diff options
Diffstat (limited to 'drivers/iio/adc/ad7606.h')
| -rw-r--r-- | drivers/iio/adc/ad7606.h | 134 |
1 files changed, 107 insertions, 27 deletions
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h index 6649e84d25de..998814a92b82 100644 --- a/drivers/iio/adc/ad7606.h +++ b/drivers/iio/adc/ad7606.h @@ -8,7 +8,9 @@ #ifndef IIO_ADC_AD7606_H_ #define IIO_ADC_AD7606_H_ -#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) { \ +#define AD760X_MAX_CHANNELS 16 + +#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all, bits) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = num, \ @@ -19,39 +21,79 @@ .scan_index = num, \ .scan_type = { \ .sign = 's', \ - .realbits = 16, \ - .storagebits = 16, \ + .realbits = (bits), \ + .storagebits = (bits) > 16 ? 32 : 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define AD7606_SW_CHANNEL(num, bits) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate_available = \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = num, \ + .scan_type = { \ + .sign = 's', \ + .realbits = (bits), \ + .storagebits = (bits) > 16 ? 32 : 16, \ .endianness = IIO_CPU, \ }, \ } #define AD7605_CHANNEL(num) \ AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \ - BIT(IIO_CHAN_INFO_SCALE), 0) + BIT(IIO_CHAN_INFO_SCALE), 0, 16) -#define AD7606_CHANNEL(num) \ +#define AD7606_CHANNEL(num, bits) \ AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \ BIT(IIO_CHAN_INFO_SCALE), \ - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), bits) + +#define AD7616_CHANNEL(num) AD7606_SW_CHANNEL(num, 16) + +#define AD7606_BI_CHANNEL(num) \ + AD760X_CHANNEL(num, 0, \ + BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 16) -#define AD7616_CHANNEL(num) \ - AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\ - 0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) +struct ad7606_state; + +typedef int (*ad7606_scale_setup_cb_t)(struct ad7606_state *st, + struct iio_chan_spec *chan, int ch); /** * struct ad7606_chip_info - chip specific information * @channels: channel specification + * @max_samplerate: maximum supported samplerate + * @name device name * @num_channels: number of channels + * @num_adc_channels the number of channels the ADC actually inputs. + * @scale_setup_cb: callback to setup the scales for each channel * @oversampling_avail pointer to the array which stores the available * oversampling ratios. * @oversampling_num number of elements stored in oversampling_avail array * @os_req_reset some devices require a reset to update oversampling - * @init_delay_ms required delay in miliseconds for initialization + * @init_delay_ms required delay in milliseconds for initialization * after a restart */ struct ad7606_chip_info { const struct iio_chan_spec *channels; + unsigned int max_samplerate; + const char *name; + unsigned int num_adc_channels; unsigned int num_channels; + ad7606_scale_setup_cb_t scale_setup_cb; const unsigned int *oversampling_avail; unsigned int oversampling_num; bool os_req_reset; @@ -59,16 +101,31 @@ struct ad7606_chip_info { }; /** + * struct ad7606_chan_scale - channel scale configuration + * @scale_avail pointer to the array which stores the available scales + * @num_scales number of elements stored in the scale_avail array + * @range voltage range selection, selects which scale to apply + * @reg_offset offset for the register value, to be applied when + * writing the value of 'range' to the register value + */ +struct ad7606_chan_scale { +#define AD760X_MAX_SCALES 16 + const unsigned int (*scale_avail)[2]; + unsigned int num_scales; + unsigned int range; + unsigned int reg_offset; +}; + +/** * struct ad7606_state - driver instance specific data * @dev pointer to kernel device * @chip_info entry in the table of chips that describes this device * @bops bus operations (SPI or parallel) - * @range voltage range selection, selects which scale to apply + * @chan_scales scale configuration for channels * @oversampling oversampling selection + * @cnvst_pwm pointer to the PWM device connected to the cnvst pin * @base_address address from where to read data in parallel operation * @sw_mode_en software mode enabled - * @scale_avail pointer to the array which stores the available scales - * @num_scales number of elements stored in the scale_avail array * @oversampling_avail pointer to the array which stores the available * oversampling ratios. * @num_os_ratios number of elements stored in oversampling_avail array @@ -92,14 +149,14 @@ struct ad7606_state { struct device *dev; const struct ad7606_chip_info *chip_info; const struct ad7606_bus_ops *bops; - unsigned int range[16]; + struct ad7606_chan_scale chan_scales[AD760X_MAX_CHANNELS]; unsigned int oversampling; + struct pwm_device *cnvst_pwm; void __iomem *base_address; bool sw_mode_en; - const unsigned int *scale_avail; - unsigned int num_scales; const unsigned int *oversampling_avail; unsigned int num_os_ratios; + struct iio_backend *back; int (*write_scale)(struct iio_dev *indio_dev, int ch, int val); int (*write_os)(struct iio_dev *indio_dev, int val); @@ -116,24 +173,33 @@ struct ad7606_state { /* * DMA (thus cache coherency maintenance) may require the * transfer buffers to live in their own cache lines. - * 16 * 16-bit samples + 64-bit timestamp + * 16 * 16-bit samples + 64-bit timestamp - for AD7616 + * 8 * 32-bit samples + 64-bit timestamp - for AD7616C-18 (and similar) */ - unsigned short data[20] __aligned(IIO_DMA_MINALIGN); + union { + u16 buf16[20]; + u32 buf32[10]; + } data __aligned(IIO_DMA_MINALIGN); __be16 d16[2]; }; /** * struct ad7606_bus_ops - driver bus operations + * @iio_backend_config function pointer for configuring the iio_backend for + * the compatibles that use it * @read_block function pointer for reading blocks of data * @sw_mode_config: pointer to a function which configured the device * for software mode * @reg_read function pointer for reading spi register * @reg_write function pointer for writing spi register * @write_mask function pointer for write spi register with mask + * @update_scan_mode function pointer for handling the calls to iio_info's update_scan + * mode when enabling/disabling channels. * @rd_wr_cmd pointer to the function which calculates the spi address */ struct ad7606_bus_ops { /* more methods added in future? */ + int (*iio_backend_config)(struct device *dev, struct iio_dev *indio_dev); int (*read_block)(struct device *dev, int num, void *data); int (*sw_mode_config)(struct iio_dev *indio_dev); int (*reg_read)(struct ad7606_state *st, unsigned int addr); @@ -144,23 +210,37 @@ struct ad7606_bus_ops { unsigned int addr, unsigned long mask, unsigned int val); + int (*update_scan_mode)(struct iio_dev *indio_dev, const unsigned long *scan_mask); u16 (*rd_wr_cmd)(int addr, char isWriteOp); }; +/** + * struct ad7606_bus_info - agregate ad7606_chip_info and ad7606_bus_ops + * @chip_info entry in the table of chips that describes this device + * @bops bus operations (SPI or parallel) + */ +struct ad7606_bus_info { + const struct ad7606_chip_info *chip_info; + const struct ad7606_bus_ops *bops; +}; + int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, - const char *name, unsigned int id, + const struct ad7606_chip_info *info, const struct ad7606_bus_ops *bops); int ad7606_reset(struct ad7606_state *st); -enum ad7606_supported_device_ids { - ID_AD7605_4, - ID_AD7606_8, - ID_AD7606_6, - ID_AD7606_4, - ID_AD7606B, - ID_AD7616, -}; +extern const struct ad7606_chip_info ad7605_4_info; +extern const struct ad7606_chip_info ad7606_8_info; +extern const struct ad7606_chip_info ad7606_6_info; +extern const struct ad7606_chip_info ad7606_4_info; +extern const struct ad7606_chip_info ad7606b_info; +extern const struct ad7606_chip_info ad7606c_16_info; +extern const struct ad7606_chip_info ad7606c_18_info; +extern const struct ad7606_chip_info ad7607_info; +extern const struct ad7606_chip_info ad7608_info; +extern const struct ad7606_chip_info ad7609_info; +extern const struct ad7606_chip_info ad7616_info; #ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops ad7606_pm_ops; |