diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-designware-host.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-host.c | 56 |
1 files changed, 35 insertions, 21 deletions
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index d2291c3ceb8b..ffaded8f2df7 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -436,18 +436,18 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) return ret; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); - if (res) { - pp->cfg0_size = resource_size(res); - pp->cfg0_base = res->start; - - pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res); - if (IS_ERR(pp->va_cfg0_base)) - return PTR_ERR(pp->va_cfg0_base); - } else { - dev_err(dev, "Missing *config* reg space\n"); + if (!res) { + dev_err(dev, "Missing \"config\" reg space\n"); return -ENODEV; } + pp->cfg0_size = resource_size(res); + pp->cfg0_base = res->start; + + pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res); + if (IS_ERR(pp->va_cfg0_base)) + return PTR_ERR(pp->va_cfg0_base); + bridge = devm_pci_alloc_host_bridge(dev, 0); if (!bridge) return -ENOMEM; @@ -530,8 +530,14 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) goto err_remove_edma; } - /* Ignore errors, the link may come up later */ - dw_pcie_wait_for_link(pci); + /* + * Note: Skip the link up delay only when a Link Up IRQ is present. + * If there is no Link Up IRQ, we should not bypass the delay + * because that would require users to manually rescan for devices. + */ + if (!pp->use_linkup_irq) + /* Ignore errors, the link may come up later */ + dw_pcie_wait_for_link(pci); bridge->sysdata = pp; @@ -918,7 +924,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci) { u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); u32 val; - int ret = 0; + int ret; /* * If L1SS is supported, then do not put the link into L2 as some @@ -927,25 +933,33 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci) if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1) return 0; - if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT) - return 0; - - if (pci->pp.ops->pme_turn_off) + if (pci->pp.ops->pme_turn_off) { pci->pp.ops->pme_turn_off(&pci->pp); - else + } else { ret = dw_pcie_pme_turn_off(pci); + if (ret) + return ret; + } - if (ret) - return ret; - - ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE, + ret = read_poll_timeout(dw_pcie_get_ltssm, val, + val == DW_PCIE_LTSSM_L2_IDLE || + val <= DW_PCIE_LTSSM_DETECT_WAIT, PCIE_PME_TO_L2_TIMEOUT_US/10, PCIE_PME_TO_L2_TIMEOUT_US, false, pci); if (ret) { + /* Only log message when LTSSM isn't in DETECT or POLL */ dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val); return ret; } + /* + * Per PCIe r6.0, sec 5.3.3.2.1, software should wait at least + * 100ns after L2/L3 Ready before turning off refclock and + * main power. This is harmless when no endpoint is connected. + */ + udelay(1); + + dw_pcie_stop_link(pci); if (pci->pp.ops->deinit) pci->pp.ops->deinit(&pci->pp); |