diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_common.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_common.c | 458 |
1 files changed, 0 insertions, 458 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index e8031f1a9b4f..370b4bddee44 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -1805,37 +1805,6 @@ int i40e_aq_set_vsi_broadcast(struct i40e_hw *hw, } /** - * i40e_aq_set_vsi_vlan_promisc - control the VLAN promiscuous setting - * @hw: pointer to the hw struct - * @seid: vsi number - * @enable: set MAC L2 layer unicast promiscuous enable/disable for a given VLAN - * @cmd_details: pointer to command details structure or NULL - **/ -int i40e_aq_set_vsi_vlan_promisc(struct i40e_hw *hw, - u16 seid, bool enable, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_set_vsi_promiscuous_modes *cmd = - (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; - u16 flags = 0; - int status; - - i40e_fill_default_direct_cmd_desc(&desc, - i40e_aqc_opc_set_vsi_promiscuous_modes); - if (enable) - flags |= I40E_AQC_SET_VSI_PROMISC_VLAN; - - cmd->promiscuous_flags = cpu_to_le16(flags); - cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_VLAN); - cmd->seid = cpu_to_le16(seid); - - status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); - - return status; -} - -/** * i40e_aq_get_vsi_params - get VSI configuration info * @hw: pointer to the hw struct * @vsi_ctx: pointer to a vsi context struct @@ -2436,136 +2405,6 @@ i40e_aq_remove_macvlan_v2(struct i40e_hw *hw, u16 seid, } /** - * i40e_mirrorrule_op - Internal helper function to add/delete mirror rule - * @hw: pointer to the hw struct - * @opcode: AQ opcode for add or delete mirror rule - * @sw_seid: Switch SEID (to which rule refers) - * @rule_type: Rule Type (ingress/egress/VLAN) - * @id: Destination VSI SEID or Rule ID - * @count: length of the list - * @mr_list: list of mirrored VSI SEIDs or VLAN IDs - * @cmd_details: pointer to command details structure or NULL - * @rule_id: Rule ID returned from FW - * @rules_used: Number of rules used in internal switch - * @rules_free: Number of rules free in internal switch - * - * Add/Delete a mirror rule to a specific switch. Mirror rules are supported for - * VEBs/VEPA elements only - **/ -static int i40e_mirrorrule_op(struct i40e_hw *hw, - u16 opcode, u16 sw_seid, u16 rule_type, u16 id, - u16 count, __le16 *mr_list, - struct i40e_asq_cmd_details *cmd_details, - u16 *rule_id, u16 *rules_used, u16 *rules_free) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_add_delete_mirror_rule *cmd = - (struct i40e_aqc_add_delete_mirror_rule *)&desc.params.raw; - struct i40e_aqc_add_delete_mirror_rule_completion *resp = - (struct i40e_aqc_add_delete_mirror_rule_completion *)&desc.params.raw; - u16 buf_size; - int status; - - buf_size = count * sizeof(*mr_list); - - /* prep the rest of the request */ - i40e_fill_default_direct_cmd_desc(&desc, opcode); - cmd->seid = cpu_to_le16(sw_seid); - cmd->rule_type = cpu_to_le16(rule_type & - I40E_AQC_MIRROR_RULE_TYPE_MASK); - cmd->num_entries = cpu_to_le16(count); - /* Dest VSI for add, rule_id for delete */ - cmd->destination = cpu_to_le16(id); - if (mr_list) { - desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | - I40E_AQ_FLAG_RD)); - if (buf_size > I40E_AQ_LARGE_BUF) - desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); - } - - status = i40e_asq_send_command(hw, &desc, mr_list, buf_size, - cmd_details); - if (!status || - hw->aq.asq_last_status == I40E_AQ_RC_ENOSPC) { - if (rule_id) - *rule_id = le16_to_cpu(resp->rule_id); - if (rules_used) - *rules_used = le16_to_cpu(resp->mirror_rules_used); - if (rules_free) - *rules_free = le16_to_cpu(resp->mirror_rules_free); - } - return status; -} - -/** - * i40e_aq_add_mirrorrule - add a mirror rule - * @hw: pointer to the hw struct - * @sw_seid: Switch SEID (to which rule refers) - * @rule_type: Rule Type (ingress/egress/VLAN) - * @dest_vsi: SEID of VSI to which packets will be mirrored - * @count: length of the list - * @mr_list: list of mirrored VSI SEIDs or VLAN IDs - * @cmd_details: pointer to command details structure or NULL - * @rule_id: Rule ID returned from FW - * @rules_used: Number of rules used in internal switch - * @rules_free: Number of rules free in internal switch - * - * Add mirror rule. Mirror rules are supported for VEBs or VEPA elements only - **/ -int i40e_aq_add_mirrorrule(struct i40e_hw *hw, u16 sw_seid, - u16 rule_type, u16 dest_vsi, u16 count, - __le16 *mr_list, - struct i40e_asq_cmd_details *cmd_details, - u16 *rule_id, u16 *rules_used, u16 *rules_free) -{ - if (!(rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS || - rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS)) { - if (count == 0 || !mr_list) - return -EINVAL; - } - - return i40e_mirrorrule_op(hw, i40e_aqc_opc_add_mirror_rule, sw_seid, - rule_type, dest_vsi, count, mr_list, - cmd_details, rule_id, rules_used, rules_free); -} - -/** - * i40e_aq_delete_mirrorrule - delete a mirror rule - * @hw: pointer to the hw struct - * @sw_seid: Switch SEID (to which rule refers) - * @rule_type: Rule Type (ingress/egress/VLAN) - * @count: length of the list - * @rule_id: Rule ID that is returned in the receive desc as part of - * add_mirrorrule. - * @mr_list: list of mirrored VLAN IDs to be removed - * @cmd_details: pointer to command details structure or NULL - * @rules_used: Number of rules used in internal switch - * @rules_free: Number of rules free in internal switch - * - * Delete a mirror rule. Mirror rules are supported for VEBs/VEPA elements only - **/ -int i40e_aq_delete_mirrorrule(struct i40e_hw *hw, u16 sw_seid, - u16 rule_type, u16 rule_id, u16 count, - __le16 *mr_list, - struct i40e_asq_cmd_details *cmd_details, - u16 *rules_used, u16 *rules_free) -{ - /* Rule ID has to be valid except rule_type: INGRESS VLAN mirroring */ - if (rule_type == I40E_AQC_MIRROR_RULE_TYPE_VLAN) { - /* count and mr_list shall be valid for rule_type INGRESS VLAN - * mirroring. For other rule_type, count and rule_type should - * not matter. - */ - if (count == 0 || !mr_list) - return -EINVAL; - } - - return i40e_mirrorrule_op(hw, i40e_aqc_opc_delete_mirror_rule, sw_seid, - rule_type, rule_id, count, mr_list, - cmd_details, NULL, rules_used, rules_free); -} - -/** * i40e_aq_send_msg_to_vf * @hw: pointer to the hardware structure * @vfid: VF id to send msg @@ -3180,41 +3019,6 @@ i40e_aq_update_nvm_exit: } /** - * i40e_aq_rearrange_nvm - * @hw: pointer to the hw struct - * @rearrange_nvm: defines direction of rearrangement - * @cmd_details: pointer to command details structure or NULL - * - * Rearrange NVM structure, available only for transition FW - **/ -int i40e_aq_rearrange_nvm(struct i40e_hw *hw, - u8 rearrange_nvm, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aqc_nvm_update *cmd; - struct i40e_aq_desc desc; - int status; - - cmd = (struct i40e_aqc_nvm_update *)&desc.params.raw; - - i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_update); - - rearrange_nvm &= (I40E_AQ_NVM_REARRANGE_TO_FLAT | - I40E_AQ_NVM_REARRANGE_TO_STRUCT); - - if (!rearrange_nvm) { - status = -EINVAL; - goto i40e_aq_rearrange_nvm_exit; - } - - cmd->command_flags |= rearrange_nvm; - status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); - -i40e_aq_rearrange_nvm_exit: - return status; -} - -/** * i40e_aq_get_lldp_mib * @hw: pointer to the hw struct * @bridge_type: type of bridge requested @@ -3335,44 +3139,6 @@ int i40e_aq_cfg_lldp_mib_change_event(struct i40e_hw *hw, } /** - * i40e_aq_restore_lldp - * @hw: pointer to the hw struct - * @setting: pointer to factory setting variable or NULL - * @restore: True if factory settings should be restored - * @cmd_details: pointer to command details structure or NULL - * - * Restore LLDP Agent factory settings if @restore set to True. In other case - * only returns factory setting in AQ response. - **/ -int -i40e_aq_restore_lldp(struct i40e_hw *hw, u8 *setting, bool restore, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_lldp_restore *cmd = - (struct i40e_aqc_lldp_restore *)&desc.params.raw; - int status; - - if (!test_bit(I40E_HW_CAP_FW_LLDP_PERSISTENT, hw->caps)) { - i40e_debug(hw, I40E_DEBUG_ALL, - "Restore LLDP not supported by current FW version.\n"); - return -ENODEV; - } - - i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_restore); - - if (restore) - cmd->command |= I40E_AQ_LLDP_AGENT_RESTORE; - - status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); - - if (setting) - *setting = cmd->command & 1; - - return status; -} - -/** * i40e_aq_stop_lldp * @hw: pointer to the hw struct * @shutdown_agent: True if LLDP Agent needs to be Shutdown @@ -4570,84 +4336,6 @@ phy_write_end: } /** - * i40e_write_phy_register - * @hw: pointer to the HW structure - * @page: registers page number - * @reg: register address in the page - * @phy_addr: PHY address on MDIO interface - * @value: PHY register value - * - * Writes value to specified PHY register - **/ -int i40e_write_phy_register(struct i40e_hw *hw, - u8 page, u16 reg, u8 phy_addr, u16 value) -{ - int status; - - switch (hw->device_id) { - case I40E_DEV_ID_1G_BASE_T_X722: - status = i40e_write_phy_register_clause22(hw, reg, phy_addr, - value); - break; - case I40E_DEV_ID_1G_BASE_T_BC: - case I40E_DEV_ID_5G_BASE_T_BC: - case I40E_DEV_ID_10G_BASE_T: - case I40E_DEV_ID_10G_BASE_T4: - case I40E_DEV_ID_10G_BASE_T_BC: - case I40E_DEV_ID_10G_BASE_T_X722: - case I40E_DEV_ID_25G_B: - case I40E_DEV_ID_25G_SFP28: - status = i40e_write_phy_register_clause45(hw, page, reg, - phy_addr, value); - break; - default: - status = -EIO; - break; - } - - return status; -} - -/** - * i40e_read_phy_register - * @hw: pointer to the HW structure - * @page: registers page number - * @reg: register address in the page - * @phy_addr: PHY address on MDIO interface - * @value: PHY register value - * - * Reads specified PHY register value - **/ -int i40e_read_phy_register(struct i40e_hw *hw, - u8 page, u16 reg, u8 phy_addr, u16 *value) -{ - int status; - - switch (hw->device_id) { - case I40E_DEV_ID_1G_BASE_T_X722: - status = i40e_read_phy_register_clause22(hw, reg, phy_addr, - value); - break; - case I40E_DEV_ID_1G_BASE_T_BC: - case I40E_DEV_ID_5G_BASE_T_BC: - case I40E_DEV_ID_10G_BASE_T: - case I40E_DEV_ID_10G_BASE_T4: - case I40E_DEV_ID_10G_BASE_T_BC: - case I40E_DEV_ID_10G_BASE_T_X722: - case I40E_DEV_ID_25G_B: - case I40E_DEV_ID_25G_SFP28: - status = i40e_read_phy_register_clause45(hw, page, reg, - phy_addr, value); - break; - default: - status = -EIO; - break; - } - - return status; -} - -/** * i40e_get_phy_address * @hw: pointer to the HW structure * @dev_num: PHY port num that address we want @@ -4663,80 +4351,6 @@ u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num) } /** - * i40e_blink_phy_link_led - * @hw: pointer to the HW structure - * @time: time how long led will blinks in secs - * @interval: gap between LED on and off in msecs - * - * Blinks PHY link LED - **/ -int i40e_blink_phy_link_led(struct i40e_hw *hw, - u32 time, u32 interval) -{ - u16 led_addr = I40E_PHY_LED_PROV_REG_1; - u16 gpio_led_port; - u8 phy_addr = 0; - int status = 0; - u16 led_ctl; - u8 port_num; - u16 led_reg; - u32 i; - - i = rd32(hw, I40E_PFGEN_PORTNUM); - port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); - phy_addr = i40e_get_phy_address(hw, port_num); - - for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++, - led_addr++) { - status = i40e_read_phy_register_clause45(hw, - I40E_PHY_COM_REG_PAGE, - led_addr, phy_addr, - &led_reg); - if (status) - goto phy_blinking_end; - led_ctl = led_reg; - if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) { - led_reg = 0; - status = i40e_write_phy_register_clause45(hw, - I40E_PHY_COM_REG_PAGE, - led_addr, phy_addr, - led_reg); - if (status) - goto phy_blinking_end; - break; - } - } - - if (time > 0 && interval > 0) { - for (i = 0; i < time * 1000; i += interval) { - status = i40e_read_phy_register_clause45(hw, - I40E_PHY_COM_REG_PAGE, - led_addr, phy_addr, &led_reg); - if (status) - goto restore_config; - if (led_reg & I40E_PHY_LED_MANUAL_ON) - led_reg = 0; - else - led_reg = I40E_PHY_LED_MANUAL_ON; - status = i40e_write_phy_register_clause45(hw, - I40E_PHY_COM_REG_PAGE, - led_addr, phy_addr, led_reg); - if (status) - goto restore_config; - msleep(interval); - } - } - -restore_config: - status = i40e_write_phy_register_clause45(hw, - I40E_PHY_COM_REG_PAGE, - led_addr, phy_addr, led_ctl); - -phy_blinking_end: - return status; -} - -/** * i40e_led_get_reg - read LED register * @hw: pointer to the HW structure * @led_addr: LED register address @@ -5269,39 +4883,6 @@ i40e_find_segment_in_package(u32 segment_type, (struct i40e_profile_section_header *)((u8 *)(profile) + (offset)) /** - * i40e_find_section_in_profile - * @section_type: the section type to search for (i.e., SECTION_TYPE_NOTE) - * @profile: pointer to the i40e segment header to be searched - * - * This function searches i40e segment for a particular section type. On - * success it returns a pointer to the section header, otherwise it will - * return NULL. - **/ -struct i40e_profile_section_header * -i40e_find_section_in_profile(u32 section_type, - struct i40e_profile_segment *profile) -{ - struct i40e_profile_section_header *sec; - struct i40e_section_table *sec_tbl; - u32 sec_off; - u32 i; - - if (profile->header.type != SEGMENT_TYPE_I40E) - return NULL; - - I40E_SECTION_TABLE(profile, sec_tbl); - - for (i = 0; i < sec_tbl->section_count; i++) { - sec_off = sec_tbl->section_offset[i]; - sec = I40E_SECTION_HEADER(profile, sec_off); - if (sec->section.type == section_type) - return sec; - } - - return NULL; -} - -/** * i40e_ddp_exec_aq_section - Execute generic AQ for DDP * @hw: pointer to the hw struct * @aq: command buffer containing all data to execute AQ @@ -5524,45 +5105,6 @@ i40e_rollback_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, } /** - * i40e_add_pinfo_to_list - * @hw: pointer to the hardware structure - * @profile: pointer to the profile segment of the package - * @profile_info_sec: buffer for information section - * @track_id: package tracking id - * - * Register a profile to the list of loaded profiles. - */ -int -i40e_add_pinfo_to_list(struct i40e_hw *hw, - struct i40e_profile_segment *profile, - u8 *profile_info_sec, u32 track_id) -{ - struct i40e_profile_section_header *sec = NULL; - struct i40e_profile_info *pinfo; - u32 offset = 0, info = 0; - int status = 0; - - sec = (struct i40e_profile_section_header *)profile_info_sec; - sec->tbl_size = 1; - sec->data_end = sizeof(struct i40e_profile_section_header) + - sizeof(struct i40e_profile_info); - sec->section.type = SECTION_TYPE_INFO; - sec->section.offset = sizeof(struct i40e_profile_section_header); - sec->section.size = sizeof(struct i40e_profile_info); - pinfo = (struct i40e_profile_info *)(profile_info_sec + - sec->section.offset); - pinfo->track_id = track_id; - pinfo->version = profile->version; - pinfo->op = I40E_DDP_ADD_TRACKID; - memcpy(pinfo->name, profile->name, I40E_DDP_NAME_SIZE); - - status = i40e_aq_write_ddp(hw, (void *)sec, sec->data_end, - track_id, &offset, &info, NULL); - - return status; -} - -/** * i40e_aq_add_cloud_filters * @hw: pointer to the hardware structure * @seid: VSI seid to add cloud filters from |