diff options
Diffstat (limited to 'drivers/net/wireless/marvell/libertas/cmd.c')
| -rw-r--r-- | drivers/net/wireless/marvell/libertas/cmd.c | 143 |
1 files changed, 4 insertions, 139 deletions
diff --git a/drivers/net/wireless/marvell/libertas/cmd.c b/drivers/net/wireless/marvell/libertas/cmd.c index 5a525da434c2..21fde876bb0d 100644 --- a/drivers/net/wireless/marvell/libertas/cmd.c +++ b/drivers/net/wireless/marvell/libertas/cmd.c @@ -453,46 +453,6 @@ out: } /** - * lbs_get_snmp_mib - Get an SNMP MIB value - * - * @priv: A pointer to &struct lbs_private structure - * @oid: The OID to retrieve from the firmware - * @out_val: Location for the returned value - * - * returns: 0 on success, error on failure - */ -int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val) -{ - struct cmd_ds_802_11_snmp_mib cmd; - int ret; - - memset(&cmd, 0, sizeof (cmd)); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - cmd.action = cpu_to_le16(CMD_ACT_GET); - cmd.oid = cpu_to_le16(oid); - - ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); - if (ret) - goto out; - - switch (le16_to_cpu(cmd.bufsize)) { - case sizeof(u8): - *out_val = cmd.value[0]; - break; - case sizeof(u16): - *out_val = le16_to_cpu(*((__le16 *)(&cmd.value))); - break; - default: - lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n", - oid, le16_to_cpu(cmd.bufsize)); - break; - } - -out: - return ret; -} - -/** * lbs_get_tx_power - Get the min, max, and current TX power * * @priv: A pointer to &struct lbs_private structure @@ -525,31 +485,6 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, } /** - * lbs_set_tx_power - Set the TX power - * - * @priv: A pointer to &struct lbs_private structure - * @dbm: The desired power level in dBm - * - * returns: 0 on success, error on failure - */ -int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) -{ - struct cmd_ds_802_11_rf_tx_power cmd; - int ret; - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - cmd.action = cpu_to_le16(CMD_ACT_SET); - cmd.curlevel = cpu_to_le16(dbm); - - lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm); - - ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); - - return ret; -} - -/** * lbs_set_monitor_mode - Enable or disable monitor mode * (only implemented on OLPC usb8388 FW) * @@ -968,10 +903,6 @@ static void lbs_submit_command(struct lbs_private *priv, } if (command == CMD_802_11_DEEP_SLEEP) { - if (priv->is_auto_deep_sleep_enabled) { - priv->wakeup_dev_required = 1; - priv->dnld_sent = 0; - } priv->is_deep_sleep = 1; lbs_complete_command(priv, cmdnode, 0); } else { @@ -1440,70 +1371,6 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) } -/** - * lbs_set_tpc_cfg - Configures the transmission power control functionality - * - * @priv: A pointer to &struct lbs_private structure - * @enable: Transmission power control enable - * @p0: Power level when link quality is good (dBm). - * @p1: Power level when link quality is fair (dBm). - * @p2: Power level when link quality is poor (dBm). - * @usesnr: Use Signal to Noise Ratio in TPC - * - * returns: 0 on success - */ -int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, - int8_t p2, int usesnr) -{ - struct cmd_ds_802_11_tpc_cfg cmd; - int ret; - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - cmd.action = cpu_to_le16(CMD_ACT_SET); - cmd.enable = !!enable; - cmd.usesnr = !!usesnr; - cmd.P0 = p0; - cmd.P1 = p1; - cmd.P2 = p2; - - ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd); - - return ret; -} - -/** - * lbs_set_power_adapt_cfg - Configures the power adaptation settings - * - * @priv: A pointer to &struct lbs_private structure - * @enable: Power adaptation enable - * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm). - * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). - * @p2: Power level for 48 and 54 Mbps (dBm). - * - * returns: 0 on Success - */ - -int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, - int8_t p1, int8_t p2) -{ - struct cmd_ds_802_11_pa_cfg cmd; - int ret; - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - cmd.action = cpu_to_le16(CMD_ACT_SET); - cmd.enable = !!enable; - cmd.P0 = p0; - cmd.P1 = p1; - cmd.P2 = p2; - - ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd); - - return ret; -} - - struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), @@ -1520,12 +1387,10 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, /* No commands are allowed in Deep Sleep until we toggle the GPIO * to wake up the card and it has signaled that it's ready. */ - if (!priv->is_auto_deep_sleep_enabled) { - if (priv->is_deep_sleep) { - lbs_deb_cmd("command not allowed in deep sleep\n"); - cmdnode = ERR_PTR(-EBUSY); - goto done; - } + if (priv->is_deep_sleep) { + lbs_deb_cmd("command not allowed in deep sleep\n"); + cmdnode = ERR_PTR(-EBUSY); + goto done; } cmdnode = lbs_get_free_cmd_node(priv); |