diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/commands.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/dvm/commands.h | 154 |
1 files changed, 78 insertions, 76 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/commands.h b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h index 3f49c0bccb28..96ea6c8dfc89 100644 --- a/drivers/net/wireless/intel/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h @@ -1180,85 +1180,87 @@ struct iwl_dram_scratch { } __packed; struct iwl_tx_cmd { - /* - * MPDU byte count: - * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, - * + 8 byte IV for CCM or TKIP (not used for WEP) - * + Data payload - * + 8-byte MIC (not used for CCM/WEP) - * NOTE: Does not include Tx command bytes, post-MAC pad bytes, - * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i - * Range: 14-2342 bytes. - */ - __le16 len; - - /* - * MPDU or MSDU byte count for next frame. - * Used for fragmentation and bursting, but not 11n aggregation. - * Same as "len", but for next frame. Set to 0 if not applicable. - */ - __le16 next_frame_len; - - __le32 tx_flags; /* TX_CMD_FLG_* */ - - /* uCode may modify this field of the Tx command (in host DRAM!). - * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ - struct iwl_dram_scratch scratch; - - /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* Index of destination station in uCode's station table */ - u8 sta_id; - - /* Type of security encryption: CCM or TKIP */ - u8 sec_ctl; /* TX_CMD_SEC_* */ - - /* - * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial - * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for - * data frames, this field may be used to selectively reduce initial - * rate (via non-0 value) for special frames (e.g. management), while - * still supporting rate scaling for all frames. - */ - u8 initial_rate_index; - u8 reserved; - u8 key[16]; - __le16 next_frame_flags; - __le16 reserved2; - union { - __le32 life_time; - __le32 attempt; - } stop_time; - - /* Host DRAM physical address pointer to "scratch" in this command. - * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ - __le32 dram_lsb_ptr; - u8 dram_msb_ptr; - - u8 rts_retry_limit; /*byte 50 */ - u8 data_retry_limit; /*byte 51 */ - u8 tid_tspec; - union { - __le16 pm_frame_timeout; - __le16 attempt_duration; - } timeout; - - /* - * Duration of EDCA burst Tx Opportunity, in 32-usec units. - * Set this if txop time is not specified by HCCA protocol (e.g. by AP). - */ - __le16 driver_txop; - + /* New members MUST be added within the __struct_group() macro below. */ + __struct_group(iwl_tx_cmd_hdr, __hdr, __packed, + /* + * MPDU byte count: + * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * NOTE: Does not include Tx command bytes, post-MAC pad bytes, + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i + * Range: 14-2342 bytes. + */ + __le16 len; + + /* + * MPDU or MSDU byte count for next frame. + * Used for fragmentation and bursting, but not 11n aggregation. + * Same as "len", but for next frame. Set to 0 if not applicable. + */ + __le16 next_frame_len; + + __le32 tx_flags; /* TX_CMD_FLG_* */ + + /* uCode may modify this field of the Tx command (in host DRAM!). + * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ + struct iwl_dram_scratch scratch; + + /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* Index of destination station in uCode's station table */ + u8 sta_id; + + /* Type of security encryption: CCM or TKIP */ + u8 sec_ctl; /* TX_CMD_SEC_* */ + + /* + * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial + * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for + * data frames, this field may be used to selectively reduce initial + * rate (via non-0 value) for special frames (e.g. management), while + * still supporting rate scaling for all frames. + */ + u8 initial_rate_index; + u8 reserved; + u8 key[16]; + __le16 next_frame_flags; + __le16 reserved2; + union { + __le32 life_time; + __le32 attempt; + } stop_time; + + /* Host DRAM physical address pointer to "scratch" in this command. + * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ + __le32 dram_lsb_ptr; + u8 dram_msb_ptr; + + u8 rts_retry_limit; /*byte 50 */ + u8 data_retry_limit; /*byte 51 */ + u8 tid_tspec; + union { + __le16 pm_frame_timeout; + __le16 attempt_duration; + } timeout; + + /* + * Duration of EDCA burst Tx Opportunity, in 32-usec units. + * Set this if txop time is not specified by HCCA protocol (e.g. by AP). + */ + __le16 driver_txop; + + ); /* * MAC header goes here, followed by 2 bytes padding if MAC header * length is 26 or 30 bytes, followed by payload data */ - union { - DECLARE_FLEX_ARRAY(u8, payload); - DECLARE_FLEX_ARRAY(struct ieee80211_hdr, hdr); - }; + struct ieee80211_hdr hdr[]; } __packed; +static_assert(offsetof(struct iwl_tx_cmd, hdr) == sizeof(struct iwl_tx_cmd_hdr), + "struct member likely outside of __struct_group()"); /* * TX command response is sent after *agn* transmission attempts. @@ -2312,7 +2314,7 @@ struct iwl_scan_cmd { /* For active scans (set to all-0s for passive scans). * Does not include payload. Must specify Tx rate; no rate scaling. */ - struct iwl_tx_cmd tx_cmd; + struct iwl_tx_cmd_hdr tx_cmd; /* For directed active scans (set to all-0s otherwise) */ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; @@ -2423,7 +2425,7 @@ struct iwlagn_beacon_notif { */ struct iwl_tx_beacon_cmd { - struct iwl_tx_cmd tx; + struct iwl_tx_cmd_hdr tx; __le16 tim_idx; u8 tim_size; u8 reserved1; |