diff options
Diffstat (limited to 'drivers/pci/pci.h')
| -rw-r--r-- | drivers/pci/pci.h | 100 |
1 files changed, 81 insertions, 19 deletions
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fd44565c4756..79c8398f3938 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -17,11 +17,54 @@ #define PCIE_T_PVPERL_MS 100 /* + * End of conventional reset (PERST# de-asserted) to first configuration + * request (device able to respond with a "Request Retry Status" completion), + * from PCIe r6.0, sec 6.6.1. + */ +#define PCIE_T_RRS_READY_MS 100 + +/* * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization> * Recommends 1ms to 10ms timeout to check L2 ready. */ #define PCIE_PME_TO_L2_TIMEOUT_US 10000 +/* + * PCIe r6.0, sec 6.6.1 <Conventional Reset> + * + * - "With a Downstream Port that does not support Link speeds greater + * than 5.0 GT/s, software must wait a minimum of 100 ms following exit + * from a Conventional Reset before sending a Configuration Request to + * the device immediately below that Port." + * + * - "With a Downstream Port that supports Link speeds greater than + * 5.0 GT/s, software must wait a minimum of 100 ms after Link training + * completes before sending a Configuration Request to the device + * immediately below that Port." + */ +#define PCIE_RESET_CONFIG_DEVICE_WAIT_MS 100 + +/* Message Routing (r[2:0]); PCIe r6.0, sec 2.2.8 */ +#define PCIE_MSG_TYPE_R_RC 0 +#define PCIE_MSG_TYPE_R_ADDR 1 +#define PCIE_MSG_TYPE_R_ID 2 +#define PCIE_MSG_TYPE_R_BC 3 +#define PCIE_MSG_TYPE_R_LOCAL 4 +#define PCIE_MSG_TYPE_R_GATHER 5 + +/* Power Management Messages; PCIe r6.0, sec 2.2.8.2 */ +#define PCIE_MSG_CODE_PME_TURN_OFF 0x19 + +/* INTx Mechanism Messages; PCIe r6.0, sec 2.2.8.1 */ +#define PCIE_MSG_CODE_ASSERT_INTA 0x20 +#define PCIE_MSG_CODE_ASSERT_INTB 0x21 +#define PCIE_MSG_CODE_ASSERT_INTC 0x22 +#define PCIE_MSG_CODE_ASSERT_INTD 0x23 +#define PCIE_MSG_CODE_DEASSERT_INTA 0x24 +#define PCIE_MSG_CODE_DEASSERT_INTB 0x25 +#define PCIE_MSG_CODE_DEASSERT_INTC 0x26 +#define PCIE_MSG_CODE_DEASSERT_INTD 0x27 + extern const unsigned char pcie_link_speed[]; extern bool pci_early_dump; @@ -290,6 +333,28 @@ void pci_bus_put(struct pci_bus *bus); (speed) == PCIE_SPEED_2_5GT ? 2500*8/10 : \ 0) +static inline int pcie_dev_speed_mbps(enum pci_bus_speed speed) +{ + switch (speed) { + case PCIE_SPEED_2_5GT: + return 2500; + case PCIE_SPEED_5_0GT: + return 5000; + case PCIE_SPEED_8_0GT: + return 8000; + case PCIE_SPEED_16_0GT: + return 16000; + case PCIE_SPEED_32_0GT: + return 32000; + case PCIE_SPEED_64_0GT: + return 64000; + default: + break; + } + + return -EINVAL; +} + const char *pci_speed_string(enum pci_bus_speed speed); enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev); enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev); @@ -648,6 +713,7 @@ int of_pci_get_max_link_speed(struct device_node *node); u32 of_pci_get_slot_power_limit(struct device_node *node, u8 *slot_power_limit_value, u8 *slot_power_limit_scale); +bool of_pci_preserve_config(struct device_node *node); int pci_set_of_node(struct pci_dev *dev); void pci_release_of_node(struct pci_dev *dev); void pci_set_bus_of_node(struct pci_bus *bus); @@ -686,6 +752,11 @@ of_pci_get_slot_power_limit(struct device_node *node, return 0; } +static inline bool of_pci_preserve_config(struct device_node *node) +{ + return false; +} + static inline int pci_set_of_node(struct pci_dev *dev) { return 0; } static inline void pci_release_of_node(struct pci_dev *dev) { } static inline void pci_set_bus_of_node(struct pci_bus *bus) { } @@ -732,6 +803,7 @@ static inline void pci_restore_aer_state(struct pci_dev *dev) { } #endif #ifdef CONFIG_ACPI +bool pci_acpi_preserve_config(struct pci_host_bridge *bridge); int pci_acpi_program_hp_params(struct pci_dev *dev); extern const struct attribute_group pci_dev_acpi_attr_group; void pci_set_acpi_fwnode(struct pci_dev *dev); @@ -745,6 +817,10 @@ int acpi_pci_wakeup(struct pci_dev *dev, bool enable); bool acpi_pci_need_resume(struct pci_dev *dev); pci_power_t acpi_pci_choose_state(struct pci_dev *pdev); #else +static inline bool pci_acpi_preserve_config(struct pci_host_bridge *bridge) +{ + return false; +} static inline int pci_dev_acpi_reset(struct pci_dev *dev, bool probe) { return -ENOTTY; @@ -810,26 +886,12 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev) } #endif -/* - * Managed PCI resources. This manages device on/off, INTx/MSI/MSI-X - * on/off and BAR regions. pci_dev itself records MSI/MSI-X status, so - * there's no need to track it separately. pci_devres is initialized - * when a device is enabled using managed PCI device enable interface. - * - * TODO: Struct pci_devres and find_pci_dr() only need to be here because - * they're used in pci.c. Port or move these functions to devres.c and - * then remove them from here. - */ -struct pci_devres { - unsigned int enabled:1; - unsigned int pinned:1; - unsigned int orig_intx:1; - unsigned int restore_intx:1; - unsigned int mwi:1; - u32 region_mask; -}; +int pcim_intx(struct pci_dev *dev, int enable); -struct pci_devres *find_pci_dr(struct pci_dev *pdev); +int pcim_request_region(struct pci_dev *pdev, int bar, const char *name); +int pcim_request_region_exclusive(struct pci_dev *pdev, int bar, + const char *name); +void pcim_release_region(struct pci_dev *pdev, int bar); /* * Config Address for PCI Configuration Mechanism #1 |