diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 61 |
1 files changed, 50 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi index a5aceaa39670..de4048a3564b 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -42,9 +42,10 @@ device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + bootph-all; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; @@ -58,6 +59,18 @@ linux,cma-default; }; + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0xf00000>; + no-map; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; @@ -69,12 +82,6 @@ alignment = <0x1000>; no-map; }; - - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9c900000 0x00 0x01e00000>; - no-map; - }; }; vcc_5v0_som: regulator-vcc-5v0-som { @@ -99,6 +106,7 @@ AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ >; + bootph-all; }; main_mdio1_pins_default: main-mdio1-default-pins { @@ -106,6 +114,7 @@ AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; + bootph-all; }; main_mmc0_pins_default: main-mmc0-default-pins { @@ -121,6 +130,7 @@ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ >; + bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { @@ -138,6 +148,7 @@ AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ >; + bootph-all; }; ospi0_pins_default: ospi0-default-pins { @@ -155,6 +166,7 @@ AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */ >; + bootph-all; }; pmic_irq_pins_default: pmic-irq-default-pins { @@ -164,15 +176,29 @@ }; }; +&a53_opp_table { + /* Requires VDD_CORE at 0v85 */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; +}; + &cpsw3g { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>; + status = "okay"; }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; + bootph-all; +}; + +&cpsw_mac_syscon { + bootph-all; }; &cpsw3g_mdio { @@ -182,6 +208,7 @@ cpsw3g_phy1: ethernet-phy@1 { compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; reg = <1>; + bootph-all; ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; @@ -196,6 +223,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + bootph-all; status = "okay"; pmic@30 { @@ -215,8 +243,8 @@ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; - ti,power-button; system-power-controller; + ti,power-button; regulators { vdd_3v3: buck1 { @@ -302,6 +330,10 @@ status = "okay"; }; +&main_pktdma { + bootph-all; +}; + &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; @@ -318,13 +350,20 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + bootph-all; }; }; +&phy_gmii_sel { + bootph-all; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; non-removable; + bootph-all; status = "okay"; }; + +#include "k3-am62a-ti-ipc-firmware.dtsi" |