diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 30 |
1 files changed, 25 insertions, 5 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 906b5a6b52d1..e7efc32043e7 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -695,10 +695,16 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts) usleep_range(6000, 10000); /* T4: > 5ms */ - /* end select I2C slave addr */ - error = gpiod_direction_input(ts->gpiod_rst); - if (error) - goto error; + /* + * Put the reset pin back in to input / high-impedance mode to save + * power. Only do this in the non ACPI case since some ACPI boards + * don't have a pull-up, so there the reset pin must stay active-high. + */ + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + goto error; + } return 0; @@ -832,6 +838,14 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) return -EINVAL; } + /* + * Normally we put the reset pin in input / high-impedance mode to save + * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI + * case, leave the pin as is. This results in the pin not being touched + * at all on x86/ACPI boards, except when needed for error-recover. + */ + ts->gpiod_rst_flags = GPIOD_ASIS; + return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); } #else @@ -857,6 +871,12 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return -EINVAL; dev = &ts->client->dev; + /* + * By default we request the reset pin as input, leaving it in + * high-impedance when not resetting the controller to save power. + */ + ts->gpiod_rst_flags = GPIOD_IN; + ts->avdd28 = devm_regulator_get(dev, "AVDD28"); if (IS_ERR(ts->avdd28)) { error = PTR_ERR(ts->avdd28); @@ -894,7 +914,7 @@ retry_get_irq_gpio: ts->gpiod_int = gpiod; /* Get the reset line GPIO pin number */ - gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) |