summaryrefslogtreecommitdiff
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/reset/Kconfig15
-rw-r--r--drivers/power/reset/Makefile2
-rw-r--r--drivers/power/reset/keystone-reset.c166
-rw-r--r--drivers/power/reset/sun6i-reboot.c85
4 files changed, 268 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 49b46e6ca959..bdcf5173e377 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -51,6 +51,13 @@ config POWER_RESET_RESTART
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
+config POWER_RESET_SUN6I
+ bool "Allwinner A31 SoC reset driver"
+ depends on ARCH_SUNXI
+ depends on POWER_RESET
+ help
+ Reboot support for the Allwinner A31 SoCs.
+
config POWER_RESET_VEXPRESS
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
@@ -65,3 +72,11 @@ config POWER_RESET_XGENE
depends on POWER_RESET
help
Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+ bool "Keystone reset driver"
+ depends on ARCH_KEYSTONE
+ select MFD_SYSCON
+ help
+ Reboot support for the KEYSTONE SoCs.
+
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 16c0516e5a19..dde2e8bbac53 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -4,5 +4,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
+obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c
new file mode 100644
index 000000000000..408a18fd91cb
--- /dev/null
+++ b/drivers/power/reset/keystone-reset.c
@@ -0,0 +1,166 @@
+/*
+ * TI keystone reboot driver
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <asm/system_misc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+
+#define RSTYPE_RG 0x0
+#define RSCTRL_RG 0x4
+#define RSCFG_RG 0x8
+#define RSISO_RG 0xc
+
+#define RSCTRL_KEY_MASK 0x0000ffff
+#define RSCTRL_RESET_MASK BIT(16)
+#define RSCTRL_KEY 0x5a69
+
+#define RSMUX_OMODE_MASK 0xe
+#define RSMUX_OMODE_RESET_ON 0xa
+#define RSMUX_OMODE_RESET_OFF 0x0
+#define RSMUX_LOCK_MASK 0x1
+#define RSMUX_LOCK_SET 0x1
+
+#define RSCFG_RSTYPE_SOFT 0x300f
+#define RSCFG_RSTYPE_HARD 0x0
+
+#define WDT_MUX_NUMBER 0x4
+
+static int rspll_offset;
+static struct regmap *pllctrl_regs;
+
+/**
+ * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
+ * To be able to access to RSCTRL, RSCFG registers
+ * we have to write a key before
+ */
+static inline int rsctrl_enable_rspll_write(void)
+{
+ return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+ RSCTRL_KEY_MASK, RSCTRL_KEY);
+}
+
+static void rsctrl_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* enable write access to RSTCTRL */
+ rsctrl_enable_rspll_write();
+
+ /* reset the SOC */
+ regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+ RSCTRL_RESET_MASK, 0);
+}
+
+static struct of_device_id rsctrl_of_match[] = {
+ {.compatible = "ti,keystone-reset", },
+ {},
+};
+
+static int rsctrl_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+ u32 val;
+ unsigned int rg;
+ u32 rsmux_offset;
+ struct regmap *devctrl_regs;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ /* get regmaps */
+ pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
+ if (IS_ERR(pllctrl_regs))
+ return PTR_ERR(pllctrl_regs);
+
+ devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
+ if (IS_ERR(devctrl_regs))
+ return PTR_ERR(devctrl_regs);
+
+ ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
+ if (ret) {
+ dev_err(dev, "couldn't read the reset pll offset!\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
+ if (ret) {
+ dev_err(dev, "couldn't read the rsmux offset!\n");
+ return -EINVAL;
+ }
+
+ /* set soft/hard reset */
+ val = of_property_read_bool(np, "ti,soft-reset");
+ val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
+
+ ret = rsctrl_enable_rspll_write();
+ if (ret)
+ return ret;
+
+ ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
+ if (ret)
+ return ret;
+
+ arm_pm_restart = rsctrl_restart;
+
+ /* disable a reset isolation for all module clocks */
+ ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
+ if (ret)
+ return ret;
+
+ /* enable a reset for watchdogs from wdt-list */
+ for (i = 0; i < WDT_MUX_NUMBER; i++) {
+ ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
+ if (ret == -EOVERFLOW && !i) {
+ dev_err(dev, "ti,wdt-list property has to contain at"
+ "least one entry\n");
+ return -EINVAL;
+ } else if (ret) {
+ break;
+ }
+
+ if (val >= WDT_MUX_NUMBER) {
+ dev_err(dev, "ti,wdt-list property can contain"
+ "only numbers < 4\n");
+ return -EINVAL;
+ }
+
+ rg = rsmux_offset + val * 4;
+
+ ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
+ RSMUX_OMODE_RESET_ON |
+ RSMUX_LOCK_SET);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver rsctrl_driver = {
+ .probe = rsctrl_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ .of_match_table = rsctrl_of_match,
+ },
+};
+module_platform_driver(rsctrl_driver);
+
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
diff --git a/drivers/power/reset/sun6i-reboot.c b/drivers/power/reset/sun6i-reboot.c
new file mode 100644
index 000000000000..af2cd7ff2fe8
--- /dev/null
+++ b/drivers/power/reset/sun6i-reboot.c
@@ -0,0 +1,85 @@
+/*
+ * Allwinner A31 SoCs reset code
+ *
+ * Copyright (C) 2012-2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+#define SUN6I_WATCHDOG1_IRQ_REG 0x00
+#define SUN6I_WATCHDOG1_CTRL_REG 0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG 0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG 0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0)
+
+static void __iomem *wdt_base;
+
+static void sun6i_wdt_restart(enum reboot_mode mode, const char *cmd)
+{
+ if (!wdt_base)
+ return;
+
+ /* Disable interrupts */
+ writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
+
+ /* We want to disable the IRQ and just reset the whole system */
+ writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
+ wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
+
+ /* Enable timer. The default and lowest interval value is 0.5s */
+ writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+ wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+
+ /* Restart the watchdog. */
+ writel(SUN6I_WATCHDOG1_CTRL_RESTART,
+ wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
+
+ while (1) {
+ mdelay(5);
+ writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+ wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+ }
+}
+
+static int sun6i_reboot_probe(struct platform_device *pdev)
+{
+ wdt_base = of_iomap(pdev->dev.of_node, 0);
+ if (!wdt_base) {
+ WARN(1, "failed to map watchdog base address");
+ return -ENODEV;
+ }
+
+ arm_pm_restart = sun6i_wdt_restart;
+
+ return 0;
+}
+
+static struct of_device_id sun6i_reboot_of_match[] = {
+ { .compatible = "allwinner,sun6i-a31-wdt" },
+ {}
+};
+
+static struct platform_driver sun6i_reboot_driver = {
+ .probe = sun6i_reboot_probe,
+ .driver = {
+ .name = "sun6i-reboot",
+ .of_match_table = sun6i_reboot_of_match,
+ },
+};
+module_platform_driver(sun6i_reboot_driver);