0, string+off, linelen);
+ domU_write_console(0, "\r\n", 2);
+ off += linelen + 1;
+ }
+ if (off < len)
+ domU_write_console(0, string+off, len-off);
+}
+
+struct console xenboot_console = {
+ .name = "xenboot",
+ .write = xenboot_write_console,
+ .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME,
+};
+#endif /* CONFIG_EARLY_PRINTK */
+
+void xen_raw_console_write(const char *str)
+{
+ dom0_write_console(0, str, strlen(str));
+}
+
+void xen_raw_printk(const char *fmt, ...)
+{
+ static char buf[512];
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ va_end(ap);
+
+ xen_raw_console_write(buf);
+}
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
new file mode 100644
index 000000000000..bedc6c1b6fa5
--- /dev/null
+++ b/drivers/tty/hvc/hvcs.c
@@ -0,0 +1,1604 @@
+/*
+ * IBM eServer Hypervisor Virtual Console Server Device Driver
+ * Copyright (C) 2003, 2004 IBM Corp.
+ * Ryan S. Arnold (rsa@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author(s) : Ryan S. Arnold <rsa@us.ibm.com>
+ *
+ * This is the device driver for the IBM Hypervisor Virtual Console Server,
+ * "hvcs". The IBM hvcs provides a tty driver interface to allow Linux
+ * user space applications access to the system consoles of logically
+ * partitioned operating systems, e.g. Linux, running on the same partitioned
+ * Power5 ppc64 system. Physical hardware consoles per partition are not
+ * practical on this hardware so system consoles are accessed by this driver
+ * using inter-partition firmware interfaces to virtual terminal devices.
+ *
+ * A vty is known to the HMC as a "virtual serial server adapter". It is a
+ * virtual terminal device that is created by firmware upon partition creation
+ * to act as a partitioned OS's console device.
+ *
+ * Firmware dynamically (via hotplug) exposes vty-servers to a running ppc64
+ * Linux system upon their creation by the HMC or their exposure during boot.
+ * The non-user interactive backend of this driver is implemented as a vio
+ * device driver so that it can receive notification of vty-server lifetimes
+ * after it registers with the vio bus to handle vty-server probe and remove
+ * callbacks.
+ *
+ * Many vty-servers can be configured to connect to one vty, but a vty can
+ * only be actively connected to by a single vty-server, in any manner, at one
+ * time. If the HMC is currently hosting the console for a target Linux
+ * partition; attempts to open the tty device to the partition's console using
+ * the hvcs on any partition will return -EBUSY with every open attempt until
+ * the HMC frees the connection between its vty-server and the desired
+ * partition's vty device. Conversely, a vty-server may only be connected to
+ * a single vty at one time even though it may have several configured vty
+ * partner possibilities.
+ *
+ * Firmware does not provide notification of vty partner changes to this
+ * driver. This means that an HMC Super Admin may add or remove partner vtys
+ * from a vty-server's partner list but the changes will not be signaled to
+ * the vty-server. Firmware only notifies the driver when a vty-server is
+ * added or removed from the system. To compensate for this deficiency, this
+ * driver implements a sysfs update attribute which provides a method for
+ * rescanning partner information upon a user's request.
+ *
+ * Each vty-server, prior to being exposed to this driver is reference counted
+ * using the 2.6 Linux kernel kref construct.
+ *
+ * For direction on installation and usage of this driver please reference
+ * Documentation/powerpc/hvcs.txt.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <asm/hvconsole.h>
+#include <asm/hvcserver.h>
+#include <asm/uaccess.h>
+#include <asm/vio.h>
+
+/*
+ * 1.3.0 -> 1.3.1 In hvcs_open memset(..,0x00,..) instead of memset(..,0x3F,00).
+ * Removed braces around single statements following conditionals. Removed '=
+ * 0' after static int declarations since these default to zero. Removed
+ * list_for_each_safe() and replaced with list_for_each_entry() in
+ * hvcs_get_by_index(). The 'safe' version is un-needed now that the driver is
+ * using spinlocks. Changed spin_lock_irqsave() to spin_lock() when locking
+ * hvcs_structs_lock and hvcs_pi_lock since these are not touched in an int
+ * handler. Initialized hvcs_structs_lock and hvcs_pi_lock to
+ * SPIN_LOCK_UNLOCKED at declaration time rather than in hvcs_module_init().
+ * Added spin_lock around list_del() in destroy_hvcs_struct() to protect the
+ * list traversals from a deletion. Removed '= NULL' from pointer declaration
+ * statements since they are initialized NULL by default. Removed wmb()
+ * instances from hvcs_try_write(). They probably aren't needed with locking in
+ * place. Added check and cleanup for hvcs_pi_buff = kmalloc() in
+ * hvcs_module_init(). Exposed hvcs_struct.index via a sysfs attribute so that
+ * the coupling between /dev/hvcs* and a vty-server can be automatically
+ * determined. Moved kobject_put() in hvcs_open outside of the
+ * spin_unlock_irqrestore().
+ *
+ * 1.3.1 -> 1.3.2 Changed method for determining hvcs_struct->index and had it
+ * align with how the tty layer always assigns the lowest index available. This
+ * change resulted in a list of ints that denotes which indexes are available.
+ * Device additions and removals use the new hvcs_get_index() and
+ * hvcs_return_index() helper functions. The list is created with
+ * hvsc_alloc_index_list() and it is destroyed with hvcs_free_index_list().
+ * Without these fixes hotplug vty-server adapter support goes crazy with this
+ * driver if the user removes a vty-server adapter. Moved free_irq() outside of
+ * the hvcs_final_close() function in order to get it out of the spinlock.
+ * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping
+ * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from
+ * arch/powerepc/include/asm/hvcserver.h
+ *
+ * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
+ * prevent possible lockup with realtime scheduling as similarily pointed out by
+ * akpm in hvc_console. Changed resulted in the removal of hvcs_final_close()
+ * to reorder cleanup operations and prevent discarding of pending data during
+ * an hvcs_close(). Removed spinlock protection of hvcs_struct data members in
+ * hvcs_write_room() and hvcs_chars_in_buffer() because they aren't needed.
+ */
+
+#define HVCS_DRIVER_VERSION "1.3.3"
+
+MODULE_AUTHOR("Ryan S. Arnold <rsa@us.ibm.com>");
+MODULE_DESCRIPTION("IBM hvcs (Hypervisor Virtual Console Server) Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HVCS_DRIVER_VERSION);
+
+/*
+ * Wait this long per iteration while trying to push buffered data to the
+ * hypervisor before allowing the tty to complete a close operation.
+ */
+#define HVCS_CLOSE_WAIT (HZ/100) /* 1/10 of a second */
+
+/*
+ * Since the Linux TTY code does not currently (2-04-2004) support dynamic
+ * addition of tty derived devices and we shouldn't allocate thousands of
+ * tty_device pointers when the number of vty-server & vty partner connections
+ * will most often be much lower than this, we'll arbitrarily allocate
+ * HVCS_DEFAULT_SERVER_ADAPTERS tty_structs and cdev's by default when we
+ * register the tty_driver. This can be overridden using an insmod parameter.
+ */
+#define HVCS_DEFAULT_SERVER_ADAPTERS 64
+
+/*
+ * The user can't insmod with more than HVCS_MAX_SERVER_ADAPTERS hvcs device
+ * nodes as a sanity check. Theoretically there can be over 1 Billion
+ * vty-server & vty partner connections.
+ */
+#define HVCS_MAX_SERVER_ADAPTERS 1024
+
+/*
+ * We let Linux assign us a major number and we start the minors at zero. There
+ * is no intuitive mapping between minor number and the target vty-server
+ * adapter except that each new vty-server adapter is always assigned to the
+ * smallest minor number available.
+ */
+#define HVCS_MINOR_START 0
+
+/*
+ * The hcall interface involves putting 8 chars into each of two registers.
+ * We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c)
+ * by casting char[16] to long[2]. It would work without __ALIGNED__, but a
+ * little (tiny) bit slower because an unaligned load is slower than aligned
+ * load.
+ */
+#define __ALIGNED__ __attribute__((__aligned__(8)))
+
+/*
+ * How much data can firmware send with each hvc_put_chars()? Maybe this
+ * should be moved into an architecture specific area.
+ */
+#define HVCS_BUFF_LEN 16
+
+/*
+ * This is the maximum amount of data we'll let the user send us (hvcs_write) at
+ * once in a chunk as a sanity check.
+ */
+#define HVCS_MAX_FROM_USER 4096
+
+/*
+ * Be careful when adding flags to this line discipline. Don't add anything
+ * that will cause echoing or we'll go into recursive loop echoing chars back
+ * and forth with the console drivers.
+ */
+static struct ktermios hvcs_tty_termios = {
+ .c_iflag = IGNBRK | IGNPAR,
+ .c_oflag = OPOST,
+ .c_cflag = B38400 | CS8 | CREAD | HUPCL,
+ .c_cc = INIT_C_CC,
+ .c_ispeed = 38400,
+ .c_ospeed = 38400
+};
+
+/*
+ * This value is used to take the place of a command line parameter when the
+ * module is inserted. It starts as -1 and stays as such if the user doesn't
+ * specify a module insmod parameter. If they DO specify one then it is set to
+ * the value of the integer passed in.
+ */
+static int hvcs_parm_num_devs = -1;
+module_param(hvcs_parm_num_devs, int, 0);
+
+static const char hvcs_driver_name[] = "hvcs";
+static const char hvcs_device_node[] = "hvcs";
+static const char hvcs_driver_string[]
+ = "IBM hvcs (Hypervisor Virtual Console Server) Driver";
+
+/* Status of partner info rescan triggered via sysfs. */
+static int hvcs_rescan_status;
+
+static struct tty_driver *hvcs_tty_driver;
+
+/*
+ * In order to be somewhat sane this driver always associates the hvcs_struct
+ * index element with the numerically equal tty->index. This means that a
+ * hotplugged vty-server adapter will always map to the lowest index valued
+ * device node. If vty-servers were hotplug removed from the system and then
+ * new ones added the new vty-server may have the largest slot number of all
+ * the vty-server adapters in the partition but it may have the lowest dev node
+ * index of all the adapters due to the hole left by the hotplug removed
+ * adapter. There are a set of functions provided to get the lowest index for
+ * a new device as well as return the index to the list. This list is allocated
+ * with a number of elements equal to the number of device nodes requested when
+ * the module was inserted.
+ */
+static int *hvcs_index_list;
+
+/*
+ * How large is the list? This is kept for traversal since the list is
+ * dynamically created.
+ */
+static int hvcs_index_count;
+
+/*
+ * Used by the khvcsd to pick up I/O operations when the kernel_thread is
+ * already awake but potentially shifted to TASK_INTERRUPTIBLE state.
+ */
+static int hvcs_kicked;
+
+/*
+ * Use by the kthread construct for task operations like waking the sleeping
+ * thread and stopping the kthread.
+ */
+static struct task_struct *hvcs_task;
+
+/*
+ * We allocate this for the use of all of the hvcs_structs when they fetch
+ * partner info.
+ */
+static unsigned long *hvcs_pi_buff;
+
+/* Only allow one hvcs_struct to use the hvcs_pi_buff at a time. */
+static DEFINE_SPINLOCK(hvcs_pi_lock);
+
+/* One vty-server per hvcs_struct */
+struct hvcs_struct {
+ spinlock_t lock;
+
+ /*
+ * This index identifies this hvcs device as the complement to a
+ * specific tty index.
+ */
+ unsigned int index;
+
+ struct tty_struct *tty;
+ int open_count;
+
+ /*
+ * Used to tell the driver kernel_thread what operations need to take
+ * place upon this hvcs_struct instance.
+ */
+ int todo_mask;
+
+ /*
+ * This buffer is required so that when hvcs_write_room() reports that
+ * it can send HVCS_BUFF_LEN characters that it will buffer the full
+ * HVCS_BUFF_LEN characters if need be. This is essential for opost
+ * writes since they do not do high level buffering and expect to be
+ * able to send what the driver commits to sending buffering
+ * [e.g. tab to space conversions in n_tty.c opost()].
+ */
+ char buffer[HVCS_BUFF_LEN];
+ int chars_in_buffer;
+
+ /*
+ * Any variable below the kref is valid before a tty is connected and
+ * stays valid after the tty is disconnected. These shouldn't be
+ * whacked until the koject refcount reaches zero though some entries
+ * may be changed via sysfs initiatives.
+ */
+ struct kref kref; /* ref count & hvcs_struct lifetime */
+ int connected; /* is the vty-server currently connected to a vty? */
+ uint32_t p_unit_address; /* partner unit address */
+ uint32_t p_partition_ID; /* partner partition ID */
+ char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */
+ struct list_head next; /* list management */
+ struct vio_dev *vdev;
+};
+
+/* Required to back map a kref to its containing object */
+#define from_kref(k) container_of(k, struct hvcs_struct, kref)
+
+static LIST_HEAD(hvcs_structs);
+static DEFINE_SPINLOCK(hvcs_structs_lock);
+
+static void hvcs_unthrottle(struct tty_struct *tty);
+static void hvcs_throttle(struct tty_struct *tty);
+static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance);
+
+static int hvcs_write(struct tty_struct *tty,
+ const unsigned char *buf, int count);
+static int hvcs_write_room(struct tty_struct *tty);
+static int hvcs_chars_in_buffer(struct tty_struct *tty);
+
+static int hvcs_has_pi(struct hvcs_struct *hvcsd);
+static void hvcs_set_pi(struct hvcs_partner_info *pi,
+ struct hvcs_struct *hvcsd);
+static int hvcs_get_pi(struct hvcs_struct *hvcsd);
+static int hvcs_rescan_devices_list(void);
+
+static int hvcs_partner_connect(struct hvcs_struct *hvcsd);
+static void hvcs_partner_free(struct hvcs_struct *hvcsd);
+
+static int hvcs_enable_device(struct hvcs_struct *hvcsd,
+ uint32_t unit_address, unsigned int irq, struct vio_dev *dev);
+
+static int hvcs_open(struct tty_struct *tty, struct file *filp);
+static void hvcs_close(struct tty_struct *tty, struct file *filp);
+static void hvcs_hangup(struct tty_struct * tty);
+
+static int __devinit hvcs_probe(struct vio_dev *dev,
+ const struct vio_device_id *id);
+static int __devexit hvcs_remove(struct vio_dev *dev);
+static int __init hvcs_module_init(void);
+static void __exit hvcs_module_exit(void);
+
+#define HVCS_SCHED_READ 0x00000001
+#define HVCS_QUICK_READ 0x00000002
+#define HVCS_TRY_WRITE 0x00000004
+#define HVCS_READ_MASK (HVCS_SCHED_READ | HVCS_QUICK_READ)
+
+static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod)
+{
+ return dev_get_drvdata(&viod->dev);
+}
+/* The sysfs interface for the driver and devices */
+
+static ssize_t hvcs_partner_vtys_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%X\n", hvcsd->p_unit_address);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+static DEVICE_ATTR(partner_vtys, S_IRUGO, hvcs_partner_vtys_show, NULL);
+
+static ssize_t hvcs_partner_clcs_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+static DEVICE_ATTR(partner_clcs, S_IRUGO, hvcs_partner_clcs_show, NULL);
+
+static ssize_t hvcs_current_vty_store(struct device *dev, struct device_attribute *attr, const char * buf,
+ size_t count)
+{
+ /*
+ * Don't need this feature at the present time because firmware doesn't
+ * yet support multiple partners.
+ */
+ printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n");
+ return -EPERM;
+}
+
+static ssize_t hvcs_current_vty_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+
+static DEVICE_ATTR(current_vty,
+ S_IRUGO | S_IWUSR, hvcs_current_vty_show, hvcs_current_vty_store);
+
+static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+
+ /* writing a '0' to this sysfs entry will result in the disconnect. */
+ if (simple_strtol(buf, NULL, 0) != 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ if (hvcsd->open_count > 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_INFO "HVCS: vterm state unchanged. "
+ "The hvcs device node is still in use.\n");
+ return -EPERM;
+ }
+
+ if (hvcsd->connected == 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_INFO "HVCS: vterm state unchanged. The"
+ " vty-server is not connected to a vty.\n");
+ return -EPERM;
+ }
+
+ hvcs_partner_free(hvcsd);
+ printk(KERN_INFO "HVCS: Closed vty-server@%X and"
+ " partner vty@%X:%d connection.\n",
+ hvcsd->vdev->unit_address,
+ hvcsd->p_unit_address,
+ (uint32_t)hvcsd->p_partition_ID);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return count;
+}
+
+static ssize_t hvcs_vterm_state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%d\n", hvcsd->connected);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+static DEVICE_ATTR(vterm_state, S_IRUGO | S_IWUSR,
+ hvcs_vterm_state_show, hvcs_vterm_state_store);
+
+static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%d\n", hvcsd->index);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+
+static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
+
+static struct attribute *hvcs_attrs[] = {
+ &dev_attr_partner_vtys.attr,
+ &dev_attr_partner_clcs.attr,
+ &dev_attr_current_vty.attr,
+ &dev_attr_vterm_state.attr,
+ &dev_attr_index.attr,
+ NULL,
+};
+
+static struct attribute_group hvcs_attr_group = {
+ .attrs = hvcs_attrs,
+};
+
+static ssize_t hvcs_rescan_show(struct device_driver *ddp, char *buf)
+{
+ /* A 1 means it is updating, a 0 means it is done updating */
+ return snprintf(buf, PAGE_SIZE, "%d\n", hvcs_rescan_status);
+}
+
+static ssize_t hvcs_rescan_store(struct device_driver *ddp, const char * buf,
+ size_t count)
+{
+ if ((simple_strtol(buf, NULL, 0) != 1)
+ && (hvcs_rescan_status != 0))
+ return -EINVAL;
+
+ hvcs_rescan_status = 1;
+ printk(KERN_INFO "HVCS: rescanning partner info for all"
+ " vty-servers.\n");
+ hvcs_rescan_devices_list();
+ hvcs_rescan_status = 0;
+ return count;
+}
+
+static DRIVER_ATTR(rescan,
+ S_IRUGO | S_IWUSR, hvcs_rescan_show, hvcs_rescan_store);
+
+static void hvcs_kick(void)
+{
+ hvcs_kicked = 1;
+ wmb();
+ wake_up_process(hvcs_task);
+}
+
+static void hvcs_unthrottle(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ hvcs_kick();
+}
+
+static void hvcs_throttle(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_disable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+}
+
+/*
+ * If the device is being removed we don't have to worry about this interrupt
+ * handler taking any further interrupts because they are disabled which means
+ * the hvcs_struct will always be valid in this handler.
+ */
+static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance)
+{
+ struct hvcs_struct *hvcsd = dev_instance;
+
+ spin_lock(&hvcsd->lock);
+ vio_disable_interrupts(hvcsd->vdev);
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock(&hvcsd->lock);
+ hvcs_kick();
+
+ return IRQ_HANDLED;
+}
+
+/* This function must be called with the hvcsd->lock held */
+static void hvcs_try_write(struct hvcs_struct *hvcsd)
+{
+ uint32_t unit_address = hvcsd->vdev->unit_address;
+ struct tty_struct *tty = hvcsd->tty;
+ int sent;
+
+ if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
+ /* won't send partial writes */
+ sent = hvc_put_chars(unit_address,
+ &hvcsd->buffer[0],
+ hvcsd->chars_in_buffer );
+ if (sent > 0) {
+ hvcsd->chars_in_buffer = 0;
+ /* wmb(); */
+ hvcsd->todo_mask &= ~(HVCS_TRY_WRITE);
+ /* wmb(); */
+
+ /*
+ * We are still obligated to deliver the data to the
+ * hypervisor even if the tty has been closed because
+ * we commited to delivering it. But don't try to wake
+ * a non-existent tty.
+ */
+ if (tty) {
+ tty_wakeup(tty);
+ }
+ }
+ }
+}
+
+static int hvcs_io(struct hvcs_struct *hvcsd)
+{
+ uint32_t unit_address;
+ struct tty_struct *tty;
+ char buf[HVCS_BUFF_LEN] __ALIGNED__;
+ unsigned long flags;
+ int got = 0;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ unit_address = hvcsd->vdev->unit_address;
+ tty = hvcsd->tty;
+
+ hvcs_try_write(hvcsd);
+
+ if (!tty || test_bit(TTY_THROTTLED, &tty->flags)) {
+ hvcsd->todo_mask &= ~(HVCS_READ_MASK);
+ goto bail;
+ } else if (!(hvcsd->todo_mask & (HVCS_READ_MASK)))
+ goto bail;
+
+ /* remove the read masks */
+ hvcsd->todo_mask &= ~(HVCS_READ_MASK);
+
+ if (tty_buffer_request_room(tty, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) {
+ got = hvc_get_chars(unit_address,
+ &buf[0],
+ HVCS_BUFF_LEN);
+ tty_insert_flip_string(tty, buf, got);
+ }
+
+ /* Give the TTY time to process the data we just sent. */
+ if (got)
+ hvcsd->todo_mask |= HVCS_QUICK_READ;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ /* This is synch because tty->low_latency == 1 */
+ if(got)
+ tty_flip_buffer_push(tty);
+
+ if (!got) {
+ /* Do this _after_ the flip_buffer_push */
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_enable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+
+ return hvcsd->todo_mask;
+
+ bail:
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return hvcsd->todo_mask;
+}
+
+static int khvcsd(void *unused)
+{
+ struct hvcs_struct *hvcsd;
+ int hvcs_todo_mask;
+
+ __set_current_state(TASK_RUNNING);
+
+ do {
+ hvcs_todo_mask = 0;
+ hvcs_kicked = 0;
+ wmb();
+
+ spin_lock(&hvcs_structs_lock);
+ list_for_each_entry(hvcsd, &hvcs_structs, next) {
+ hvcs_todo_mask |= hvcs_io(hvcsd);
+ }
+ spin_unlock(&hvcs_structs_lock);
+
+ /*
+ * If any of the hvcs adapters want to try a write or quick read
+ * don't schedule(), yield a smidgen then execute the hvcs_io
+ * thread again for those that want the write.
+ */
+ if (hvcs_todo_mask & (HVCS_TRY_WRITE | HVCS_QUICK_READ)) {
+ yield();
+ continue;
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!hvcs_kicked)
+ schedule();
+ __set_current_state(TASK_RUNNING);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+static struct vio_device_id hvcs_driver_table[] __devinitdata= {
+ {"serial-server", "hvterm2"},
+ { "", "" }
+};
+MODULE_DEVICE_TABLE(vio, hvcs_driver_table);
+
+static void hvcs_return_index(int index)
+{
+ /* Paranoia check */
+ if (!hvcs_index_list)
+ return;
+ if (index < 0 || index >= hvcs_index_count)
+ return;
+ if (hvcs_index_list[index] == -1)
+ return;
+ else
+ hvcs_index_list[index] = -1;
+}
+
+/* callback when the kref ref count reaches zero */
+static void destroy_hvcs_struct(struct kref *kref)
+{
+ struct hvcs_struct *hvcsd = from_kref(kref);
+ struct vio_dev *vdev;
+ unsigned long flags;
+
+ spin_lock(&hvcs_structs_lock);
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ /* the list_del poisons the pointers */
+ list_del(&(hvcsd->next));
+
+ if (hvcsd->connected == 1) {
+ hvcs_partner_free(hvcsd);
+ printk(KERN_INFO "HVCS: Closed vty-server@%X and"
+ " partner vty@%X:%d connection.\n",
+ hvcsd->vdev->unit_address,
+ hvcsd->p_unit_address,
+ (uint32_t)hvcsd->p_partition_ID);
+ }
+ printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n",
+ hvcsd->vdev->unit_address);
+
+ vdev = hvcsd->vdev;
+ hvcsd->vdev = NULL;
+
+ hvcsd->p_unit_address = 0;
+ hvcsd->p_partition_ID = 0;
+ hvcs_return_index(hvcsd->index);
+ memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ spin_unlock(&hvcs_structs_lock);
+
+ sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group);
+
+ kfree(hvcsd);
+}
+
+static int hvcs_get_index(void)
+{
+ int i;
+ /* Paranoia check */
+ if (!hvcs_index_list) {
+ printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n");
+ return -EFAULT;
+ }
+ /* Find the numerically lowest first free index. */
+ for(i = 0; i < hvcs_index_count; i++) {
+ if (hvcs_index_list[i] == -1) {
+ hvcs_index_list[i] = 0;
+ return i;
+ }
+ }
+ return -1;
+}
+
+static int __devinit hvcs_probe(
+ struct vio_dev *dev,
+ const struct vio_device_id *id)
+{
+ struct hvcs_struct *hvcsd;
+ int index;
+ int retval;
+
+ if (!dev || !id) {
+ printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
+ return -EPERM;
+ }
+
+ /* early to avoid cleanup on failure */
+ index = hvcs_get_index();
+ if (index < 0) {
+ return -EFAULT;
+ }
+
+ hvcsd = kzalloc(sizeof(*hvcsd), GFP_KERNEL);
+ if (!hvcsd)
+ return -ENODEV;
+
+
+ spin_lock_init(&hvcsd->lock);
+ /* Automatically incs the refcount the first time */
+ kref_init(&hvcsd->kref);
+
+ hvcsd->vdev = dev;
+ dev_set_drvdata(&dev->dev, hvcsd);
+
+ hvcsd->index = index;
+
+ /* hvcsd->index = ++hvcs_struct_count; */
+ hvcsd->chars_in_buffer = 0;
+ hvcsd->todo_mask = 0;
+ hvcsd->connected = 0;
+
+ /*
+ * This will populate the hvcs_struct's partner info fields for the
+ * first time.
+ */
+ if (hvcs_get_pi(hvcsd)) {
+ printk(KERN_ERR "HVCS: Failed to fetch partner"
+ " info for vty-server@%X on device probe.\n",
+ hvcsd->vdev->unit_address);
+ }
+
+ /*
+ * If a user app opens a tty that corresponds to this vty-server before
+ * the hvcs_struct has been added to the devices list then the user app
+ * will get -ENODEV.
+ */
+ spin_lock(&hvcs_structs_lock);
+ list_add_tail(&(hvcsd->next), &hvcs_structs);
+ spin_unlock(&hvcs_structs_lock);
+
+ retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group);
+ if (retval) {
+ printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n",
+ hvcsd->vdev->unit_address);
+ return retval;
+ }
+
+ printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address);
+
+ /*
+ * DON'T enable interrupts here because there is no user to receive the
+ * data.
+ */
+ return 0;
+}
+
+static int __devexit hvcs_remove(struct vio_dev *dev)
+{
+ struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
+ unsigned long flags;
+ struct tty_struct *tty;
+
+ if (!hvcsd)
+ return -ENODEV;
+
+ /* By this time the vty-server won't be getting any more interrupts */
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ tty = hvcsd->tty;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /*
+ * Let the last holder of this object cause it to be removed, which
+ * would probably be tty_hangup below.
+ */
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+
+ /*
+ * The hangup is a scheduled function which will auto chain call
+ * hvcs_hangup. The tty should always be valid at this time unless a
+ * simultaneous tty close already cleaned up the hvcs_struct.
+ */
+ if (tty)
+ tty_hangup(tty);
+
+ printk(KERN_INFO "HVCS: vty-server@%X removed from the"
+ " vio bus.\n", dev->unit_address);
+ return 0;
+};
+
+static struct vio_driver hvcs_vio_driver = {
+ .id_table = hvcs_driver_table,
+ .probe = hvcs_probe,
+ .remove = __devexit_p(hvcs_remove),
+ .driver = {
+ .name = hvcs_driver_name,
+ .owner = THIS_MODULE,
+ }
+};
+
+/* Only called from hvcs_get_pi please */
+static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd)
+{
+ int clclength;
+
+ hvcsd->p_unit_address = pi->unit_address;
+ hvcsd->p_partition_ID = pi->partition_ID;
+ clclength = strlen(&pi->location_code[0]);
+ if (clclength > HVCS_CLC_LENGTH)
+ clclength = HVCS_CLC_LENGTH;
+
+ /* copy the null-term char too */
+ strncpy(&hvcsd->p_location_code[0],
+ &pi->location_code[0], clclength + 1);
+}
+
+/*
+ * Traverse the list and add the partner info that is found to the hvcs_struct
+ * struct entry. NOTE: At this time I know that partner info will return a
+ * single entry but in the future there may be multiple partner info entries per
+ * vty-server and you'll want to zero out that list and reset it. If for some
+ * reason you have an old version of this driver but there IS more than one
+ * partner info then hvcsd->p_* will hold the last partner info data from the
+ * firmware query. A good way to update this code would be to replace the three
+ * partner info fields in hvcs_struct with a list of hvcs_partner_info
+ * instances.
+ *
+ * This function must be called with the hvcsd->lock held.
+ */
+static int hvcs_get_pi(struct hvcs_struct *hvcsd)
+{
+ struct hvcs_partner_info *pi;
+ uint32_t unit_address = hvcsd->vdev->unit_address;
+ struct list_head head;
+ int retval;
+
+ spin_lock(&hvcs_pi_lock);
+ if (!hvcs_pi_buff) {
+ spin_unlock(&hvcs_pi_lock);
+ return -EFAULT;
+ }
+ retval = hvcs_get_partner_info(unit_address, &head, hvcs_pi_buff);
+ spin_unlock(&hvcs_pi_lock);
+ if (retval) {
+ printk(KERN_ERR "HVCS: Failed to fetch partner"
+ " info for vty-server@%x.\n", unit_address);
+ return retval;
+ }
+
+ /* nixes the values if the partner vty went away */
+ hvcsd->p_unit_address = 0;
+ hvcsd->p_partition_ID = 0;
+
+ list_for_each_entry(pi, &head, node)
+ hvcs_set_pi(pi, hvcsd);
+
+ hvcs_free_partner_info(&head);
+ return 0;
+}
+
+/*
+ * This function is executed by the driver "rescan" sysfs entry. It shouldn't
+ * be executed elsewhere, in order to prevent deadlock issues.
+ */
+static int hvcs_rescan_devices_list(void)
+{
+ struct hvcs_struct *hvcsd;
+ unsigned long flags;
+
+ spin_lock(&hvcs_structs_lock);
+
+ list_for_each_entry(hvcsd, &hvcs_structs, next) {
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcs_get_pi(hvcsd);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+
+ spin_unlock(&hvcs_structs_lock);
+
+ return 0;
+}
+
+/*
+ * Farm this off into its own function because it could be more complex once
+ * multiple partners support is added. This function should be called with
+ * the hvcsd->lock held.
+ */
+static int hvcs_has_pi(struct hvcs_struct *hvcsd)
+{
+ if ((!hvcsd->p_unit_address) || (!hvcsd->p_partition_ID))
+ return 0;
+ return 1;
+}
+
+/*
+ * NOTE: It is possible that the super admin removed a partner vty and then
+ * added a different vty as the new partner.
+ *
+ * This function must be called with the hvcsd->lock held.
+ */
+static int hvcs_partner_connect(struct hvcs_struct *hvcsd)
+{
+ int retval;
+ unsigned int unit_address = hvcsd->vdev->unit_address;
+
+ /*
+ * If there wasn't any pi when the device was added it doesn't meant
+ * there isn't any now. This driver isn't notified when a new partner
+ * vty is added to a vty-server so we discover changes on our own.
+ * Please see comments in hvcs_register_connection() for justification
+ * of this bizarre code.
+ */
+ retval = hvcs_register_connection(unit_address,
+ hvcsd->p_partition_ID,
+ hvcsd->p_unit_address);
+ if (!retval) {
+ hvcsd->connected = 1;
+ return 0;
+ } else if (retval != -EINVAL)
+ return retval;
+
+ /*
+ * As per the spec re-get the pi and try again if -EINVAL after the
+ * first connection attempt.
+ */
+ if (hvcs_get_pi(hvcsd))
+ return -ENOMEM;
+
+ if (!hvcs_has_pi(hvcsd))
+ return -ENODEV;
+
+ retval = hvcs_register_connection(unit_address,
+ hvcsd->p_partition_ID,
+ hvcsd->p_unit_address);
+ if (retval != -EINVAL) {
+ hvcsd->connected = 1;
+ return retval;
+ }
+
+ /*
+ * EBUSY is the most likely scenario though the vty could have been
+ * removed or there really could be an hcall error due to the parameter
+ * data but thanks to ambiguous firmware return codes we can't really
+ * tell.
+ */
+ printk(KERN_INFO "HVCS: vty-server or partner"
+ " vty is busy. Try again later.\n");
+ return -EBUSY;
+}
+
+/* This function must be called with the hvcsd->lock held */
+static void hvcs_partner_free(struct hvcs_struct *hvcsd)
+{
+ int retval;
+ do {
+ retval = hvcs_free_connection(hvcsd->vdev->unit_address);
+ } while (retval == -EBUSY);
+ hvcsd->connected = 0;
+}
+
+/* This helper function must be called WITHOUT the hvcsd->lock held */
+static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
+ unsigned int irq, struct vio_dev *vdev)
+{
+ unsigned long flags;
+ int rc;
+
+ /*
+ * It is possible that the vty-server was removed between the time that
+ * the conn was registered and now.
+ */
+ if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
+ IRQF_DISABLED, "ibmhvcs", hvcsd))) {
+ /*
+ * It is possible the vty-server was removed after the irq was
+ * requested but before we have time to enable interrupts.
+ */
+ if (vio_enable_interrupts(vdev) == H_SUCCESS)
+ return 0;
+ else {
+ printk(KERN_ERR "HVCS: int enable failed for"
+ " vty-server@%X.\n", unit_address);
+ free_irq(irq, hvcsd);
+ }
+ } else
+ printk(KERN_ERR "HVCS: irq req failed for"
+ " vty-server@%X.\n", unit_address);
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcs_partner_free(hvcsd);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ return rc;
+
+}
+
+/*
+ * This always increments the kref ref count if the call is successful.
+ * Please remember to dec when you are done with the instance.
+ *
+ * NOTICE: Do NOT hold either the hvcs_struct.lock or hvcs_structs_lock when
+ * calling this function or you will get deadlock.
+ */
+static struct hvcs_struct *hvcs_get_by_index(int index)
+{
+ struct hvcs_struct *hvcsd = NULL;
+ unsigned long flags;
+
+ spin_lock(&hvcs_structs_lock);
+ /* We can immediately discard OOB requests */
+ if (index >= 0 && index < HVCS_MAX_SERVER_ADAPTERS) {
+ list_for_each_entry(hvcsd, &hvcs_structs, next) {
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ if (hvcsd->index == index) {
+ kref_get(&hvcsd->kref);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ spin_unlock(&hvcs_structs_lock);
+ return hvcsd;
+ }
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+ hvcsd = NULL;
+ }
+
+ spin_unlock(&hvcs_structs_lock);
+ return hvcsd;
+}
+
+/*
+ * This is invoked via the tty_open interface when a user app connects to the
+ * /dev node.
+ */
+static int hvcs_open(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd;
+ int rc, retval = 0;
+ unsigned long flags;
+ unsigned int irq;
+ struct vio_dev *vdev;
+ unsigned long unit_address;
+
+ if (tty->driver_data)
+ goto fast_open;
+
+ /*
+ * Is there a vty-server that shares the same index?
+ * This function increments the kref index.
+ */
+ if (!(hvcsd = hvcs_get_by_index(tty->index))) {
+ printk(KERN_WARNING "HVCS: open failed, no device associated"
+ " with tty->index %d.\n", tty->index);
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ if (hvcsd->connected == 0)
+ if ((retval = hvcs_partner_connect(hvcsd)))
+ goto error_release;
+
+ hvcsd->open_count = 1;
+ hvcsd->tty = tty;
+ tty->driver_data = hvcsd;
+
+ memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
+
+ /*
+ * Save these in the spinlock for the enable operations that need them
+ * outside of the spinlock.
+ */
+ irq = hvcsd->vdev->irq;
+ vdev = hvcsd->vdev;
+ unit_address = hvcsd->vdev->unit_address;
+
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /*
+ * This must be done outside of the spinlock because it requests irqs
+ * and will grab the spinlock and free the connection if it fails.
+ */
+ if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ printk(KERN_WARNING "HVCS: enable device failed.\n");
+ return rc;
+ }
+
+ goto open_success;
+
+fast_open:
+ hvcsd = tty->driver_data;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ kref_get(&hvcsd->kref);
+ hvcsd->open_count++;
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+open_success:
+ hvcs_kick();
+
+ printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n",
+ hvcsd->vdev->unit_address );
+
+ return 0;
+
+error_release:
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+
+ printk(KERN_WARNING "HVCS: partner connect failed.\n");
+ return retval;
+}
+
+static void hvcs_close(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd;
+ unsigned long flags;
+ int irq = NO_IRQ;
+
+ /*
+ * Is someone trying to close the file associated with this device after
+ * we have hung up? If so tty->driver_data wouldn't be valid.
+ */
+ if (tty_hung_up_p(filp))
+ return;
+
+ /*
+ * No driver_data means that this close was probably issued after a
+ * failed hvcs_open by the tty layer's release_dev() api and we can just
+ * exit cleanly.
+ */
+ if (!tty->driver_data)
+ return;
+
+ hvcsd = tty->driver_data;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ if (--hvcsd->open_count == 0) {
+
+ vio_disable_interrupts(hvcsd->vdev);
+
+ /*
+ * NULL this early so that the kernel_thread doesn't try to
+ * execute any operations on the TTY even though it is obligated
+ * to deliver any pending I/O to the hypervisor.
+ */
+ hvcsd->tty = NULL;
+
+ irq = hvcsd->vdev->irq;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
+
+ /*
+ * This line is important because it tells hvcs_open that this
+ * device needs to be re-configured the next time hvcs_open is
+ * called.
+ */
+ tty->driver_data = NULL;
+
+ free_irq(irq, hvcsd);
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ return;
+ } else if (hvcsd->open_count < 0) {
+ printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
+ " is missmanaged.\n",
+ hvcsd->vdev->unit_address, hvcsd->open_count);
+ }
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+}
+
+static void hvcs_hangup(struct tty_struct * tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned long flags;
+ int temp_open_count;
+ int irq = NO_IRQ;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ /* Preserve this so that we know how many kref refs to put */
+ temp_open_count = hvcsd->open_count;
+
+ /*
+ * Don't kref put inside the spinlock because the destruction
+ * callback may use the spinlock and it may get called before the
+ * spinlock has been released.
+ */
+ vio_disable_interrupts(hvcsd->vdev);
+
+ hvcsd->todo_mask = 0;
+
+ /* I don't think the tty needs the hvcs_struct pointer after a hangup */
+ hvcsd->tty->driver_data = NULL;
+ hvcsd->tty = NULL;
+
+ hvcsd->open_count = 0;
+
+ /* This will drop any buffered data on the floor which is OK in a hangup
+ * scenario. */
+ memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
+ hvcsd->chars_in_buffer = 0;
+
+ irq = hvcsd->vdev->irq;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ free_irq(irq, hvcsd);
+
+ /*
+ * We need to kref_put() for every open_count we have since the
+ * tty_hangup() function doesn't invoke a close per open connection on a
+ * non-console device.
+ */
+ while(temp_open_count) {
+ --temp_open_count;
+ /*
+ * The final put will trigger destruction of the hvcs_struct.
+ * NOTE: If this hangup was signaled from user space then the
+ * final put will never happen.
+ */
+ kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ }
+}
+
+/*
+ * NOTE: This is almost always from_user since user level apps interact with the
+ * /dev nodes. I'm trusting that if hvcs_write gets called and interrupted by
+ * hvcs_remove (which removes the target device and executes tty_hangup()) that
+ * tty_hangup will allow hvcs_write time to complete execution before it
+ * terminates our device.
+ */
+static int hvcs_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned int unit_address;
+ const unsigned char *charbuf;
+ unsigned long flags;
+ int total_sent = 0;
+ int tosend = 0;
+ int result = 0;
+
+ /*
+ * If they don't check the return code off of their open they may
+ * attempt this even if there is no connected device.
+ */
+ if (!hvcsd)
+ return -ENODEV;
+
+ /* Reasonable size to prevent user level flooding */
+ if (count > HVCS_MAX_FROM_USER) {
+ printk(KERN_WARNING "HVCS write: count being truncated to"
+ " HVCS_MAX_FROM_USER.\n");
+ count = HVCS_MAX_FROM_USER;
+ }
+
+ charbuf = buf;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ /*
+ * Somehow an open succedded but the device was removed or the
+ * connection terminated between the vty-server and partner vty during
+ * the middle of a write operation? This is a crummy place to do this
+ * but we want to keep it all in the spinlock.
+ */
+ if (hvcsd->open_count <= 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return -ENODEV;
+ }
+
+ unit_address = hvcsd->vdev->unit_address;
+
+ while (count > 0) {
+ tosend = min(count, (HVCS_BUFF_LEN - hvcsd->chars_in_buffer));
+ /*
+ * No more space, this probably means that the last call to
+ * hvcs_write() didn't succeed and the buffer was filled up.
+ */
+ if (!tosend)
+ break;
+
+ memcpy(&hvcsd->buffer[hvcsd->chars_in_buffer],
+ &charbuf[total_sent],
+ tosend);
+
+ hvcsd->chars_in_buffer += tosend;
+
+ result = 0;
+
+ /*
+ * If this is true then we don't want to try writing to the
+ * hypervisor because that is the kernel_threads job now. We'll
+ * just add to the buffer.
+ */
+ if (!(hvcsd->todo_mask & HVCS_TRY_WRITE))
+ /* won't send partial writes */
+ result = hvc_put_chars(unit_address,
+ &hvcsd->buffer[0],
+ hvcsd->chars_in_buffer);
+
+ /*
+ * Since we know we have enough room in hvcsd->buffer for
+ * tosend we record that it was sent regardless of whether the
+ * hypervisor actually took it because we have it buffered.
+ */
+ total_sent+=tosend;
+ count-=tosend;
+ if (result == 0) {
+ hvcsd->todo_mask |= HVCS_TRY_WRITE;
+ hvcs_kick();
+ break;
+ }
+
+ hvcsd->chars_in_buffer = 0;
+ /*
+ * Test after the chars_in_buffer reset otherwise this could
+ * deadlock our writes if hvc_put_chars fails.
+ */
+ if (result < 0)
+ break;
+ }
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ if (result == -1)
+ return -EIO;
+ else
+ return total_sent;
+}
+
+/*
+ * This is really asking how much can we guarentee that we can send or that we
+ * absolutely WILL BUFFER if we can't send it. This driver MUST honor the
+ * return value, hence the reason for hvcs_struct buffering.
+ */
+static int hvcs_write_room(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+
+ if (!hvcsd || hvcsd->open_count <= 0)
+ return 0;
+
+ return HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
+}
+
+static int hvcs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+
+ return hvcsd->chars_in_buffer;
+}
+
+static const struct tty_operations hvcs_ops = {
+ .open = hvcs_open,
+ .close = hvcs_close,
+ .hangup = hvcs_hangup,
+ .write = hvcs_write,
+ .write_room = hvcs_write_room,
+ .chars_in_buffer = hvcs_chars_in_buffer,
+ .unthrottle = hvcs_unthrottle,
+ .throttle = hvcs_throttle,
+};
+
+static int hvcs_alloc_index_list(int n)
+{
+ int i;
+
+ hvcs_index_list = kmalloc(n * sizeof(hvcs_index_count),GFP_KERNEL);
+ if (!hvcs_index_list)
+ return -ENOMEM;
+ hvcs_index_count = n;
+ for (i = 0; i < hvcs_index_count; i++)
+ hvcs_index_list[i] = -1;
+ return 0;
+}
+
+static void hvcs_free_index_list(void)
+{
+ /* Paranoia check to be thorough. */
+ kfree(hvcs_index_list);
+ hvcs_index_list = NULL;
+ hvcs_index_count = 0;
+}
+
+static int __init hvcs_module_init(void)
+{
+ int rc;
+ int num_ttys_to_alloc;
+
+ printk(KERN_INFO "Initializing %s\n", hvcs_driver_string);
+
+ /* Has the user specified an overload with an insmod param? */
+ if (hvcs_parm_num_devs <= 0 ||
+ (hvcs_parm_num_devs > HVCS_MAX_SERVER_ADAPTERS)) {
+ num_ttys_to_alloc = HVCS_DEFAULT_SERVER_ADAPTERS;
+ } else
+ num_ttys_to_alloc = hvcs_parm_num_devs;
+
+ hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc);
+ if (!hvcs_tty_driver)
+ return -ENOMEM;
+
+ if (hvcs_alloc_index_list(num_ttys_to_alloc)) {
+ rc = -ENOMEM;
+ goto index_fail;
+ }
+
+ hvcs_tty_driver->owner = THIS_MODULE;
+
+ hvcs_tty_driver->driver_name = hvcs_driver_name;
+ hvcs_tty_driver->name = hvcs_device_node;
+
+ /*
+ * We'll let the system assign us a major number, indicated by leaving
+ * it blank.
+ */
+
+ hvcs_tty_driver->minor_start = HVCS_MINOR_START;
+ hvcs_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+
+ /*
+ * We role our own so that we DONT ECHO. We can't echo because the
+ * device we are connecting to already echoes by default and this would
+ * throw us into a horrible recursive echo-echo-echo loop.
+ */
+ hvcs_tty_driver->init_termios = hvcs_tty_termios;
+ hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW;
+
+ tty_set_operations(hvcs_tty_driver, &hvcs_ops);
+
+ /*
+ * The following call will result in sysfs entries that denote the
+ * dynamically assigned major and minor numbers for our devices.
+ */
+ if (tty_register_driver(hvcs_tty_driver)) {
+ printk(KERN_ERR "HVCS: registration as a tty driver failed.\n");
+ rc = -EIO;
+ goto register_fail;
+ }
+
+ hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!hvcs_pi_buff) {
+ rc = -ENOMEM;
+ goto buff_alloc_fail;
+ }
+
+ hvcs_task = kthread_run(khvcsd, NULL, "khvcsd");
+ if (IS_ERR(hvcs_task)) {
+ printk(KERN_ERR "HVCS: khvcsd creation failed. Driver not loaded.\n");
+ rc = -EIO;
+ goto kthread_fail;
+ }
+
+ rc = vio_register_driver(&hvcs_vio_driver);
+ if (rc) {
+ printk(KERN_ERR "HVCS: can't register vio driver\n");
+ goto vio_fail;
+ }
+
+ /*
+ * This needs to be done AFTER the vio_register_driver() call or else
+ * the kobjects won't be initialized properly.
+ */
+ rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
+ if (rc) {
+ printk(KERN_ERR "HVCS: sysfs attr create failed\n");
+ goto attr_fail;
+ }
+
+ printk(KERN_INFO "HVCS: driver module inserted.\n");
+
+ return 0;
+
+attr_fail:
+ vio_unregister_driver(&hvcs_vio_driver);
+vio_fail:
+ kthread_stop(hvcs_task);
+kthread_fail:
+ kfree(hvcs_pi_buff);
+buff_alloc_fail:
+ tty_unregister_driver(hvcs_tty_driver);
+register_fail:
+ hvcs_free_index_list();
+index_fail:
+ put_tty_driver(hvcs_tty_driver);
+ hvcs_tty_driver = NULL;
+ return rc;
+}
+
+static void __exit hvcs_module_exit(void)
+{
+ /*
+ * This driver receives hvcs_remove callbacks for each device upon
+ * module removal.
+ */
+
+ /*
+ * This synchronous operation will wake the khvcsd kthread if it is
+ * asleep and will return when khvcsd has terminated.
+ */
+ kthread_stop(hvcs_task);
+
+ spin_lock(&hvcs_pi_lock);
+ kfree(hvcs_pi_buff);
+ hvcs_pi_buff = NULL;
+ spin_unlock(&hvcs_pi_lock);
+
+ driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan);
+
+ vio_unregister_driver(&hvcs_vio_driver);
+
+ tty_unregister_driver(hvcs_tty_driver);
+
+ hvcs_free_index_list();
+
+ put_tty_driver(hvcs_tty_driver);
+
+ printk(KERN_INFO "HVCS: driver module removed.\n");
+}
+
+module_init(hvcs_module_init);
+module_exit(hvcs_module_exit);
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
new file mode 100644
index 000000000000..67a75a502c01
--- /dev/null
+++ b/drivers/tty/hvc/hvsi.c
@@ -0,0 +1,1314 @@
+/*
+ * Copyright (C) 2004 Hollis Blanchard <hollisb@us.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS
+ * and the service processor on IBM pSeries servers. On these servers, there
+ * are no serial ports under the OS's control, and sometimes there is no other
+ * console available either. However, the service processor has two standard
+ * serial ports, so this over-complicated protocol allows the OS to control
+ * those ports by proxy.
+ *
+ * Besides data, the procotol supports the reading/writing of the serial
+ * port's DTR line, and the reading of the CD line. This is to allow the OS to
+ * control a modem attached to the service processor's serial port. Note that
+ * the OS cannot change the speed of the port through this protocol.
+ */
+
+#undef DEBUG
+
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <asm/hvcall.h>
+#include <asm/hvconsole.h>
+#include <asm/prom.h>
+#include <asm/uaccess.h>
+#include <asm/vio.h>
+#include <asm/param.h>
+
+#define HVSI_MAJOR 229
+#define HVSI_MINOR 128
+#define MAX_NR_HVSI_CONSOLES 4
+
+#define HVSI_TIMEOUT (5*HZ)
+#define HVSI_VERSION 1
+#define HVSI_MAX_PACKET 256
+#define HVSI_MAX_READ 16
+#define HVSI_MAX_OUTGOING_DATA 12
+#define N_OUTBUF 12
+
+/*
+ * we pass data via two 8-byte registers, so we would like our char arrays
+ * properly aligned for those loads.
+ */
+#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
+
+struct hvsi_struct {
+ struct delayed_work writer;
+ struct work_struct handshaker;
+ wait_queue_head_t emptyq; /* woken when outbuf is emptied */
+ wait_queue_head_t stateq; /* woken when HVSI state changes */
+ spinlock_t lock;
+ int index;
+ struct tty_struct *tty;
+ int count;
+ uint8_t throttle_buf[128];
+ uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */
+ /* inbuf is for packet reassembly. leave a little room for leftovers. */
+ uint8_t inbuf[HVSI_MAX_PACKET + HVSI_MAX_READ];
+ uint8_t *inbuf_end;
+ int n_throttle;
+ int n_outbuf;
+ uint32_t vtermno;
+ uint32_t virq;
+ atomic_t seqno; /* HVSI packet sequence number */
+ uint16_t mctrl;
+ uint8_t state; /* HVSI protocol state */
+ uint8_t flags;
+#ifdef CONFIG_MAGIC_SYSRQ
+ uint8_t sysrq;
+#endif /* CONFIG_MAGIC_SYSRQ */
+};
+static struct hvsi_struct hvsi_ports[MAX_NR_HVSI_CONSOLES];
+
+static struct tty_driver *hvsi_driver;
+static int hvsi_count;
+static int (*hvsi_wait)(struct hvsi_struct *hp, int state);
+
+enum HVSI_PROTOCOL_STATE {
+ HVSI_CLOSED,
+ HVSI_WAIT_FOR_VER_RESPONSE,
+ HVSI_WAIT_FOR_VER_QUERY,
+ HVSI_OPEN,
+ HVSI_WAIT_FOR_MCTRL_RESPONSE,
+ HVSI_FSP_DIED,
+};
+#define HVSI_CONSOLE 0x1
+
+#define VS_DATA_PACKET_HEADER 0xff
+#define VS_CONTROL_PACKET_HEADER 0xfe
+#define VS_QUERY_PACKET_HEADER 0xfd
+#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc
+
+/* control verbs */
+#define VSV_SET_MODEM_CTL 1 /* to service processor only */
+#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */
+#define VSV_CLOSE_PROTOCOL 3
+
+/* query verbs */
+#define VSV_SEND_VERSION_NUMBER 1
+#define VSV_SEND_MODEM_CTL_STATUS 2
+
+/* yes, these masks are not consecutive. */
+#define HVSI_TSDTR 0x01
+#define HVSI_TSCD 0x20
+
+struct hvsi_header {
+ uint8_t type;
+ uint8_t len;
+ uint16_t seqno;
+} __attribute__((packed));
+
+struct hvsi_data {
+ uint8_t type;
+ uint8_t len;
+ uint16_t seqno;
+ uint8_t data[HVSI_MAX_OUTGOING_DATA];
+} __attribute__((packed));
+
+struct hvsi_control {
+ uint8_t type;
+ uint8_t len;
+ uint16_t seqno;
+ uint16_t verb;
+ /* optional depending on verb: */
+ uint32_t word;
+ uint32_t mask;
+} __attribute__((packed));
+
+struct hvsi_query {
+ uint8_t type;
+ uint8_t len;
+ uint16_t seqno;
+ uint16_t verb;
+} __attribute__((packed));
+
+struct hvsi_query_response {
+ uint8_t type;
+ uint8_t len;
+ uint16_t seqno;
+ uint16_t verb;
+ uint16_t query_seqno;
+ union {
+ uint8_t version;
+ uint32_t mctrl_word;
+ } u;
+} __attribute__((packed));
+
+
+
+static inline int is_console(struct hvsi_struct *hp)
+{
+ return hp->flags & HVSI_CONSOLE;
+}
+
+static inline int is_open(struct hvsi_struct *hp)
+{
+ /* if we're waiting for an mctrl then we're already open */
+ return (hp->state == HVSI_OPEN)
+ || (hp->state == HVSI_WAIT_FOR_MCTRL_RESPONSE);
+}
+
+static inline void print_state(struct hvsi_struct *hp)
+{
+#ifdef DEBUG
+ static const char *state_names[] = {
+ "HVSI_CLOSED",
+ "HVSI_WAIT_FOR_VER_RESPONSE",
+ "HVSI_WAIT_FOR_VER_QUERY",
+ "HVSI_OPEN",
+ "HVSI_WAIT_FOR_MCTRL_RESPONSE",
+ "HVSI_FSP_DIED",
+ };
+ const char *name = (hp->state < ARRAY_SIZE(state_names))
+ ? state_names[hp->state] : "UNKNOWN";
+
+ pr_debug("hvsi%i: state = %s\n", hp->index, name);
+#endif /* DEBUG */
+}
+
+static inline void __set_state(struct hvsi_struct *hp, int state)
+{
+ hp->state = state;
+ print_state(hp);
+ wake_up_all(&hp->stateq);
+}
+
+static inline void set_state(struct hvsi_struct *hp, int state)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ __set_state(hp, state);
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
+
+static inline int len_packet(const uint8_t *packet)
+{
+ return (int)((struct hvsi_header *)packet)->len;
+}
+
+static inline int is_header(const uint8_t *packet)
+{
+ struct hvsi_header *header = (struct hvsi_header *)packet;
+ return header->type >= VS_QUERY_RESPONSE_PACKET_HEADER;
+}
+
+static inline int got_packet(const struct hvsi_struct *hp, uint8_t *packet)
+{
+ if (hp->inbuf_end < packet + sizeof(struct hvsi_header))
+ return 0; /* don't even have the packet header */
+
+ if (hp->inbuf_end < (packet + len_packet(packet)))
+ return 0; /* don't have the rest of the packet */
+
+ return 1;
+}
+
+/* shift remaining bytes in packetbuf down */
+static void compact_inbuf(struct hvsi_struct *hp, uint8_t *read_to)
+{
+ int remaining = (int)(hp->inbuf_end - read_to);
+
+ pr_debug("%s: %i chars remain\n", __func__, remaining);
+
+ if (read_to != hp->inbuf)
+ memmove(hp->inbuf, read_to, remaining);
+
+ hp->inbuf_end = hp->inbuf + remaining;
+}
+
+#ifdef DEBUG
+#define dbg_dump_packet(packet) dump_packet(packet)
+#define dbg_dump_hex(data, len) dump_hex(data, len)
+#else
+#define dbg_dump_packet(packet) do { } while (0)
+#define dbg_dump_hex(data, len) do { } while (0)
+#endif
+
+static void dump_hex(const uint8_t *data, int len)
+{
+ int i;
+
+ printk(" ");
+ for (i=0; i < len; i++)
+ printk("%.2x", data[i]);
+
+ printk("\n ");
+ for (i=0; i < len; i++) {
+ if (isprint(data[i]))
+ printk("%c", data[i]);
+ else
+ printk(".");
+ }
+ printk("\n");
+}
+
+static void dump_packet(uint8_t *packet)
+{
+ struct hvsi_header *header = (struct hvsi_header *)packet;
+
+ printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len,
+ header->seqno);
+
+ dump_hex(packet, header->len);
+}
+
+static int hvsi_read(struct hvsi_struct *hp, char *buf, int count)
+{
+ unsigned long got;
+
+ got = hvc_get_chars(hp->vtermno, buf, count);
+
+ return got;
+}
+
+static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
+ struct tty_struct **to_hangup, struct hvsi_struct **to_handshake)
+{
+ struct hvsi_control *header = (struct hvsi_control *)packet;
+
+ switch (header->verb) {
+ case VSV_MODEM_CTL_UPDATE:
+ if ((header->word & HVSI_TSCD) == 0) {
+ /* CD went away; no more connection */
+ pr_debug("hvsi%i: CD dropped\n", hp->index);
+ hp->mctrl &= TIOCM_CD;
+ /* If userland hasn't done an open(2) yet, hp->tty is NULL. */
+ if (hp->tty && !(hp->tty->flags & CLOCAL))
+ *to_hangup = hp->tty;
+ }
+ break;
+ case VSV_CLOSE_PROTOCOL:
+ pr_debug("hvsi%i: service processor came back\n", hp->index);
+ if (hp->state != HVSI_CLOSED) {
+ *to_handshake = hp;
+ }
+ break;
+ default:
+ printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ",
+ hp->index);
+ dump_packet(packet);
+ break;
+ }
+}
+
+static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet)
+{
+ struct hvsi_query_response *resp = (struct hvsi_query_response *)packet;
+
+ switch (hp->state) {
+ case HVSI_WAIT_FOR_VER_RESPONSE:
+ __set_state(hp, HVSI_WAIT_FOR_VER_QUERY);
+ break;
+ case HVSI_WAIT_FOR_MCTRL_RESPONSE:
+ hp->mctrl = 0;
+ if (resp->u.mctrl_word & HVSI_TSDTR)
+ hp->mctrl |= TIOCM_DTR;
+ if (resp->u.mctrl_word & HVSI_TSCD)
+ hp->mctrl |= TIOCM_CD;
+ __set_state(hp, HVSI_OPEN);
+ break;
+ default:
+ printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index);
+ dump_packet(packet);
+ break;
+ }
+}
+
+/* respond to service processor's version query */
+static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno)
+{
+ struct hvsi_query_response packet __ALIGNED__;
+ int wrote;
+
+ packet.type = VS_QUERY_RESPONSE_PACKET_HEADER;
+ packet.len = sizeof(struct hvsi_query_response);
+ packet.seqno = atomic_inc_return(&hp->seqno);
+ packet.verb = VSV_SEND_VERSION_NUMBER;
+ packet.u.version = HVSI_VERSION;
+ packet.query_seqno = query_seqno+1;
+
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
+ dbg_dump_hex((uint8_t*)&packet, packet.len);
+
+ wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
+ if (wrote != packet.len) {
+ printk(KERN_ERR "hvsi%i: couldn't send query response!\n",
+ hp->index);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet)
+{
+ struct hvsi_query *query = (struct hvsi_query *)packet;
+
+ switch (hp->state) {
+ case HVSI_WAIT_FOR_VER_QUERY:
+ hvsi_version_respond(hp, query->seqno);
+ __set_state(hp, HVSI_OPEN);
+ break;
+ default:
+ printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index);
+ dump_packet(packet);
+ break;
+ }
+}
+
+static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
+{
+ int i;
+
+ for (i=0; i < len; i++) {
+ char c = buf[i];
+#ifdef CONFIG_MAGIC_SYSRQ
+ if (c == '\0') {
+ hp->sysrq = 1;
+ continue;
+ } else if (hp->sysrq) {
+ handle_sysrq(c);
+ hp->sysrq = 0;
+ continue;
+ }
+#endif /* CONFIG_MAGIC_SYSRQ */
+ tty_insert_flip_char(hp->tty, c, 0);
+ }
+}
+
+/*
+ * We could get 252 bytes of data at once here. But the tty layer only
+ * throttles us at TTY_THRESHOLD_THROTTLE (128) bytes, so we could overflow
+ * it. Accordingly we won't send more than 128 bytes at a time to the flip
+ * buffer, which will give the tty buffer a chance to throttle us. Should the
+ * value of TTY_THRESHOLD_THROTTLE change in n_tty.c, this code should be
+ * revisited.
+ */
+#define TTY_THRESHOLD_THROTTLE 128
+static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
+ const uint8_t *packet)
+{
+ const struct hvsi_header *header = (const struct hvsi_header *)packet;
+ const uint8_t *data = packet + sizeof(struct hvsi_header);
+ int datalen = header->len - sizeof(struct hvsi_header);
+ int overflow = datalen - TTY_THRESHOLD_THROTTLE;
+
+ pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data);
+
+ if (datalen == 0)
+ return NULL;
+
+ if (overflow > 0) {
+ pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
+ datalen = TTY_THRESHOLD_THROTTLE;
+ }
+
+ hvsi_insert_chars(hp, data, datalen);
+
+ if (overflow > 0) {
+ /*
+ * we still have more data to deliver, so we need to save off the
+ * overflow and send it later
+ */
+ pr_debug("%s: deferring overflow\n", __func__);
+ memcpy(hp->throttle_buf, data + TTY_THRESHOLD_THROTTLE, overflow);
+ hp->n_throttle = overflow;
+ }
+
+ return hp->tty;
+}
+
+/*
+ * Returns true/false indicating data successfully read from hypervisor.
+ * Used both to get packets for tty connections and to advance the state
+ * machine during console handshaking (in which case tty = NULL and we ignore
+ * incoming data).
+ */
+static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
+ struct tty_struct **hangup, struct hvsi_struct **handshake)
+{
+ uint8_t *packet = hp->inbuf;
+ int chunklen;
+
+ *flip = NULL;
+ *hangup = NULL;
+ *handshake = NULL;
+
+ chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
+ if (chunklen == 0) {
+ pr_debug("%s: 0-length read\n", __func__);
+ return 0;
+ }
+
+ pr_debug("%s: got %i bytes\n", __func__, chunklen);
+ dbg_dump_hex(hp->inbuf_end, chunklen);
+
+ hp->inbuf_end += chunklen;
+
+ /* handle all completed packets */
+ while ((packet < hp->inbuf_end) && got_packet(hp, packet)) {
+ struct hvsi_header *header = (struct hvsi_header *)packet;
+
+ if (!is_header(packet)) {
+ printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index);
+ /* skip bytes until we find a header or run out of data */
+ while ((packet < hp->inbuf_end) && (!is_header(packet)))
+ packet++;
+ continue;
+ }
+
+ pr_debug("%s: handling %i-byte packet\n", __func__,
+ len_packet(packet));
+ dbg_dump_packet(packet);
+
+ switch (header->type) {
+ case VS_DATA_PACKET_HEADER:
+ if (!is_open(hp))
+ break;
+ if (hp->tty == NULL)
+ break; /* no tty buffer to put data in */
+ *flip = hvsi_recv_data(hp, packet);
+ break;
+ case VS_CONTROL_PACKET_HEADER:
+ hvsi_recv_control(hp, packet, hangup, handshake);
+ break;
+ case VS_QUERY_RESPONSE_PACKET_HEADER:
+ hvsi_recv_response(hp, packet);
+ break;
+ case VS_QUERY_PACKET_HEADER:
+ hvsi_recv_query(hp, packet);
+ break;
+ default:
+ printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n",
+ hp->index, header->type);
+ dump_packet(packet);
+ break;
+ }
+
+ packet += len_packet(packet);
+
+ if (*hangup || *handshake) {
+ pr_debug("%s: hangup or handshake\n", __func__);
+ /*
+ * we need to send the hangup now before receiving any more data.
+ * If we get "data, hangup, data", we can't deliver the second
+ * data before the hangup.
+ */
+ break;
+ }
+ }
+
+ compact_inbuf(hp, packet);
+
+ return 1;
+}
+
+static void hvsi_send_overflow(struct hvsi_struct *hp)
+{
+ pr_debug("%s: delivering %i bytes overflow\n", __func__,
+ hp->n_throttle);
+
+ hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
+ hp->n_throttle = 0;
+}
+
+/*
+ * must get all pending data because we only get an irq on empty->non-empty
+ * transition
+ */
+static irqreturn_t hvsi_interrupt(int irq, void *arg)
+{
+ struct hvsi_struct *hp = (struct hvsi_struct *)arg;
+ struct tty_struct *flip;
+ struct tty_struct *hangup;
+ struct hvsi_struct *handshake;
+ unsigned long flags;
+ int again = 1;
+
+ pr_debug("%s\n", __func__);
+
+ while (again) {
+ spin_lock_irqsave(&hp->lock, flags);
+ again = hvsi_load_chunk(hp, &flip, &hangup, &handshake);
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ /*
+ * we have to call tty_flip_buffer_push() and tty_hangup() outside our
+ * spinlock. But we also have to keep going until we've read all the
+ * available data.
+ */
+
+ if (flip) {
+ /* there was data put in the tty flip buffer */
+ tty_flip_buffer_push(flip);
+ flip = NULL;
+ }
+
+ if (hangup) {
+ tty_hangup(hangup);
+ }
+
+ if (handshake) {
+ pr_debug("hvsi%i: attempting re-handshake\n", handshake->index);
+ schedule_work(&handshake->handshaker);
+ }
+ }
+
+ spin_lock_irqsave(&hp->lock, flags);
+ if (hp->tty && hp->n_throttle
+ && (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
+ /* we weren't hung up and we weren't throttled, so we can deliver the
+ * rest now */
+ flip = hp->tty;
+ hvsi_send_overflow(hp);
+ }
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (flip) {
+ tty_flip_buffer_push(flip);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* for boot console, before the irq handler is running */
+static int __init poll_for_state(struct hvsi_struct *hp, int state)
+{
+ unsigned long end_jiffies = jiffies + HVSI_TIMEOUT;
+
+ for (;;) {
+ hvsi_interrupt(hp->virq, (void *)hp); /* get pending data */
+
+ if (hp->state == state)
+ return 0;
+
+ mdelay(5);
+ if (time_after(jiffies, end_jiffies))
+ return -EIO;
+ }
+}
+
+/* wait for irq handler to change our state */
+static int wait_for_state(struct hvsi_struct *hp, int state)
+{
+ int ret = 0;
+
+ if (!wait_event_timeout(hp->stateq, (hp->state == state), HVSI_TIMEOUT))
+ ret = -EIO;
+
+ return ret;
+}
+
+static int hvsi_query(struct hvsi_struct *hp, uint16_t verb)
+{
+ struct hvsi_query packet __ALIGNED__;
+ int wrote;
+
+ packet.type = VS_QUERY_PACKET_HEADER;
+ packet.len = sizeof(struct hvsi_query);
+ packet.seqno = atomic_inc_return(&hp->seqno);
+ packet.verb = verb;
+
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
+ dbg_dump_hex((uint8_t*)&packet, packet.len);
+
+ wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
+ if (wrote != packet.len) {
+ printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index,
+ wrote);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int hvsi_get_mctrl(struct hvsi_struct *hp)
+{
+ int ret;
+
+ set_state(hp, HVSI_WAIT_FOR_MCTRL_RESPONSE);
+ hvsi_query(hp, VSV_SEND_MODEM_CTL_STATUS);
+
+ ret = hvsi_wait(hp, HVSI_OPEN);
+ if (ret < 0) {
+ printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index);
+ set_state(hp, HVSI_OPEN);
+ return ret;
+ }
+
+ pr_debug("%s: mctrl 0x%x\n", __func__, hp->mctrl);
+
+ return 0;
+}
+
+/* note that we can only set DTR */
+static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl)
+{
+ struct hvsi_control packet __ALIGNED__;
+ int wrote;
+
+ packet.type = VS_CONTROL_PACKET_HEADER,
+ packet.seqno = atomic_inc_return(&hp->seqno);
+ packet.len = sizeof(struct hvsi_control);
+ packet.verb = VSV_SET_MODEM_CTL;
+ packet.mask = HVSI_TSDTR;
+
+ if (mctrl & TIOCM_DTR)
+ packet.word = HVSI_TSDTR;
+
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
+ dbg_dump_hex((uint8_t*)&packet, packet.len);
+
+ wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
+ if (wrote != packet.len) {
+ printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void hvsi_drain_input(struct hvsi_struct *hp)
+{
+ uint8_t buf[HVSI_MAX_READ] __ALIGNED__;
+ unsigned long end_jiffies = jiffies + HVSI_TIMEOUT;
+
+ while (time_before(end_jiffies, jiffies))
+ if (0 == hvsi_read(hp, buf, HVSI_MAX_READ))
+ break;
+}
+
+static int hvsi_handshake(struct hvsi_struct *hp)
+{
+ int ret;
+
+ /*
+ * We could have a CLOSE or other data waiting for us before we even try
+ * to open; try to throw it all away so we don't get confused. (CLOSE
+ * is the first message sent up the pipe when the FSP comes online. We
+ * need to distinguish between "it came up a while ago and we're the first
+ * user" and "it was just reset before it saw our handshake packet".)
+ */
+ hvsi_drain_input(hp);
+
+ set_state(hp, HVSI_WAIT_FOR_VER_RESPONSE);
+ ret = hvsi_query(hp, VSV_SEND_VERSION_NUMBER);
+ if (ret < 0) {
+ printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index);
+ return ret;
+ }
+
+ ret = hvsi_wait(hp, HVSI_OPEN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void hvsi_handshaker(struct work_struct *work)
+{
+ struct hvsi_struct *hp =
+ container_of(work, struct hvsi_struct, handshaker);
+
+ if (hvsi_handshake(hp) >= 0)
+ return;
+
+ printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index);
+ if (is_console(hp)) {
+ /*
+ * ttys will re-attempt the handshake via hvsi_open, but
+ * the console will not.
+ */
+ printk(KERN_ERR "hvsi%i: lost console!\n", hp->index);
+ }
+}
+
+static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count)
+{
+ struct hvsi_data packet __ALIGNED__;
+ int ret;
+
+ BUG_ON(count > HVSI_MAX_OUTGOING_DATA);
+
+ packet.type = VS_DATA_PACKET_HEADER;
+ packet.seqno = atomic_inc_return(&hp->seqno);
+ packet.len = count + sizeof(struct hvsi_header);
+ memcpy(&packet.data, buf, count);
+
+ ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
+ if (ret == packet.len) {
+ /* return the number of chars written, not the packet length */
+ return count;
+ }
+ return ret; /* return any errors */
+}
+
+static void hvsi_close_protocol(struct hvsi_struct *hp)
+{
+ struct hvsi_control packet __ALIGNED__;
+
+ packet.type = VS_CONTROL_PACKET_HEADER;
+ packet.seqno = atomic_inc_return(&hp->seqno);
+ packet.len = 6;
+ packet.verb = VSV_CLOSE_PROTOCOL;
+
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
+ dbg_dump_hex((uint8_t*)&packet, packet.len);
+
+ hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
+}
+
+static int hvsi_open(struct tty_struct *tty, struct file *filp)
+{
+ struct hvsi_struct *hp;
+ unsigned long flags;
+ int line = tty->index;
+ int ret;
+
+ pr_debug("%s\n", __func__);
+
+ if (line < 0 || line >= hvsi_count)
+ return -ENODEV;
+ hp = &hvsi_ports[line];
+
+ tty->driver_data = hp;
+
+ mb();
+ if (hp->state == HVSI_FSP_DIED)
+ return -EIO;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ hp->tty = tty;
+ hp->count++;
+ atomic_set(&hp->seqno, 0);
+ h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (is_console(hp))
+ return 0; /* this has already been handshaked as the console */
+
+ ret = hvsi_handshake(hp);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name);
+ return ret;
+ }
+
+ ret = hvsi_get_mctrl(hp);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name);
+ return ret;
+ }
+
+ ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: couldn't set DTR\n", tty->name);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* wait for hvsi_write_worker to empty hp->outbuf */
+static void hvsi_flush_output(struct hvsi_struct *hp)
+{
+ wait_event_timeout(hp->emptyq, (hp->n_outbuf <= 0), HVSI_TIMEOUT);
+
+ /* 'writer' could still be pending if it didn't see n_outbuf = 0 yet */
+ cancel_delayed_work_sync(&hp->writer);
+ flush_work_sync(&hp->handshaker);
+
+ /*
+ * it's also possible that our timeout expired and hvsi_write_worker
+ * didn't manage to push outbuf. poof.
+ */
+ hp->n_outbuf = 0;
+}
+
+static void hvsi_close(struct tty_struct *tty, struct file *filp)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+ unsigned long flags;
+
+ pr_debug("%s\n", __func__);
+
+ if (tty_hung_up_p(filp))
+ return;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ if (--hp->count == 0) {
+ hp->tty = NULL;
+ hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */
+
+ /* only close down connection if it is not the console */
+ if (!is_console(hp)) {
+ h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); /* no more irqs */
+ __set_state(hp, HVSI_CLOSED);
+ /*
+ * any data delivered to the tty layer after this will be
+ * discarded (except for XON/XOFF)
+ */
+ tty->closing = 1;
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ /* let any existing irq handlers finish. no more will start. */
+ synchronize_irq(hp->virq);
+
+ /* hvsi_write_worker will re-schedule until outbuf is empty. */
+ hvsi_flush_output(hp);
+
+ /* tell FSP to stop sending data */
+ hvsi_close_protocol(hp);
+
+ /*
+ * drain anything FSP is still in the middle of sending, and let
+ * hvsi_handshake drain the rest on the next open.
+ */
+ hvsi_drain_input(hp);
+
+ spin_lock_irqsave(&hp->lock, flags);
+ }
+ } else if (hp->count < 0)
+ printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n",
+ hp - hvsi_ports, hp->count);
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
+
+static void hvsi_hangup(struct tty_struct *tty)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+ unsigned long flags;
+
+ pr_debug("%s\n", __func__);
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ hp->count = 0;
+ hp->n_outbuf = 0;
+ hp->tty = NULL;
+
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
+
+/* called with hp->lock held */
+static void hvsi_push(struct hvsi_struct *hp)
+{
+ int n;
+
+ if (hp->n_outbuf <= 0)
+ return;
+
+ n = hvsi_put_chars(hp, hp->outbuf, hp->n_outbuf);
+ if (n > 0) {
+ /* success */
+ pr_debug("%s: wrote %i chars\n", __func__, n);
+ hp->n_outbuf = 0;
+ } else if (n == -EIO) {
+ __set_state(hp, HVSI_FSP_DIED);
+ printk(KERN_ERR "hvsi%i: service processor died\n", hp->index);
+ }
+}
+
+/* hvsi_write_worker will keep rescheduling itself until outbuf is empty */
+static void hvsi_write_worker(struct work_struct *work)
+{
+ struct hvsi_struct *hp =
+ container_of(work, struct hvsi_struct, writer.work);
+ unsigned long flags;
+#ifdef DEBUG
+ static long start_j = 0;
+
+ if (start_j == 0)
+ start_j = jiffies;
+#endif /* DEBUG */
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf);
+
+ if (!is_open(hp)) {
+ /*
+ * We could have a non-open connection if the service processor died
+ * while we were busily scheduling ourselves. In that case, it could
+ * be minutes before the service processor comes back, so only try
+ * again once a second.
+ */
+ schedule_delayed_work(&hp->writer, HZ);
+ goto out;
+ }
+
+ hvsi_push(hp);
+ if (hp->n_outbuf > 0)
+ schedule_delayed_work(&hp->writer, 10);
+ else {
+#ifdef DEBUG
+ pr_debug("%s: outbuf emptied after %li jiffies\n", __func__,
+ jiffies - start_j);
+ start_j = 0;
+#endif /* DEBUG */
+ wake_up_all(&hp->emptyq);
+ tty_wakeup(hp->tty);
+ }
+
+out:
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
+
+static int hvsi_write_room(struct tty_struct *tty)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+
+ return N_OUTBUF - hp->n_outbuf;
+}
+
+static int hvsi_chars_in_buffer(struct tty_struct *tty)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+
+ return hp->n_outbuf;
+}
+
+static int hvsi_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+ const char *source = buf;
+ unsigned long flags;
+ int total = 0;
+ int origcount = count;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf);
+
+ if (!is_open(hp)) {
+ /* we're either closing or not yet open; don't accept data */
+ pr_debug("%s: not open\n", __func__);
+ goto out;
+ }
+
+ /*
+ * when the hypervisor buffer (16K) fills, data will stay in hp->outbuf
+ * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls
+ * will see there is no room in outbuf and return.
+ */
+ while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) {
+ int chunksize = min(count, hvsi_write_room(hp->tty));
+
+ BUG_ON(hp->n_outbuf < 0);
+ memcpy(hp->outbuf + hp->n_outbuf, source, chunksize);
+ hp->n_outbuf += chunksize;
+
+ total += chunksize;
+ source += chunksize;
+ count -= chunksize;
+ hvsi_push(hp);
+ }
+
+ if (hp->n_outbuf > 0) {
+ /*
+ * we weren't able to write it all to the hypervisor.
+ * schedule another push attempt.
+ */
+ schedule_delayed_work(&hp->writer, 10);
+ }
+
+out:
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (total != origcount)
+ pr_debug("%s: wanted %i, only wrote %i\n", __func__, origcount,
+ total);
+
+ return total;
+}
+
+/*
+ * I have never seen throttle or unthrottle called, so this little throttle
+ * buffering scheme may or may not work.
+ */
+static void hvsi_throttle(struct tty_struct *tty)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+
+ pr_debug("%s\n", __func__);
+
+ h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE);
+}
+
+static void hvsi_unthrottle(struct tty_struct *tty)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+ unsigned long flags;
+ int shouldflip = 0;
+
+ pr_debug("%s\n", __func__);
+
+ spin_lock_irqsave(&hp->lock, flags);
+ if (hp->n_throttle) {
+ hvsi_send_overflow(hp);
+ shouldflip = 1;
+ }
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ if (shouldflip)
+ tty_flip_buffer_push(hp->tty);
+
+ h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
+}
+
+static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+
+ hvsi_get_mctrl(hp);
+ return hp->mctrl;
+}
+
+static int hvsi_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct hvsi_struct *hp = tty->driver_data;
+ unsigned long flags;
+ uint16_t new_mctrl;
+
+ /* we can only alter DTR */
+ clear &= TIOCM_DTR;
+ set &= TIOCM_DTR;
+
+ spin_lock_irqsave(&hp->lock, flags);
+
+ new_mctrl = (hp->mctrl & ~clear) | set;
+
+ if (hp->mctrl != new_mctrl) {
+ hvsi_set_mctrl(hp, new_mctrl);
+ hp->mctrl = new_mctrl;
+ }
+ spin_unlock_irqrestore(&hp->lock, flags);
+
+ return 0;
+}
+
+
+static const struct tty_operations hvsi_ops = {
+ .open = hvsi_open,
+ .close = hvsi_close,
+ .write = hvsi_write,
+ .hangup = hvsi_hangup,
+ .write_room = hvsi_write_room,
+ .chars_in_buffer = hvsi_chars_in_buffer,
+ .throttle = hvsi_throttle,
+ .unthrottle = hvsi_unthrottle,
+ .tiocmget = hvsi_tiocmget,
+ .tiocmset = hvsi_tiocmset,
+};
+
+static int __init hvsi_init(void)
+{
+ int i;
+
+ hvsi_driver = alloc_tty_driver(hvsi_count);
+ if (!hvsi_driver)
+ return -ENOMEM;
+
+ hvsi_driver->owner = THIS_MODULE;
+ hvsi_driver->driver_name = "hvsi";
+ hvsi_driver->name = "hvsi";
+ hvsi_driver->major = HVSI_MAJOR;
+ hvsi_driver->minor_start = HVSI_MINOR;
+ hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+ hvsi_driver->init_termios = tty_std_termios;
+ hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+ hvsi_driver->init_termios.c_ispeed = 9600;
+ hvsi_driver->init_termios.c_ospeed = 9600;
+ hvsi_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(hvsi_driver, &hvsi_ops);
+
+ for (i=0; i < hvsi_count; i++) {
+ struct hvsi_struct *hp = &hvsi_ports[i];
+ int ret = 1;
+
+ ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp);
+ if (ret)
+ printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
+ hp->virq, ret);
+ }
+ hvsi_wait = wait_for_state; /* irqs active now */
+
+ if (tty_register_driver(hvsi_driver))
+ panic("Couldn't register hvsi console driver\n");
+
+ printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
+
+ return 0;
+}
+device_initcall(hvsi_init);
+
+/***** console (not tty) code: *****/
+
+static void hvsi_console_print(struct console *console, const char *buf,
+ unsigned int count)
+{
+ struct hvsi_struct *hp = &hvsi_ports[console->index];
+ char c[HVSI_MAX_OUTGOING_DATA] __ALIGNED__;
+ unsigned int i = 0, n = 0;
+ int ret, donecr = 0;
+
+ mb();
+ if (!is_open(hp))
+ return;
+
+ /*
+ * ugh, we have to translate LF -> CRLF ourselves, in place.
+ * copied from hvc_console.c:
+ */
+ while (count > 0 || i > 0) {
+ if (count > 0 && i < sizeof(c)) {
+ if (buf[n] == '\n' && !donecr) {
+ c[i++] = '\r';
+ donecr = 1;
+ } else {
+ c[i++] = buf[n++];
+ donecr = 0;
+ --count;
+ }
+ } else {
+ ret = hvsi_put_chars(hp, c, i);
+ if (ret < 0)
+ i = 0;
+ i -= ret;
+ }
+ }
+}
+
+static struct tty_driver *hvsi_console_device(struct console *console,
+ int *index)
+{
+ *index = console->index;
+ return hvsi_driver;
+}
+
+static int __init hvsi_console_setup(struct console *console, char *options)
+{
+ struct hvsi_struct *hp;
+ int ret;
+
+ if (console->index < 0 || console->index >= hvsi_count)
+ return -1;
+ hp = &hvsi_ports[console->index];
+
+ /* give the FSP a chance to change the baud rate when we re-open */
+ hvsi_close_protocol(hp);
+
+ ret = hvsi_handshake(hp);
+ if (ret < 0)
+ return ret;
+
+ ret = hvsi_get_mctrl(hp);
+ if (ret < 0)
+ return ret;
+
+ ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR);
+ if (ret < 0)
+ return ret;
+
+ hp->flags |= HVSI_CONSOLE;
+
+ return 0;
+}
+
+static struct console hvsi_console = {
+ .name = "hvsi",
+ .write = hvsi_console_print,
+ .device = hvsi_console_device,
+ .setup = hvsi_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int __init hvsi_console_init(void)
+{
+ struct device_node *vty;
+
+ hvsi_wait = poll_for_state; /* no irqs yet; must poll */
+
+ /* search device tree for vty nodes */
+ for (vty = of_find_compatible_node(NULL, "serial", "hvterm-protocol");
+ vty != NULL;
+ vty = of_find_compatible_node(vty, "serial", "hvterm-protocol")) {
+ struct hvsi_struct *hp;
+ const uint32_t *vtermno, *irq;
+
+ vtermno = of_get_property(vty, "reg", NULL);
+ irq = of_get_property(vty, "interrupts", NULL);
+ if (!vtermno || !irq)
+ continue;
+
+ if (hvsi_count >= MAX_NR_HVSI_CONSOLES) {
+ of_node_put(vty);
+ break;
+ }
+
+ hp = &hvsi_ports[hvsi_count];
+ INIT_DELAYED_WORK(&hp->writer, hvsi_write_worker);
+ INIT_WORK(&hp->handshaker, hvsi_handshaker);
+ init_waitqueue_head(&hp->emptyq);
+ init_waitqueue_head(&hp->stateq);
+ spin_lock_init(&hp->lock);
+ hp->index = hvsi_count;
+ hp->inbuf_end = hp->inbuf;
+ hp->state = HVSI_CLOSED;
+ hp->vtermno = *vtermno;
+ hp->virq = irq_create_mapping(NULL, irq[0]);
+ if (hp->virq == NO_IRQ) {
+ printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
+ __func__, irq[0]);
+ continue;
+ }
+
+ hvsi_count++;
+ }
+
+ if (hvsi_count)
+ register_console(&hvsi_console);
+ return 0;
+}
+console_initcall(hvsi_console_init);
diff --git a/drivers/tty/hvc/virtio_console.c b/drivers/tty/hvc/virtio_console.c
new file mode 100644
index 000000000000..896a2ced1d27
--- /dev/null
+++ b/drivers/tty/hvc/virtio_console.c
@@ -0,0 +1,1838 @@
+/*
+ * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation
+ * Copyright (C) 2009, 2010 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/cdev.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_console.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include "hvc_console.h"
+
+/*
+ * This is a global struct for storing common data for all the devices
+ * this driver handles.
+ *
+ * Mainly, it has a linked list for all the consoles in one place so
+ * that callbacks from hvc for get_chars(), put_chars() work properly
+ * across multiple devices and multiple ports per device.
+ */
+struct ports_driver_data {
+ /* Used for registering chardevs */
+ struct class *class;
+
+ /* Used for exporting per-port information to debugfs */
+ struct dentry *debugfs_dir;
+
+ /* List of all the devices we're handling */
+ struct list_head portdevs;
+
+ /* Number of devices this driver is handling */
+ unsigned int index;
+
+ /*
+ * This is used to keep track of the number of hvc consoles
+ * spawned by this driver. This number is given as the first
+ * argument to hvc_alloc(). To correctly map an initial
+ * console spawned via hvc_instantiate to the console being
+ * hooked up via hvc_alloc, we need to pass the same vtermno.
+ *
+ * We also just assume the first console being initialised was
+ * the first one that got used as the initial console.
+ */
+ unsigned int next_vtermno;
+
+ /* All the console devices handled by this driver */
+ struct list_head consoles;
+};
+static struct ports_driver_data pdrvdata;
+
+DEFINE_SPINLOCK(pdrvdata_lock);
+
+/* This struct holds information that's relevant only for console ports */
+struct console {
+ /* We'll place all consoles in a list in the pdrvdata struct */
+ struct list_head list;
+
+ /* The hvc device associated with this console port */
+ struct hvc_struct *hvc;
+
+ /* The size of the console */
+ struct winsize ws;
+
+ /*
+ * This number identifies the number that we used to register
+ * with hvc in hvc_instantiate() and hvc_alloc(); this is the
+ * number passed on by the hvc callbacks to us to
+ * differentiate between the other console ports handled by
+ * this driver
+ */
+ u32 vtermno;
+};
+
+struct port_buffer {
+ char *buf;
+
+ /* size of the buffer in *buf above */
+ size_t size;
+
+ /* used length of the buffer */
+ size_t len;
+ /* offset in the buf from which to consume data */
+ size_t offset;
+};
+
+/*
+ * This is a per-device struct that stores data common to all the
+ * ports for that device (vdev->priv).
+ */
+struct ports_device {
+ /* Next portdev in the list, head is in the pdrvdata struct */
+ struct list_head list;
+
+ /*
+ * Workqueue handlers where we process deferred work after
+ * notification
+ */
+ struct work_struct control_work;
+
+ struct list_head ports;
+
+ /* To protect the list of ports */
+ spinlock_t ports_lock;
+
+ /* To protect the vq operations for the control channel */
+ spinlock_t cvq_lock;
+
+ /* The current config space is stored here */
+ struct virtio_console_config config;
+
+ /* The virtio device we're associated with */
+ struct virtio_device *vdev;
+
+ /*
+ * A couple of virtqueues for the control channel: one for
+ * guest->host transfers, one for host->guest transfers
+ */
+ struct virtqueue *c_ivq, *c_ovq;
+
+ /* Array of per-port IO virtqueues */
+ struct virtqueue **in_vqs, **out_vqs;
+
+ /* Used for numbering devices for sysfs and debugfs */
+ unsigned int drv_index;
+
+ /* Major number for this device. Ports will be created as minors. */
+ int chr_major;
+};
+
+/* This struct holds the per-port data */
+struct port {
+ /* Next port in the list, head is in the ports_device */
+ struct list_head list;
+
+ /* Pointer to the parent virtio_console device */
+ struct ports_device *portdev;
+
+ /* The current buffer from which data has to be fed to readers */
+ struct port_buffer *inbuf;
+
+ /*
+ * To protect the operations on the in_vq associated with this
+ * port. Has to be a spinlock because it can be called from
+ * interrupt context (get_char()).
+ */
+ spinlock_t inbuf_lock;
+
+ /* Protect the operations on the out_vq. */
+ spinlock_t outvq_lock;
+
+ /* The IO vqs for this port */
+ struct virtqueue *in_vq, *out_vq;
+
+ /* File in the debugfs directory that exposes this port's information */
+ struct dentry *debugfs_file;
+
+ /*
+ * The entries in this struct will be valid if this port is
+ * hooked up to an hvc console
+ */
+ struct console cons;
+
+ /* Each port associates with a separate char device */
+ struct cdev *cdev;
+ struct device *dev;
+
+ /* Reference-counting to handle port hot-unplugs and file operations */
+ struct kref kref;
+
+ /* A waitqueue for poll() or blocking read operations */
+ wait_queue_head_t waitqueue;
+
+ /* The 'name' of the port that we expose via sysfs properties */
+ char *name;
+
+ /* We can notify apps of host connect / disconnect events via SIGIO */
+ struct fasync_struct *async_queue;
+
+ /* The 'id' to identify the port with the Host */
+ u32 id;
+
+ bool outvq_full;
+
+ /* Is the host device open */
+ bool host_connected;
+
+ /* We should allow only one process to open a port */
+ bool guest_connected;
+};
+
+/* This is the very early arch-specified put chars function. */
+static int (*early_put_chars)(u32, const char *, int);
+
+static struct port *find_port_by_vtermno(u32 vtermno)
+{
+ struct port *port;
+ struct console *cons;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdrvdata_lock, flags);
+ list_for_each_entry(cons, &pdrvdata.consoles, list) {
+ if (cons->vtermno == vtermno) {
+ port = container_of(cons, struct port, cons);
+ goto out;
+ }
+ }
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&pdrvdata_lock, flags);
+ return port;
+}
+
+static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev,
+ dev_t dev)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->cdev->dev == dev)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+
+ return port;
+}
+
+static struct port *find_port_by_devt(dev_t dev)
+{
+ struct ports_device *portdev;
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdrvdata_lock, flags);
+ list_for_each_entry(portdev, &pdrvdata.portdevs, list) {
+ port = find_port_by_devt_in_portdev(portdev, dev);
+ if (port)
+ goto out;
+ }
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&pdrvdata_lock, flags);
+ return port;
+}
+
+static struct port *find_port_by_id(struct ports_device *portdev, u32 id)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->id == id)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+
+ return port;
+}
+
+static struct port *find_port_by_vq(struct ports_device *portdev,
+ struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->in_vq == vq || port->out_vq == vq)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+ return port;
+}
+
+static bool is_console_port(struct port *port)
+{
+ if (port->cons.hvc)
+ return true;
+ return false;
+}
+
+static inline bool use_multiport(struct ports_device *portdev)
+{
+ /*
+ * This condition can be true when put_chars is called from
+ * early_init
+ */
+ if (!portdev->vdev)
+ return 0;
+ return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT);
+}
+
+static void free_buf(struct port_buffer *buf)
+{
+ kfree(buf->buf);
+ kfree(buf);
+}
+
+static struct port_buffer *alloc_buf(size_t buf_size)
+{
+ struct port_buffer *buf;
+
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ goto fail;
+ buf->buf = kzalloc(buf_size, GFP_KERNEL);
+ if (!buf->buf)
+ goto free_buf;
+ buf->len = 0;
+ buf->offset = 0;
+ buf->size = buf_size;
+ return buf;
+
+free_buf:
+ kfree(buf);
+fail:
+ return NULL;
+}
+
+/* Callers should take appropriate locks */
+static void *get_inbuf(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
+ unsigned int len;
+
+ vq = port->in_vq;
+ buf = virtqueue_get_buf(vq, &len);
+ if (buf) {
+ buf->len = len;
+ buf->offset = 0;
+ }
+ return buf;
+}
+
+/*
+ * Create a scatter-gather list representing our input buffer and put
+ * it in the queue.
+ *
+ * Callers should take appropriate locks.
+ */
+static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
+{
+ struct scatterlist sg[1];
+ int ret;
+
+ sg_init_one(sg, buf->buf, buf->size);
+
+ ret = virtqueue_add_buf(vq, sg, 0, 1, buf);
+ virtqueue_kick(vq);
+ return ret;
+}
+
+/* Discard any unread data this port has. Callers lockers. */
+static void discard_port_data(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
+ unsigned int len;
+ int ret;
+
+ vq = port->in_vq;
+ if (port->inbuf)
+ buf = port->inbuf;
+ else
+ buf = virtqueue_get_buf(vq, &len);
+
+ ret = 0;
+ while (buf) {
+ if (add_inbuf(vq, buf) < 0) {
+ ret++;
+ free_buf(buf);
+ }
+ buf = virtqueue_get_buf(vq, &len);
+ }
+ port->inbuf = NULL;
+ if (ret)
+ dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
+ ret);
+}
+
+static bool port_has_data(struct port *port)
+{
+ unsigned long flags;
+ bool ret;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ port->inbuf = get_inbuf(port);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ ret = false;
+out:
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ return ret;
+}
+
+static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
+ unsigned int event, unsigned int value)
+{
+ struct scatterlist sg[1];
+ struct virtio_console_control cpkt;
+ struct virtqueue *vq;
+ unsigned int len;
+
+ if (!use_multiport(portdev))
+ return 0;
+
+ cpkt.id = port_id;
+ cpkt.event = event;
+ cpkt.value = value;
+
+ vq = portdev->c_ovq;
+
+ sg_init_one(sg, &cpkt, sizeof(cpkt));
+ if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+ virtqueue_kick(vq);
+ while (!virtqueue_get_buf(vq, &len))
+ cpu_relax();
+ }
+ return 0;
+}
+
+static ssize_t send_control_msg(struct port *port, unsigned int event,
+ unsigned int value)
+{
+ /* Did the port get unplugged before userspace closed it? */
+ if (port->portdev)
+ return __send_control_msg(port->portdev, port->id, event, value);
+ return 0;
+}
+
+/* Callers must take the port->outvq_lock */
+static void reclaim_consumed_buffers(struct port *port)
+{
+ void *buf;
+ unsigned int len;
+
+ while ((buf = virtqueue_get_buf(port->out_vq, &len))) {
+ kfree(buf);
+ port->outvq_full = false;
+ }
+}
+
+static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count,
+ bool nonblock)
+{
+ struct scatterlist sg[1];
+ struct virtqueue *out_vq;
+ ssize_t ret;
+ unsigned long flags;
+ unsigned int len;
+
+ out_vq = port->out_vq;
+
+ spin_lock_irqsave(&port->outvq_lock, flags);
+
+ reclaim_consumed_buffers(port);
+
+ sg_init_one(sg, in_buf, in_count);
+ ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf);
+
+ /* Tell Host to go! */
+ virtqueue_kick(out_vq);
+
+ if (ret < 0) {
+ in_count = 0;
+ goto done;
+ }
+
+ if (ret == 0)
+ port->outvq_full = true;
+
+ if (nonblock)
+ goto done;
+
+ /*
+ * Wait till the host acknowledges it pushed out the data we
+ * sent. This is done for data from the hvc_console; the tty
+ * operations are performed with spinlocks held so we can't
+ * sleep here. An alternative would be to copy the data to a
+ * buffer and relax the spinning requirement. The downside is
+ * we need to kmalloc a GFP_ATOMIC buffer each time the
+ * console driver writes something out.
+ */
+ while (!virtqueue_get_buf(out_vq, &len))
+ cpu_relax();
+done:
+ spin_unlock_irqrestore(&port->outvq_lock, flags);
+ /*
+ * We're expected to return the amount of data we wrote -- all
+ * of it
+ */
+ return in_count;
+}
+
+/*
+ * Give out the data that's requested from the buffer that we have
+ * queued up.
+ */
+static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count,
+ bool to_user)
+{
+ struct port_buffer *buf;
+ unsigned long flags;
+
+ if (!out_count || !port_has_data(port))
+ return 0;
+
+ buf = port->inbuf;
+ out_count = min(out_count, buf->len - buf->offset);
+
+ if (to_user) {
+ ssize_t ret;
+
+ ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count);
+ if (ret)
+ return -EFAULT;
+ } else {
+ memcpy(out_buf, buf->buf + buf->offset, out_count);
+ }
+
+ buf->offset += out_count;
+
+ if (buf->offset == buf->len) {
+ /*
+ * We're done using all the data in this buffer.
+ * Re-queue so that the Host can send us more data.
+ */
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ port->inbuf = NULL;
+
+ if (add_inbuf(port->in_vq, buf) < 0)
+ dev_warn(port->dev, "failed add_buf\n");
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ }
+ /* Return the number of bytes actually copied */
+ return out_count;
+}
+
+/* The condition that must be true for polling to end */
+static bool will_read_block(struct port *port)
+{
+ if (!port->guest_connected) {
+ /* Port got hot-unplugged. Let's exit. */
+ return false;
+ }
+ return !port_has_data(port) && port->host_connected;
+}
+
+static bool will_write_block(struct port *port)
+{
+ bool ret;
+
+ if (!port->guest_connected) {
+ /* Port got hot-unplugged. Let's exit. */
+ return false;
+ }
+ if (!port->host_connected)
+ return true;
+
+ spin_lock_irq(&port->outvq_lock);
+ /*
+ * Check if the Host has consumed any buffers since we last
+ * sent data (this is only applicable for nonblocking ports).
+ */
+ reclaim_consumed_buffers(port);
+ ret = port->outvq_full;
+ spin_unlock_irq(&port->outvq_lock);
+
+ return ret;
+}
+
+static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ ssize_t ret;
+
+ port = filp->private_data;
+
+ if (!port_has_data(port)) {
+ /*
+ * If nothing's connected on the host just return 0 in
+ * case of list_empty; this tells the userspace app
+ * that there's no connection
+ */
+ if (!port->host_connected)
+ return 0;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(port->waitqueue,
+ !will_read_block(port));
+ if (ret < 0)
+ return ret;
+ }
+ /* Port got hot-unplugged. */
+ if (!port->guest_connected)
+ return -ENODEV;
+ /*
+ * We could've received a disconnection message while we were
+ * waiting for more data.
+ *
+ * This check is not clubbed in the if() statement above as we
+ * might receive some data as well as the host could get
+ * disconnected after we got woken up from our wait. So we
+ * really want to give off whatever data we have and only then
+ * check for host_connected.
+ */
+ if (!port_has_data(port) && !port->host_connected)
+ return 0;
+
+ return fill_readbuf(port, ubuf, count, true);
+}
+
+static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret;
+ bool nonblock;
+
+ /* Userspace could be out to fool us */
+ if (!count)
+ return 0;
+
+ port = filp->private_data;
+
+ nonblock = filp->f_flags & O_NONBLOCK;
+
+ if (will_write_block(port)) {
+ if (nonblock)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(port->waitqueue,
+ !will_write_block(port));
+ if (ret < 0)
+ return ret;
+ }
+ /* Port got hot-unplugged. */
+ if (!port->guest_connected)
+ return -ENODEV;
+
+ count = min((size_t)(32 * 1024), count);
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = copy_from_user(buf, ubuf, count);
+ if (ret) {
+ ret = -EFAULT;
+ goto free_buf;
+ }
+
+ /*
+ * We now ask send_buf() to not spin for generic ports -- we
+ * can re-use the same code path that non-blocking file
+ * descriptors take for blocking file descriptors since the
+ * wait is already done and we're certain the write will go
+ * through to the host.
+ */
+ nonblock = true;
+ ret = send_buf(port, buf, count, nonblock);
+
+ if (nonblock && ret > 0)
+ goto out;
+
+free_buf:
+ kfree(buf);
+out:
+ return ret;
+}
+
+static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
+{
+ struct port *port;
+ unsigned int ret;
+
+ port = filp->private_data;
+ poll_wait(filp, &port->waitqueue, wait);
+
+ if (!port->guest_connected) {
+ /* Port got unplugged */
+ return POLLHUP;
+ }
+ ret = 0;
+ if (!will_read_block(port))
+ ret |= POLLIN | POLLRDNORM;
+ if (!will_write_block(port))
+ ret |= POLLOUT;
+ if (!port->host_connected)
+ ret |= POLLHUP;
+
+ return ret;
+}
+
+static void remove_port(struct kref *kref);
+
+static int port_fops_release(struct inode *inode, struct file *filp)
+{
+ struct port *port;
+
+ port = filp->private_data;
+
+ /* Notify host of port being closed */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+ spin_lock_irq(&port->inbuf_lock);
+ port->guest_connected = false;
+
+ discard_port_data(port);
+
+ spin_unlock_irq(&port->inbuf_lock);
+
+ spin_lock_irq(&port->outvq_lock);
+ reclaim_consumed_buffers(port);
+ spin_unlock_irq(&port->outvq_lock);
+
+ /*
+ * Locks aren't necessary here as a port can't be opened after
+ * unplug, and if a port isn't unplugged, a kref would already
+ * exist for the port. Plus, taking ports_lock here would
+ * create a dependency on other locks taken by functions
+ * inside remove_port if we're the last holder of the port,
+ * creating many problems.
+ */
+ kref_put(&port->kref, remove_port);
+
+ return 0;
+}
+
+static int port_fops_open(struct inode *inode, struct file *filp)
+{
+ struct cdev *cdev = inode->i_cdev;
+ struct port *port;
+ int ret;
+
+ port = find_port_by_devt(cdev->dev);
+ filp->private_data = port;
+
+ /* Prevent against a port getting hot-unplugged at the same time */
+ spin_lock_irq(&port->portdev->ports_lock);
+ kref_get(&port->kref);
+ spin_unlock_irq(&port->portdev->ports_lock);
+
+ /*
+ * Don't allow opening of console port devices -- that's done
+ * via /dev/hvc
+ */
+ if (is_console_port(port)) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ /* Allow only one process to open a particular port at a time */
+ spin_lock_irq(&port->inbuf_lock);
+ if (port->guest_connected) {
+ spin_unlock_irq(&port->inbuf_lock);
+ ret = -EMFILE;
+ goto out;
+ }
+
+ port->guest_connected = true;
+ spin_unlock_irq(&port->inbuf_lock);
+
+ spin_lock_irq(&port->outvq_lock);
+ /*
+ * There might be a chance that we missed reclaiming a few
+ * buffers in the window of the port getting previously closed
+ * and opening now.
+ */
+ reclaim_consumed_buffers(port);
+ spin_unlock_irq(&port->outvq_lock);
+
+ nonseekable_open(inode, filp);
+
+ /* Notify host of port being opened */
+ send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+ return 0;
+out:
+ kref_put(&port->kref, remove_port);
+ return ret;
+}
+
+static int port_fops_fasync(int fd, struct file *filp, int mode)
+{
+ struct port *port;
+
+ port = filp->private_data;
+ return fasync_helper(fd, filp, mode, &port->async_queue);
+}
+
+/*
+ * The file operations that we support: programs in the guest can open
+ * a console device, read from it, write to it, poll for data and
+ * close it. The devices are at
+ * /dev/vport<device number>p<port number>
+ */
+static const struct file_operations port_fops = {
+ .owner = THIS_MODULE,
+ .open = port_fops_open,
+ .read = port_fops_read,
+ .write = port_fops_write,
+ .poll = port_fops_poll,
+ .release = port_fops_release,
+ .fasync = port_fops_fasync,
+ .llseek = no_llseek,
+};
+
+/*
+ * The put_chars() callback is pretty straightforward.
+ *
+ * We turn the characters into a scatter-gather list, add it to the
+ * output queue and then kick the Host. Then we sit here waiting for
+ * it to finish: inefficient in theory, but in practice
+ * implementations will do it immediately (lguest's Launcher does).
+ */
+static int put_chars(u32 vtermno, const char *buf, int count)
+{
+ struct port *port;
+
+ if (unlikely(early_put_chars))
+ return early_put_chars(vtermno, buf, count);
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return -EPIPE;
+
+ return send_buf(port, (void *)buf, count, false);
+}
+
+/*
+ * get_chars() is the callback from the hvc_console infrastructure
+ * when an interrupt is received.
+ *
+ * We call out to fill_readbuf that gets us the required data from the
+ * buffers that are queued up.
+ */
+static int get_chars(u32 vtermno, char *buf, int count)
+{
+ struct port *port;
+
+ /* If we've not set up the port yet, we have no input to give. */
+ if (unlikely(early_put_chars))
+ return 0;
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return -EPIPE;
+
+ /* If we don't have an input queue yet, we can't get input. */
+ BUG_ON(!port->in_vq);
+
+ return fill_readbuf(port, buf, count, false);
+}
+
+static void resize_console(struct port *port)
+{
+ struct virtio_device *vdev;
+
+ /* The port could have been hot-unplugged */
+ if (!port || !is_console_port(port))
+ return;
+
+ vdev = port->portdev->vdev;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE))
+ hvc_resize(port->cons.hvc, port->cons.ws);
+}
+
+/* We set the configuration at this point, since we now have a tty */
+static int notifier_add_vio(struct hvc_struct *hp, int data)
+{
+ struct port *port;
+
+ port = find_port_by_vtermno(hp->vtermno);
+ if (!port)
+ return -EINVAL;
+
+ hp->irq_requested = 1;
+ resize_console(port);
+
+ return 0;
+}
+
+static void notifier_del_vio(struct hvc_struct *hp, int data)
+{
+ hp->irq_requested = 0;
+}
+
+/* The operations for console ports. */
+static const struct hv_ops hv_ops = {
+ .get_chars = get_chars,
+ .put_chars = put_chars,
+ .notifier_add = notifier_add_vio,
+ .notifier_del = notifier_del_vio,
+ .notifier_hangup = notifier_del_vio,
+};
+
+/*
+ * Console drivers are initialized very early so boot messages can go
+ * out, so we do things slightly differently from the generic virtio
+ * initialization of the net and block drivers.
+ *
+ * At this stage, the console is output-only. It's too early to set
+ * up a virtqueue, so we let the drivers do some boutique early-output
+ * thing.
+ */
+int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
+{
+ early_put_chars = put_chars;
+ return hvc_instantiate(0, 0, &hv_ops);
+}
+
+int init_port_console(struct port *port)
+{
+ int ret;
+
+ /*
+ * The Host's telling us this port is a console port. Hook it
+ * up with an hvc console.
+ *
+ * To set up and manage our virtual console, we call
+ * hvc_alloc().
+ *
+ * The first argument of hvc_alloc() is the virtual console
+ * number. The second argument is the parameter for the
+ * notification mechanism (like irq number). We currently
+ * leave this as zero, virtqueues have implicit notifications.
+ *
+ * The third argument is a "struct hv_ops" containing the
+ * put_chars() get_chars(), notifier_add() and notifier_del()
+ * pointers. The final argument is the output buffer size: we
+ * can do any size, so we put PAGE_SIZE here.
+ */
+ port->cons.vtermno = pdrvdata.next_vtermno;
+
+ port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE);
+ if (IS_ERR(port->cons.hvc)) {
+ ret = PTR_ERR(port->cons.hvc);
+ dev_err(port->dev,
+ "error %d allocating hvc for port\n", ret);
+ port->cons.hvc = NULL;
+ return ret;
+ }
+ spin_lock_irq(&pdrvdata_lock);
+ pdrvdata.next_vtermno++;
+ list_add_tail(&port->cons.list, &pdrvdata.consoles);
+ spin_unlock_irq(&pdrvdata_lock);
+ port->guest_connected = true;
+
+ /*
+ * Start using the new console output if this is the first
+ * console to come up.
+ */
+ if (early_put_chars)
+ early_put_chars = NULL;
+
+ /* Notify host of port being opened */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+ return 0;
+}
+
+static ssize_t show_port_name(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ struct port *port;
+
+ port = dev_get_drvdata(dev);
+
+ return sprintf(buffer, "%s\n", port->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL);
+
+static struct attribute *port_sysfs_entries[] = {
+ &dev_attr_name.attr,
+ NULL
+};
+
+static struct attribute_group port_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = port_sysfs_entries,
+};
+
+static int debugfs_open(struct inode *inode, struct file *filp)
+{
+ filp->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t debugfs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret, out_offset, out_count;
+
+ out_count = 1024;
+ buf = kmalloc(out_count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ port = filp->private_data;
+ out_offset = 0;
+ out_offset += snprintf(buf + out_offset, out_count,
+ "name: %s\n", port->name ? port->name : "");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "guest_connected: %d\n", port->guest_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "host_connected: %d\n", port->host_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "outvq_full: %d\n", port->outvq_full);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "is_console: %s\n",
+ is_console_port(port) ? "yes" : "no");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "console_vtermno: %u\n", port->cons.vtermno);
+
+ ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_debugfs_ops = {
+ .owner = THIS_MODULE,
+ .open = debugfs_open,
+ .read = debugfs_read,
+};
+
+static void set_console_size(struct port *port, u16 rows, u16 cols)
+{
+ if (!port || !is_console_port(port))
+ return;
+
+ port->cons.ws.ws_row = rows;
+ port->cons.ws.ws_col = cols;
+}
+
+static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
+{
+ struct port_buffer *buf;
+ unsigned int nr_added_bufs;
+ int ret;
+
+ nr_added_bufs = 0;
+ do {
+ buf = alloc_buf(PAGE_SIZE);
+ if (!buf)
+ break;
+
+ spin_lock_irq(lock);
+ ret = add_inbuf(vq, buf);
+ if (ret < 0) {
+ spin_unlock_irq(lock);
+ free_buf(buf);
+ break;
+ }
+ nr_added_bufs++;
+ spin_unlock_irq(lock);
+ } while (ret > 0);
+
+ return nr_added_bufs;
+}
+
+static void send_sigio_to_port(struct port *port)
+{
+ if (port->async_queue && port->guest_connected)
+ kill_fasync(&port->async_queue, SIGIO, POLL_OUT);
+}
+
+static int add_port(struct ports_device *portdev, u32 id)
+{
+ char debugfs_name[16];
+ struct port *port;
+ struct port_buffer *buf;
+ dev_t devt;
+ unsigned int nr_added_bufs;
+ int err;
+
+ port = kmalloc(sizeof(*port), GFP_KERNEL);
+ if (!port) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ kref_init(&port->kref);
+
+ port->portdev = portdev;
+ port->id = id;
+
+ port->name = NULL;
+ port->inbuf = NULL;
+ port->cons.hvc = NULL;
+ port->async_queue = NULL;
+
+ port->cons.ws.ws_row = port->cons.ws.ws_col = 0;
+
+ port->host_connected = port->guest_connected = false;
+
+ port->outvq_full = false;
+
+ port->in_vq = portdev->in_vqs[port->id];
+ port->out_vq = portdev->out_vqs[port->id];
+
+ port->cdev = cdev_alloc();
+ if (!port->cdev) {
+ dev_err(&port->portdev->vdev->dev, "Error allocating cdev\n");
+ err = -ENOMEM;
+ goto free_port;
+ }
+ port->cdev->ops = &port_fops;
+
+ devt = MKDEV(portdev->chr_major, id);
+ err = cdev_add(port->cdev, devt, 1);
+ if (err < 0) {
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d adding cdev for port %u\n", err, id);
+ goto free_cdev;
+ }
+ port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev,
+ devt, port, "vport%up%u",
+ port->portdev->drv_index, id);
+ if (IS_ERR(port->dev)) {
+ err = PTR_ERR(port->dev);
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d creating device for port %u\n",
+ err, id);
+ goto free_cdev;
+ }
+
+ spin_lock_init(&port->inbuf_lock);
+ spin_lock_init(&port->outvq_lock);
+ init_waitqueue_head(&port->waitqueue);
+
+ /* Fill the in_vq with buffers so the host can send us data. */
+ nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock);
+ if (!nr_added_bufs) {
+ dev_err(port->dev, "Error allocating inbufs\n");
+ err = -ENOMEM;
+ goto free_device;
+ }
+
+ /*
+ * If we're not using multiport support, this has to be a console port
+ */
+ if (!use_multiport(port->portdev)) {
+ err = init_port_console(port);
+ if (err)
+ goto free_inbufs;
+ }
+
+ spin_lock_irq(&portdev->ports_lock);
+ list_add_tail(&port->list, &port->portdev->ports);
+ spin_unlock_irq(&portdev->ports_lock);
+
+ /*
+ * Tell the Host we're set so that it can send us various
+ * configuration parameters for this port (eg, port name,
+ * caching, whether this is a console port, etc.)
+ */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+
+ if (pdrvdata.debugfs_dir) {
+ /*
+ * Finally, create the debugfs file that we can use to
+ * inspect a port's state at any time
+ */
+ sprintf(debugfs_name, "vport%up%u",
+ port->portdev->drv_index, id);
+ port->debugfs_file = debugfs_create_file(debugfs_name, 0444,
+ pdrvdata.debugfs_dir,
+ port,
+ &port_debugfs_ops);
+ }
+ return 0;
+
+free_inbufs:
+ while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+free_device:
+ device_destroy(pdrvdata.class, port->dev->devt);
+free_cdev:
+ cdev_del(port->cdev);
+free_port:
+ kfree(port);
+fail:
+ /* The host might want to notify management sw about port add failure */
+ __send_control_msg(portdev, id, VIRTIO_CONSOLE_PORT_READY, 0);
+ return err;
+}
+
+/* No users remain, remove all port-specific data. */
+static void remove_port(struct kref *kref)
+{
+ struct port *port;
+
+ port = container_of(kref, struct port, kref);
+
+ sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+ device_destroy(pdrvdata.class, port->dev->devt);
+ cdev_del(port->cdev);
+
+ kfree(port->name);
+
+ debugfs_remove(port->debugfs_file);
+
+ kfree(port);
+}
+
+/*
+ * Port got unplugged. Remove port from portdev's list and drop the
+ * kref reference. If no userspace has this port opened, it will
+ * result in immediate removal the port.
+ */
+static void unplug_port(struct port *port)
+{
+ struct port_buffer *buf;
+
+ spin_lock_irq(&port->portdev->ports_lock);
+ list_del(&port->list);
+ spin_unlock_irq(&port->portdev->ports_lock);
+
+ if (port->guest_connected) {
+ port->guest_connected = false;
+ port->host_connected = false;
+ wake_up_interruptible(&port->waitqueue);
+
+ /* Let the app know the port is going down. */
+ send_sigio_to_port(port);
+ }
+
+ if (is_console_port(port)) {
+ spin_lock_irq(&pdrvdata_lock);
+ list_del(&port->cons.list);
+ spin_unlock_irq(&pdrvdata_lock);
+#if 0
+ /*
+ * hvc_remove() not called as removing one hvc port
+ * results in other hvc ports getting frozen.
+ *
+ * Once this is resolved in hvc, this functionality
+ * will be enabled. Till that is done, the -EPIPE
+ * return from get_chars() above will help
+ * hvc_console.c to clean up on ports we remove here.
+ */
+ hvc_remove(port->cons.hvc);
+#endif
+ }
+
+ /* Remove unused data this port might have received. */
+ discard_port_data(port);
+
+ reclaim_consumed_buffers(port);
+
+ /* Remove buffers we queued up for the Host to send us data in. */
+ while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+
+ /*
+ * We should just assume the device itself has gone off --
+ * else a close on an open port later will try to send out a
+ * control message.
+ */
+ port->portdev = NULL;
+
+ /*
+ * Locks around here are not necessary - a port can't be
+ * opened after we removed the port struct from ports_list
+ * above.
+ */
+ kref_put(&port->kref, remove_port);
+}
+
+/* Any private messages that the Host and Guest want to share */
+static void handle_control_message(struct ports_device *portdev,
+ struct port_buffer *buf)
+{
+ struct virtio_console_control *cpkt;
+ struct port *port;
+ size_t name_size;
+ int err;
+
+ cpkt = (struct virtio_console_control *)(buf->buf + buf->offset);
+
+ port = find_port_by_id(portdev, cpkt->id);
+ if (!port && cpkt->event != VIRTIO_CONSOLE_PORT_ADD) {
+ /* No valid header at start of buffer. Drop it. */
+ dev_dbg(&portdev->vdev->dev,
+ "Invalid index %u in control packet\n", cpkt->id);
+ return;
+ }
+
+ switch (cpkt->event) {
+ case VIRTIO_CONSOLE_PORT_ADD:
+ if (port) {
+ dev_dbg(&portdev->vdev->dev,
+ "Port %u already added\n", port->id);
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+ break;
+ }
+ if (cpkt->id >= portdev->config.max_nr_ports) {
+ dev_warn(&portdev->vdev->dev,
+ "Request for adding port with out-of-bound id %u, max. supported id: %u\n",
+ cpkt->id, portdev->config.max_nr_ports - 1);
+ break;
+ }
+ add_port(portdev, cpkt->id);
+ break;
+ case VIRTIO_CONSOLE_PORT_REMOVE:
+ unplug_port(port);
+ break;
+ case VIRTIO_CONSOLE_CONSOLE_PORT:
+ if (!cpkt->value)
+ break;
+ if (is_console_port(port))
+ break;
+
+ init_port_console(port);
+ /*
+ * Could remove the port here in case init fails - but
+ * have to notify the host first.
+ */
+ break;
+ case VIRTIO_CONSOLE_RESIZE: {
+ struct {
+ __u16 rows;
+ __u16 cols;
+ } size;
+
+ if (!is_console_port(port))
+ break;
+
+ memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt),
+ sizeof(size));
+ set_console_size(port, size.rows, size.cols);
+
+ port->cons.hvc->irq_requested = 1;
+ resize_console(port);
+ break;
+ }
+ case VIRTIO_CONSOLE_PORT_OPEN:
+ port->host_connected = cpkt->value;
+ wake_up_interruptible(&port->waitqueue);
+ /*
+ * If the host port got closed and the host had any
+ * unconsumed buffers, we'll be able to reclaim them
+ * now.
+ */
+ spin_lock_irq(&port->outvq_lock);
+ reclaim_consumed_buffers(port);
+ spin_unlock_irq(&port->outvq_lock);
+
+ /*
+ * If the guest is connected, it'll be interested in
+ * knowing the host connection state changed.
+ */
+ send_sigio_to_port(port);
+ break;
+ case VIRTIO_CONSOLE_PORT_NAME:
+ /*
+ * Skip the size of the header and the cpkt to get the size
+ * of the name that was sent
+ */
+ name_size = buf->len - buf->offset - sizeof(*cpkt) + 1;
+
+ port->name = kmalloc(name_size, GFP_KERNEL);
+ if (!port->name) {
+ dev_err(port->dev,
+ "Not enough space to store port name\n");
+ break;
+ }
+ strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
+ name_size - 1);
+ port->name[name_size - 1] = 0;
+
+ /*
+ * Since we only have one sysfs attribute, 'name',
+ * create it only if we have a name for the port.
+ */
+ err = sysfs_create_group(&port->dev->kobj,
+ &port_attribute_group);
+ if (err) {
+ dev_err(port->dev,
+ "Error %d creating sysfs device attributes\n",
+ err);
+ } else {
+ /*
+ * Generate a udev event so that appropriate
+ * symlinks can be created based on udev
+ * rules.
+ */
+ kobject_uevent(&port->dev->kobj, KOBJ_CHANGE);
+ }
+ break;
+ }
+}
+
+static void control_work_handler(struct work_struct *work)
+{
+ struct ports_device *portdev;
+ struct virtqueue *vq;
+ struct port_buffer *buf;
+ unsigned int len;
+
+ portdev = container_of(work, struct ports_device, control_work);
+ vq = portdev->c_ivq;
+
+ spin_lock(&portdev->cvq_lock);
+ while ((buf = virtqueue_get_buf(vq, &len))) {
+ spin_unlock(&portdev->cvq_lock);
+
+ buf->len = len;
+ buf->offset = 0;
+
+ handle_control_message(portdev, buf);
+
+ spin_lock(&portdev->cvq_lock);
+ if (add_inbuf(portdev->c_ivq, buf) < 0) {
+ dev_warn(&portdev->vdev->dev,
+ "Error adding buffer to queue\n");
+ free_buf(buf);
+ }
+ }
+ spin_unlock(&portdev->cvq_lock);
+}
+
+static void in_intr(struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ port = find_port_by_vq(vq->vdev->priv, vq);
+ if (!port)
+ return;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (!port->inbuf)
+ port->inbuf = get_inbuf(port);
+
+ /*
+ * Don't queue up data when port is closed. This condition
+ * can be reached when a console port is not yet connected (no
+ * tty is spawned) and the host sends out data to console
+ * ports. For generic serial ports, the host won't
+ * (shouldn't) send data till the guest is connected.
+ */
+ if (!port->guest_connected)
+ discard_port_data(port);
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+
+ wake_up_interruptible(&port->waitqueue);
+
+ /* Send a SIGIO indicating new data in case the process asked for it */
+ send_sigio_to_port(port);
+
+ if (is_console_port(port) && hvc_poll(port->cons.hvc))
+ hvc_kick();
+}
+
+static void control_intr(struct virtqueue *vq)
+{
+ struct ports_device *portdev;
+
+ portdev = vq->vdev->priv;
+ schedule_work(&portdev->control_work);
+}
+
+static void config_intr(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+
+ portdev = vdev->priv;
+
+ if (!use_multiport(portdev)) {
+ struct port *port;
+ u16 rows, cols;
+
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, cols),
+ &cols, sizeof(u16));
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, rows),
+ &rows, sizeof(u16));
+
+ port = find_port_by_id(portdev, 0);
+ set_console_size(port, rows, cols);
+
+ /*
+ * We'll use this way of resizing only for legacy
+ * support. For newer userspace
+ * (VIRTIO_CONSOLE_F_MULTPORT+), use control messages
+ * to indicate console size changes so that it can be
+ * done per-port.
+ */
+ resize_console(port);
+ }
+}
+
+static int init_vqs(struct ports_device *portdev)
+{
+ vq_callback_t **io_callbacks;
+ char **io_names;
+ struct virtqueue **vqs;
+ u32 i, j, nr_ports, nr_queues;
+ int err;
+
+ nr_ports = portdev->config.max_nr_ports;
+ nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
+
+ vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
+ io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
+ io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
+ portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
+ !portdev->out_vqs) {
+ err = -ENOMEM;
+ goto free;
+ }
+
+ /*
+ * For backward compat (newer host but older guest), the host
+ * spawns a console port first and also inits the vqs for port
+ * 0 before others.
+ */
+ j = 0;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ j += 2;
+
+ if (use_multiport(portdev)) {
+ io_callbacks[j] = control_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "control-i";
+ io_names[j + 1] = "control-o";
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ }
+ }
+ /* Find the queues. */
+ err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs,
+ io_callbacks,
+ (const char **)io_names);
+ if (err)
+ goto free;
+
+ j = 0;
+ portdev->in_vqs[0] = vqs[0];
+ portdev->out_vqs[0] = vqs[1];
+ j += 2;
+ if (use_multiport(portdev)) {
+ portdev->c_ivq = vqs[j];
+ portdev->c_ovq = vqs[j + 1];
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ portdev->in_vqs[i] = vqs[j];
+ portdev->out_vqs[i] = vqs[j + 1];
+ }
+ }
+ kfree(io_names);
+ kfree(io_callbacks);
+ kfree(vqs);
+
+ return 0;
+
+free:
+ kfree(portdev->out_vqs);
+ kfree(portdev->in_vqs);
+ kfree(io_names);
+ kfree(io_callbacks);
+ kfree(vqs);
+
+ return err;
+}
+
+static const struct file_operations portdev_fops = {
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Once we're further in boot, we get probed like any other virtio
+ * device.
+ *
+ * If the host also supports multiple console ports, we check the
+ * config space to see how many ports the host has spawned. We
+ * initialize each port found.
+ */
+static int __devinit virtcons_probe(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ int err;
+ bool multiport;
+
+ portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
+ if (!portdev) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* Attach this portdev to this virtio_device, and vice-versa. */
+ portdev->vdev = vdev;
+ vdev->priv = portdev;
+
+ spin_lock_irq(&pdrvdata_lock);
+ portdev->drv_index = pdrvdata.index++;
+ spin_unlock_irq(&pdrvdata_lock);
+
+ portdev->chr_major = register_chrdev(0, "virtio-portsdev",
+ &portdev_fops);
+ if (portdev->chr_major < 0) {
+ dev_err(&vdev->dev,
+ "Error %d registering chrdev for device %u\n",
+ portdev->chr_major, portdev->drv_index);
+ err = portdev->chr_major;
+ goto free;
+ }
+
+ multiport = false;
+ portdev->config.max_nr_ports = 1;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+ multiport = true;
+ vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT;
+
+ vdev->config->get(vdev, offsetof(struct virtio_console_config,
+ max_nr_ports),
+ &portdev->config.max_nr_ports,
+ sizeof(portdev->config.max_nr_ports));
+ }
+
+ /* Let the Host know we support multiple ports.*/
+ vdev->config->finalize_features(vdev);
+
+ err = init_vqs(portdev);
+ if (err < 0) {
+ dev_err(&vdev->dev, "Error %d initializing vqs\n", err);
+ goto free_chrdev;
+ }
+
+ spin_lock_init(&portdev->ports_lock);
+ INIT_LIST_HEAD(&portdev->ports);
+
+ if (multiport) {
+ unsigned int nr_added_bufs;
+
+ spin_lock_init(&portdev->cvq_lock);
+ INIT_WORK(&portdev->control_work, &control_work_handler);
+
+ nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ if (!nr_added_bufs) {
+ dev_err(&vdev->dev,
+ "Error allocating buffers for control queue\n");
+ err = -ENOMEM;
+ goto free_vqs;
+ }
+ } else {
+ /*
+ * For backward compatibility: Create a console port
+ * if we're running on older host.
+ */
+ add_port(portdev, 0);
+ }
+
+ spin_lock_irq(&pdrvdata_lock);
+ list_add_tail(&portdev->list, &pdrvdata.portdevs);
+ spin_unlock_irq(&pdrvdata_lock);
+
+ __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
+ VIRTIO_CONSOLE_DEVICE_READY, 1);
+ return 0;
+
+free_vqs:
+ /* The host might want to notify mgmt sw about device add failure */
+ __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
+ VIRTIO_CONSOLE_DEVICE_READY, 0);
+ vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+free_chrdev:
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
+free:
+ kfree(portdev);
+fail:
+ return err;
+}
+
+static void virtcons_remove(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ struct port *port, *port2;
+
+ portdev = vdev->priv;
+
+ spin_lock_irq(&pdrvdata_lock);
+ list_del(&portdev->list);
+ spin_unlock_irq(&pdrvdata_lock);
+
+ /* Disable interrupts for vqs */
+ vdev->config->reset(vdev);
+ /* Finish up work that's lined up */
+ cancel_work_sync(&portdev->control_work);
+
+ list_for_each_entry_safe(port, port2, &portdev->ports, list)
+ unplug_port(port);
+
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
+
+ /*
+ * When yanking out a device, we immediately lose the
+ * (device-side) queues. So there's no point in keeping the
+ * guest side around till we drop our final reference. This
+ * also means that any ports which are in an open state will
+ * have to just stop using the port, as the vqs are going
+ * away.
+ */
+ if (use_multiport(portdev)) {
+ struct port_buffer *buf;
+ unsigned int len;
+
+ while ((buf = virtqueue_get_buf(portdev->c_ivq, &len)))
+ free_buf(buf);
+
+ while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq)))
+ free_buf(buf);
+ }
+
+ vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+
+ kfree(portdev);
+}
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static unsigned int features[] = {
+ VIRTIO_CONSOLE_F_SIZE,
+ VIRTIO_CONSOLE_F_MULTIPORT,
+};
+
+static struct virtio_driver virtio_console = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtcons_probe,
+ .remove = virtcons_remove,
+ .config_changed = config_intr,
+};
+
+static int __init init(void)
+{
+ int err;
+
+ pdrvdata.class = class_create(THIS_MODULE, "virtio-ports");
+ if (IS_ERR(pdrvdata.class)) {
+ err = PTR_ERR(pdrvdata.class);
+ pr_err("Error %d creating virtio-ports class\n", err);
+ return err;
+ }
+
+ pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL);
+ if (!pdrvdata.debugfs_dir) {
+ pr_warning("Error %ld creating debugfs dir for virtio-ports\n",
+ PTR_ERR(pdrvdata.debugfs_dir));
+ }
+ INIT_LIST_HEAD(&pdrvdata.consoles);
+ INIT_LIST_HEAD(&pdrvdata.portdevs);
+
+ return register_virtio_driver(&virtio_console);
+}
+
+static void __exit fini(void)
+{
+ unregister_virtio_driver(&virtio_console);
+
+ class_destroy(pdrvdata.class);
+ if (pdrvdata.debugfs_dir)
+ debugfs_remove_recursive(pdrvdata.debugfs_dir);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio console driver");
+MODULE_LICENSE("GPL");