diff options
Diffstat (limited to 'drivers/extcon/extcon-fsa9480.c')
| -rw-r--r-- | drivers/extcon/extcon-fsa9480.c | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/drivers/extcon/extcon-fsa9480.c b/drivers/extcon/extcon-fsa9480.c new file mode 100644 index 000000000000..350fb34abfa0 --- /dev/null +++ b/drivers/extcon/extcon-fsa9480.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * extcon-fsa9480.c - Fairchild Semiconductor FSA9480 extcon driver + * + * Copyright (c) 2019 Tomasz Figa <tomasz.figa@gmail.com> + * + * Loosely based on old fsa9480 misc-device driver. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/kobject.h> +#include <linux/extcon-provider.h> +#include <linux/irqdomain.h> +#include <linux/regmap.h> + +/* FSA9480 I2C registers */ +#define FSA9480_REG_DEVID 0x01 +#define FSA9480_REG_CTRL 0x02 +#define FSA9480_REG_INT1 0x03 +#define FSA9480_REG_INT2 0x04 +#define FSA9480_REG_INT1_MASK 0x05 +#define FSA9480_REG_INT2_MASK 0x06 +#define FSA9480_REG_ADC 0x07 +#define FSA9480_REG_TIMING1 0x08 +#define FSA9480_REG_TIMING2 0x09 +#define FSA9480_REG_DEV_T1 0x0a +#define FSA9480_REG_DEV_T2 0x0b +#define FSA9480_REG_BTN1 0x0c +#define FSA9480_REG_BTN2 0x0d +#define FSA9480_REG_CK 0x0e +#define FSA9480_REG_CK_INT1 0x0f +#define FSA9480_REG_CK_INT2 0x10 +#define FSA9480_REG_CK_INTMASK1 0x11 +#define FSA9480_REG_CK_INTMASK2 0x12 +#define FSA9480_REG_MANSW1 0x13 +#define FSA9480_REG_MANSW2 0x14 +#define FSA9480_REG_END 0x15 + +/* Control */ +#define CON_SWITCH_OPEN (1 << 4) +#define CON_RAW_DATA (1 << 3) +#define CON_MANUAL_SW (1 << 2) +#define CON_WAIT (1 << 1) +#define CON_INT_MASK (1 << 0) +#define CON_MASK (CON_SWITCH_OPEN | CON_RAW_DATA | \ + CON_MANUAL_SW | CON_WAIT) + +/* Device Type 1 */ +#define DEV_USB_OTG 7 +#define DEV_DEDICATED_CHG 6 +#define DEV_USB_CHG 5 +#define DEV_CAR_KIT 4 +#define DEV_UART 3 +#define DEV_USB 2 +#define DEV_AUDIO_2 1 +#define DEV_AUDIO_1 0 + +#define DEV_T1_USB_MASK (DEV_USB_OTG | DEV_USB) +#define DEV_T1_UART_MASK (DEV_UART) +#define DEV_T1_CHARGER_MASK (DEV_DEDICATED_CHG | DEV_USB_CHG) + +/* Device Type 2 */ +#define DEV_AV 14 +#define DEV_TTY 13 +#define DEV_PPD 12 +#define DEV_JIG_UART_OFF 11 +#define DEV_JIG_UART_ON 10 +#define DEV_JIG_USB_OFF 9 +#define DEV_JIG_USB_ON 8 + +#define DEV_T2_USB_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON) +#define DEV_T2_UART_MASK (DEV_JIG_UART_OFF | DEV_JIG_UART_ON) +#define DEV_T2_JIG_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \ + DEV_JIG_UART_OFF | DEV_JIG_UART_ON) + +/* + * Manual Switch + * D- [7:5] / D+ [4:2] + * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO + */ +#define SW_VAUDIO ((4 << 5) | (4 << 2)) +#define SW_UART ((3 << 5) | (3 << 2)) +#define SW_AUDIO ((2 << 5) | (2 << 2)) +#define SW_DHOST ((1 << 5) | (1 << 2)) +#define SW_AUTO ((0 << 5) | (0 << 2)) + +/* Interrupt 1 */ +#define INT1_MASK (0xff << 0) +#define INT_DETACH (1 << 1) +#define INT_ATTACH (1 << 0) + +/* Interrupt 2 mask */ +#define INT2_MASK (0x1f << 0) + +/* Timing Set 1 */ +#define TIMING1_ADC_500MS (0x6 << 0) + +struct fsa9480_usbsw { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + u16 cable; +}; + +static const unsigned int fsa9480_extcon_cable[] = { + EXTCON_USB_HOST, + EXTCON_USB, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_ACA, + EXTCON_JACK_LINE_OUT, + EXTCON_JACK_VIDEO_OUT, + EXTCON_JIG, + + EXTCON_NONE, +}; + +static const u64 cable_types[] = { + [DEV_USB_OTG] = BIT_ULL(EXTCON_USB_HOST), + [DEV_DEDICATED_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_DCP), + [DEV_USB_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP), + [DEV_CAR_KIT] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP) + | BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_UART] = BIT_ULL(EXTCON_JIG), + [DEV_USB] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP), + [DEV_AUDIO_2] = BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_AUDIO_1] = BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_AV] = BIT_ULL(EXTCON_JACK_LINE_OUT) + | BIT_ULL(EXTCON_JACK_VIDEO_OUT), + [DEV_TTY] = BIT_ULL(EXTCON_JIG), + [DEV_PPD] = BIT_ULL(EXTCON_JACK_LINE_OUT) | BIT_ULL(EXTCON_CHG_USB_ACA), + [DEV_JIG_UART_OFF] = BIT_ULL(EXTCON_JIG), + [DEV_JIG_UART_ON] = BIT_ULL(EXTCON_JIG), + [DEV_JIG_USB_OFF] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG), + [DEV_JIG_USB_ON] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG), +}; + +/* Define regmap configuration of FSA9480 for I2C communication */ +static bool fsa9480_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case FSA9480_REG_INT1_MASK: + return true; + default: + break; + } + return false; +} + +static const struct regmap_config fsa9480_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = fsa9480_volatile_reg, + .max_register = FSA9480_REG_END, +}; + +static int fsa9480_write_reg(struct fsa9480_usbsw *usbsw, int reg, int value) +{ + int ret; + + ret = regmap_write(usbsw->regmap, reg, value); + if (ret < 0) + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static int fsa9480_read_reg(struct fsa9480_usbsw *usbsw, int reg) +{ + int ret, val; + + ret = regmap_read(usbsw->regmap, reg, &val); + if (ret < 0) { + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + return ret; + } + + return val; +} + +static int fsa9480_read_irq(struct fsa9480_usbsw *usbsw, int *value) +{ + u8 regs[2]; + int ret; + + ret = regmap_bulk_read(usbsw->regmap, FSA9480_REG_INT1, regs, 2); + if (ret < 0) + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + + *value = regs[1] << 8 | regs[0]; + return ret; +} + +static void fsa9480_handle_change(struct fsa9480_usbsw *usbsw, + u16 mask, bool attached) +{ + while (mask) { + int dev = fls64(mask) - 1; + u64 cables = cable_types[dev]; + + while (cables) { + int cable = fls64(cables) - 1; + + extcon_set_state_sync(usbsw->edev, cable, attached); + cables &= ~BIT_ULL(cable); + } + + mask &= ~BIT_ULL(dev); + } +} + +static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw) +{ + int val1, val2; + u16 val; + + val1 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T1); + val2 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T2); + if (val1 < 0 || val2 < 0) { + dev_err(usbsw->dev, "%s: failed to read registers", __func__); + return; + } + val = val2 << 8 | val1; + + dev_info(usbsw->dev, "dev1: 0x%x, dev2: 0x%x\n", val1, val2); + + /* handle detached cables first */ + fsa9480_handle_change(usbsw, usbsw->cable & ~val, false); + + /* then handle attached ones */ + fsa9480_handle_change(usbsw, val & ~usbsw->cable, true); + + usbsw->cable = val; +} + +static irqreturn_t fsa9480_irq_handler(int irq, void *data) +{ + struct fsa9480_usbsw *usbsw = data; + int intr = 0; + + /* clear interrupt */ + fsa9480_read_irq(usbsw, &intr); + if (!intr) + return IRQ_NONE; + + /* device detection */ + fsa9480_detect_dev(usbsw); + + return IRQ_HANDLED; +} + +static int fsa9480_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fsa9480_usbsw *info; + int ret; + + if (!client->irq) { + dev_err(&client->dev, "no interrupt provided\n"); + return -EINVAL; + } + + info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->dev = &client->dev; + + i2c_set_clientdata(client, info); + + /* External connector */ + info->edev = devm_extcon_dev_allocate(info->dev, + fsa9480_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(info->dev, "failed to allocate memory for extcon\n"); + ret = -ENOMEM; + return ret; + } + + ret = devm_extcon_dev_register(info->dev, info->edev); + if (ret) { + dev_err(info->dev, "failed to register extcon device\n"); + return ret; + } + + info->regmap = devm_regmap_init_i2c(client, &fsa9480_regmap_config); + if (IS_ERR(info->regmap)) { + ret = PTR_ERR(info->regmap); + dev_err(info->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } + + /* ADC Detect Time: 500ms */ + fsa9480_write_reg(info, FSA9480_REG_TIMING1, TIMING1_ADC_500MS); + + /* configure automatic switching */ + fsa9480_write_reg(info, FSA9480_REG_CTRL, CON_MASK); + + /* unmask interrupt (attach/detach only) */ + fsa9480_write_reg(info, FSA9480_REG_INT1_MASK, + INT1_MASK & ~(INT_ATTACH | INT_DETACH)); + fsa9480_write_reg(info, FSA9480_REG_INT2_MASK, INT2_MASK); + + ret = devm_request_threaded_irq(info->dev, client->irq, NULL, + fsa9480_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "fsa9480", info); + if (ret) { + dev_err(info->dev, "failed to request IRQ\n"); + return ret; + } + + device_init_wakeup(info->dev, true); + fsa9480_detect_dev(info); + + return 0; +} + +static int fsa9480_remove(struct i2c_client *client) +{ + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int fsa9480_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev) && client->irq) + enable_irq_wake(client->irq); + + return 0; +} + +static int fsa9480_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev) && client->irq) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static const struct dev_pm_ops fsa9480_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fsa9480_suspend, fsa9480_resume) +}; + +static const struct i2c_device_id fsa9480_id[] = { + { "fsa9480", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, fsa9480_id); + +static const struct of_device_id fsa9480_of_match[] = { + { .compatible = "fcs,fsa9480", }, + { }, +}; +MODULE_DEVICE_TABLE(of, fsa9480_of_match); + +static struct i2c_driver fsa9480_i2c_driver = { + .driver = { + .name = "fsa9480", + .pm = &fsa9480_pm_ops, + .of_match_table = fsa9480_of_match, + }, + .probe = fsa9480_probe, + .remove = fsa9480_remove, + .id_table = fsa9480_id, +}; + +static int __init fsa9480_module_init(void) +{ + return i2c_add_driver(&fsa9480_i2c_driver); +} +subsys_initcall(fsa9480_module_init); + +static void __exit fsa9480_module_exit(void) +{ + i2c_del_driver(&fsa9480_i2c_driver); +} +module_exit(fsa9480_module_exit); + +MODULE_DESCRIPTION("Fairchild Semiconductor FSA9480 extcon driver"); +MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); +MODULE_LICENSE("GPL"); |