diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/monaco-evk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/monaco-evk.dts | 925 |
1 files changed, 925 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts new file mode 100644 index 000000000000..9d17ef7d2caf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -0,0 +1,925 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Monaco EVK"; + compatible = "qcom,monaco-evk", "qcom,qcs8300"; + + aliases { + ethernet0 = ðernet0; + i2c1 = &i2c1; + serial0 = &uart7; + serial2 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector-2 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb2_vbus>; + + pinctrl-0 = <&usb2_id>; + pinctrl-names = "default"; + + port { + usb2_con_hs_ep: endpoint { + remote-endpoint = <&usb_2_dwc3_hs>; + }; + }; + }; + + dmic: audio-codec-0 { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + num-channels = <1>; + }; + + max98357a: audio-codec-1 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + }; + + dp-connector-0 { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <<8713sx_dp0_out>; + }; + }; + }; + + dp-connector-1 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <<8713sx_dp1_out>; + }; + }; + }; + + usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "qcom,qcs8275-sndcard"; + model = "MONACO-EVK"; + + pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>; + pinctrl-names = "default"; + + hs0-mi2s-playback-dai-link { + link-name = "HS0 MI2S Playback"; + + codec { + sound-dai = <&max98357a>; + }; + + cpu { + sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + sec-mi2s-capture-dai-link { + link-name = "Secondary MI2S Capture"; + + codec { + sound-dai = <&dmic>; + }; + + cpu { + sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_cam0_2p8: vreg-cam0-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam0_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam1_2p8: vreg-cam1-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam1_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam2_2p8: vreg-cam2-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam2_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam2_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + /* This comes from a PMIC handled within the SAIL domain */ + vreg_s2s: vreg-s2s { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2s"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s5c: smps5 { + regulator-name = "vreg_s5c"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <512000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + phy-mode = "2500base-x"; + phy-handle = <&hsgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy0: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs8300/a623_zap.mbn"; +}; + +&i2c0 { + status = "okay"; + + bridge@4f { + compatible = "lontium,lt8713sx"; + reg = <0x4f>; + reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt8713sx_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8713sx_dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; + + port@2 { + reg = <2>; + + lt8713sx_dp1_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_addr0: mac-addr@0 { + reg = <0x0 0x6>; + }; + }; + }; +}; + +&i2c15 { + pinctrl-0 = <&qup_i2c15_default>; + pinctrl-names = "default"; + + status = "okay"; + + expander0: gpio@38 { + compatible = "ti,tca9538"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander0_int>; + pinctrl-names = "default"; + }; + + expander1: gpio@39 { + compatible = "ti,tca9538"; + reg = <0x39>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander1_int>; + pinctrl-names = "default"; + }; + + expander2: gpio@3a { + compatible = "ti,tca9538"; + reg = <0x3a>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander2_int>; + pinctrl-names = "default"; + }; + + expander3: gpio@3b { + compatible = "ti,tca9538"; + reg = <0x3b>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander3_int>; + pinctrl-names = "default"; + }; + + expander4: gpio@3c { + compatible = "ti,tca9538"; + reg = <0x3c>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander4_int>; + pinctrl-names = "default"; + }; + + expander5: gpio@3d { + compatible = "ti,tca9538"; + reg = <0x3d>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander5_int>; + pinctrl-names = "default"; + }; + + expander6: gpio@3e { + compatible = "ti,tca9538"; + reg = <0x3e>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander6_int>; + pinctrl-names = "default"; + }; +}; + +&iris { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <<8713sx_dp_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; +}; + +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; +}; + +&pmm8620au_0_gpios { + usb2_id: usb2-id-state { + pins = "gpio9"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + +&qup_i2c0_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8300/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8300/cdsp0.mbn"; + + status = "okay"; +}; + +&remoteproc_gpdsp { + firmware-name = "qcom/qcs8300/gpdsp0.mbn"; + + status = "okay"; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l8a>; + vqmmc-supply = <&vreg_s2s>; + + no-sd; + no-sdio; + non-removable; + + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&spi10 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&tlmm { + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio5"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio6"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + expander5_int: expander5-int-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + expander1_int: expander1-int-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-state { + pins = "gpio19", "gpio20"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + expander3_int: expander3-int-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-up; + }; + + expander6_int: expander6-int-state { + pins = "gpio52"; + function = "gpio"; + bias-pull-up; + }; + + expander0_int: expander0-int-state { + pins = "gpio56"; + function = "gpio"; + bias-pull-up; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-state { + pins = "gpio91", "gpio92"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + expander2_int: expander2-int-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + }; + + expander4_int: expander4-int-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3_hs { + remote-endpoint = <&usb2_con_hs_ep>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; |