diff options
Diffstat (limited to 'drivers/scsi/hpsa_cmd.h')
| -rw-r--r-- | drivers/scsi/hpsa_cmd.h | 270 |
1 files changed, 261 insertions, 9 deletions
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index bfc8c4ea66f8..b5cc7052339f 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -1,6 +1,6 @@ /* * Disk Array driver for HP Smart Array SAS controllers - * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,6 +25,7 @@ #define SENSEINFOBYTES 32 /* may vary between hbas */ #define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ #define HPSA_SG_CHAIN 0x80000000 +#define HPSA_SG_LAST 0x40000000 #define MAXREPLYQS 256 /* Command Status value */ @@ -41,6 +42,8 @@ #define CMD_UNSOLICITED_ABORT 0x000A #define CMD_TIMEOUT 0x000B #define CMD_UNABORTABLE 0x000C +#define CMD_IOACCEL_DISABLED 0x000E + /* Unit Attentions ASC's as defined for the MSA2012sa */ #define POWER_OR_RESET 0x29 @@ -79,8 +82,9 @@ #define ATTR_ACA 0x07 /* cdb type */ -#define TYPE_CMD 0x00 -#define TYPE_MSG 0x01 +#define TYPE_CMD 0x00 +#define TYPE_MSG 0x01 +#define TYPE_IOACCEL2_CMD 0x81 /* 0x81 is not used by hardware */ /* Message Types */ #define HPSA_TASK_MANAGEMENT 0x00 @@ -125,9 +129,12 @@ #define CFGTBL_AccCmds 0x00000001l #define DOORBELL_CTLR_RESET 0x00000004l #define DOORBELL_CTLR_RESET2 0x00000020l +#define DOORBELL_CLEAR_EVENTS 0x00000040l #define CFGTBL_Trans_Simple 0x00000002l #define CFGTBL_Trans_Performant 0x00000004l +#define CFGTBL_Trans_io_accel1 0x00000080l +#define CFGTBL_Trans_io_accel2 0x00000100l #define CFGTBL_Trans_use_short_tags 0x20000000l #define CFGTBL_Trans_enable_directed_msix (1 << 30) @@ -135,6 +142,28 @@ #define CFGTBL_BusType_Ultra3 0x00000002l #define CFGTBL_BusType_Fibre1G 0x00000100l #define CFGTBL_BusType_Fibre2G 0x00000200l + +/* VPD Inquiry types */ +#define HPSA_VPD_SUPPORTED_PAGES 0x00 +#define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1 +#define HPSA_VPD_LV_IOACCEL_STATUS 0xC2 +#define HPSA_VPD_LV_STATUS 0xC3 +#define HPSA_VPD_HEADER_SZ 4 + +/* Logical volume states */ +#define HPSA_VPD_LV_STATUS_UNSUPPORTED -1 +#define HPSA_LV_OK 0x0 +#define HPSA_LV_UNDERGOING_ERASE 0x0F +#define HPSA_LV_UNDERGOING_RPI 0x12 +#define HPSA_LV_PENDING_RPI 0x13 +#define HPSA_LV_ENCRYPTED_NO_KEY 0x14 +#define HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER 0x15 +#define HPSA_LV_UNDERGOING_ENCRYPTION 0x16 +#define HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING 0x17 +#define HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER 0x18 +#define HPSA_LV_PENDING_ENCRYPTION 0x19 +#define HPSA_LV_PENDING_ENCRYPTION_REKEYING 0x1A + struct vals32 { u32 lower; u32 upper; @@ -162,9 +191,50 @@ struct InquiryData { #define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ #define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ +#define HPSA_REPORT_PHYS_EXTENDED 0x02 +#define HPSA_CISS_READ 0xc0 /* CISS Read */ +#define HPSA_GET_RAID_MAP 0xc8 /* CISS Get RAID Layout Map */ + +#define RAID_MAP_MAX_ENTRIES 256 + +struct raid_map_disk_data { + u32 ioaccel_handle; /**< Handle to access this disk via the + * I/O accelerator */ + u8 xor_mult[2]; /**< XOR multipliers for this position, + * valid for data disks only */ + u8 reserved[2]; +}; + +struct raid_map_data { + u32 structure_size; /* Size of entire structure in bytes */ + u32 volume_blk_size; /* bytes / block in the volume */ + u64 volume_blk_cnt; /* logical blocks on the volume */ + u8 phys_blk_shift; /* Shift factor to convert between + * units of logical blocks and physical + * disk blocks */ + u8 parity_rotation_shift; /* Shift factor to convert between units + * of logical stripes and physical + * stripes */ + u16 strip_size; /* blocks used on each disk / stripe */ + u64 disk_starting_blk; /* First disk block used in volume */ + u64 disk_blk_cnt; /* disk blocks used by volume / disk */ + u16 data_disks_per_row; /* data disk entries / row in the map */ + u16 metadata_disks_per_row; /* mirror/parity disk entries / row + * in the map */ + u16 row_cnt; /* rows in each layout map */ + u16 layout_map_count; /* layout maps (1 map per mirror/parity + * group) */ + u16 flags; /* Bit 0 set if encryption enabled */ +#define RAID_MAP_FLAG_ENCRYPT_ON 0x01 + u16 dekindex; /* Data encryption key index. */ + u8 reserved[16]; + struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES]; +}; + struct ReportLUNdata { u8 LUNListLength[4]; - u32 reserved; + u8 extended_response_flag; + u8 reserved[3]; u8 LUN[HPSA_MAX_LUN][8]; }; @@ -187,6 +257,7 @@ struct SenseSubsystem_info { #define BMIC_CACHE_FLUSH 0xc2 #define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ #define BMIC_FLASH_FIRMWARE 0xF7 +#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64 /* Command List Structure */ union SCSI3Addr { @@ -283,6 +354,8 @@ struct ErrorInfo { /* Command types */ #define CMD_IOCTL_PEND 0x01 #define CMD_SCSI 0x03 +#define CMD_IOACCEL1 0x04 +#define CMD_IOACCEL2 0x05 #define DIRECT_LOOKUP_SHIFT 5 #define DIRECT_LOOKUP_BIT 0x10 @@ -314,7 +387,6 @@ struct CommandList { int cmd_type; long cmdindex; struct list_head list; - struct request *rq; struct completion *waiting; void *scsi_cmd; @@ -327,16 +399,183 @@ struct CommandList { */ #define IS_32_BIT ((8 - sizeof(long))/4) #define IS_64_BIT (!IS_32_BIT) -#define PAD_32 (4) -#define PAD_64 (4) +#define PAD_32 (40) +#define PAD_64 (12) #define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64) u8 pad[COMMANDLIST_PAD]; }; +/* Max S/G elements in I/O accelerator command */ +#define IOACCEL1_MAXSGENTRIES 24 +#define IOACCEL2_MAXSGENTRIES 28 + +/* + * Structure for I/O accelerator (mode 1) commands. + * Note that this structure must be 128-byte aligned in size. + */ +struct io_accel1_cmd { + u16 dev_handle; /* 0x00 - 0x01 */ + u8 reserved1; /* 0x02 */ + u8 function; /* 0x03 */ + u8 reserved2[8]; /* 0x04 - 0x0B */ + u32 err_info; /* 0x0C - 0x0F */ + u8 reserved3[2]; /* 0x10 - 0x11 */ + u8 err_info_len; /* 0x12 */ + u8 reserved4; /* 0x13 */ + u8 sgl_offset; /* 0x14 */ + u8 reserved5[7]; /* 0x15 - 0x1B */ + u32 transfer_len; /* 0x1C - 0x1F */ + u8 reserved6[4]; /* 0x20 - 0x23 */ + u16 io_flags; /* 0x24 - 0x25 */ + u8 reserved7[14]; /* 0x26 - 0x33 */ + u8 LUN[8]; /* 0x34 - 0x3B */ + u32 control; /* 0x3C - 0x3F */ + u8 CDB[16]; /* 0x40 - 0x4F */ + u8 reserved8[16]; /* 0x50 - 0x5F */ + u16 host_context_flags; /* 0x60 - 0x61 */ + u16 timeout_sec; /* 0x62 - 0x63 */ + u8 ReplyQueue; /* 0x64 */ + u8 reserved9[3]; /* 0x65 - 0x67 */ + struct vals32 Tag; /* 0x68 - 0x6F */ + struct vals32 host_addr; /* 0x70 - 0x77 */ + u8 CISS_LUN[8]; /* 0x78 - 0x7F */ + struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; +#define IOACCEL1_PAD_64 0 +#define IOACCEL1_PAD_32 0 +#define IOACCEL1_PAD (IS_32_BIT * IOACCEL1_PAD_32 + \ + IS_64_BIT * IOACCEL1_PAD_64) + u8 pad[IOACCEL1_PAD]; +}; + +#define IOACCEL1_FUNCTION_SCSIIO 0x00 +#define IOACCEL1_SGLOFFSET 32 + +#define IOACCEL1_IOFLAGS_IO_REQ 0x4000 +#define IOACCEL1_IOFLAGS_CDBLEN_MASK 0x001F +#define IOACCEL1_IOFLAGS_CDBLEN_MAX 16 + +#define IOACCEL1_CONTROL_NODATAXFER 0x00000000 +#define IOACCEL1_CONTROL_DATA_OUT 0x01000000 +#define IOACCEL1_CONTROL_DATA_IN 0x02000000 +#define IOACCEL1_CONTROL_TASKPRIO_MASK 0x00007800 +#define IOACCEL1_CONTROL_TASKPRIO_SHIFT 11 +#define IOACCEL1_CONTROL_SIMPLEQUEUE 0x00000000 +#define IOACCEL1_CONTROL_HEADOFQUEUE 0x00000100 +#define IOACCEL1_CONTROL_ORDEREDQUEUE 0x00000200 +#define IOACCEL1_CONTROL_ACA 0x00000400 + +#define IOACCEL1_HCFLAGS_CISS_FORMAT 0x0013 + +#define IOACCEL1_BUSADDR_CMDTYPE 0x00000060 + +struct ioaccel2_sg_element { + u64 address; + u32 length; + u8 reserved[3]; + u8 chain_indicator; +#define IOACCEL2_CHAIN 0x80 +}; + +/* + * SCSI Response Format structure for IO Accelerator Mode 2 + */ +struct io_accel2_scsi_response { + u8 IU_type; +#define IOACCEL2_IU_TYPE_SRF 0x60 + u8 reserved1[3]; + u8 req_id[4]; /* request identifier */ + u8 reserved2[4]; + u8 serv_response; /* service response */ +#define IOACCEL2_SERV_RESPONSE_COMPLETE 0x000 +#define IOACCEL2_SERV_RESPONSE_FAILURE 0x001 +#define IOACCEL2_SERV_RESPONSE_TMF_COMPLETE 0x002 +#define IOACCEL2_SERV_RESPONSE_TMF_SUCCESS 0x003 +#define IOACCEL2_SERV_RESPONSE_TMF_REJECTED 0x004 +#define IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN 0x005 + u8 status; /* status */ +#define IOACCEL2_STATUS_SR_TASK_COMP_GOOD 0x00 +#define IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND 0x02 +#define IOACCEL2_STATUS_SR_TASK_COMP_BUSY 0x08 +#define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON 0x18 +#define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28 +#define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40 +#define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E + u8 data_present; /* low 2 bits */ +#define IOACCEL2_NO_DATAPRESENT 0x000 +#define IOACCEL2_RESPONSE_DATAPRESENT 0x001 +#define IOACCEL2_SENSE_DATA_PRESENT 0x002 +#define IOACCEL2_RESERVED 0x003 + u8 sense_data_len; /* sense/response data length */ + u8 resid_cnt[4]; /* residual count */ + u8 sense_data_buff[32]; /* sense/response data buffer */ +}; + +#define IOACCEL2_64_PAD 76 +#define IOACCEL2_32_PAD 76 +#define IOACCEL2_PAD (IS_32_BIT * IOACCEL2_32_PAD + \ + IS_64_BIT * IOACCEL2_64_PAD) +/* + * Structure for I/O accelerator (mode 2 or m2) commands. + * Note that this structure must be 128-byte aligned in size. + */ +struct io_accel2_cmd { + u8 IU_type; /* IU Type */ + u8 direction; /* direction, memtype, and encryption */ +#define IOACCEL2_DIRECTION_MASK 0x03 /* bits 0,1: direction */ +#define IOACCEL2_DIRECTION_MEMTYPE_MASK 0x04 /* bit 2: memtype source/dest */ + /* 0b=PCIe, 1b=DDR */ +#define IOACCEL2_DIRECTION_ENCRYPT_MASK 0x08 /* bit 3: encryption flag */ + /* 0=off, 1=on */ + u8 reply_queue; /* Reply Queue ID */ + u8 reserved1; /* Reserved */ + u32 scsi_nexus; /* Device Handle */ + u32 Tag; /* cciss tag, lower 4 bytes only */ + u32 tweak_lower; /* Encryption tweak, lower 4 bytes */ + u8 cdb[16]; /* SCSI Command Descriptor Block */ + u8 cciss_lun[8]; /* 8 byte SCSI address */ + u32 data_len; /* Total bytes to transfer */ + u8 cmd_priority_task_attr; /* priority and task attrs */ +#define IOACCEL2_PRIORITY_MASK 0x78 +#define IOACCEL2_ATTR_MASK 0x07 + u8 sg_count; /* Number of sg elements */ + u16 dekindex; /* Data encryption key index */ + u64 err_ptr; /* Error Pointer */ + u32 err_len; /* Error Length*/ + u32 tweak_upper; /* Encryption tweak, upper 4 bytes */ + struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; + struct io_accel2_scsi_response error_data; + u8 pad[IOACCEL2_PAD]; +}; + +/* + * defines for Mode 2 command struct + * FIXME: this can't be all I need mfm + */ +#define IOACCEL2_IU_TYPE 0x40 +#define IOACCEL2_IU_TMF_TYPE 0x41 +#define IOACCEL2_DIR_NO_DATA 0x00 +#define IOACCEL2_DIR_DATA_IN 0x01 +#define IOACCEL2_DIR_DATA_OUT 0x02 +/* + * SCSI Task Management Request format for Accelerator Mode 2 + */ +struct hpsa_tmf_struct { + u8 iu_type; /* Information Unit Type */ + u8 reply_queue; /* Reply Queue ID */ + u8 tmf; /* Task Management Function */ + u8 reserved1; /* byte 3 Reserved */ + u32 it_nexus; /* SCSI I-T Nexus */ + u8 lun_id[8]; /* LUN ID for TMF request */ + struct vals32 Tag; /* cciss tag associated w/ request */ + struct vals32 abort_tag;/* cciss tag of SCSI cmd or task to abort */ + u64 error_ptr; /* Error Pointer */ + u32 error_len; /* Error Length */ +}; + /* Configuration Table Structure */ struct HostWrite { u32 TransportRequest; - u32 Reserved; + u32 command_pool_addr_hi; u32 CoalIntDelay; u32 CoalIntCount; }; @@ -344,6 +583,9 @@ struct HostWrite { #define SIMPLE_MODE 0x02 #define PERFORMANT_MODE 0x04 #define MEMQ_MODE 0x08 +#define IOACCEL_MODE_1 0x80 + +#define DRIVER_SUPPORT_UA_ENABLE 0x00000001 struct CfgTable { u8 Signature[4]; @@ -373,8 +615,18 @@ struct CfgTable { u32 misc_fw_support; /* offset 0x78 */ #define MISC_FW_DOORBELL_RESET (0x02) #define MISC_FW_DOORBELL_RESET2 (0x010) +#define MISC_FW_RAID_OFFLOAD_BASIC (0x020) +#define MISC_FW_EVENT_NOTIFY (0x080) u8 driver_version[32]; - + u32 max_cached_write_size; + u8 driver_scratchpad[16]; + u32 max_error_info_length; + u32 io_accel_max_embedded_sg_count; + u32 io_accel_request_size_offset; + u32 event_notify; +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) + u32 clear_event_notify; }; #define NUM_BLOCKFETCH_ENTRIES 8 |