diff options
Diffstat (limited to 'arch/mips/momentum/ocelot_g/setup.c')
| -rw-r--r-- | arch/mips/momentum/ocelot_g/setup.c | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c deleted file mode 100644 index 9db638a7982c..000000000000 --- a/arch/mips/momentum/ocelot_g/setup.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines - * - * Copyright (C) 1996, 1997, 2001 Ralf Baechle - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: Matthew Dharm, Momentum Computer - * mdharm@momenco.com - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/pm.h> -#include <linux/timex.h> -#include <linux/vmalloc.h> - -#include <asm/time.h> -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/gt64240.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <linux/bootmem.h> - -#include "ocelot_pld.h" - -#ifdef CONFIG_GALILEO_GT64240_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif - -unsigned long marvell_base; - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_ocelot_restart(char *command); -extern void momenco_ocelot_halt(void); -extern void momenco_ocelot_power_off(void); - -extern void gt64240_time_init(void); -extern void momenco_ocelot_irq_setup(void); - -static char reset_reason; - -static unsigned long ENTRYLO(unsigned long paddr) -{ - return ((paddr & PAGE_MASK) | - (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | - _CACHE_UNCACHED)) >> 6; -} - -/* setup code for a handoff from a version 2 PMON 2000 PROM */ -void PMON_v2_setup(void) -{ - /* A wired TLB entry for the GT64240 and the serial port. The - GT64240 is going to be hit on every IRQ anyway - there's - absolutely no point in letting it be a random TLB entry, as - it'll just cause needless churning of the TLB. And we use - the other half for the serial port, which is just a PITA - otherwise :) - - Device Physical Virtual - GT64240 Internal Regs 0xf4000000 0xe0000000 - UARTs (CS2) 0xfd000000 0xe0001000 - */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), - 0xf4000000, PM_64K); - add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000), - 0xfd000000, PM_4K); - - /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM - in the CS[012] region. We can't use ioremap() yet. The NVRAM - is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. - - Ocelot PLD (CS0) 0xfc000000 0xe0020000 - NVRAM (CS1) 0xfc800000 0xe0030000 - */ - add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000), - 0xfc000000, PM_64K); - add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000), - 0xfc800000, PM_64K); - - marvell_base = 0xf4000000; -} - -extern int rm7k_tcache_enabled; - -/* - * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() - */ -#define Page_Invalidate_T 0x16 -static void __init setup_l3cache(unsigned long size) -{ - int register i; - - printk("Enabling L3 cache..."); - - /* Enable the L3 cache in the GT64120A's CPU Configuration register */ - MV_WRITE(0, MV_READ(0) | (1<<14)); - - /* Enable the L3 cache in the CPU */ - set_c0_config(1<<12 /* CONF_TE */); - - /* Clear the cache */ - write_c0_taglo(0); - write_c0_taghi(0); - - for (i=0; i < size; i+= 4096) { - __asm__ __volatile__ ( - ".set noreorder\n\t" - ".set mips3\n\t" - "cache %1, (%0)\n\t" - ".set mips0\n\t" - ".set reorder" - : - : "r" (KSEG0ADDR(i)), - "i" (Page_Invalidate_T)); - } - - /* Let the RM7000 MM code know that the tertiary cache is enabled */ - rm7k_tcache_enabled = 1; - - printk("Done\n"); -} - -void __init plat_timer_setup(struct irqaction *irq) -{ -} - -void __init plat_mem_setup(void) -{ - void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); - unsigned int tmpword; - - board_time_init = gt64240_time_init; - - _machine_restart = momenco_ocelot_restart; - _machine_halt = momenco_ocelot_halt; - pm_power_off = momenco_ocelot_power_off; - - /* - * initrd_start = (unsigned long)ocelot_initrd_start; - * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size; - * initrd_below_start_ok = 1; - */ - - /* do handoff reconfiguration */ - PMON_v2_setup(); - -#ifdef CONFIG_GALILEO_GT64240_ETH - /* get the mac addr */ - memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); -#endif - - /* Turn off the Bit-Error LED */ - OCELOT_PLD_WRITE(0x80, INTCLR); - - tmpword = OCELOT_PLD_READ(BOARDREV); - if (tmpword < 26) - printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword); - else - printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword); - - tmpword = OCELOT_PLD_READ(PLD1_ID); - printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(PLD2_ID); - printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - reset_reason = tmpword; - OCELOT_PLD_WRITE(0xff, RESET_STATUS); - - tmpword = OCELOT_PLD_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); - printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); - printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); - - if (tmpword&12) - l3func((1<<(((tmpword&12) >> 2)+20))); - - switch(tmpword &3) { - case 3: - /* 512MiB -- two banks of 256MiB */ - add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM); -/* - add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); -*/ - break; - case 2: - /* 256MiB -- two banks of 128MiB */ - add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM); - add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); - break; - case 1: - /* 128MiB -- 64MiB per bank */ - add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); - add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); - break; - case 0: - /* 64MiB */ - add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); - break; - } - - /* FIXME: Fix up the DiskOnChip mapping */ - MV_WRITE(0x468, 0xfef73); -} - -/* This needs to be one of the first initcalls, because no I/O port access - can work before this */ - -static int io_base_ioremap(void) -{ - /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ - unsigned long io_remap_range; - - io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000); - if (!io_remap_range) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_remap_range - 0xc0000000); - - return 0; -} - -module_init(io_base_ioremap); |