summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/plda/pcie-microchip-host.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/controller/plda/pcie-microchip-host.c')
-rw-r--r--drivers/pci/controller/plda/pcie-microchip-host.c96
1 files changed, 96 insertions, 0 deletions
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 6630cacef301..3fdfffdf0270 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -7,20 +7,27 @@
* Author: Daire McNamara <daire.mcnamara@microchip.com>
*/
+#include <linux/align.h>
+#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
+#include <linux/log2.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
+#include <linux/wordpart.h>
#include "../../pci.h"
#include "pcie-plda.h"
+#define MC_MAX_NUM_INBOUND_WINDOWS 8
+#define MPFS_NC_BOUNCE_ADDR 0x80000000
+
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
#define MC_PCIE1_CTRL_ADDR 0x0000a000u
@@ -607,6 +614,91 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), port->bridge_base_addr + ISTATUS_HOST);
}
+static void mc_pcie_setup_inbound_atr(struct mc_pcie *port, int window_index,
+ u64 axi_addr, u64 pcie_addr, u64 size)
+{
+ u32 table_offset = window_index * ATR_ENTRY_SIZE;
+ void __iomem *table_addr = port->bridge_base_addr + table_offset;
+ u32 atr_sz;
+ u32 val;
+
+ atr_sz = ilog2(size) - 1;
+
+ val = ALIGN_DOWN(lower_32_bits(pcie_addr), SZ_4K);
+ val |= FIELD_PREP(ATR_SIZE_MASK, atr_sz);
+ val |= ATR_IMPL_ENABLE;
+
+ writel(val, table_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+
+ writel(upper_32_bits(pcie_addr), table_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+
+ writel(lower_32_bits(axi_addr), table_addr + ATR0_PCIE_WIN0_TRSL_ADDR_LSB);
+ writel(upper_32_bits(axi_addr), table_addr + ATR0_PCIE_WIN0_TRSL_ADDR_UDW);
+
+ writel(TRSL_ID_AXI4_MASTER_0, table_addr + ATR0_PCIE_WIN0_TRSL_PARAM);
+}
+
+static int mc_pcie_setup_inbound_ranges(struct platform_device *pdev,
+ struct mc_pcie *port)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node;
+ struct of_range_parser parser;
+ struct of_range range;
+ int atr_index = 0;
+
+ /*
+ * MPFS PCIe Root Port is 32-bit only, behind a Fabric Interface
+ * Controller FPGA logic block which contains the AXI-S interface.
+ *
+ * From the point of view of the PCIe Root Port, there are only two
+ * supported Root Port configurations:
+ *
+ * Configuration 1: for use with fully coherent designs; supports a
+ * window from 0x0 (CPU space) to specified PCIe space.
+ *
+ * Configuration 2: for use with non-coherent designs; supports two
+ * 1 GB windows to CPU space; one mapping CPU space 0 to PCIe space
+ * 0x80000000 and a second mapping CPU space 0x40000000 to PCIe
+ * space 0xc0000000. This cfg needs two windows because of how the
+ * MSI space is allocated in the AXI-S range on MPFS.
+ *
+ * The FIC interface outside the PCIe block *must* complete the
+ * inbound address translation as per MCHP MPFS FPGA design
+ * guidelines.
+ */
+ if (device_property_read_bool(dev, "dma-noncoherent")) {
+ /*
+ * Always need same two tables in this case. Need two tables
+ * due to hardware interactions between address and size.
+ */
+ mc_pcie_setup_inbound_atr(port, 0, 0,
+ MPFS_NC_BOUNCE_ADDR, SZ_1G);
+ mc_pcie_setup_inbound_atr(port, 1, SZ_1G,
+ MPFS_NC_BOUNCE_ADDR + SZ_1G, SZ_1G);
+ } else {
+ /* Find any DMA ranges */
+ if (of_pci_dma_range_parser_init(&parser, dn)) {
+ /* No DMA range property - setup default */
+ mc_pcie_setup_inbound_atr(port, 0, 0, 0, SZ_4G);
+ return 0;
+ }
+
+ for_each_of_range(&parser, &range) {
+ if (atr_index >= MC_MAX_NUM_INBOUND_WINDOWS) {
+ dev_err(dev, "too many inbound ranges; %d available tables\n",
+ MC_MAX_NUM_INBOUND_WINDOWS);
+ return -EINVAL;
+ }
+ mc_pcie_setup_inbound_atr(port, atr_index, 0,
+ range.pci_addr, range.size);
+ atr_index++;
+ }
+ }
+
+ return 0;
+}
+
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -627,6 +719,10 @@ static int mc_platform_init(struct pci_config_window *cfg)
if (ret)
return ret;
+ ret = mc_pcie_setup_inbound_ranges(pdev, port);
+ if (ret)
+ return ret;
+
port->plda.event_ops = &mc_event_ops;
port->plda.event_irq_chip = &mc_event_irq_chip;
port->plda.events_bitmap = GENMASK(NUM_EVENTS - 1, 0);