summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/pinctrl-ingenic.c4
-rw-r--r--drivers/pinctrl/pinctrl-ocelot.c17
-rw-r--r--drivers/pinctrl/pinctrl-zynqmp.c9
-rw-r--r--drivers/pinctrl/qcom/pinctrl-msm.c21
4 files changed, 36 insertions, 15 deletions
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 7e732076dedf..9e46d83e5138 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -667,7 +667,7 @@ static u8 jz4755_lcd_24bit_funcs[] = { 1, 1, 1, 1, 0, 0, };
static const struct group_desc jz4755_groups[] = {
INGENIC_PIN_GROUP("uart0-data", jz4755_uart0_data, 0),
INGENIC_PIN_GROUP("uart0-hwflow", jz4755_uart0_hwflow, 0),
- INGENIC_PIN_GROUP("uart1-data", jz4755_uart1_data, 0),
+ INGENIC_PIN_GROUP("uart1-data", jz4755_uart1_data, 1),
INGENIC_PIN_GROUP("uart2-data", jz4755_uart2_data, 1),
INGENIC_PIN_GROUP("ssi-dt-b", jz4755_ssi_dt_b, 0),
INGENIC_PIN_GROUP("ssi-dt-f", jz4755_ssi_dt_f, 0),
@@ -721,7 +721,7 @@ static const char *jz4755_ssi_groups[] = {
"ssi-ce1-b", "ssi-ce1-f",
};
static const char *jz4755_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
-static const char *jz4755_mmc1_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *jz4755_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", };
static const char *jz4755_i2c_groups[] = { "i2c-data", };
static const char *jz4755_cim_groups[] = { "cim-data", };
static const char *jz4755_lcd_groups[] = {
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 62ce3957abe4..687aaa601555 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -1864,19 +1864,28 @@ static void ocelot_irq_unmask_level(struct irq_data *data)
if (val & bit)
ack = true;
+ /* Try to clear any rising edges */
+ if (!active && ack)
+ regmap_write_bits(info->map, REG(OCELOT_GPIO_INTR, info, gpio),
+ bit, bit);
+
/* Enable the interrupt now */
gpiochip_enable_irq(chip, gpio);
regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio),
bit, bit);
/*
- * In case the interrupt line is still active and the interrupt
- * controller has not seen any changes in the interrupt line, then it
- * means that there happen another interrupt while the line was active.
+ * In case the interrupt line is still active then it means that
+ * there happen another interrupt while the line was active.
* So we missed that one, so we need to kick the interrupt again
* handler.
*/
- if (active && !ack) {
+ regmap_read(info->map, REG(OCELOT_GPIO_IN, info, gpio), &val);
+ if ((!(val & bit) && trigger_level == IRQ_TYPE_LEVEL_LOW) ||
+ (val & bit && trigger_level == IRQ_TYPE_LEVEL_HIGH))
+ active = true;
+
+ if (active) {
struct ocelot_irq_work *work;
work = kmalloc(sizeof(*work), GFP_ATOMIC);
diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c
index 7d2fbf8a02cd..c98f35ad8921 100644
--- a/drivers/pinctrl/pinctrl-zynqmp.c
+++ b/drivers/pinctrl/pinctrl-zynqmp.c
@@ -412,10 +412,6 @@ static int zynqmp_pinconf_cfg_set(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- param = PM_PINCTRL_CONFIG_TRI_STATE;
- arg = PM_PINCTRL_TRI_STATE_ENABLE;
- ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
- break;
case PIN_CONFIG_MODE_LOW_POWER:
/*
* These cases are mentioned in dts but configurable
@@ -424,11 +420,6 @@ static int zynqmp_pinconf_cfg_set(struct pinctrl_dev *pctldev,
*/
ret = 0;
break;
- case PIN_CONFIG_OUTPUT_ENABLE:
- param = PM_PINCTRL_CONFIG_TRI_STATE;
- arg = PM_PINCTRL_TRI_STATE_DISABLE;
- ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
- break;
default:
dev_warn(pctldev->dev,
"unsupported configuration parameter '%u'\n",
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index a2abfe987ab1..8bf8b21954fe 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -51,6 +51,7 @@
* detection.
* @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller
* @disabled_for_mux: These IRQs were disabled because we muxed away.
+ * @ever_gpio: This bit is set the first time we mux a pin to gpio_func.
* @soc: Reference to soc_data of platform specific data.
* @regs: Base addresses for the TLMM tiles.
* @phys_base: Physical base address
@@ -72,6 +73,7 @@ struct msm_pinctrl {
DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(disabled_for_mux, MAX_NR_GPIO);
+ DECLARE_BITMAP(ever_gpio, MAX_NR_GPIO);
const struct msm_pinctrl_soc_data *soc;
void __iomem *regs[MAX_NR_TILES];
@@ -218,6 +220,25 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
val = msm_readl_ctl(pctrl, g);
+ /*
+ * If this is the first time muxing to GPIO and the direction is
+ * output, make sure that we're not going to be glitching the pin
+ * by reading the current state of the pin and setting it as the
+ * output.
+ */
+ if (i == gpio_func && (val & BIT(g->oe_bit)) &&
+ !test_and_set_bit(group, pctrl->ever_gpio)) {
+ u32 io_val = msm_readl_io(pctrl, g);
+
+ if (io_val & BIT(g->in_bit)) {
+ if (!(io_val & BIT(g->out_bit)))
+ msm_writel_io(io_val | BIT(g->out_bit), pctrl, g);
+ } else {
+ if (io_val & BIT(g->out_bit))
+ msm_writel_io(io_val & ~BIT(g->out_bit), pctrl, g);
+ }
+ }
+
if (egpio_func && i == egpio_func) {
if (val & BIT(g->egpio_present))
val &= ~BIT(g->egpio_enable);