summaryrefslogtreecommitdiff
path: root/arch/powerpc/mm/nohash/40x.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/mm/nohash/40x.c')
-rw-r--r--arch/powerpc/mm/nohash/40x.c161
1 files changed, 0 insertions, 161 deletions
diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c
deleted file mode 100644
index e835e80c09db..000000000000
--- a/arch/powerpc/mm/nohash/40x.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- * -- paulus
- *
- * Derived from arch/ppc/mm/init.c:
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- * and Cort Dougan (PReP) (cort@cs.nmt.edu)
- * Copyright (C) 1996 Paul Mackerras
- *
- * Derived from "arch/i386/mm/init.c"
- * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-#include <linux/memblock.h>
-
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/mmu.h>
-#include <linux/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include <mm/mmu_decl.h>
-
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
- int i;
- unsigned long zpr;
-
- /*
- * The Zone Protection Register (ZPR) defines how protection will
- * be applied to every page which is a member of a given zone.
- * The zone index bits (of ZSEL) in the PTE are used for software
- * indicators. We use the 4 upper bits of virtual address to select
- * the zone. We set all zones above TASK_SIZE to zero, allowing
- * only kernel access as indicated in the PTE. For zones below
- * TASK_SIZE, we set a 01 binary (a value of 10 will not work)
- * to allow user access as indicated in the PTE. This also allows
- * kernel access as indicated in the PTE.
- */
-
- for (i = 0, zpr = 0; i < TASK_SIZE >> 28; i++)
- zpr |= 1 << (30 - i * 2);
-
- mtspr(SPRN_ZPR, zpr);
-
- flush_instruction_cache();
-
- /*
- * Set up the real-mode cache parameters for the exception vector
- * handlers (which are run in real-mode).
- */
-
- mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
-
- /*
- * Cache instruction and data space where the exception
- * vectors and the kernel live in real-mode.
- */
-
- mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */
- mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M (1<<24)
-#define LARGE_PAGE_SIZE_4M (1<<22)
-
-unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
-{
- unsigned long v, s, mapped;
- phys_addr_t p;
-
- v = KERNELBASE;
- p = 0;
- s = total_lowmem;
-
- if (IS_ENABLED(CONFIG_KFENCE))
- return 0;
-
- if (debug_pagealloc_enabled())
- return 0;
-
- if (strict_kernel_rwx_enabled())
- return 0;
-
- while (s >= LARGE_PAGE_SIZE_16M) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW;
-
- pmdp = pmd_off_k(v);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
- *pmdp++ = __pmd(val);
-
- v += LARGE_PAGE_SIZE_16M;
- p += LARGE_PAGE_SIZE_16M;
- s -= LARGE_PAGE_SIZE_16M;
- }
-
- while (s >= LARGE_PAGE_SIZE_4M) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW;
-
- pmdp = pmd_off_k(v);
- *pmdp = __pmd(val);
-
- v += LARGE_PAGE_SIZE_4M;
- p += LARGE_PAGE_SIZE_4M;
- s -= LARGE_PAGE_SIZE_4M;
- }
-
- mapped = total_lowmem - s;
-
- /* If the size of RAM is not an exact power of two, we may not
- * have covered RAM in its entirety with 16 and 4 MiB
- * pages. Consequently, restrict the top end of RAM currently
- * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
- * coverage with normal-sized pages (or other reasons) do not
- * attempt to allocate outside the allowed range.
- */
- memblock_set_current_limit(mapped);
-
- return mapped;
-}
-
-void setup_initial_memory_limit(phys_addr_t first_memblock_base,
- phys_addr_t first_memblock_size)
-{
- /* We don't currently support the first MEMBLOCK not mapping 0
- * physical on those processors
- */
- BUG_ON(first_memblock_base != 0);
-
- /* 40x can only access 16MB at the moment (see head_40x.S) */
- memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
-}