diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp')
318 files changed, 5954 insertions, 4284 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 39a153536d2a..856c9f21bd70 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -58,6 +58,31 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-voipac-bsb.dtb imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo + +imx6qdl-dhcom-pdk2-overlay-497-200-x12-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtbo + +imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtbo + +imx6qdl-dhcom-pdk2-overlay-531-100-x21-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtbo + +imx6qdl-dhcom-pdk2-overlay-531-100-x22-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtbo + +imx6qdl-dhcom-pdk2-overlay-560-200-x12-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtbo + +imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh-dtbs := \ + imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtbo + dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-alti6p.dtb \ imx6dl-apf6dev.dtb \ @@ -69,6 +94,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-colibri-eval-v3.dtb \ imx6dl-colibri-iris.dtb \ imx6dl-colibri-iris-v2.dtb \ + imx6dl-colibri-v1.2-aster.dtb \ + imx6dl-colibri-v1.2-eval-v3.dtb \ + imx6dl-colibri-v1.2-iris.dtb \ + imx6dl-colibri-v1.2-iris-v2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -158,6 +187,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ imx6q-apalis-ixora-v1.2.dtb \ + imx6q-apalis-v1.2-eval.dtb \ + imx6q-apalis-v1.2-eval-v1.2.dtb \ + imx6q-apalis-v1.2-ixora.dtb \ + imx6q-apalis-v1.2-ixora-v1.1.dtb \ + imx6q-apalis-v1.2-ixora-v1.2.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-b450v3.dtb \ @@ -170,6 +204,18 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-cubox-i-som-v15.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dhcom-pdk2.dtb \ + imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtb \ + imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtbo \ + imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtb \ + imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtbo \ + imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtb \ + imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtbo \ + imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtb \ + imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtbo \ + imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtb \ + imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtbo \ + imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtb \ + imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtbo \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-dms-ba16.dtb \ @@ -329,6 +375,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ + imx6ul-var-som-concerto.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-aster.dtb \ imx6ull-colibri-emmc-aster.dtb \ @@ -346,6 +393,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-dhcom-pdk2.dtb \ imx6ull-dhcom-picoitx.dtb \ imx6ull-dhcor-maveo-box.dtb \ + imx6ull-engicam-microgea-bmm.dtb \ + imx6ull-engicam-microgea-gtw.dtb \ + imx6ull-engicam-microgea-rmm.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi index 0029c12f16c8..aac7b9ef7627 100644 --- a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi @@ -23,6 +23,14 @@ stdout-path = &uart1; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; @@ -119,8 +127,33 @@ vdd-supply = <&ldo5_reg>; }; - /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + tps65185: pmic@68 { + compatible = "ti,tps65185"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + vin-supply = <&epd_pmic_supply>; + pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vcom-ctrl-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + + regulators { + vcom_reg: vcom { + regulator-name = "vcom"; + }; + + vposneg_reg: vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + }; + v3p3_reg: v3p3 { + regulator-name = "v3p3"; + }; + }; + }; }; &i2c3 { diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi index dcc3c9d488a8..3bb11c5a6353 100644 --- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi @@ -69,6 +69,14 @@ reg = <0x80000000 0x20000000>; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; regulator-name = "SD3_SPWR"; @@ -133,7 +141,22 @@ vdd-supply = <&ldo5_reg>; }; - /* TODO: SY7636 PMIC for E Ink at 0x62 */ + sy7636: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + vcom-en-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + epd-pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vin-supply = <&epd_pmic_supply>; + + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts index 2c817c4a4c68..823e7c42910b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts +++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts @@ -76,60 +76,58 @@ }; &iomuxc { - imx1-ads { - pinctrl_cspi1: cspi1grp { - fsl,pins = < - MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 - MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 - MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 - MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 - MX1_PAD_SPI1_SS__GPIO3_15 0x0 - >; - }; - - pinctrl_i2c: i2cgrp { - fsl,pins = < - MX1_PAD_I2C_SCL__I2C_SCL 0x0 - MX1_PAD_I2C_SDA__I2C_SDA 0x0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX1_PAD_UART1_TXD__UART1_TXD 0x0 - MX1_PAD_UART1_RXD__UART1_RXD 0x0 - MX1_PAD_UART1_CTS__UART1_CTS 0x0 - MX1_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX1_PAD_UART2_TXD__UART2_TXD 0x0 - MX1_PAD_UART2_RXD__UART2_RXD 0x0 - MX1_PAD_UART2_CTS__UART2_CTS 0x0 - MX1_PAD_UART2_RTS__UART2_RTS 0x0 - >; - }; - - pinctrl_weim: weimgrp { - fsl,pins = < - MX1_PAD_A0__A0 0x0 - MX1_PAD_A16__A16 0x0 - MX1_PAD_A17__A17 0x0 - MX1_PAD_A18__A18 0x0 - MX1_PAD_A19__A19 0x0 - MX1_PAD_A20__A20 0x0 - MX1_PAD_A21__A21 0x0 - MX1_PAD_A22__A22 0x0 - MX1_PAD_A23__A23 0x0 - MX1_PAD_A24__A24 0x0 - MX1_PAD_BCLK__BCLK 0x0 - MX1_PAD_CS4__CS4 0x0 - MX1_PAD_DTACK__DTACK 0x0 - MX1_PAD_ECB__ECB 0x0 - MX1_PAD_LBA__LBA 0x0 - >; - }; + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 + MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 + MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 + MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 + MX1_PAD_SPI1_SS__GPIO3_15 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts index 058e9435524f..794e5bfee367 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts +++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts @@ -67,56 +67,54 @@ }; &iomuxc { - imx1-apf9328 { - pinctrl_eth: ethgrp { - fsl,pins = < - MX1_PAD_SIM_SVEN__GPIO2_14 0x0 - >; - }; + pinctrl_eth: ethgrp { + fsl,pins = < + MX1_PAD_SIM_SVEN__GPIO2_14 0x0 + >; + }; - pinctrl_i2c: i2cgrp { - fsl,pins = < - MX1_PAD_I2C_SCL__I2C_SCL 0x0 - MX1_PAD_I2C_SDA__I2C_SDA 0x0 - >; - }; + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX1_PAD_UART1_TXD__UART1_TXD 0x0 - MX1_PAD_UART1_RXD__UART1_RXD 0x0 - MX1_PAD_UART1_CTS__UART1_CTS 0x0 - MX1_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX1_PAD_UART2_TXD__UART2_TXD 0x0 - MX1_PAD_UART2_RXD__UART2_RXD 0x0 - MX1_PAD_UART2_CTS__UART2_CTS 0x0 - MX1_PAD_UART2_RTS__UART2_RTS 0x0 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; - pinctrl_weim: weimgrp { - fsl,pins = < - MX1_PAD_A0__A0 0x0 - MX1_PAD_A16__A16 0x0 - MX1_PAD_A17__A17 0x0 - MX1_PAD_A18__A18 0x0 - MX1_PAD_A19__A19 0x0 - MX1_PAD_A20__A20 0x0 - MX1_PAD_A21__A21 0x0 - MX1_PAD_A22__A22 0x0 - MX1_PAD_A23__A23 0x0 - MX1_PAD_A24__A24 0x0 - MX1_PAD_BCLK__BCLK 0x0 - MX1_PAD_CS4__CS4 0x0 - MX1_PAD_DTACK__DTACK 0x0 - MX1_PAD_ECB__ECB 0x0 - MX1_PAD_LBA__LBA 0x0 - >; - }; + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index a1a89ccacf05..ed04a907b3f7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -202,7 +202,7 @@ #clock-cells = <1>; }; - iomuxc: iomuxc@21c000 { + iomuxc: pinmux@21c000 { compatible = "fsl,imx1-iomuxc"; reg = <0x0021c000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi index 93a6e4e680b4..31dc2a640362 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi @@ -34,27 +34,25 @@ }; &iomuxc { - imx25-eukrea-cpuimx25 { - pinctrl_fec: fecgrp { - fsl,pins = < - MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 - MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 - MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 - MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 - MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 - MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 - MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index 6cddb2cc36fe..e08fcbfef4d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -43,10 +43,8 @@ }; &iomuxc { - imx25-eukrea-mbimxsd25-baseboard-cmo-qvga { - pinctrl_reg_lcd_3v3: reg_lcd_3v3 { - fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>; - }; + pinctrl_reg_lcd_3v3: reg_lcd_3v3grp { + fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts index c7207ea437c4..cf127e00793e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts @@ -68,80 +68,78 @@ }; &iomuxc { - imx25-eukrea-mbimxsd25-baseboard { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0 - MX25_PAD_KPP_COL2__AUD5_TXC 0xe0 - MX25_PAD_KPP_COL1__AUD5_RXD 0xe0 - MX25_PAD_KPP_COL0__AUD5_TXD 0xe0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0 + MX25_PAD_KPP_COL2__AUD5_TXC 0xe0 + MX25_PAD_KPP_COL1__AUD5_RXD 0xe0 + MX25_PAD_KPP_COL0__AUD5_TXD 0xe0 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0 - MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0 - MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0 - MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0 - MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0 - MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0 + MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0 + MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0 + MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0 + MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0 + MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0 + >; + }; - pinctrl_gpiokeys: gpiokeysgrp { - fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>; - }; + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>; + }; - pinctrl_gpioled: gpioledgrp { - fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>; - }; + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>; + }; - pinctrl_lcdc: lcdcgrp { - fsl,pins = < - MX25_PAD_LD0__LD0 0x1 - MX25_PAD_LD1__LD1 0x1 - MX25_PAD_LD2__LD2 0x1 - MX25_PAD_LD3__LD3 0x1 - MX25_PAD_LD4__LD4 0x1 - MX25_PAD_LD5__LD5 0x1 - MX25_PAD_LD6__LD6 0x1 - MX25_PAD_LD7__LD7 0x1 - MX25_PAD_LD8__LD8 0x1 - MX25_PAD_LD9__LD9 0x1 - MX25_PAD_LD10__LD10 0x1 - MX25_PAD_LD11__LD11 0x1 - MX25_PAD_LD12__LD12 0x1 - MX25_PAD_LD13__LD13 0x1 - MX25_PAD_LD14__LD14 0x1 - MX25_PAD_LD15__LD15 0x1 - MX25_PAD_GPIO_E__LD16 0x1 - MX25_PAD_GPIO_F__LD17 0x1 - MX25_PAD_HSYNC__HSYNC 0x80000000 - MX25_PAD_VSYNC__VSYNC 0x80000000 - MX25_PAD_LSCLK__LSCLK 0x80000000 - MX25_PAD_OE_ACD__OE_ACD 0x80000000 - MX25_PAD_CONTRAST__CONTRAST 0x80000000 - >; - }; + pinctrl_lcdc: lcdcgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0x1 + MX25_PAD_LD1__LD1 0x1 + MX25_PAD_LD2__LD2 0x1 + MX25_PAD_LD3__LD3 0x1 + MX25_PAD_LD4__LD4 0x1 + MX25_PAD_LD5__LD5 0x1 + MX25_PAD_LD6__LD6 0x1 + MX25_PAD_LD7__LD7 0x1 + MX25_PAD_LD8__LD8 0x1 + MX25_PAD_LD9__LD9 0x1 + MX25_PAD_LD10__LD10 0x1 + MX25_PAD_LD11__LD11 0x1 + MX25_PAD_LD12__LD12 0x1 + MX25_PAD_LD13__LD13 0x1 + MX25_PAD_LD14__LD14 0x1 + MX25_PAD_LD15__LD15 0x1 + MX25_PAD_GPIO_E__LD16 0x1 + MX25_PAD_GPIO_F__LD17 0x1 + MX25_PAD_HSYNC__HSYNC 0x80000000 + MX25_PAD_VSYNC__VSYNC 0x80000000 + MX25_PAD_LSCLK__LSCLK 0x80000000 + MX25_PAD_OE_ACD__OE_ACD 0x80000000 + MX25_PAD_CONTRAST__CONTRAST 0x80000000 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX25_PAD_UART1_RTS__UART1_RTS 0xe0 - MX25_PAD_UART1_CTS__UART1_CTS 0xe0 - MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 - MX25_PAD_UART1_RXD__UART1_RXD 0xc0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX25_PAD_UART2_RXD__UART2_RXD 0x80000000 - MX25_PAD_UART2_TXD__UART2_TXD 0x80000000 - MX25_PAD_UART2_RTS__UART2_RTS 0x80000000 - MX25_PAD_UART2_CTS__UART2_CTS 0x80000000 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX25_PAD_UART2_RXD__UART2_RXD 0x80000000 + MX25_PAD_UART2_TXD__UART2_TXD 0x80000000 + MX25_PAD_UART2_RTS__UART2_RTS 0x80000000 + MX25_PAD_UART2_CTS__UART2_CTS 0x80000000 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts index dd176fb54e58..a35778ba6ffa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts @@ -130,109 +130,107 @@ }; &iomuxc { - imx25-pdk { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX25_PAD_RW__AUD4_TXFS 0xe0 - MX25_PAD_OE__AUD4_TXC 0xe0 - MX25_PAD_EB0__AUD4_TXD 0xe0 - MX25_PAD_EB1__AUD4_RXD 0xe0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_RW__AUD4_TXFS 0xe0 + MX25_PAD_OE__AUD4_TXC 0xe0 + MX25_PAD_EB0__AUD4_TXD 0xe0 + MX25_PAD_EB1__AUD4_RXD 0xe0 + >; + }; - pinctrl_can1: can1grp { - fsl,pins = < - MX25_PAD_GPIO_A__CAN1_TX 0x0 - MX25_PAD_GPIO_B__CAN1_RX 0x0 - MX25_PAD_D14__GPIO_4_6 0x80000000 - >; - }; + pinctrl_can1: can1grp { + fsl,pins = < + MX25_PAD_GPIO_A__CAN1_TX 0x0 + MX25_PAD_GPIO_B__CAN1_RX 0x0 + MX25_PAD_D14__GPIO_4_6 0x80000000 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 - MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 - MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 - MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 - MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 - MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 - MX25_PAD_A14__GPIO_2_0 0x80000000 - MX25_PAD_A15__GPIO_2_1 0x80000000 - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + MX25_PAD_A14__GPIO_2_0 0x80000000 + MX25_PAD_A15__GPIO_2_1 0x80000000 + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 - MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 - MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 - MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 - MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 - MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 - MX25_PAD_A17__GPIO_2_3 0x80000000 - MX25_PAD_D12__GPIO_4_8 0x80000000 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + MX25_PAD_A17__GPIO_2_3 0x80000000 + MX25_PAD_D12__GPIO_4_8 0x80000000 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 - MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; - pinctrl_kpp: kppgrp { - fsl,pins = < - MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 - MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 - MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 - MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 - MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 - MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 - MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 - MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 - >; - }; + pinctrl_kpp: kppgrp { + fsl,pins = < + MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 + MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 + MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 + MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 + MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 + MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 + MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 + MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 + >; + }; - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX25_PAD_LD0__LD0 0xe0 - MX25_PAD_LD1__LD1 0xe0 - MX25_PAD_LD2__LD2 0xe0 - MX25_PAD_LD3__LD3 0xe0 - MX25_PAD_LD4__LD4 0xe0 - MX25_PAD_LD5__LD5 0xe0 - MX25_PAD_LD6__LD6 0xe0 - MX25_PAD_LD7__LD7 0xe0 - MX25_PAD_LD8__LD8 0xe0 - MX25_PAD_LD9__LD9 0xe0 - MX25_PAD_LD10__LD10 0xe0 - MX25_PAD_LD11__LD11 0xe0 - MX25_PAD_LD12__LD12 0xe0 - MX25_PAD_LD13__LD13 0xe0 - MX25_PAD_LD14__LD14 0xe0 - MX25_PAD_LD15__LD15 0xe0 - MX25_PAD_GPIO_E__LD16 0xe0 - MX25_PAD_GPIO_F__LD17 0xe0 - MX25_PAD_HSYNC__HSYNC 0xe0 - MX25_PAD_VSYNC__VSYNC 0xe0 - MX25_PAD_LSCLK__LSCLK 0xe0 - MX25_PAD_OE_ACD__OE_ACD 0xe0 - MX25_PAD_CONTRAST__CONTRAST 0xe0 - >; - }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0xe0 + MX25_PAD_LD1__LD1 0xe0 + MX25_PAD_LD2__LD2 0xe0 + MX25_PAD_LD3__LD3 0xe0 + MX25_PAD_LD4__LD4 0xe0 + MX25_PAD_LD5__LD5 0xe0 + MX25_PAD_LD6__LD6 0xe0 + MX25_PAD_LD7__LD7 0xe0 + MX25_PAD_LD8__LD8 0xe0 + MX25_PAD_LD9__LD9 0xe0 + MX25_PAD_LD10__LD10 0xe0 + MX25_PAD_LD11__LD11 0xe0 + MX25_PAD_LD12__LD12 0xe0 + MX25_PAD_LD13__LD13 0xe0 + MX25_PAD_LD14__LD14 0xe0 + MX25_PAD_LD15__LD15 0xe0 + MX25_PAD_GPIO_E__LD16 0xe0 + MX25_PAD_GPIO_F__LD17 0xe0 + MX25_PAD_HSYNC__HSYNC 0xe0 + MX25_PAD_VSYNC__VSYNC 0xe0 + MX25_PAD_LSCLK__LSCLK 0xe0 + MX25_PAD_OE_ACD__OE_ACD 0xe0 + MX25_PAD_CONTRAST__CONTRAST 0xe0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX25_PAD_UART1_RTS__UART1_RTS 0xe0 - MX25_PAD_UART1_CTS__UART1_CTS 0xe0 - MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 - MX25_PAD_UART1_RXD__UART1_RXD 0xc0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi index 9cfff2151b7e..94dbcef63b8c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi @@ -195,7 +195,7 @@ status = "disabled"; }; - iomuxc: iomuxc@43fac000 { + iomuxc: pinmux@43fac000 { compatible = "fsl,imx25-iomuxc"; reg = <0x43fac000 0x4000>; }; @@ -305,7 +305,7 @@ status = "disabled"; }; - tsc: tcq@50030400 { + tsc: touchscreen@50030400 { compatible = "fsl,imx25-tcq"; reg = <0x50030400 0x60>; interrupt-parent = <&tscadc>; @@ -611,7 +611,7 @@ reg = <0x80000000 0x3b002000>; ranges; - nfc: nand@bb000000 { + nfc: nand-controller@bb000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts index 745d5d409952..b67bb21af3de 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts @@ -24,36 +24,34 @@ }; &iomuxc { - imx27-apf27 { - pinctrl_fec1: fec1grp { - fsl,pins = < - MX27_PAD_SD3_CMD__FEC_TXD0 0x0 - MX27_PAD_SD3_CLK__FEC_TXD1 0x0 - MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 - MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 - MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 - MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 - MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 - MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 - MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 - MX27_PAD_ATA_DATA7__FEC_MDC 0x0 - MX27_PAD_ATA_DATA8__FEC_CRS 0x0 - MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 - MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 - MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 - MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 - MX27_PAD_ATA_DATA13__FEC_COL 0x0 - MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 - MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts index 849306cb4532..dba97912cfd7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts @@ -122,116 +122,114 @@ }; &iomuxc { - imx27-apf27dev { - pinctrl_cspi1: cspi1grp { - fsl,pins = < - MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 - MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 - MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 - >; - }; + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 + MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 + MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 + >; + }; - pinctrl_cspi1_cs: cspi1csgrp { - fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>; - }; + pinctrl_cspi1_cs: cspi1csgrp { + fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>; + }; - pinctrl_cspi2: cspi2grp { - fsl,pins = < - MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 - MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 - MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 - >; - }; + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + >; + }; - pinctrl_cspi2_cs: cspi2csgrp { - fsl,pins = < - MX27_PAD_CSI_D5__GPIO2_17 0x0 - MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 - MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 - >; - }; + pinctrl_cspi2_cs: cspi2csgrp { + fsl,pins = < + MX27_PAD_CSI_D5__GPIO2_17 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>; + }; - pinctrl_imxfb1: imxfbgrp { - fsl,pins = < - MX27_PAD_CLS__CLS 0x0 - MX27_PAD_CONTRAST__CONTRAST 0x0 - MX27_PAD_LD0__LD0 0x0 - MX27_PAD_LD1__LD1 0x0 - MX27_PAD_LD2__LD2 0x0 - MX27_PAD_LD3__LD3 0x0 - MX27_PAD_LD4__LD4 0x0 - MX27_PAD_LD5__LD5 0x0 - MX27_PAD_LD6__LD6 0x0 - MX27_PAD_LD7__LD7 0x0 - MX27_PAD_LD8__LD8 0x0 - MX27_PAD_LD9__LD9 0x0 - MX27_PAD_LD10__LD10 0x0 - MX27_PAD_LD11__LD11 0x0 - MX27_PAD_LD12__LD12 0x0 - MX27_PAD_LD13__LD13 0x0 - MX27_PAD_LD14__LD14 0x0 - MX27_PAD_LD15__LD15 0x0 - MX27_PAD_LD16__LD16 0x0 - MX27_PAD_LD17__LD17 0x0 - MX27_PAD_LSCLK__LSCLK 0x0 - MX27_PAD_OE_ACD__OE_ACD 0x0 - MX27_PAD_PS__PS 0x0 - MX27_PAD_REV__REV 0x0 - MX27_PAD_SPL_SPR__SPL_SPR 0x0 - MX27_PAD_HSYNC__HSYNC 0x0 - MX27_PAD_VSYNC__VSYNC 0x0 - >; - }; + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX27_PAD_I2C_DATA__I2C_DATA 0x0 - MX27_PAD_I2C_CLK__I2C_CLK 0x0 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 + MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + >; + }; - pinctrl_max1027: max1027 { - fsl,pins = < - MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ - MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ - >; - }; + pinctrl_max1027: max1027grp { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; - pinctrl_pwm: pwmgrp { - fsl,pins = < - MX27_PAD_PWMO__PWMO 0x0 - >; - }; + pinctrl_pwm: pwmgrp { + fsl,pins = < + MX27_PAD_PWMO__PWMO 0x0 + >; + }; - pinctrl_sdhc2: sdhc2grp { - fsl,pins = < - MX27_PAD_SD2_CLK__SD2_CLK 0x0 - MX27_PAD_SD2_CMD__SD2_CMD 0x0 - MX27_PAD_SD2_D0__SD2_D0 0x0 - MX27_PAD_SD2_D1__SD2_D1 0x0 - MX27_PAD_SD2_D2__SD2_D2 0x0 - MX27_PAD_SD2_D3__SD2_D3 0x0 - >; - }; + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + >; + }; - pinctrl_sdhc2_cd: sdhc2cdgrp { - fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>; - }; + pinctrl_sdhc2_cd: sdhc2cdgrp { + fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi index c7e923584878..46acd0dfc589 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi @@ -100,52 +100,52 @@ fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>; }; - uart8250@3,200000 { + serial@3,200000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart8250_1>; compatible = "ns8250"; clocks = <&clk14745600>; fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; - interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>; reg = <3 0x200000 0x1000>; reg-shift = <1>; reg-io-width = <1>; no-loopback-test; }; - uart8250@3,400000 { + serial@3,400000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart8250_2>; compatible = "ns8250"; clocks = <&clk14745600>; fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; - interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>; reg = <3 0x400000 0x1000>; reg-shift = <1>; reg-io-width = <1>; no-loopback-test; }; - uart8250@3,800000 { + serial@3,800000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart8250_3>; compatible = "ns8250"; clocks = <&clk14745600>; fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; - interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>; reg = <3 0x800000 0x1000>; reg-shift = <1>; reg-io-width = <1>; no-loopback-test; }; - uart8250@3,1000000 { + serial@3,1000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart8250_4>; compatible = "ns8250"; clocks = <&clk14745600>; fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; - interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>; reg = <3 0x1000000 0x1000>; reg-shift = <1>; reg-io-width = <1>; @@ -154,131 +154,129 @@ }; &iomuxc { - imx27-eukrea-cpuimx27 { - pinctrl_fec: fecgrp { - fsl,pins = < - MX27_PAD_SD3_CMD__FEC_TXD0 0x0 - MX27_PAD_SD3_CLK__FEC_TXD1 0x0 - MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 - MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 - MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 - MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 - MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 - MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 - MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 - MX27_PAD_ATA_DATA7__FEC_MDC 0x0 - MX27_PAD_ATA_DATA8__FEC_CRS 0x0 - MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 - MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 - MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 - MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 - MX27_PAD_ATA_DATA13__FEC_COL 0x0 - MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 - MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX27_PAD_I2C_DATA__I2C_DATA 0x0 - MX27_PAD_I2C_CLK__I2C_CLK 0x0 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - MX27_PAD_NFRB__NFRB 0x0 - MX27_PAD_NFCLE__NFCLE 0x0 - MX27_PAD_NFWP_B__NFWP_B 0x0 - MX27_PAD_NFCE_B__NFCE_B 0x0 - MX27_PAD_NFALE__NFALE 0x0 - MX27_PAD_NFRE_B__NFRE_B 0x0 - MX27_PAD_NFWE_B__NFWE_B 0x0 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; - pinctrl_owire: owiregrp { - fsl,pins = < - MX27_PAD_RTCK__OWIRE 0x0 - >; - }; + pinctrl_owire: owiregrp { + fsl,pins = < + MX27_PAD_RTCK__OWIRE 0x0 + >; + }; - pinctrl_sdhc2: sdhc2grp { - fsl,pins = < - MX27_PAD_SD2_CLK__SD2_CLK 0x0 - MX27_PAD_SD2_CMD__SD2_CMD 0x0 - MX27_PAD_SD2_D0__SD2_D0 0x0 - MX27_PAD_SD2_D1__SD2_D1 0x0 - MX27_PAD_SD2_D2__SD2_D2 0x0 - MX27_PAD_SD2_D3__SD2_D3 0x0 - >; - }; + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX27_PAD_USBH1_TXDM__UART4_TXD 0x0 - MX27_PAD_USBH1_RXDP__UART4_RXD 0x0 - MX27_PAD_USBH1_TXDP__UART4_CTS 0x0 - MX27_PAD_USBH1_FS__UART4_RTS 0x0 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX27_PAD_USBH1_TXDM__UART4_TXD 0x0 + MX27_PAD_USBH1_RXDP__UART4_RXD 0x0 + MX27_PAD_USBH1_TXDP__UART4_CTS 0x0 + MX27_PAD_USBH1_FS__UART4_RTS 0x0 + >; + }; - pinctrl_uart8250_1: uart82501grp { - fsl,pins = < - MX27_PAD_USB_PWR__GPIO2_23 0x0 - >; - }; + pinctrl_uart8250_1: uart82501grp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 + >; + }; - pinctrl_uart8250_2: uart82502grp { - fsl,pins = < - MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 - >; - }; + pinctrl_uart8250_2: uart82502grp { + fsl,pins = < + MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 + >; + }; - pinctrl_uart8250_3: uart82503grp { - fsl,pins = < - MX27_PAD_USBH1_OE_B__GPIO2_27 0x0 - >; - }; + pinctrl_uart8250_3: uart82503grp { + fsl,pins = < + MX27_PAD_USBH1_OE_B__GPIO2_27 0x0 + >; + }; - pinctrl_uart8250_4: uart82504grp { - fsl,pins = < - MX27_PAD_USBH1_RXDM__GPIO2_30 0x0 - >; - }; + pinctrl_uart8250_4: uart82504grp { + fsl,pins = < + MX27_PAD_USBH1_RXDM__GPIO2_30 0x0 + >; + }; - pinctrl_usbh2: usbh2grp { - fsl,pins = < - MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 - MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 - MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 - MX27_PAD_USBH2_STP__USBH2_STP 0x0 - MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 - MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 - MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 - MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 - MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 - MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 - MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 - MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 - >; - }; + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 - MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 - MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 - MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 - MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 - MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 - MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 - MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 - MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 - MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 - MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 - MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts index d78793601306..26833ed3339e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts @@ -76,7 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touch>; reg = <0>; - interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; spi-cpol; spi-max-frequency = <1500000>; ti,keep-vref-on; @@ -147,113 +147,111 @@ }; &iomuxc { - imx27-eukrea-cpuimx27-baseboard { - pinctrl_cspi1: cspi1grp { - fsl,pins = < - MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 - MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 - MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 - MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ - >; - }; + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 + MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 + MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 + MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ + >; + }; - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX27_PAD_PWMO__GPIO5_5 0x0 - >; - }; + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX27_PAD_PWMO__GPIO5_5 0x0 + >; + }; - pinctrl_gpioleds: gpioledsgrp { - fsl,pins = < - MX27_PAD_PC_PWRON__GPIO6_16 0x0 - MX27_PAD_PC_CD2_B__GPIO6_19 0x0 - >; - }; + pinctrl_gpioleds: gpioledsgrp { + fsl,pins = < + MX27_PAD_PC_PWRON__GPIO6_16 0x0 + MX27_PAD_PC_CD2_B__GPIO6_19 0x0 + >; + }; - pinctrl_imxfb: imxfbgrp { - fsl,pins = < - MX27_PAD_LD0__LD0 0x0 - MX27_PAD_LD1__LD1 0x0 - MX27_PAD_LD2__LD2 0x0 - MX27_PAD_LD3__LD3 0x0 - MX27_PAD_LD4__LD4 0x0 - MX27_PAD_LD5__LD5 0x0 - MX27_PAD_LD6__LD6 0x0 - MX27_PAD_LD7__LD7 0x0 - MX27_PAD_LD8__LD8 0x0 - MX27_PAD_LD9__LD9 0x0 - MX27_PAD_LD10__LD10 0x0 - MX27_PAD_LD11__LD11 0x0 - MX27_PAD_LD12__LD12 0x0 - MX27_PAD_LD13__LD13 0x0 - MX27_PAD_LD14__LD14 0x0 - MX27_PAD_LD15__LD15 0x0 - MX27_PAD_LD16__LD16 0x0 - MX27_PAD_LD17__LD17 0x0 - MX27_PAD_CONTRAST__CONTRAST 0x0 - MX27_PAD_OE_ACD__OE_ACD 0x0 - MX27_PAD_HSYNC__HSYNC 0x0 - MX27_PAD_VSYNC__VSYNC 0x0 - >; - }; + pinctrl_imxfb: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; - pinctrl_lcdreg: lcdreggrp { - fsl,pins = < - MX27_PAD_CLS__GPIO1_25 0x0 - >; - }; + pinctrl_lcdreg: lcdreggrp { + fsl,pins = < + MX27_PAD_CLS__GPIO1_25 0x0 + >; + }; - pinctrl_sdhc1: sdhc1grp { - fsl,pins = < - MX27_PAD_SD1_CLK__SD1_CLK 0x0 - MX27_PAD_SD1_CMD__SD1_CMD 0x0 - MX27_PAD_SD1_D0__SD1_D0 0x0 - MX27_PAD_SD1_D1__SD1_D1 0x0 - MX27_PAD_SD1_D2__SD1_D2 0x0 - MX27_PAD_SD1_D3__SD1_D3 0x0 - >; - }; + pinctrl_sdhc1: sdhc1grp { + fsl,pins = < + MX27_PAD_SD1_CLK__SD1_CLK 0x0 + MX27_PAD_SD1_CMD__SD1_CMD 0x0 + MX27_PAD_SD1_D0__SD1_D0 0x0 + MX27_PAD_SD1_D1__SD1_D1 0x0 + MX27_PAD_SD1_D2__SD1_D2 0x0 + MX27_PAD_SD1_D3__SD1_D3 0x0 + >; + }; - pinctrl_ssi1: ssi1grp { - fsl,pins = < - MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 - MX27_PAD_SSI4_FS__SSI4_FS 0x0 - MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 - MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 - >; - }; + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 + MX27_PAD_SSI4_FS__SSI4_FS 0x0 + MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 + MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 + >; + }; - pinctrl_touch: touchgrp { - fsl,pins = < - MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ - >; - }; + pinctrl_touch: touchgrp { + fsl,pins = < + MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - MX27_PAD_UART1_CTS__UART1_CTS 0x0 - MX27_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX27_PAD_UART2_TXD__UART2_TXD 0x0 - MX27_PAD_UART2_RXD__UART2_RXD 0x0 - MX27_PAD_UART2_CTS__UART2_CTS 0x0 - MX27_PAD_UART2_RTS__UART2_RTS 0x0 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX27_PAD_UART2_TXD__UART2_TXD 0x0 + MX27_PAD_UART2_RXD__UART2_RXD 0x0 + MX27_PAD_UART2_CTS__UART2_CTS 0x0 + MX27_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX27_PAD_UART3_TXD__UART3_TXD 0x0 - MX27_PAD_UART3_RXD__UART3_RXD 0x0 - MX27_PAD_UART3_CTS__UART3_CTS 0x0 - MX27_PAD_UART3_RTS__UART3_RTS 0x0 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX27_PAD_UART3_TXD__UART3_TXD 0x0 + MX27_PAD_UART3_RXD__UART3_RXD 0x0 + MX27_PAD_UART3_CTS__UART3_CTS 0x0 + MX27_PAD_UART3_RTS__UART3_RTS 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts index 21d436972aa4..2fc4ea5b9501 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts @@ -110,76 +110,74 @@ }; &iomuxc { - imx27-pdk { - pinctrl_cspi2: cspi2grp { - fsl,pins = < - MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 - MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 - MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 - MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ - MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ - >; - }; + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ + MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ + >; + }; - pinctrl_fec: fecgrp { - fsl,pins = < - MX27_PAD_SD3_CMD__FEC_TXD0 0x0 - MX27_PAD_SD3_CLK__FEC_TXD1 0x0 - MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 - MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 - MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 - MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 - MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 - MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 - MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 - MX27_PAD_ATA_DATA7__FEC_MDC 0x0 - MX27_PAD_ATA_DATA8__FEC_CRS 0x0 - MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 - MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 - MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 - MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 - MX27_PAD_ATA_DATA13__FEC_COL 0x0 - MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 - MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 - >; - }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX27_PAD_NFRB__NFRB 0x0 - MX27_PAD_NFCLE__NFCLE 0x0 - MX27_PAD_NFWP_B__NFWP_B 0x0 - MX27_PAD_NFCE_B__NFCE_B 0x0 - MX27_PAD_NFALE__NFALE 0x0 - MX27_PAD_NFRE_B__NFRE_B 0x0 - MX27_PAD_NFWE_B__NFWE_B 0x0 - >; - }; + pinctrl_nand: nandgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - MX27_PAD_UART1_CTS__UART1_CTS 0x0 - MX27_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 - MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 - MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 - MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 - MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 - MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 - MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 - MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 - MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 - MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 - MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 - MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts index 27c93b9fe049..2b884cb3e381 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts @@ -65,58 +65,56 @@ }; &iomuxc { - imx27-phycard-s-rdk { - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX27_PAD_I2C_DATA__I2C_DATA 0x0 - MX27_PAD_I2C_CLK__I2C_CLK 0x0 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; - pinctrl_owire1: owire1grp { - fsl,pins = < - MX27_PAD_RTCK__OWIRE 0x0 - >; - }; + pinctrl_owire1: owire1grp { + fsl,pins = < + MX27_PAD_RTCK__OWIRE 0x0 + >; + }; - pinctrl_sdhc2: sdhc2grp { - fsl,pins = < - MX27_PAD_SD2_CLK__SD2_CLK 0x0 - MX27_PAD_SD2_CMD__SD2_CMD 0x0 - MX27_PAD_SD2_D0__SD2_D0 0x0 - MX27_PAD_SD2_D1__SD2_D1 0x0 - MX27_PAD_SD2_D2__SD2_D2 0x0 - MX27_PAD_SD2_D3__SD2_D3 0x0 - MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ - >; - }; + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - MX27_PAD_UART1_CTS__UART1_CTS 0x0 - MX27_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX27_PAD_UART2_TXD__UART2_TXD 0x0 - MX27_PAD_UART2_RXD__UART2_RXD 0x0 - MX27_PAD_UART2_CTS__UART2_CTS 0x0 - MX27_PAD_UART2_RTS__UART2_RTS 0x0 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX27_PAD_UART2_TXD__UART2_TXD 0x0 + MX27_PAD_UART2_RXD__UART2_RXD 0x0 + MX27_PAD_UART2_CTS__UART2_CTS 0x0 + MX27_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX27_PAD_UART3_TXD__UART3_TXD 0x0 - MX27_PAD_UART3_RXD__UART3_RXD 0x0 - MX27_PAD_UART3_CTS__UART3_CTS 0x0 - MX27_PAD_UART3_RTS__UART3_RTS 0x0 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX27_PAD_UART3_TXD__UART3_TXD 0x0 + MX27_PAD_UART3_RXD__UART3_RXD 0x0 + MX27_PAD_UART3_CTS__UART3_CTS 0x0 + MX27_PAD_UART3_RTS__UART3_RTS 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi index 31b3fc972abb..2f60b3809f39 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi @@ -58,94 +58,92 @@ }; &iomuxc { - imx27-phycard-s-som { - pinctrl_fec1: fec1grp { - fsl,pins = < - MX27_PAD_SD3_CMD__FEC_TXD0 0x0 - MX27_PAD_SD3_CLK__FEC_TXD1 0x0 - MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 - MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 - MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 - MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 - MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 - MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 - MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 - MX27_PAD_ATA_DATA7__FEC_MDC 0x0 - MX27_PAD_ATA_DATA8__FEC_CRS 0x0 - MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 - MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 - MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 - MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 - MX27_PAD_ATA_DATA13__FEC_COL 0x0 - MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 - MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 - >; - }; - - pinctrl_nfc: nfcgrp { - fsl,pins = < - MX27_PAD_NFRB__NFRB 0x0 - MX27_PAD_NFCLE__NFCLE 0x0 - MX27_PAD_NFWP_B__NFWP_B 0x0 - MX27_PAD_NFCE_B__NFCE_B 0x0 - MX27_PAD_NFALE__NFALE 0x0 - MX27_PAD_NFRE_B__NFRE_B 0x0 - MX27_PAD_NFWE_B__NFWE_B 0x0 - >; - }; - - pinctrl_usbotgphy: usbotgphygrp { - fsl,pins = < - MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */ - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 - MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 - MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 - MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 - MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 - MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 - MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 - MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 - MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 - MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 - MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 - MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 - >; - }; - - pinctrl_usbh2phy: usbh2phygrp { - fsl,pins = < - MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */ - >; - }; - - pinctrl_usbh2: usbh2grp { - fsl,pins = < - MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 - MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 - MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 - MX27_PAD_USBH2_STP__USBH2_STP 0x0 - MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 - MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 - MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 - MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 - MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 - MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 - MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 - MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 + MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_usbotgphy: usbotgphygrp { + fsl,pins = < + MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + + pinctrl_usbh2phy: usbh2phygrp { + fsl,pins = < + MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */ + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index b8048e12e3d9..d7136c399ae2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -89,119 +89,117 @@ }; &iomuxc { - imx27_phycore_rdk { - pinctrl_csien: csiengrp { - fsl,pins = < - MX27_PAD_USB_OC_B__GPIO2_24 0x0 - >; - }; + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; - pinctrl_cspi1cs1: cspi1cs1grp { - fsl,pins = < - MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 - >; - }; + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; - pinctrl_imxfb1: imxfbgrp { - fsl,pins = < - MX27_PAD_LD0__LD0 0x0 - MX27_PAD_LD1__LD1 0x0 - MX27_PAD_LD2__LD2 0x0 - MX27_PAD_LD3__LD3 0x0 - MX27_PAD_LD4__LD4 0x0 - MX27_PAD_LD5__LD5 0x0 - MX27_PAD_LD6__LD6 0x0 - MX27_PAD_LD7__LD7 0x0 - MX27_PAD_LD8__LD8 0x0 - MX27_PAD_LD9__LD9 0x0 - MX27_PAD_LD10__LD10 0x0 - MX27_PAD_LD11__LD11 0x0 - MX27_PAD_LD12__LD12 0x0 - MX27_PAD_LD13__LD13 0x0 - MX27_PAD_LD14__LD14 0x0 - MX27_PAD_LD15__LD15 0x0 - MX27_PAD_LD16__LD16 0x0 - MX27_PAD_LD17__LD17 0x0 - MX27_PAD_CLS__CLS 0x0 - MX27_PAD_CONTRAST__CONTRAST 0x0 - MX27_PAD_LSCLK__LSCLK 0x0 - MX27_PAD_OE_ACD__OE_ACD 0x0 - MX27_PAD_PS__PS 0x0 - MX27_PAD_REV__REV 0x0 - MX27_PAD_SPL_SPR__SPL_SPR 0x0 - MX27_PAD_HSYNC__HSYNC 0x0 - MX27_PAD_VSYNC__VSYNC 0x0 - >; - }; + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; - pinctrl_i2c1: i2c1grp { - /* Add pullup to DATA line */ - fsl,pins = < - MX27_PAD_I2C_DATA__I2C_DATA 0x1 - MX27_PAD_I2C_CLK__I2C_CLK 0x0 - >; - }; + pinctrl_i2c1: i2c1grp { + /* Add pullup to DATA line */ + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x1 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; - pinctrl_owire1: owire1grp { - fsl,pins = < - MX27_PAD_RTCK__OWIRE 0x0 - >; - }; + pinctrl_owire1: owire1grp { + fsl,pins = < + MX27_PAD_RTCK__OWIRE 0x0 + >; + }; - pinctrl_sdhc2: sdhc2grp { - fsl,pins = < - MX27_PAD_SD2_CLK__SD2_CLK 0x0 - MX27_PAD_SD2_CMD__SD2_CMD 0x0 - MX27_PAD_SD2_D0__SD2_D0 0x0 - MX27_PAD_SD2_D1__SD2_D1 0x0 - MX27_PAD_SD2_D2__SD2_D2 0x0 - MX27_PAD_SD2_D3__SD2_D3 0x0 - MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */ - MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ - >; - }; + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */ + MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - MX27_PAD_UART1_CTS__UART1_CTS 0x0 - MX27_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX27_PAD_UART2_TXD__UART2_TXD 0x0 - MX27_PAD_UART2_RXD__UART2_RXD 0x0 - MX27_PAD_UART2_CTS__UART2_CTS 0x0 - MX27_PAD_UART2_RTS__UART2_RTS 0x0 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX27_PAD_UART2_TXD__UART2_TXD 0x0 + MX27_PAD_UART2_RXD__UART2_RXD 0x0 + MX27_PAD_UART2_CTS__UART2_CTS 0x0 + MX27_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; - pinctrl_usbh2: usbh2grp { - fsl,pins = < - MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 - MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 - MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 - MX27_PAD_USBH2_STP__USBH2_STP 0x0 - MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 - MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 - MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 - MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 - MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 - MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 - MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 - MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 - >; - }; + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; + }; - pinctrl_weim: weimgrp { - fsl,pins = < - MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */ - MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */ - >; - }; + pinctrl_weim: weimgrp { + fsl,pins = < + MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */ + MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */ + >; }; }; @@ -248,14 +246,14 @@ linux,default-trigger = "nand-disk"; }; - ledg3: led@10 { - reg = <10>; + ledg3: led@a { + reg = <0xa>; label = "system:green3:live"; linux,default-trigger = "heartbeat"; }; - ledb3: led@11 { - reg = <11>; + ledb3: led@b { + reg = <0xb>; label = "system:blue3:cpu"; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi index e958d7286ae9..7d5d24c781b9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi @@ -192,90 +192,88 @@ }; &iomuxc { - imx27_phycore_som { - pinctrl_cspi1: cspi1grp { - fsl,pins = < - MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 - MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 - MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 - MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - >; - }; + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 + MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 + MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 + MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - MX27_PAD_SD3_CMD__FEC_TXD0 0x0 - MX27_PAD_SD3_CLK__FEC_TXD1 0x0 - MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 - MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 - MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 - MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 - MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 - MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 - MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 - MX27_PAD_ATA_DATA7__FEC_MDC 0x0 - MX27_PAD_ATA_DATA8__FEC_CRS 0x0 - MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 - MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 - MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 - MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 - MX27_PAD_ATA_DATA13__FEC_COL 0x0 - MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 - MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 - MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */ - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */ + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 + MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - MX27_PAD_NFRB__NFRB 0x0 - MX27_PAD_NFCLE__NFCLE 0x0 - MX27_PAD_NFWP_B__NFWP_B 0x0 - MX27_PAD_NFCE_B__NFCE_B 0x0 - MX27_PAD_NFALE__NFALE 0x0 - MX27_PAD_NFRE_B__NFRE_B 0x0 - MX27_PAD_NFWE_B__NFWE_B 0x0 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; - pinctrl_ssi1: ssi1grp { - fsl,pins = < - MX27_PAD_SSI1_FS__SSI1_FS 0x0 - MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 - MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 - MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 - >; - }; + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 - MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 - MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 - MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 - MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 - MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 - MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 - MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 - MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 - MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 - MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 - MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index 989b7659b669..28403a34638e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -49,7 +49,7 @@ clocks { clk_osc26m: osc26m { - compatible = "fsl,imx-osc26m", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; @@ -289,7 +289,7 @@ status = "disabled"; }; - iomuxc: iomuxc@10015000 { + iomuxc: pinmux@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts index d17abdfb6330..630f8fa69ba8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts +++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts @@ -157,7 +157,7 @@ &weim { status = "okay"; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0 0x0 0x200000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi index 00006c90d9a7..c58f855ea851 100644 --- a/arch/arm/boot/dts/nxp/imx/imx31.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi @@ -218,7 +218,7 @@ }; iim: efuse@5001c000 { - compatible = "fsl,imx31-iim", "fsl,imx27-iim"; + compatible = "fsl,imx31-iim"; reg = <0x5001c000 0x1000>; interrupts = <19>; clocks = <&clks 25>; @@ -333,14 +333,14 @@ }; }; - emi@b8000000 { /* External Memory Interface */ + emi-bus@b8000000 { /* External Memory Interface */ compatible = "simple-bus"; reg = <0xb8000000 0x5000>; ranges; #address-cells = <1>; #size-cells = <1>; - nfc: nand@b8000000 { + nfc: nand-controller@b8000000 { compatible = "fsl,imx31-nand", "fsl,imx27-nand"; reg = <0xb8000000 0x1000>; interrupts = <33>; diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi index ef546525e2ec..0064b5452b54 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi @@ -26,7 +26,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi index 30beb39e0162..ab7b64639989 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi @@ -79,7 +79,7 @@ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; reg = <0x43f80000 0x4000>; clocks = <&clks 51>; - clock-names = "ipg_per"; + clock-names = "ipg"; interrupts = <10>; status = "disabled"; }; @@ -90,7 +90,7 @@ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; reg = <0x43f84000 0x4000>; clocks = <&clks 53>; - clock-names = "ipg_per"; + clock-names = "ipg"; interrupts = <3>; status = "disabled"; }; @@ -119,7 +119,7 @@ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; reg = <0x43f98000 0x4000>; clocks = <&clks 52>; - clock-names = "ipg_per"; + clock-names = "ipg"; interrupts = <4>; status = "disabled"; }; @@ -356,14 +356,14 @@ }; }; - emi@80000000 { /* External Memory Interface */ + emi-bus@80000000 { /* External Memory Interface */ compatible = "fsl,emi", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80000000 0x40000000>; ranges; - nfc: nand@bb000000 { + nfc: nand-controller@bb000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx35-nand", "fsl,imx25-nand"; @@ -393,21 +393,13 @@ }; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usb-phy@0 { - reg = <0>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; + usbphy0: usb-phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; - usbphy1: usb-phy@1 { - reg = <1>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; + usbphy1: usb-phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts index b1a6a9c58ac3..4725ee241cb1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts @@ -58,6 +58,16 @@ }; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; + }; + sd2_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -135,7 +145,34 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + pmic@68 { + compatible = "ti,tps65185"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic>; + pwr-good-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + vcom-ctrl-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + vin-supply = <&epd_pmic_supply>; + interrupts-extended = <&gpio4 15 IRQ_TYPE_LEVEL_LOW>; + + regulators { + vcom { + regulator-name = "vcom"; + }; + + vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + }; + + v3p3 { + regulator-name = "v3p3"; + }; + }; + }; }; &i2c3 { @@ -161,6 +198,27 @@ >; }; + pinctrl_epd_pmic: epd-pmic-grp { + fsl,pins = < + /* PWRUP */ + MX50_PAD_EPDC_PWRCTRL1__GPIO3_30 0x0 + /* WAKEUP */ + MX50_PAD_EPDC_PWRCTRL0__GPIO3_29 0x0 + /* VCOMCTRL */ + MX50_PAD_EPDC_VCOM0__GPIO4_21 0x0 + /* PWRGOOD: enable internal 100k pull-up */ + MX50_PAD_EPDC_PWRSTAT__GPIO3_28 0xe0 + /* INT: enable internal 100k pull-up */ + MX50_PAD_ECSPI1_SS0__GPIO4_15 0xe0 + >; + }; + + pinctrl_epd_pmic_supply: epd-pmic-supply-grp { + fsl,pins = < + MX50_PAD_EIM_CRE__GPIO1_27 0x0 + >; + }; + pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < MX50_PAD_CSPI_MISO__GPIO4_10 0x0 diff --git a/arch/arm/boot/dts/nxp/imx/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi index 1b6f444443dd..d76c496b3f71 100644 --- a/arch/arm/boot/dts/nxp/imx/imx50.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi @@ -338,7 +338,7 @@ clks: ccm@53fd4000 { compatible = "fsl,imx50-ccm"; reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts index 1b6ec55f9068..b17264e06e69 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts @@ -327,7 +327,7 @@ }; }; - flash: at45db321d@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi index dc72a2d14960..1980f751f161 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi @@ -165,7 +165,7 @@ mma7455l@1d { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mma7455l>; - compatible = "fsl,mma7455l"; + compatible = "fsl,mma7455"; reg = <0x1d>; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi index 0a150c91d30f..244740d65b3d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi @@ -26,7 +26,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts index 079bd3d14999..5118a68dbbdc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts @@ -141,7 +141,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - fpga@0 { + fpga-bus@0,0 { compatible = "simple-bus"; fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000 0x00000000 0x1c092480 0x00000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts index 06545a6052f7..91c63d1f2604 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts @@ -259,7 +259,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -271,7 +271,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -398,13 +398,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled0@3 { + led@3 { reg = <3>; label = "system:green:status"; linux,default-trigger = "default-on"; }; - sysled1@4 { + led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts index 26eb7a9506e4..1598bf4f4991 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts @@ -225,13 +225,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts index 19a3b142c964..c2dcfd44c445 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts @@ -153,13 +153,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi index cc88da4d7785..c8698a9af1a7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi @@ -458,7 +458,7 @@ clks: ccm@73fd4000 { compatible = "fsl,imx51-ccm"; reg = <0x73fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; }; @@ -476,7 +476,7 @@ }; iim: efuse@83f98000 { - compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon"; + compatible = "fsl,imx51-iim"; reg = <0x83f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; @@ -595,7 +595,7 @@ status = "disabled"; }; - nfc: nand@83fdb000 { + nfc: nand-controller@83fdb000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx51-nand"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi index ebbd4d93e460..543cf723008f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi @@ -42,14 +42,14 @@ led-bus { label = "bus"; gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; led-error { label = "error"; gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi index df543b4751e0..89b17509ad48 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi @@ -47,7 +47,7 @@ interrupt-parent = <&gpio7>; irq-trigger = <0x1>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts index c14eb7280f09..3cdb87ac1d7c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts @@ -162,7 +162,7 @@ }; expander: pca9554@20 { - compatible = "pca9554"; + compatible = "nxp,pca9554"; reg = <0x20>; interrupts = <109>; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts index e939acc1c88b..e45a97d3f449 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts @@ -537,6 +537,8 @@ mpl3115: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; eeprom: eeprom@50 { @@ -593,7 +595,7 @@ touchscreen@4b { compatible = "atmel,maxtouch"; - reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; reg = <0x4b>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts index 2f06ad61a766..6938ad6dbc2c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts @@ -28,6 +28,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1a { regulator-name = "SW1"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts index 386371c816f4..a1e19f9709b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts @@ -31,6 +31,20 @@ linux,code = <KEY_VOLUMEDOWN>; }; }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &esdhc1 { @@ -253,6 +267,10 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX5_CLK_DUMMY>; + VDDA-supply = <®_1v8>; + VDDIO-supply = <®_3v3>; }; magnetometer: mag3110@e { diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index 5f62c99909c5..872cf7e16f20 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts index 9c9122da3737..96c37f4296e5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi index 29e3f5f37c25..88855d3b2031 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2012-2017 <LW@KARO-electronics.de> * based on imx53-qsb.dts * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx53.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts index acc44010d510..3ad9db4b1442 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * USB armory MkI device tree file * https://inversepath.com/usbarmory * * Copyright (C) 2015, Inverse Path * Andrej Rosano <andrej@inversepath.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi index 845e2bf8460a..93225a56896f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi @@ -598,7 +598,7 @@ clks: ccm@53fd4000 { compatible = "fsl,imx53-ccm"; reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; + interrupts = <71>, <72>; #clock-cells = <1>; }; @@ -668,7 +668,7 @@ }; iim: efuse@63f98000 { - compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon"; + compatible = "fsl,imx53-iim"; reg = <0x63f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; @@ -775,7 +775,7 @@ status = "disabled"; }; - nfc: nand@63fdb000 { + nfc: nand-controller@63fdb000 { compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts index 4989e8d069a1..aed4fb7843e2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts @@ -25,7 +25,7 @@ clock-output-names = "enet_ref_pad"; }; - i2c2-mux { + i2c-mux-2 { compatible = "i2c-mux"; i2c-parent = <&i2c2>; mux-controls = <&i2c_mux>; @@ -45,7 +45,7 @@ }; }; - i2c4-mux { + i2c-mux-4 { compatible = "i2c-mux"; i2c-parent = <&i2c4>; mux-controls = <&i2c_mux>; @@ -193,8 +193,8 @@ }; &clks { - clocks = <&clock_ksz8081>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clock_ksz8081>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clock_ksz8081>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts index c9b2ea2b24b2..fc62ba2a4fcb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts index 5e15212eaf3a..bf8e07f97143 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "imx6dl.dtsi" @@ -56,6 +20,7 @@ panel: panel { compatible = "lg,lb070wv8"; backlight = <&backlight>; + power-supply = <®_3p3v>; enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; port { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi index 590dcc0953cc..5dc7f1f9ca17 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi @@ -47,7 +47,8 @@ mpl3115a2: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; - + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; /* * The MPL3115 interrupts are connected to pin 22 and 23 * of &tca6424a, but the binding does not yet support diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts new file mode 100644 index 000000000000..44c78c07f431 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-aster.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Aster Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts new file mode 100644 index 000000000000..93fd0af53a3c --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-eval-v3.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Evaluation Board V3"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts new file mode 100644 index 000000000000..92d41fc9a13f --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-iris-v2.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris V2 Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts new file mode 100644 index 000000000000..c8957948c887 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" +#include "imx6qdl-colibri-v1.2.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts index 5ed55f74b398..5f61eeb9fad0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts @@ -66,8 +66,8 @@ }; &clks { - clocks = <&rmii_clk>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&rmii_clk>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&rmii_clk>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts index 82d5f85722ea..50dd3df9dd04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts index 59b8afc36e66..8ca5b6b8da07 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts index 21bdfaf8df53..b94455406a57 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts index 103261ea9334..dd978105b42f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts index 9c6d3cd3d6a7..172dad423639 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts index 7c62db91173b..9bde65462558 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts @@ -72,6 +72,7 @@ panel { compatible = "edt,etm0700g0bdh6"; backlight = <&backlight>; + power-supply = <®_panel>; port { panel_in: endpoint { @@ -89,6 +90,13 @@ enable-active-high; }; + reg_panel: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -111,8 +119,8 @@ }; &clks { - clocks = <&clock_ksz8081>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clock_ksz8081>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clock_ksz8081>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts index 84f34da06267..69e790ba5662 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts @@ -101,8 +101,8 @@ }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clk50m_phy>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts index dfa8110b1d97..fbff77944ce3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts @@ -123,7 +123,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -137,7 +137,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -199,8 +199,8 @@ }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clk50m_phy>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts index 0b1275a8891f..dcd5a4099c60 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts @@ -294,8 +294,8 @@ }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; @@ -557,7 +557,6 @@ &usbh1 { vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; disable-over-current; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts index 29dc6875ab66..353f7097cb7e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts @@ -55,7 +55,7 @@ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>; + io-channels = <&vdiv_vaccu 0>; }; keys { @@ -256,7 +256,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -270,7 +270,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -318,7 +318,7 @@ io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi index de80ca141bca..fb674ac2c248 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi @@ -14,6 +14,7 @@ / { memory@10000000 { reg = <0x10000000 0x40000000>; + device_type = "memory"; }; reg_3p3v: 3p3v { @@ -70,8 +71,9 @@ }; &clks { - clocks = <&rtc_sqw>; - clock-names = "ckil"; + clocks = <&osc>, <&rtc_sqw>, <&ckih1>, <&anaclk1>, <&anaclk2>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, @@ -157,7 +159,7 @@ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - rtc: m41t62@68 { + rtc: rtc@68 { compatible = "st,m41t62"; reg = <0x68>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts index e9ac4768f36c..55b7e91d2ac0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts @@ -389,8 +389,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts index 7436626673fc..136ae7841878 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts index fc23b4d291a1..e1b525ed292a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts index 9eb2ef17339c..9a6a5cda9a3b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts index 4101c6597721..0e8f4c3f3760 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts index a5532ecc18c5..9958e8701c98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts index 67ed0452f5de..d9bfd340efb2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts index d34189fc52d9..8243f0d6d387 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts index 7030b2654bbd..2d031403ab19 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts index aef5fcc42904..684a2583db75 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts index 5342f2f5a8a8..7fdc794615f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts index c4588fb0bf6f..209aaebe148a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts index 4875afadb630..18019a6bb3af 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts @@ -35,7 +35,7 @@ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; + io-channels = <&vdiv_vaccu 0>, <&vdiv_hitch_pos 0>; }; panel { @@ -84,7 +84,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -98,7 +98,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -147,7 +147,7 @@ io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; vdiv_hitch_pos: voltage-divider-hitch-pos { @@ -155,13 +155,13 @@ io-channels = <&adc_ts 6>; output-ohms = <3300>; full-ohms = <13300>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clk50m_phy>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi index 8bc6376d0dc1..4a5736526927 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -279,28 +279,32 @@ #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; + led@1 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; + led@2 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts index 5c2cd517589b..0a6b668428a3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts @@ -21,6 +21,10 @@ status = "okay"; }; +&beeper { + status = "okay"; +}; + &lcd_display { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi index 2f42c56c21f6..6e49e1ccf6fc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi @@ -26,6 +26,12 @@ status = "disabled"; }; + beeper: beeper { + compatible = "pwm-beeper"; + pwms = <&pwm3 0 500000 0>; + status = "disabled"; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -272,28 +278,32 @@ #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x6e>; - max-cur = /bits/ 8 <0xc8>; - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x6e>; + max-cur = /bits/ 8 <0xc8>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; + led@1 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; + led@2 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; }; }; @@ -466,6 +476,13 @@ >; }; + pinctrl_sound: soundgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x8 + >; + }; + pinctrl_touch: touchgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 @@ -551,6 +568,12 @@ status = "disabled"; }; +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound>; + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts index e1077e2da5f4..1f2200f50059 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts @@ -36,15 +36,6 @@ status = "okay"; }; -/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ -&i2c1 { - /* PCIe Switch */ - pcie-switch@58 { - compatible = "plx,pex8605"; - reg = <0x58>; - }; -}; - &pcie { vpcie-supply = <®_pcie_switch>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts new file mode 100644 index 000000000000..908dab57fd87 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-eval-v1.2.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board v1.2"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts new file mode 100644 index 000000000000..5463d4127382 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-eval.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts new file mode 100644 index 000000000000..84eabf81ba84 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora-v1.1.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.1"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts new file mode 100644 index 000000000000..d7cfab4de457 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora-v1.2.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.2"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts new file mode 100644 index 000000000000..189b074e31ce --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +/dts-v1/; + +#include "imx6q-apalis-ixora.dts" +#include "imx6qdl-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts index d994b32ad825..7326b8ad08cb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts @@ -140,6 +140,7 @@ port@4 { reg = <4>; label = "cpu"; + phy-mode = "gmii"; ethernet = <&switch_nic>; phy-handle = <&switchphy4>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts index b0d345f5d071..9a43935be11c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts @@ -139,6 +139,7 @@ port@4 { reg = <4>; label = "cpu"; + phy-mode = "gmii"; ethernet = <&switch_nic>; phy-handle = <&switchphy4>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts index cad112e05475..d00236a07dc4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts @@ -53,23 +53,20 @@ }; }; -&ldb { - fsl,dual-channel; - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - status = "okay"; - - port@4 { - reg = <4>; +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "PWGIN", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; - lvds0_out: endpoint { - remote-endpoint = <&stdp4028_in>; - }; - }; - }; +&hdmi { + ddc-i2c-bus = <&mux2_i2c1>; }; &i2c2 { @@ -129,8 +126,23 @@ }; }; -&hdmi { - ddc-i2c-bus = <&mux2_i2c1>; +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&stdp4028_in>; + }; + }; + }; }; &mux1_i2c1 { @@ -286,7 +298,12 @@ port@4 { reg = <4>; label = "cpu"; + phy-mode = "gmii"; ethernet = <&switch_nic>; phy-handle = <&switchphy4>; }; }; + +&usdhc4 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi index d77472519086..02d66523668d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi @@ -222,6 +222,8 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio7>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; @@ -335,7 +337,7 @@ pinctrl-0 = <&pinctrl_rtc>; reg = <0x32>; interrupt-parent = <&gpio4>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts index d3f14b4d3b51..929def2bb35e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts @@ -46,6 +46,7 @@ panel { compatible = "dataimage,fg1001l0dsswmg01"; backlight = <&backlight_lvds>; + power-supply = <®_lcd>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index aa1adcc74019..2c8d2ab8cda1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -124,24 +124,28 @@ reg = <0>; interrupt-parent = <&switch>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + max-speed = <100>; /* only 100Mbit/s lanes are routed */ }; switchphy1: switchphy@1 { reg = <1>; interrupt-parent = <&switch>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + max-speed = <100>; /* only 100Mbit/s lanes are routed */ }; switchphy2: switchphy@2 { reg = <2>; interrupt-parent = <&switch>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + max-speed = <100>; /* only 100Mbit/s lanes are routed */ }; switchphy3: switchphy@3 { reg = <3>; interrupt-parent = <&switch>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + max-speed = <100>; /* only 100Mbit/s lanes are routed */ }; switchphy4: switchphy@4 { @@ -160,7 +164,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: flash@0 { + m25_eeprom: eeprom@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; @@ -195,6 +199,8 @@ mma8453: mma8453@1c { compatible = "fsl,mma8453"; reg = <0x1c>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; @@ -211,6 +217,8 @@ mpl3115: mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 299106fbe51c..13245af8f74d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -73,7 +73,7 @@ reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; }; - reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + reg_pcie_power_on_gpio: regulator-pcie-power-on { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; regulator-min-microvolt = <3300000>; @@ -99,6 +99,34 @@ enable-active-high; }; + avdd_reg: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hpvdd_reg: regulator-hpvdd { + compatible = "regulator-fixed"; + regulator-name = "hpvdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + dcvdd_reg: regulator-dcvdd { + compatible = "regulator-fixed"; + regulator-name = "dcvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dbvdd_reg: regulator-dbvdd { + compatible = "regulator-fixed"; + regulator-name = "dbvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound-analog { compatible = "simple-audio-card"; simple-audio-card,name = "On-board analog audio"; @@ -307,6 +335,10 @@ #sound-dai-cells = <0>; compatible = "wlf,wm8731"; reg = <0x1a>; + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts index 16658b76fc4e..059750270fc4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts @@ -1,38 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi index 4ab31f2217cd..4e448b4810f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi @@ -1,38 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts index c5525b2c1dbd..cbe580dec182 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts @@ -236,9 +236,12 @@ vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio1: stmpe_gpio { + stmpe_gpio1: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; @@ -250,9 +253,12 @@ vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio2: stmpe_gpio { + stmpe_gpio2: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; @@ -266,7 +272,7 @@ reg = <0x4d>; }; - rtc: m41t62@68 { + rtc: rtc@68 { compatible = "st,m41t62"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts index d2d0a82ea178..484a60892229 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: flash@0 { + m25_eeprom: eeprom@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts index 78d941fef5df..c936180ed32a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts @@ -55,6 +55,13 @@ reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usbh1_vbus: regulator-usbhubreset { compatible = "regulator-fixed"; regulator-name = "usbh1_vbus"; @@ -81,6 +88,7 @@ panel { compatible = "sharp,lq101k1ly04"; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -124,7 +132,7 @@ pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>; status = "okay"; - eeprom: m95m02@1 { + eeprom: eeprom@1 { compatible = "st,m95m02", "atmel,at25"; size = <262144>; pagesize = <256>; @@ -134,7 +142,7 @@ }; pb_rtc: rtc@3 { - compatible = "nxp,rtc-pcf2123"; + compatible = "nxp,pcf2123"; spi-max-frequency = <2450000>; spi-cs-high; reg = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts index c5c144879fa6..bf8fde9cb38d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts @@ -184,7 +184,7 @@ #gpio-cells = <2>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts index 2c7feeef1b0e..44d1871ac666 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts index e9c224cea752..22842f2ef685 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts index 735f2bbf1439..c69fdd064e2f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts index a182e4cb0e6e..a9a33eeb9712 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts index ca1e2ae3341e..25a93cd4e5f5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts index 46e011a363e8..4c8ea4381559 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts @@ -171,7 +171,7 @@ reg = <0x51>; }; - rtc: pcf8523@68 { + rtc: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts index 02aca1e28ce3..1ad3bdcea4a3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts @@ -16,6 +16,7 @@ panel { compatible = "ampire,am-1280800n3tzqw-t00h"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts index 241811c52b62..9e1c64da0b30 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts @@ -16,6 +16,7 @@ panel { compatible = "koe,tx31d200vm0baa"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi index c425d427663d..d6deb8c22b8c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi @@ -69,14 +69,14 @@ led-green { label = "led1"; gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; led-red { label = "led0"; gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts index f08b37010291..ef5c0eda8b15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts @@ -279,7 +279,7 @@ ranges = <0 0 0x08000000 0x08000000>; status = "okay"; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x02000000>; #address-cells = <1>; @@ -292,8 +292,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_backlight: dispgrp { fsl,pins = < /* BLEN_OUT */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts index 8c3a9ea8d5b3..24fc3ff1c70c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts @@ -265,7 +265,7 @@ reg = <0x1c>; }; - rtc: pcf8523@68 { + rtc: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; @@ -288,7 +288,7 @@ vio-supply = <®_3p3v>; vcc-supply = <®_3p3v>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts index 56b77cc0af2b..b8567167779c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts @@ -145,6 +145,7 @@ panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -324,8 +325,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index fb81bd8ba035..73ed40ae5a7b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -57,6 +57,7 @@ panel { compatible = "kyo,tcg121xglp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -72,6 +73,13 @@ regulator-max-microvolt = <1800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts index 0e02e448db10..5ef1ce808699 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts @@ -57,8 +57,8 @@ }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clk50m_phy>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 5353a0c24420..3bd0e2c9e57a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -37,7 +37,7 @@ 3000 1>; }; - ir_recv { + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts index 393bfec58e2f..d630c572c704 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts index 4ee860b626ff..01ac3493fa32 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts index 1ab175ffa238..1013025cb2d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts index 0a4daec8d3ad..5dd8f1642db3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts index 9ffbb0fe7df8..ffa79c0eb05a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts index cb2fcb4896c6..1346fd663d68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts index d43a5d8f1749..eac07d5944cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts index f7b0acb65352..c485da35d333 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts index 387edf2b3f96..53304fc3a90b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts index aae81feee00d..c78f101c3cc1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts @@ -326,11 +326,14 @@ &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; + bus-range = <0x00 0xff>; + ranges; /* non-removable i211 ethernet card */ - eth1: intel,i211@pcie0,0 { + eth1: ethernet@0,0 { reg = <0x010000 0 0 0 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 18a620832a2a..a55644529c67 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -8,6 +8,7 @@ /dts-v1/; +#include "imx6q.dtsi" #include "imx6qdl-var-som.dtsi" #include <dt-bindings/pwm/pwm.h> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts index ec6651ba4ba2..7332f2718982 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts @@ -17,6 +17,10 @@ }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi new file mode 100644 index 000000000000..83fa04fc9f18 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +&i2c2 { + /delete-node/ stmpe811@41; + + ad7879_ts: touchscreen@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + tla2024_adc: adc@49 { + compatible = "ti,tla2024"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Apalis AN1_ADC0 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_ADC1 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_ADC2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Apalis AN1_TSWIP_ADC3 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index 88be29166c1a..5fcd7cdb7001 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -10,7 +10,6 @@ / { model = "Toradex Apalis iMX6Q/D Module"; - compatible = "toradex,apalis_imx6q", "fsl,imx6q"; aliases { mmc0 = &usdhc3; /* eMMC */ @@ -649,7 +648,7 @@ /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_ts: stmpe_touchscreen { + stmpe_ts: touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -664,10 +663,9 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; - status = "disabled"; }; - stmpe_adc: stmpe_adc { + stmpe_adc: adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; /* forbid to use ADC channels 3-0 (touch) */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi index 7cc7ae195988..01d4ea20b13d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/imx6qdl-clock.h> @@ -150,6 +114,8 @@ reg = <0x58>; interrupt-parent = <&gpio1>; interrupts = <04 0x8>; + #interrupt-cells = <2>; + interrupt-controller; regulators { bcore1 { @@ -324,8 +290,9 @@ #address-cells = <1>; #size-cells = <0>; - ethphy: ethernet-phy { + ethphy: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi new file mode 100644 index 000000000000..d11bf911b728 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2025 Toradex */ + +&i2c2 { + /delete-node/ stmpe811@41; + + ad7879_ts: touchscreen@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio6>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + tla2024_adc: adc@49 { + compatible = "ti,tla2024"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Colibri AIN0 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN1 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <1>; + }; + + /* Colibri AIN3 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 9f33419c260b..8a0ce250e576 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -10,7 +10,6 @@ / { model = "Toradex Colibri iMX6DL/S Module"; - compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; aliases { mmc0 = &usdhc3; /* eMMC */ @@ -573,7 +572,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_ts: stmpe_touchscreen { + stmpe_ts: touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -588,10 +587,9 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; - status = "disabled"; }; - stmpe_adc: stmpe_adc { + stmpe_adc: adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 41d073f5bfe7..c504cf7e9492 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -118,7 +118,7 @@ pinctrl-0 = <&pinctrl_gpio_key>; pinctrl-names = "default"; - button_0 { + button-0 { label = "Button 0"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi-ch101olhlwh.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi-ch101olhlwh.dtsi new file mode 100644 index 000000000000..90259785126b --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi-ch101olhlwh.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx6qdl-dhcom-overlay-panel-dpi.dtsi" + +&{/} { + lvds-encoder { + compatible = "onnn,fin3385", "lvds-encoder"; + pclk-sample = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_bridge_in: endpoint { + remote-endpoint = <&ipu1_dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&display_bl { + pwms = <&pwm1 0 5000000 0>; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpio4>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <16384>; + touchscreen-size-y = <9600>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&ipu1_dpi0_out { + remote-endpoint = <&lvds_bridge_in>; +}; + +&panel { + compatible = "chefree,ch101olhlwh-002"; +}; + +&panel_in { + remote-endpoint = <&lvds_bridge_out>; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi.dtsi new file mode 100644 index 000000000000..48d346b6b484 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-overlay-panel-dpi.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pwm/pwm.h> + +&{/} { + display_bl: display-bl { + compatible = "pwm-backlight"; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + ipu1_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_dpi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel: panel { + backlight = <&display_bl>; + + port { + panel_in: endpoint { + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&ipu1_display_in>; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtso new file mode 100644 index 000000000000..a5cb77b351af --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-497-200-x12.dtso @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx6qdl-dhcom-overlay-panel-dpi.dtsi" + +&display_bl { + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; +}; + +&ipu1_dpi0_out { + remote-endpoint = <&panel_in>; +}; + +&panel { + compatible = "dataimage,scf0700c48ggu18"; +}; + +&panel_in { + remote-endpoint = <&ipu1_dpi0_out>; +}; + +&touch_som { /* TSC2004 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso new file mode 100644 index 000000000000..3e02031b74d0 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx6qdl-dhcom-overlay-panel-dpi-ch101olhlwh.dtsi" + +&{/} { + gpio-keys { + /* BUTTON1 GPIO-B conflicts with touchscreen reset */ + button-1 { + /* Use status as /delete-node/ does not work in DTOs */ + status = "disabled"; + }; + }; + + led { + /* LED7 GPIO-H conflicts with touchscreen IRQ */ + led-7 { + /* Use status as /delete-node/ does not work in DTOs */ + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtso new file mode 100644 index 000000000000..e8cae43f300d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x21.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@1 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <1>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtso new file mode 100644 index 000000000000..6fde50bcda71 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-531-100-x22.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <0>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtso new file mode 100644 index 000000000000..9f5814e7a04f --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2-overlay-560-200-x12.dtso @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx6qdl-dhcom-overlay-panel-dpi.dtsi" + +&display_bl { + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dhcom_e>; + /* Touchscreen IRQ GPIO-E conflicts with LED5 GPIO */ + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + }; +}; + +&ipu1_dpi0_out { + remote-endpoint = <&panel_in>; +}; + +&panel { + compatible = "edt,etm0700g0edh6"; +}; + +&panel_in { + remote-endpoint = <&ipu1_dpi0_out>; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso new file mode 100644 index 000000000000..5c380572c409 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx6qdl-dhcom-overlay-panel-dpi-ch101olhlwh.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi index af0d95396cd5..74dfb92f1514 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2015-2021 DH electronics GmbH - * Copyright (C) 2018 Marek Vasut <marex@denx.de> + * Copyright (C) 2015-2026 DH electronics GmbH + * Copyright (C) 2018-2026 Marek Vasut */ #include <dt-bindings/pwm/pwm.h> @@ -303,7 +303,7 @@ }; }; - touchscreen@49 { /* TSC2004 */ + touch_som: touchscreen@49 { /* TSC2004 */ compatible = "ti,tsc2004"; interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&pinctrl_tsc2004>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index 97763db3959f..9f4e746beb2d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -33,7 +33,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emcon_wake>; - wake { + key-wake { label = "Wake"; linux,code = <KEY_WAKEUP>; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; @@ -225,6 +225,8 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi index e75e1a5364b8..beff5a0f58ab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -156,6 +156,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -270,7 +271,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index b57f4073f881..9d3ba4083216 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,21 +53,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -230,6 +230,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -350,7 +351,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 090c0057d117..7e84e0a52ef3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,21 +53,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -223,6 +223,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -349,7 +350,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index 94f1d1ae59aa..81394d47dd68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -34,13 +34,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -54,21 +54,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -376,7 +376,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi index 29960d1cf6a0..6136a95b9259 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -68,13 +26,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -88,21 +46,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -221,6 +179,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -329,7 +288,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi index 77ae611b817a..9c822ca23130 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -45,21 +45,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -146,6 +146,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -260,7 +261,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index c6e231de674a..552114a69f5b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -66,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -86,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -184,6 +142,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -298,7 +257,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index d0f648938cae..e9d5bbb43145 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -92,13 +50,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -112,21 +70,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -296,6 +254,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -503,7 +462,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index 71911df881cc..01f77142e153 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -76,13 +34,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -96,21 +54,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -237,6 +195,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -401,7 +360,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_SOC (1+R1/R2 = 1.635) */ @@ -413,7 +371,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_soc>; }; /* VDD_1P0 (1+R1/R2 = 1.38): */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 716c324a7458..3df4d345da98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -78,13 +36,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -98,21 +56,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -302,6 +260,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi index 955a51226eda..87fdc9e2a727 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -156,6 +156,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -270,7 +271,7 @@ pagesize = <16>; }; - ds1672@68 { + rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi index 453dee4d9227..099ed2f94d61 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi @@ -27,13 +27,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -47,21 +47,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -165,6 +165,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi index add700bc11cc..cbca5e58e812 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -45,21 +45,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi index 82f47c295b08..4e4dce5adc15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -141,6 +141,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index 54d4bced2395..6b737360a532 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -332,7 +332,6 @@ }; &pwm2 { - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi index 8cefda70db63..74ccfe56828f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi @@ -124,7 +124,7 @@ compatible = "fsl,imx-audio-tlv320aic32x4"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&ssi1>; audio-codec = <&tlv320aic32x4>; audio-asrc = <&asrc>; @@ -206,6 +206,10 @@ }; }; +&gpio1 { + bootph-pre-ram; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi>; @@ -214,6 +218,8 @@ }; &i2c1 { + bootph-pre-ram; + tlv320aic32x4: audio-codec@18 { compatible = "ti,tlv320aic32x4"; reg = <0x18>; @@ -274,6 +280,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + bootph-pre-ram; status = "okay"; }; @@ -346,6 +353,7 @@ no-sdio; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + bootph-all; status = "okay"; }; @@ -354,6 +362,7 @@ pinctrl-0 = <&pinctrl_wdog1>; /* does not work on unmodified starter kit */ /* fsl,ext-reset-output; */ + bootph-pre-ram; status = "okay"; }; @@ -544,6 +553,7 @@ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099 >; + bootph-pre-ram; }; pinctrl_uart3: uart3grp { @@ -587,6 +597,7 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */ >; + bootph-all; }; pinctrl_usbotg: usbotggrp { @@ -602,5 +613,6 @@ /* Watchdog out */ MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099 >; + bootph-pre-ram; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index 8ee65f9858c0..610b2a72fe82 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -57,13 +57,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - home { + key-home { label = "Home"; gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; linux,code = <102>; }; - back { + key-back { label = "Back"; gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; linux,code = <158>; @@ -127,6 +127,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index 43d474bbf55d..ef0c26688446 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -86,45 +86,45 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; }; - i2c2mux { + i2c-mux-2 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2mux>; @@ -135,20 +135,20 @@ i2c-parent = <&i2c2>; idle-state = <0>; - i2c2mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; - i2c2mux@2 { + i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; }; - i2c3mux { + i2c-mux-3 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3mux>; @@ -158,7 +158,7 @@ i2c-parent = <&i2c3>; idle-state = <0>; - i2c3mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -237,6 +237,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -248,6 +249,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -259,6 +261,7 @@ panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 8e64314fa8b2..03fe053880ca 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -47,38 +47,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -114,6 +114,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -125,6 +126,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -136,6 +138,7 @@ panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index 8a0bfc387a59..6a353a99e13d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -80,38 +80,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -179,6 +179,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -190,6 +191,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi index 037b60197598..fc78acc9f5c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi @@ -13,14 +13,14 @@ pinctrl-0 = <&pinctrl_gpio_keys>; status = "disabled"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; wakeup-source; }; - sleep { + key-sleep { label = "Sleep Button"; gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_SLEEP>; @@ -35,19 +35,19 @@ user-led1 { gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led2 { gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led3 { gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 0b4c09b09c03..a3c2811e9c6f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -162,7 +162,7 @@ interrupts = <12 IRQ_TYPE_NONE>; status = "disabled"; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi index 64ded5e5559c..22d5918ee4d8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi @@ -23,7 +23,6 @@ reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "usbh1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -33,7 +32,6 @@ reg_usb_otg_vbus: regulator-otg-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index a381cb224c1e..b9dde0af3b99 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -32,35 +32,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - home { + key-home { label = "Home"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; wakeup-source; }; - program { + key-program { label = "Program"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROGRAM>; wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -854,7 +854,7 @@ ranges = <0 0 0x08000000 0x08000000>; status = "disabled"; /* pin conflict with SPI NOR */ - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x02000000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi index bdef7e642d3c..3b7d01065e87 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/media/video-interfaces.h> / { chosen { @@ -108,38 +109,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -207,6 +208,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -218,6 +220,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -360,7 +363,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "xclk"; reg = <0x42>; reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -370,6 +372,7 @@ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index 960e83f5e904..ba29720e3f72 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/media/video-interfaces.h> / { chosen { @@ -17,6 +18,13 @@ reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -71,21 +79,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_POWER>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; @@ -139,6 +147,7 @@ panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -278,7 +287,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; reg = <0x3c>; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 @@ -291,6 +299,7 @@ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi index 6823a639ed2f..2daf2b6af884 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi @@ -58,7 +58,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; label = "Power Button"; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi index 6ab71a729fd8..e2631db798a8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -69,7 +69,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; interrupt-parent = <&gpio3>; - interrupt = <30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; reg = <0>; @@ -238,8 +238,8 @@ }; &clks { - clocks = <&clk50m_phy>; - clock-names = "enet_ref_pad"; + clocks = <&osc>, <&ckil>, <&ckih1>, <&anaclk1>, <&anaclk2>, <&clk50m_phy>; + clock-names = "osc", "ckil", "ckih1", "anaclk1", "anaclk2", "enet_ref_pad"; assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clk50m_phy>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi index cd1e682f11ad..8192344d5294 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi @@ -41,6 +41,12 @@ #include <dt-bindings/gpio/gpio.h> / { + clk32k: clock-32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + nvcc_sd1: regulator-nvcc-sd1 { compatible = "regulator-fixed"; regulator-always-on; @@ -58,7 +64,7 @@ */ compatible = "gpio-gate-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + clocks = <&clk32k>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_ti_clk>; enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi index 6152a9ed4768..14676d1d905a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi @@ -7,32 +7,33 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -/ { - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "supply-3p3v"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + bootph-pre-ram; status = "okay"; m25p80: flash@0 { compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; + spi-max-frequency = <50000000>; + vcc-supply = <&sw4_reg>; m25p,fast-read; + bootph-pre-ram; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; +&gpio3 { + bootph-pre-ram; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < @@ -43,6 +44,7 @@ /* eCSPI1 SS1 */ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099 >; + bootph-pre-ram; }; pinctrl_i2c1: i2c1grp { @@ -50,6 +52,7 @@ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 >; + bootph-pre-ram; }; pinctrl_i2c1_recovery: i2c1recoverygrp { @@ -78,6 +81,7 @@ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; + bootph-all; }; }; @@ -119,9 +123,10 @@ }; sw4_reg: sw4 { - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + bootph-pre-ram; }; reg_5v_600mA: swbst { @@ -183,7 +188,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&sw4_reg>; non-removable; disable-wp; no-sd; @@ -191,6 +196,7 @@ bus-width = <8>; #address-cells = <1>; #size-cells = <0>; + bootph-all; status = "okay"; mmccard: mmccard@0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi index 828996382f24..67f8f59aff5a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi @@ -20,6 +20,7 @@ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; + bootph-pre-ram; status = "okay"; pmic: pmic@8 { @@ -27,17 +28,17 @@ reg = <0x08>; }; - temperature-sensor@48 { + lm75_48: temperature-sensor@48 { compatible = "national,lm75a"; reg = <0x48>; - vs-supply = <®_3p3v>; + vs-supply = <&sw4_reg>; }; - eeprom@50 { + m24c64_50: eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; - vcc-supply = <®_3p3v>; + vcc-supply = <&sw4_reg>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi index 1d0966b8d99e..db552802554d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi @@ -13,6 +13,7 @@ scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; + bootph-pre-ram; status = "okay"; pmic: pmic@8 { @@ -20,17 +21,17 @@ reg = <0x08>; }; - temperature-sensor@48 { + lm75_48: temperature-sensor@48 { compatible = "national,lm75a"; reg = <0x48>; - vs-supply = <®_3p3v>; + vs-supply = <&sw4_reg>; }; - eeprom@50 { + m24c64_50: eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; - vcc-supply = <®_3p3v>; + vcc-supply = <&sw4_reg>; }; }; @@ -40,6 +41,7 @@ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 >; + bootph-pre-ram; }; pinctrl_i2c3_recovery: i2c3recoverygrp { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi index f88da757edda..948b612496a5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi @@ -140,7 +140,7 @@ reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <32>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi index 11c70431feec..17f6a568f0e8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi @@ -213,12 +213,12 @@ status = "okay"; m41t00s: rtc@68 { - compatible = "m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; isl12022: rtc@6f { - compatible = "isl,isl12022"; + compatible = "isil,isl12022"; reg = <0x6f>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi index 77594546ef37..cdeaca36867e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi index 4eb53d5677a6..63d09c01a3c6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi index bae7313d729d..8232f4ea2752 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { @@ -52,16 +16,19 @@ lcd-panel { compatible = "edt,et057090dhu"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds0-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds1-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index 2fa37d1b16cc..57297d6521cf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -80,7 +44,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi index 2bff5f92242a..fef34ce961d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi @@ -9,9 +9,6 @@ * Copyright 2022 Bootlin */ -/dts-v1/; - -#include "imx6q.dtsi" #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/sound/fsl-imx-audmux.h> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi index 96e4f4b0b248..de2b12dad7d8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi @@ -429,7 +429,6 @@ }; &usbh1 { - pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; disable-over-current; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index 45bcfd7faf9d..4dc2c410cf61 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -54,23 +54,35 @@ }; clocks { - ckil { + ckil: ckil { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; - ckih1 { + ckih1: ckih1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; - osc { + osc: osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; + + anaclk1: anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + anaclk2: anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; ldb: ldb { @@ -149,6 +161,7 @@ compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; + bootph-all; dma_apbh: dma-controller@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; @@ -166,6 +179,8 @@ compatible = "fsl,imx6q-gpmi-nand"; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bch"; clocks = <&clks IMX6QDL_CLK_GPMI_IO>, @@ -295,6 +310,7 @@ #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; + bootph-pre-ram; spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -302,6 +318,7 @@ #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; + bootph-pre-ram; spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; @@ -875,6 +892,7 @@ gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + #address-cells = <0>; interrupt-controller; #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; @@ -917,6 +935,7 @@ iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x20e0000 0x4000>; + bootph-pre-ram; }; dcic1: dcic@20e4000 { @@ -947,6 +966,7 @@ #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; + bootph-pre-ram; crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; @@ -1317,6 +1337,7 @@ <&clks IMX6QDL_CLK_IPU1_DI1>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; + bootph-all; ipu1_csi0: port@0 { reg = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts index fbe260c9872e..cad985e341a1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts @@ -384,7 +384,7 @@ #address-cells = <1>; #size-cells = <0>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts index 92b38e6699aa..3183abdd25aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts index ffc0f2ee11d2..174824a8138e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts index 07ad70718aec..31854bc52e76 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts index dd494d587014..dfe1535128fe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts index 4a961a33bf2d..770a85e0561c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts @@ -17,6 +17,10 @@ }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts index 56040da0bd25..4c655579f43e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts @@ -37,6 +37,16 @@ stdout-path = &uart1; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -84,7 +94,7 @@ led-1 { label = "tolinoshine2hd:white:backlightboost"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; }; @@ -147,8 +157,35 @@ touchscreen-inverted-x; }; - /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + tps65185: pmic@68 { + compatible = "ti,tps65185"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65185_gpio>; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + vin-supply = <&epd_pmic_supply>; + pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vcom-ctrl-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + + regulators { + vcom_reg: vcom { + regulator-name = "vcom"; + }; + + vposneg_reg: vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + }; + v3p3_reg: v3p3 { + regulator-name = "v3p3"; + }; + }; + }; }; &i2c3 { @@ -328,6 +365,12 @@ >; }; + pinctrl_epd_pmic_supply: epdc-pmic-supplygrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x40010059 /* pwrall */ + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 @@ -425,6 +468,16 @@ >; }; + pinctrl_tps65185_gpio: tps65185-gpio-grp { + fsl,pins = < + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* vcom_ctrl */ + MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x40010059 /* wakeup */ + MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x40010059 /* enable */ + MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x17059 /* nINT */ + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059 /* pwr-good */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts index 5ba6f15e9ed5..58b9ccd9b605 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts @@ -26,6 +26,11 @@ compatible = "kobo,tolino-shine3", "fsl,imx6sl"; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -59,6 +64,12 @@ >; }; + pinctrl_epd_pmic_supply: epdc-pmic-supplygrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */ @@ -159,6 +170,16 @@ >; }; + pinctrl_tps65185_gpio: tps65185-gpio-grp { + fsl,pins = < + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* vcom_ctrl */ + MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x40010059 /* wakeup */ + MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x40010059 /* enable */ + MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x17059 /* nINT */ + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059 /* pwr-good */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 @@ -308,6 +329,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&tps65185 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65185_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts index 2694fe18a91b..7cda1f21e418 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts @@ -227,7 +227,6 @@ }; &usbotg1 { - pinctrl-names = "default"; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts index a2534c422a52..f8709a952409 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts @@ -26,6 +26,11 @@ compatible = "kobo,tolino-vision5", "fsl,imx6sl"; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -59,6 +64,12 @@ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -159,6 +170,14 @@ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 @@ -329,6 +348,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi index 7381fb7f8912..13b0474aa42c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi @@ -776,7 +776,7 @@ }; lcdif: lcdif@20f8000 { - compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6sl-lcdif", "fsl,imx6sx-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts index f81aeacf5142..f5e88764a08c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts @@ -16,8 +16,67 @@ / { model = "Kobo Clara 2E"; compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll"; + + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; }; &i2c2 { - /* EPD PMIC JD9930 at 0x18 */ + jd9930: pmic@18 { + compatible = "fitipower,jd9930", "fitipower,fp9931"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_jd9930_gpio>; + vin-supply = <&epd_pmic_supply>; + pg-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + en-ts-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + fitipower,tdly-ms = <2 2 2 2>; + + regulators { + vcom_reg: vcom { + regulator-name = "vcom"; + /* + * For optimal performance these should be + * tuned on a per batch basis e.g. using + * overlays. + */ + regulator-min-microvolt = <2352840>; + regulator-max-microvolt = <2352840>; + }; + + vposneg_reg: vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15060000>; + regulator-max-microvolt = <15060000>; + }; + + v3p3_reg: v3p3 { + regulator-name = "v3p3"; + }; + }; + }; +}; + +&iomuxc { + pinctrl_jd9930_gpio: jd9930-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x17059 /* PG */ + MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x40010059 /* EN_TS */ + >; + }; + + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 + >; + }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts index 18c9ac8f7560..1000ee8b807a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts @@ -36,6 +36,11 @@ soc-supply = <&dcdc1_reg>; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -69,6 +74,12 @@ >; }; + pinctrl_epd_pmic_supply: epdc-pmic-supplygrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ @@ -169,6 +180,16 @@ >; }; + pinctrl_tps65185_gpio: tps65185-gpio-grp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* vcom_ctrl */ + MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x40010059 /* wakeup */ + MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* enable */ + MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x17059 /* nINT */ + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x17059 /* pwr-good */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 @@ -310,6 +331,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&tps65185 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65185_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts index 660620d226f7..19bbe60331b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts @@ -36,6 +36,11 @@ soc-supply = <&dcdc1_reg>; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -69,6 +74,12 @@ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -169,6 +180,14 @@ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 @@ -319,6 +338,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi index 8c5ca4f9b87f..c96669605d1d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi @@ -309,7 +309,7 @@ reg = <0x02034000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; - dma-name = "rx", "tx"; + dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART3_IPG>, <&clks IMX6SLL_CLK_UART3_SERIAL>; clock-names = "ipg", "per"; @@ -657,7 +657,7 @@ }; lcdif: lcd-controller@20f8000 { - compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6sll-lcdif", "fsl,imx6sx-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 67cf09e63a63..3e238d8118fa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -33,14 +33,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -119,7 +119,7 @@ regulator-always-on; }; - reg_pcie_gpio: regulator-pcie-gpio { + reg_pcie_gpio: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index 5132b575b001..aefae5a3a6be 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -224,7 +224,7 @@ gpmi: nand-controller@1806000 { compatible = "fsl,imx6sx-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x01806000 0x2000>, <0x01808000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -1304,7 +1304,7 @@ }; lcdif1: lcdif@2220000 { - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6sx-lcdif"; reg = <0x02220000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, @@ -1325,7 +1325,7 @@ }; lcdif2: lcdif@2224000 { - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6sx-lcdif"; reg = <0x02224000 0x4000>; interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 0e839bbfea08..3d147b160ecf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -22,6 +22,33 @@ status = "okay"; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-fixed"; @@ -62,6 +89,33 @@ gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; }; + reg_audio_5v: regulator-audio-pwr { + compatible = "regulator-fixed"; + regulator-name = "audio-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sound-wm8960 { compatible = "fsl,imx-audio-wm8960"; model = "wm8960-audio"; @@ -110,6 +164,7 @@ panel { compatible = "innolux,at043tn24"; backlight = <&backlight_display>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -139,6 +194,11 @@ wlf,gpio-cfg = <1 3>; clocks = <&clks IMX6UL_CLK_SAI2>; clock-names = "mclk"; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; }; camera@3c { @@ -150,6 +210,9 @@ clock-names = "xclk"; powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; port { ov5640_to_parallel: endpoint { @@ -389,8 +452,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_camera_clock: cameraclockgrp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi index f2386dcb9ff2..dda4fa91b2f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi @@ -40,6 +40,9 @@ reg = <1>; interrupt-parent = <&gpio4>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi index 4c09bb312696..e34c8cbe36ae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi @@ -122,15 +122,21 @@ VDDD-supply = <®_1p8v>; }; - stmpe811: gpio-expander@44 { + gpio-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; stmpe: touchscreen { compatible = "st,stmpe-ts"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi index 29d2f86d5e34..f4c45e964daf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi @@ -168,7 +168,6 @@ pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; rs485-rx-during-tx; - rs485-rts-active-low; uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi index dcf88f610346..4c0ac4d4df68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi @@ -26,8 +26,29 @@ flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; - spi-max-frequency = <50000000>; reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0xf0000>; + label = "u-boot"; + }; + + partition@f0000 { + reg = <0xf0000 0x8000>; + label = "env"; + }; + + partition@f8000 { + reg = <0xf8000 0x8000>; + label = "env_redundant"; + }; + }; }; }; @@ -61,7 +82,7 @@ pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi index ec042648bd98..c6064f4c679b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi @@ -61,7 +61,7 @@ wakeup-source; status = "disabled"; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi index 2f3fd32a1167..113485e3397a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi @@ -8,12 +8,12 @@ / { gpio_keys: gpio-keys { - compatible = "gpio-key"; + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; status = "disabled"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -29,13 +29,13 @@ user-led1 { gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led2 { gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts index fb206c1d8aca..fbab126f95b9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts @@ -49,5 +49,7 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi index fe307f49b9e5..9fa5225994e3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi @@ -76,6 +76,7 @@ panel { compatible = "vxt,vl050-8048nt-c01"; backlight = <&backlight>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi index c9c0794f01a2..4fa98e6a66d7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi @@ -26,6 +26,7 @@ pinctrl-1 = <&pinctrl_i2c4_recovery>; scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + bootph-pre-ram; status = "okay"; pfuze3000: pmic@8 { @@ -140,9 +141,14 @@ }; }; +&gpio1 { + bootph-pre-ram; +}; + &gpio4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; + bootph-pre-ram; /* * PMIC & temperature sensor IRQ @@ -159,16 +165,23 @@ &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; + bootph-pre-ram; status = "okay"; flash0: flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; + reg = <0>; spi-max-frequency = <33000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; - reg = <0>; + vcc-supply = <®_vldo4>; + bootph-pre-ram; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; @@ -184,6 +197,7 @@ non-removable; no-sdio; no-sd; + bootph-all; status = "okay"; }; @@ -207,5 +221,6 @@ /* PMIC irq */ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 >; + bootph-pre-ram; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts index f2a5f17f312e..2e7b96e7b791 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts @@ -6,8 +6,9 @@ /dts-v1/; -#include "imx6ul-tqma6ul1.dtsi" +#include "imx6ul-tqma6ul2.dtsi" #include "mba6ulx.dtsi" +#include "imx6ul-tqma6ul1.dtsi" / { model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi index 24192d012ef7..79c8c5529135 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi @@ -4,8 +4,6 @@ * Author: Markus Niebel <Markus.Niebel@tq-group.com> */ -#include "imx6ul-tqma6ul2.dtsi" - / { model = "TQ-Systems TQMa6UL1 SoM"; compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi index e2e95dd92263..f81cd09fe0c7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi @@ -33,6 +33,7 @@ /* rst */ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 >; + bootph-all; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts index 9d9b6b744a1c..9d637c0a12ec 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* - * Copyright 2018-2022 TQ Systems GmbH + * Copyright 2018-2022 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> */ @@ -10,6 +10,6 @@ #include "mba6ulx.dtsi" / { - model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board"; + model = "TQ-Systems TQMa6UL2L SoM on MBa6ULx board"; compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi index 4b87e2dc70dc..11c8f1af4173 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi @@ -33,6 +33,7 @@ /* rst */ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 >; + bootph-all; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi index 5afb9046c202..5c90d0a3ee2e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi @@ -39,5 +39,6 @@ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 >; + bootph-pre-ram; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi index ba84a4f70ebd..133961ee7283 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi @@ -44,5 +44,6 @@ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9 MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 >; + bootph-pre-ram; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts index 8c2f3df79b47..188f3a2a312f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts index d82698e7d50f..247a0aab7791 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts index 20c810a81403..84b45542814e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 278120404d31..1992dfb53b45 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -108,7 +72,7 @@ default-brightness-level = <50>; }; - i2c_gpio: i2c-gpio { + i2c_gpio: i2c { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -282,7 +246,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -298,6 +261,11 @@ pinctrl-0 = <&pinctrl_etnphy0_int>; interrupt-parent = <&gpio5>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; + /* Energy detect sometimes causes link failures */ + smsc,disable-energy-detect; status = "okay"; }; @@ -308,6 +276,9 @@ pinctrl-0 = <&pinctrl_etnphy1_int>; interrupt-parent = <&gpio4>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; status = "okay"; }; }; @@ -317,7 +288,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts new file mode 100644 index 000000000000..9ff3b374a2b3 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL + * Variscite SoM mounted on it + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +#include "imx6ul-var-som.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Variscite VAR-SOM-MX6UL Concerto Board"; + compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>; + + key-back { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + key-wakeup { + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "gpled2"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&fec1 { + status = "disabled"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <0>; + micrel,rmii-reference-clock-select-25-mhz = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + rtc@68 { + /* + * To actually use this interrupt + * connect pins J14.8 & J14.10 on the Concerto-Board. + */ + compatible = "dallas,ds1337"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_enet2_gpio: enet2-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* fec2 reset */ + >; + }; + + pinctrl_enet2_mdio: enet2-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_gpio_key_back: gpio-key-backgrp { + fsl,pins = < + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x17059 + >; + }; + + pinctrl_gpio_leds: gpio-ledsgrp { + fsl,pins = < + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x1b0b0 /* GPLED2 */ + >; + }; + + pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x1b0b0 /* RTC alarm IRQ */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1-gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */ + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x78b0 + >; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&tsc { + /* + * Conflics with wdog1 ext-reset-output & SD CD pins, + * so we keep it disabled by default. + */ + status = "disabled"; +}; + +/* Console UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* ttymxc4 UART */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + /* + * To actually use ext-reset-output + * connect pins J17.3 & J17.8 on the Concerto-Board + */ + fsl,ext-reset-output; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi new file mode 100644 index 000000000000..4e536e0252de --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite VAR-SOM-MX6UL Module + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +/dts-v1/; + +#include "imx6ul.dtsi" +#include <dt-bindings/clock/imx6ul-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Variscite VAR-SOM-MX6UL module"; + compatible = "variscite,var-som-imx6ul", "fsl,imx6ul"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_gpio_dvfs: reg-gpio-dvfs { + compatible = "regulator-gpio"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + regulator-name = "gpio_dvfs"; + regulator-type = "voltage"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + states = <1300000 0x1 + 1400000 0x0>; + }; + + rmii_ref_clk: rmii-ref-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "rmii-ref"; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&cpu0 { + dc-supply = <®_gpio_dvfs>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <1>; + micrel,rmii-reference-clock-select-25-mhz = <1>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet1_gpio: enet1-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* fec1 reset */ + >; + }; + + pinctrl_enet1_mdio: enet1-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT Enable */ + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x03029 /* WLAN Enable */ + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; + +&pxp { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 6de224dd2bb9..24541fdf49ce 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -115,6 +115,7 @@ #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "osc"; + bootph-pre-ram; }; ipp_di0: clock-di0 { @@ -143,6 +144,7 @@ compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; + bootph-pre-ram; ocram: sram@900000 { compatible = "mmio-sram"; @@ -202,6 +204,7 @@ #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; + bootph-pre-ram; spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -209,6 +212,7 @@ #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; + bootph-pre-ram; ecspi1: spi@2008000 { #address-cells = <1>; @@ -339,7 +343,7 @@ #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02030000 0x4000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_SAI3_IPG>, <&clks IMX6UL_CLK_SAI3>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; @@ -580,6 +584,7 @@ #clock-cells = <1>; clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + bootph-pre-ram; }; anatop: anatop@20c8000 { @@ -745,6 +750,7 @@ iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; + bootph-pre-ram; }; gpr: iomuxc-gpr@20e4000 { @@ -826,6 +832,7 @@ #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; + bootph-pre-ram; crypto: crypto@2140000 { compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi index de4dc7c1a03a..e75dad0f0e23 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi @@ -13,7 +13,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - power { + key-power { label = "Wake-Up"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi index f52f8b5ad8a6..bce6fbf230b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi @@ -13,7 +13,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - power { + key-power { label = "Wake-Up"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts index b29713831a74..04e570d76e42 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts @@ -199,7 +199,7 @@ reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - power-supply = <®_panel_3v3>; + vcc-supply = <®_panel_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi index 75486e1b0c15..a0adcd3fe122 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi @@ -201,7 +201,7 @@ * the speed can be increased accordingly. */ bluetooth: bluetooth { - compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */ + compatible = "brcm,bcm4329-bt"; /* muRata 1DX or 1YN */ max-speed = <3000000>; vbat-supply = <&vcc_3v3>; vddio-supply = <&vcc_3v3>; @@ -222,7 +222,7 @@ status = "okay"; brcmf: wifi@1 { - compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */ + compatible = "brcm,bcm4329-fmac"; /* muRata 1DX or 1YN */ reg = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts new file mode 100644 index 000000000000..f251a1028355 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-bmm", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL BMM Board"; + + backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <85>; + pwms = <&pwm8 0 100000 0>; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm4 0 1000000 0>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ext_pwr: regulator-ext-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ext_pwr>; + regulator-name = "ext-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mclk>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6UL_CLK_CKO>; + assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>, + <&clks IMX6UL_CLK_CKO>; + assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + measure-delay-time = <0x9ffff>; + pre-charge-time = <0xfff>; + debounce-delay-us = <62>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: can-grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x11008 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x000b0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x000b0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x000b0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x000b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_reg_ext_pwr: reg-ext-pwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts new file mode 100644 index 000000000000..d500f8839102 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-gtw", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL GTW Board"; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>; + + led-0 { + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-1 { + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x130b0 + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x130b0 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_pwrled: ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x130b0 + >; + }; + + pinctrl_usb_hub: usb_hubgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts new file mode 100644 index 000000000000..540642e99a41 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-rmm", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL BMM Board"; + + backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <85>; + pwms = <&pwm8 0 100000 0>; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm4 0 1000000 0>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ext_pwr: regulator-ext-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ext_pwr>; + regulator-name = "ext-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + status = "okay"; + }; + + led-1 { + gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + status = "okay"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + touchscreen: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + report-rate-hz = <60>; + /* settings valid only for Hycon touchscreen */ + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mclk>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6UL_CLK_CKO>; + assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>, + <&clks IMX6UL_CLK_CKO>; + assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + disable-over-current; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: can-grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x130b0 + >; + }; + + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_touchscreen: touchgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x17059 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_reg_ext_pwr: reg-ext-pwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi new file mode 100644 index 000000000000..43518bf07602 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + + #include "imx6ull.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull", "fsl,imx6ull"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +/* NAND */ +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <0>; + nand-ecc-step-size = <0>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_phy_reset: phy-resetgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi index d12fb44aeb14..6fd68970c0b4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi @@ -15,7 +15,7 @@ }; gpio_keys: gpio-keys { - compatible = "gpio-key"; + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -79,13 +79,13 @@ user-led1 { label = "yellow"; gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; user-led2 { label = "red"; gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; }; }; @@ -126,7 +126,7 @@ s25fl064: flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = " jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <2>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi index 8541cb3f3b3e..1224ef132439 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi @@ -38,6 +38,7 @@ /* rst */ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 >; + bootph-all; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts index 33437aae9822..5676904820a9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts @@ -10,6 +10,6 @@ #include "mba6ulx.dtsi" / { - model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board"; + model = "TQ-Systems TQMa6ULL2L SoM on MBa6ULx board"; compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi index be593d47e3b1..ac18caf5a76c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi @@ -9,7 +9,7 @@ #include "imx6ul-tqma6ulxl-common.dtsi" / { - model = "TQ Systems TQMa6ULL2L SoM"; + model = "TQ-Systems TQMa6ULL2L SoM"; compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; }; @@ -38,6 +38,7 @@ /* rst */ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 >; + bootph-all; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi index db0c339022ac..ba0ea10c7b74 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi @@ -57,6 +57,7 @@ #size-cells = <1>; reg = <0x02200000 0x100000>; ranges; + bootph-pre-ram; dcp: crypto@2280000 { compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts index 6159ed70d966..2d9f495660c9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts @@ -33,6 +33,10 @@ status = "okay"; }; +&uart2 { + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi index 576a7df505d3..4192adb27223 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi @@ -170,7 +170,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; audio-routing = @@ -287,6 +287,15 @@ status = "okay"; }; +&gpio4 { + /* Deassert BOOT_EN after boot to separate BOOT_CFG circuits from LCD signals */ + boot-en-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + }; +}; + &i2c1 { lm75: temperature-sensor@49 { compatible = "national,lm75a"; @@ -477,6 +486,7 @@ }; pinctrl_uart6: uart6grp { + bootph-pre-ram; fsl,pins = <MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d>, <MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75>, @@ -511,6 +521,7 @@ <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e>, <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e>, <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e>; + bootph-pre-ram; }; pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp { @@ -602,6 +613,7 @@ pinctrl-0 = <&pinctrl_uart6>; assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + bootph-pre-ram; status = "okay"; }; @@ -646,6 +658,7 @@ no-1-8-v; no-sdio; no-mmc; + bootph-pre-ram; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index aa8f65cd4adf..f3d7a2d0cb7b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -193,6 +193,7 @@ <MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11>, <MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54>, <MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54>; + bootph-pre-ram; }; pinctrl_qspi_reset: qspi_resetgrp { @@ -214,6 +215,7 @@ <MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59>, <MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59>, <MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19>; + bootph-pre-ram; }; pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp { @@ -257,6 +259,7 @@ &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>; + bootph-pre-ram; status = "okay"; flash0: flash@0 { @@ -265,6 +268,14 @@ spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <&vgen4_reg>; + bootph-pre-ram; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; @@ -281,6 +292,7 @@ no-sdio; vmmc-supply = <&vgen4_reg>; vqmmc-supply = <&sw2_reg>; + bootph-pre-ram; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 7ee66be8bccb..2192f105ec81 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -35,6 +35,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -61,6 +62,13 @@ enable-active-high; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_can2_3v3: regulator-can2-3v3 { compatible = "regulator-fixed"; regulator-name = "can2-3v3"; @@ -270,7 +278,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touch@48 { + touchscreen@48 { compatible = "ti,tsc2004"; reg = <0x48>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 1b965652291b..347dd0fe4f82 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -49,6 +49,8 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts index eec526a96311..ff9d50942884 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts @@ -374,7 +374,7 @@ cap-power-off-card; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index 6cde84636900..a370e868cafe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -143,6 +143,33 @@ gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; }; + reg_audio_5v: regulator-audio-pwr { + compatible = "regulator-fixed"; + regulator-name = "audio-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_audio_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; @@ -379,6 +406,8 @@ mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_audio_3v3>; + vddio-supply = <®_audio_3v3>; }; }; @@ -406,6 +435,11 @@ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; assigned-clock-rates = <0>, <884736000>, <12288000>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi index 0484e349e064..d961c61a93af 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi @@ -48,7 +48,7 @@ opp-792000000 { opp-hz = /bits/ 64 <792000000>; - opp-microvolt = <1000000>; + opp-microvolt = <1000000 950000 1250000>; clock-latency-ns = <150000>; opp-supported-hw = <0xd>, <0x7>; opp-suspend; @@ -56,7 +56,7 @@ opp-996000000 { opp-hz = /bits/ 64 <996000000>; - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1045000 1250000>; clock-latency-ns = <150000>; opp-supported-hw = <0xc>, <0x7>; opp-suspend; @@ -64,7 +64,7 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1225000>; + opp-microvolt = <1225000 1200000 1250000>; clock-latency-ns = <150000>; opp-supported-hw = <0x8>, <0x3>; opp-suspend; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index af4acc311572..25f38acc5350 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -23,7 +23,7 @@ pinctrl-0 = <&pinctrl_gpio>; autorepeat; - back { + key-back { label = "Back"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; @@ -31,28 +31,11 @@ }; }; - reg_brcm: regulator-brcm { + reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; + regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; }; reg_peri_3p15v: regulator-peri-3p15v { @@ -63,6 +46,14 @@ regulator-always-on; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -208,8 +199,6 @@ port { ov2680_to_mipi: endpoint { remote-endpoint = <&mipi_from_sensor>; - clock-lanes = <0>; - data-lanes = <1>; link-frequencies = /bits/ 64 <330000000>; }; }; @@ -244,6 +233,8 @@ mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; @@ -288,6 +279,14 @@ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; }; &uart6 { @@ -305,14 +304,21 @@ }; &usdhc1 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; keep-power-in-suspend; no-1-8-v; non-removable; - vmmc-supply = <®_brcm>; + mmc-pwrseq = <&sdio_pwrseq>; status = "okay"; + + wifi@0 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <0>; + }; }; &usdhc3 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 22dd72499ef2..5c9be24ba7c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -73,7 +73,6 @@ device_type = "cpu"; reg = <0>; clock-frequency = <792000000>; - clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; cpu-idle-states = <&cpu_sleep_wait>; operating-points-v2 = <&cpu0_opp_table>; @@ -176,12 +175,41 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; + bootph-pre-ram; ocram: sram@900000 { compatible = "mmio-sram"; @@ -344,6 +372,7 @@ #size-cells = <1>; reg = <0x30000000 0x400000>; ranges; + bootph-pre-ram; gpio1: gpio@30200000 { compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; @@ -516,6 +545,7 @@ iomuxc: pinctrl@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; + bootph-pre-ram; }; gpr: iomuxc-gpr@30340000 { @@ -529,34 +559,6 @@ #mux-control-cells = <1>; mux-reg-masks = <0x14 0x00000010>; }; - - video_mux: csi-mux { - compatible = "video-mux"; - mux-controls = <&mux 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - csi_mux_from_mipi_vc0: endpoint { - remote-endpoint = <&mipi_vc0_to_csi_mux>; - }; - }; - - port@2 { - reg = <2>; - - csi_mux_to_csi: endpoint { - remote-endpoint = <&csi_from_csi_mux>; - }; - }; - }; }; ocotp: efuse@30350000 { @@ -713,6 +715,7 @@ #size-cells = <1>; reg = <0x30400000 0x400000>; ranges; + bootph-pre-ram; adc1: adc@30610000 { compatible = "fsl,imx7d-adc"; @@ -903,6 +906,7 @@ #size-cells = <1>; reg = <0x30800000 0x400000>; ranges; + bootph-pre-ram; spba-bus@30800000 { compatible = "fsl,spba-bus", "simple-bus"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts index eff51e113db4..88d7dc005fa0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts @@ -92,7 +92,6 @@ IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 >; - bias-pull-up; }; pinctrl_pwm0: pwm0grp { diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi index 3c6ef7bfba60..1355feda1aa7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi @@ -41,6 +41,34 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; + clocks = <&smc1 IMX7ULP_CLK_ARM>, + <&scg1 IMX7ULP_CLK_CORE>, + <&scg1 IMX7ULP_CLK_SYS_SEL>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE>, + <&scg1 IMX7ULP_CLK_HSRUN_SYS_SEL>, + <&scg1 IMX7ULP_CLK_FIRC>; + clock-names = "arm", "core", "scs_sel", + "hsrun_core", "hsrun_scs_sel", + "firc"; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-500210000 { + opp-hz = /bits/ 64 <500210000>; + opp-microvolt = <1025000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1125000>; + clock-latency-ns = <150000>; }; }; @@ -399,6 +427,7 @@ <&pcc3 IMX7ULP_CLK_PCTLC>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 0 20>; + ngpios = <20>; }; gpio_ptd: gpio@40af0000 { @@ -413,6 +442,7 @@ <&pcc3 IMX7ULP_CLK_PCTLD>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 32 12>; + ngpios = <12>; }; gpio_pte: gpio@40b00000 { @@ -427,6 +457,7 @@ <&pcc3 IMX7ULP_CLK_PCTLE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 64 16>; + ngpios = <16>; }; gpio_ptf: gpio@40b10000 { @@ -441,6 +472,7 @@ <&pcc3 IMX7ULP_CLK_PCTLF>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 96 20>; + ngpios = <20>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 941d9860218e..1fda60d62ffe 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -95,6 +95,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + bootph-pre-ram; }; reg_mba6ul_5v0: regulator-mba6ul-5v0 { @@ -142,10 +143,17 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; audio-asrc = <&asrc>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; @@ -329,6 +337,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + bootph-pre-ram; status = "okay"; }; @@ -385,6 +394,7 @@ no-1-8-v; no-mmc; no-sdio; + bootph-all; status = "okay"; }; @@ -392,6 +402,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; fsl,ext-reset-output; + bootph-pre-ram; status = "okay"; }; @@ -487,6 +498,7 @@ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 >; + bootph-pre-ram; }; pinctrl_uart3: uart3grp { @@ -535,6 +547,7 @@ /* CD */ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 >; + bootph-all; }; pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi index 6dd73290f0c6..152e98cf0c4e 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi @@ -100,23 +100,25 @@ memcpy-bus-width = <32>; }; - spifi: flash-controller@40003000 { + spifi: spi@40003000 { compatible = "nxp,lpc1773-spifi"; reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; reg-names = "spifi", "flash"; interrupts = <30>; clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; clock-names = "spifi", "reg"; + #address-cells = <1>; + #size-cells = <0>; resets = <&rgu 53>; status = "disabled"; }; - mmcsd: mmcsd@40004000 { + mmcsd: mmc@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; interrupts = <6>; - clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; - clock-names = "ciu", "biu"; + clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>; + clock-names = "biu", "ciu"; resets = <&rgu 20>; status = "disabled"; }; @@ -535,3 +537,7 @@ }; }; }; + +&nvic { + arm,num-irq-priority-bits = <3>; +}; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts index 63c6f17bb7c9..837a3cfa8e7c 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts @@ -27,55 +27,55 @@ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; - key1 { + key-1 { label = "KEY1"; linux,code = <1>; gpios = <&pca9532 0 0>; }; - key2 { + key-2 { label = "KEY2"; linux,code = <2>; gpios = <&pca9532 1 0>; }; - key3 { + key-3 { label = "KEY3"; linux,code = <3>; gpios = <&pca9532 2 0>; }; - key4 { + key-4 { label = "KEY4"; linux,code = <4>; gpios = <&pca9532 3 0>; }; - joy0 { + key-joy0 { label = "Joystick Key 0"; linux,code = <10>; gpios = <&gpio 2 0 0>; /* P2.0 */ }; - joy1 { + key-joy1 { label = "Joystick Key 1"; linux,code = <11>; gpios = <&gpio 2 1 0>; /* P2.1 */ }; - joy2 { + key-joy2 { label = "Joystick Key 2"; linux,code = <12>; gpios = <&gpio 2 2 0>; /* P2.2 */ }; - joy3 { + key-joy3 { label = "Joystick Key 3"; linux,code = <13>; gpios = <&gpio 2 3 0>; /* P2.3 */ }; - joy4 { + key-joy4 { label = "Joystick Key 4"; linux,code = <14>; gpios = <&gpio 2 4 0>; /* P2.4 */ diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts index 21a6d0bca1e8..0f96ea0337a1 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts @@ -200,7 +200,7 @@ cs-gpios = <&gpio 3 5 0>; status = "okay"; - eeprom: at25@0 { + eeprom: eeprom@0 { compatible = "atmel,at25"; reg = <0>; spi-max-frequency = <5000000>; @@ -213,9 +213,9 @@ pl022,wait-state = <0>; pl022,duplex = <0>; - at25,byte-len = <0x8000>; - at25,addr-mode = <2>; - at25,page-size = <64>; + size = <0x8000>; + address-width = <16>; + pagesize = <64>; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi index 974410918f35..e94df78def18 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi @@ -62,74 +62,81 @@ /* * Enable either SLC or MLC */ - slc: flash@20020000 { + slc: nand-controller@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SLC>; + dmas = <&dma 1 1>; + dma-names = "rx-tx"; status = "disabled"; }; - mlc: flash@200a8000 { + mlc: nand-controller@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200a8000 0x11000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_MLC>; + dmas = <&dma 12 1>; + dma-names = "rx-tx"; status = "disabled"; }; - dma: dma@31000000 { + dma: dma-controller@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_DMA>; clock-names = "apb_pclk"; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; }; - usb { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x31020000 0x00001000>; - - /* - * Enable either ohci or usbd (gadget)! - */ - ohci: ohci@0 { - compatible = "nxp,ohci-nxp", "usb-ohci"; - reg = <0x0 0x300>; - interrupt-parent = <&sic1>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usbclk LPC32XX_USB_CLK_HOST>; - status = "disabled"; - }; + /* + * Enable either ohci or usbd (gadget)! + */ + ohci: usb@31020000 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x31020000 0x300>; + interrupt-parent = <&sic1>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; + status = "disabled"; + }; - usbd: usbd@0 { - compatible = "nxp,lpc3220-udc"; - reg = <0x0 0x300>; - interrupt-parent = <&sic1>; - interrupts = <29 IRQ_TYPE_LEVEL_HIGH>, - <30 IRQ_TYPE_LEVEL_HIGH>, - <28 IRQ_TYPE_LEVEL_HIGH>, - <26 IRQ_TYPE_LEVEL_LOW>; - clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; - status = "disabled"; - }; + usbd: usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&sic1>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; + status = "disabled"; + }; - i2cusb: i2c@300 { - compatible = "nxp,pnx-i2c"; - reg = <0x300 0x100>; - interrupt-parent = <&sic1>; - interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usbclk LPC32XX_USB_CLK_I2C>; - #address-cells = <1>; - #size-cells = <0>; - }; + i2cusb: i2c@31020300 { + compatible = "nxp,pnx-i2c"; + reg = <0x31020300 0x100>; + interrupt-parent = <&sic1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; + #address-cells = <1>; + #size-cells = <0>; + }; - usbclk: clock-controller@f00 { - compatible = "nxp,lpc3220-usb-clk"; - reg = <0xf00 0x100>; - #clock-cells = <1>; - }; + usbclk: clock-controller@31020f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0x31020f00 0x100>; + #clock-cells = <1>; }; clcd: clcd@31040000 { @@ -178,8 +185,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk LPC32XX_CLK_SSP0>; - clock-names = "apb_pclk"; + clocks = <&clk LPC32XX_CLK_SSP0>, <&clk LPC32XX_CLK_SSP0>; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -189,6 +196,8 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20088000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI1>; + dmas = <&dmamux 11 1 0>; + dma-names = "rx-tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -202,8 +211,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk LPC32XX_CLK_SSP1>; - clock-names = "apb_pclk"; + clocks = <&clk LPC32XX_CLK_SSP1>, <&clk LPC32XX_CLK_SSP1>; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -213,6 +222,8 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20090000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI2>; + dmas = <&dmamux 3 1 0>; + dma-names = "rx-tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -221,11 +232,16 @@ i2s0: i2s@20094000 { compatible = "nxp,lpc3220-i2s"; reg = <0x20094000 0x1000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_I2S0>; + dmas = <&dma 0 1>, <&dma 13 1>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; - sd: sd@20098000 { - compatible = "arm,pl18x", "arm,primecell"; + sd: mmc@20098000 { + compatible = "arm,pl180", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, <13 IRQ_TYPE_LEVEL_HIGH>; @@ -237,6 +253,11 @@ i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; reg = <0x2009c000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_I2S1>; + dmas = <&dma 2 1>, <&dmamux 10 1 1>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -298,11 +319,13 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400e8000 { + mpwm: pwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; reg = <0x400e8000 0x78>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_MCPWM>; + #pwm-cells = <3>; status = "disabled"; - #pwm-cells = <2>; }; }; @@ -313,20 +336,27 @@ ranges = <0x20000000 0x20000000 0x30000000>; /* System Control Block */ - scb { - compatible = "simple-bus"; - ranges = <0x0 0x40004000 0x00001000>; + syscon@40004000 { + compatible = "nxp,lpc3220-scb", "syscon", "simple-mfd"; + reg = <0x40004000 0x1000>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x40004000 0x1000>; clk: clock-controller@0 { compatible = "nxp,lpc3220-clk"; reg = <0x00 0x114>; #clock-cells = <1>; - clocks = <&xtal_32k>, <&xtal>; clock-names = "xtal_32k", "xtal"; }; + + dmamux: dma-router@78 { + compatible = "nxp,lpc3220-dmamux"; + reg = <0x78 0x8>; + dma-masters = <&dma>; + #dma-cells = <3>; + }; }; mic: interrupt-controller@40008000 { @@ -481,6 +511,7 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005c000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; + #pwm-cells = <3>; assigned-clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; @@ -490,6 +521,7 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005c004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; + #pwm-cells = <3>; assigned-clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts index beddaba85393..5ff43c825944 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts @@ -108,14 +108,14 @@ }; ssp_pins: ssp-pins { - ssp1_cs { + ssp1_cs_cfg { pins = "p6_7"; function = "gpio"; bias-pull-up; bias-disable; }; - ssp1_miso_mosi { + ssp1_miso_mosi_cfg { pins = "p1_3", "p1_4"; function = "ssp1"; slew-rate = <1>; @@ -124,7 +124,7 @@ input-schmitt-disable; }; - ssp1_sck { + ssp1_sck_cfg { pins = "pf_4"; function = "ssp1"; slew-rate = <1>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts index 93d0c2e99e7c..18f757c56905 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts @@ -43,50 +43,50 @@ poll-interval = <100>; autorepeat; - button0 { + button-0 { label = "joy:right"; linux,code = <KEY_RIGHT>; gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; }; - button1 { + button-1 { label = "joy:up"; linux,code = <KEY_UP>; gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; }; - button2 { + button-2 { label = "joy:enter"; linux,code = <KEY_ENTER>; gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; }; - button3 { + button-3 { label = "joy:left"; linux,code = <KEY_LEFT>; gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; }; - button4 { + button-4 { label = "joy:down"; linux,code = <KEY_DOWN>; gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; }; - button5 { + button-5 { label = "user:sw3"; linux,code = <KEY_F1>; gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; }; - button6 { + button-6 { label = "user:sw4"; linux,code = <KEY_F2>; gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; }; - button7 { + button-7 { label = "user:sw5"; linux,code = <KEY_F3>; gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; @@ -406,6 +406,9 @@ ext_sram: sram@2,0 { compatible = "mmio-sram"; reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2 0 0x80000>; }; }; }; @@ -451,8 +454,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-rx-bus-width = <4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi index c4422f587055..707d22a219d8 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi @@ -24,16 +24,25 @@ sram0: sram@10000000 { compatible = "mmio-sram"; reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram1: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram2: sram@20000000 { compatible = "mmio-sram"; reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts index 4aefbc01dfc0..7ccb4c2ca571 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts @@ -60,31 +60,31 @@ poll-interval = <100>; autorepeat; - button0 { + button-0 { label = "joy_enter"; linux,code = <KEY_ENTER>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; - button1 { + button-1 { label = "joy_left"; linux,code = <KEY_LEFT>; gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; }; - button2 { + button-2 { label = "joy_up"; linux,code = <KEY_UP>; gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; }; - button3 { + button-3 { label = "joy_right"; linux,code = <KEY_RIGHT>; gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; }; - button4 { + button-4 { label = "joy_down"; linux,code = <KEY_DOWN>; gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; @@ -403,7 +403,7 @@ }; ssp0_pins: ssp0-pins { - ssp0_sck_miso_mosi { + ssp0_sck_miso_mosi_cfg { pins = "pf_0", "pf_2", "pf_3"; function = "ssp0"; slew-rate = <1>; @@ -412,7 +412,7 @@ input-schmitt-disable; }; - ssp0_ssel { + ssp0_ssel_cfg { pins = "pf_1"; function = "ssp0"; bias-pull-up; @@ -452,12 +452,12 @@ }; usb0_pins: usb0-pins { - usb0_pwr_enable { + usb0_pwr_enable_cfg { pins = "p2_3"; function = "usb0"; }; - usb0_pwr_fault { + usb0_pwr_fault_cfg { pins = "p8_0"; function = "usb0"; bias-disable; @@ -582,8 +582,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-cpol; spi-cpha; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts index 846afb8ccbf1..d18f2b2caf68 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts @@ -63,6 +63,7 @@ panel: panel { compatible = "innolux,at070tn92"; + power-supply = <&vcc>; port { panel_input: endpoint { @@ -543,7 +544,7 @@ pinctrl-0 = <&enet_rmii_pins>; phy-handle = <&phy1>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -569,8 +570,9 @@ pinctrl-0 = <&spifi_pins>; /* Atmel AT25DF321A */ - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-max-frequency = <51000000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi index 72f12db8d53a..d138ee7869ff 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi @@ -24,16 +24,25 @@ sram0: sram@10000000 { compatible = "mmio-sram"; reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram1: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram2: sram@20000000 { compatible = "mmio-sram"; reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; }; }; diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile index 14759331dba2..53240b04c968 100644 --- a/arch/arm/boot/dts/nxp/ls/Makefile +++ b/arch/arm/boot/dts/nxp/ls/Makefile @@ -6,3 +6,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-tqmls1021a-mbls1021a.dtb \ ls1021a-tsn.dtb \ ls1021a-twr.dtb + +ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo +ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo +ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtbo +ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtbo +dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb +dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb +dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtb +dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts index f1acb97aee69..a880875ced83 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts @@ -66,7 +66,7 @@ bus-num = <0>; status = "okay"; - dspiflash: at45db021d@0 { + dspiflash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; @@ -187,7 +187,7 @@ <0x3 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; @@ -211,8 +211,8 @@ device-width = <1>; ranges = <0 3 0 0x100>; - mdio-mux-emi1 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso new file mode 100644 index 000000000000..e713a2ecbfc2 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +&dcu { + status = "okay"; + + port { + dcu_out: endpoint { + remote-endpoint = <&sii9022a_in>; + }; + }; +}; + +&hdmi_out { + status = "okay"; +}; + +&sii9022a { + status = "okay"; +}; + +&sii9022a_in { + remote-endpoint = <&dcu_out>; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso new file mode 100644 index 000000000000..e9708f3c6740 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include <dt-bindings/gpio/gpio.h> + +/dts-v1/; +/plugin/; + +&backlight_dcu { + status = "okay"; +}; + +&dcu { + status = "okay"; + + port { + dcu_out: endpoint { + remote-endpoint = <&lvds_encoder_in>; + }; + }; +}; + +&display { + compatible = "tianma,tm070jvhg33"; + status = "okay"; +}; + +&lvds_encoder { + status = "okay"; +}; + +&lvds_encoder_in { + remote-endpoint = <&dcu_out>; +}; + +&lvds_encoder_out { + remote-endpoint = <&panel_in>; +}; + +&panel_in { + remote-endpoint = <&lvds_encoder_out>; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso new file mode 100644 index 000000000000..66cedc2dcd96 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/plugin/; + +&backlight_dcu { + status = "okay"; +}; + +&dcu { + status = "okay"; + + port { + dcu_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&display { + compatible = "cdtech,s070swv29hg-dc44"; + status = "okay"; +}; + +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pca9554_0>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + /* LCD_PWR_EN -> TSC_WAKE */ + wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>; + iovcc-supply = <®_3p3v>; + vcc-supply = <®_3p3v>; + gain = <20>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&panel_in { + remote-endpoint = <&dcu_out>; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso new file mode 100644 index 000000000000..8b9455bffbd2 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/plugin/; + +&backlight_dcu { + status = "okay"; +}; + +&dcu { + status = "okay"; + + port { + dcu_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&display { + compatible = "cdtech,s070pws19hp-fc21"; + status = "okay"; +}; + +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pca9554_0>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + /* LCD_PWR_EN -> TSC_WAKE */ + wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>; + iovcc-supply = <®_3p3v>; + vcc-supply = <®_3p3v>; + gain = <20>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&panel_in { + remote-endpoint = <&dcu_out>; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts index 34636fcdfd6a..5606585dd560 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, @@ -147,6 +147,7 @@ display: panel { backlight = <&backlight_dcu>; enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; + power-supply = <®_3p3v>; status = "disabled"; port { @@ -156,7 +157,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "ls1021a-mbls1021a-tlv320aic32"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; }; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi index 1b13851ad997..167559521ae1 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, @@ -66,12 +66,11 @@ qflash0: flash@0 { compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <20000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; reg = <0>; + vcc-supply = <®_3p3v_som>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts index 1ea32fff4120..da76566f3510 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts @@ -40,8 +40,6 @@ /* ADG704BRMZ 1:4 SPI mux/demux */ sja1105: ethernet-switch@1 { reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; compatible = "nxp,sja1105t"; /* 12 MHz */ spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts index f5c03871b205..38281b904301 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts @@ -151,7 +151,7 @@ ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; status = "okay"; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index e86998ca77d6..e0b9ea6dd510 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -93,10 +93,9 @@ compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; - gic: interrupt-controller@1400000 { + gic: interrupt-controller@1401000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -155,14 +154,13 @@ status = "disabled"; }; - esdhc: esdhc@1560000 { + esdhc: mmc@1560000 { compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; status = "disabled"; }; @@ -611,11 +609,10 @@ }; wdog0: watchdog@2ad0000 { - compatible = "fsl,imx21-wdt"; + compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; - clock-names = "wdog-en"; big-endian; }; @@ -627,9 +624,9 @@ clocks = <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 47>, - <&edma0 1 46>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 46>, + <&edma0 1 47>; status = "disabled"; }; @@ -641,9 +638,9 @@ clocks = <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 45>, - <&edma0 1 44>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 44>, + <&edma0 1 45>; status = "disabled"; }; @@ -707,6 +704,7 @@ enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d10000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -717,8 +715,6 @@ dma-coherent; queue-group@2d10000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d10000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, @@ -726,8 +722,6 @@ }; queue-group@2d14000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d14000 0x0 0x1000>; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -737,6 +731,7 @@ enet1: ethernet@2d50000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d50000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -746,8 +741,6 @@ dma-coherent; queue-group@2d50000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d50000 0x0 0x1000>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, @@ -755,8 +748,6 @@ }; queue-group@2d54000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d54000 0x0 0x1000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, @@ -766,6 +757,7 @@ enet2: ethernet@2d90000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d90000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -775,8 +767,6 @@ dma-coherent; queue-group@2d90000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d90000 0x0 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, @@ -784,8 +774,6 @@ }; queue-group@2d94000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d94000 0x0 0x1000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, @@ -810,7 +798,6 @@ snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - snps,host-vbus-glitches; }; pcie@3400000 { @@ -917,7 +904,7 @@ ranges = <0x0 0x0 0x10010000 0x10000>; }; - qdma: dma-controller@8390000 { + qdma: dma-controller@8388000 { compatible = "fsl,ls1021a-qdma"; reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ <0x0 0x8389000 0x0 0x1000>, /* Status regs */ @@ -937,17 +924,15 @@ big-endian; }; - rcpm: power-controller@1ee2140 { + rcpm: wakeup-controller@1ee2140 { compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x8>; #fsl,rcpm-wakeup-cells = <2>; - #power-domain-cells = <0>; }; - ftm_alarm0: timer0@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1021a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; - reg-names = "ftm"; fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; big-endian; diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile index a430d04f9c69..d72ba702b6fa 100644 --- a/arch/arm/boot/dts/nxp/mxs/Makefile +++ b/arch/arm/boot/dts/nxp/mxs/Makefile @@ -5,9 +5,13 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ imx23-xfi3.dtb \ + imx28-amarula-rmm.dtb \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ + imx28-btt3-0.dtb \ + imx28-btt3-1.dtb \ + imx28-btt3-2.dtb \ imx28-cfa10036.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts index e372e9327a47..38be7dfabcc0 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts @@ -116,7 +116,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_gpio2_1>; - user { + led-user { label = "green"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts index cb661bf2d157..613f13b6c8a8 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts @@ -93,9 +93,9 @@ MX23_PAD_LCD_HSYNC__GPIO_1_24 MX23_PAD_PWM3__GPIO_1_29 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts index 0b088c8ab6b6..fad08f6c008f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts @@ -83,9 +83,9 @@ fsl,pinmux-ids = < MX23_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; key_pins_a: keys@0 { @@ -94,9 +94,9 @@ MX23_PAD_ROTARYA__GPIO_2_7 MX23_PAD_ROTARYB__GPIO_2_8 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index 5e21252fb7c9..58575e2c1ca5 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -420,9 +420,9 @@ <60>, <58>, <9>, <0>, <0>, <0>, <0>, <0>; interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", - "saif0", "empty", "auart0-rx", "auart0-tx", - "auart1-rx", "auart1-tx", "saif1", "empty", - "empty", "empty", "empty", "empty"; + "saif0", "empty0", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty1", + "empty2", "empty3", "empty4", "empty5"; #dma-cells = <1>; dma-channels = <16>; clocks = <&clks 16>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts new file mode 100644 index 000000000000..ddb64f3d0471 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "amarula,imx28-rmm", "fsl,imx28"; + model = "Amarula i.MX28 rmm"; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + device_type = "memory"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + power-supply = <®_5v>; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm 7 100000 0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led-0 { + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_fec_3v3: regulator-fec-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&fec_3v3_enable_pin>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <300000>; + vin-supply = <®_5v>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_vbus_enable_pin>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_enable_pin>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx28-mrmmi-tlv320aic3x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPROUT", + "Headphone Jack", "HPRCOM"; + simple-audio-card,mclk-fs = <512>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&saif0>; + clocks = <&saif0>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&tlv320aic3x>; + }; + }; +}; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&duart_pins_b { + fsl,voltage = <MXS_VOLTAGE_LOW>; +}; + +&gpmi { + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + tlv320aic3x: audio-codec@18 { + compatible = "ti,tlv320aic3x"; + pinctrl-names = "default"; + pinctrl-0 = <&tlv320aic3x_pins>; + reg = <0x18>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + DVDD-supply = <®_1v8>; + IOVDD-supply = <®_3v3>; + AVDD-supply = <®_3v3>; + DRVDD-supply = <®_3v3>; + }; + + touchscreen: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-mode = "rmii"; + phy-supply = <®_fec_3v3>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + edt_ft5x06_pins: edt-ft5x06@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */ + MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_ENABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + edt_ft5x06_wake_pin: edt-ft5x06-wake@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>; + fsl,drive-strength = <MXS_DRIVE_16mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + fec_3v3_enable_pin: fec-3v3-enable@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + leds_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + MX28_PAD_PWM0__GPIO_3_16 + MX28_PAD_PWM1__GPIO_3_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + tlv320aic3x_pins: tlv320aic3x-pins@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA4__GPIO_2_4>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_ENABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + usb0_vbus_enable_pin: usb0-vbus-enable@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + + usb1_vbus_enable_pin: usb1-vbus-enable@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +/* microSD */ +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + broken-cd; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts index 6c87266eb135..63bbaa15c54d 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts @@ -29,7 +29,7 @@ leds { compatible = "gpio-leds"; - user { + led-user { label = "Heartbeat"; gpios = <&gpio0 21 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts index 0d845ca81e89..774eb49cfbc0 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts @@ -31,7 +31,7 @@ leds { compatible = "gpio-leds"; - user { + led-user { label = "Heartbeat"; gpios = <&gpio3 28 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts new file mode 100644 index 000000000000..6ac46e4b21bb --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" + +&hog_pins_rev { + fsl,pull-up = <MXS_PULL_ENABLE>; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts new file mode 100644 index 000000000000..213fe931c58b --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts new file mode 100644 index 000000000000..4bccd784d065 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-btt3.dtsi" + +/ { + panel { + compatible = "powertip,st7272", "panel-dpi"; + power-supply = <®_3v3>; + width-mm = <70>; + height-mm = <52>; + + panel-timing { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hfront-porch = <20>; + hback-porch = <68>; + hsync-len = <30>; + vfront-porch = <4>; + vback-porch = <14>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi new file mode 100644 index 000000000000..a6903ef2b093 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ +/dts-v1/; +#include "imx28-lwe.dtsi" + +/ { + model = "BTT3"; + + compatible = "lwn,imx28-btt3", "fsl,imx28"; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1 quiet"; + }; + + memory@40000000 { + reg = <0x40000000 0x10000000>; + device_type = "memory"; + }; + + panel { + compatible = "powertip,hx8238a", "panel-dpi"; + power-supply = <®_3v3>; + width-mm = <70>; + height-mm = <52>; + + panel-timing { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hfront-porch = <20>; + hback-porch = <38>; + hsync-len = <30>; + vfront-porch = <4>; + vback-porch = <14>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "BTTC Audio"; + simple-audio-card,widgets = "Speaker", "BTTC Speaker"; + simple-audio-card,routing = "BTTC Speaker", "SPKOUTN", "BTTC Speaker", "SPKOUTP"; + + simple-audio-card,dai-link@0 { + format = "left_j"; + bitclock-master = <&dai0_master>; + frame-master = <&dai0_master>; + mclk-fs = <256>; + + dai0_master: cpu { + sound-dai = <&saif0>; + }; + + codec { + sound-dai = <&wm89xx>; + clocks = <&saif0>; + }; + }; + }; + + wifi_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_pin_bttc>; + reset-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + /* W1-163 needs 60us for WL_EN to be low and */ + /* 150ms after high before downloading FW is possible */ + post-power-on-delay-ms = <200>; + power-off-delay-us = <100>; + }; +}; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&i2c0 { + wm89xx: audio-codec@1a { + compatible = "wlf,wm8940"; + reg = <0x1a>; + #sound-dai-cells = <0>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>, + <&lcdif_reset_pins_bttc>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&mac0 { + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; + phy-handle = <&mac0_phy>; + phy-mode = "rmii"; + phy-supply = <®_3v3>; + /* + * This MAC address is adjusted during production. + * Value specified below is used as a fallback during recovery. + */ + local-mac-address = [ 00 11 B8 00 BF 8A ]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mac0_phy: ethernet-phy@0 { + /* LAN8720Ai - PHY ID */ + compatible = "ethernet-phy-id0007.c0f0","ethernet-phy-ieee802.3-c22"; + reg = <0>; + smsc,disable-energy-detect; + max-speed = <100>; + reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>, <&hog_pins_rev>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_GPMI_WRN__GPIO_0_25 + MX28_PAD_ENET0_RXD2__GPIO_4_9 + MX28_PAD_ENET0_TXD2__GPIO_4_11 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_rev: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_RXD3__GPIO_4_10 + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 + MX28_PAD_ENET0_COL__GPIO_4_14 + MX28_PAD_ENET0_CRS__GPIO_4_15 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + keypad_pins_bttc: keypad-bttc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_AUART0_RTS__GPIO_3_3 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_CE2N__GPIO_0_18 + MX28_PAD_GPMI_CE3N__GPIO_0_19 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_sync_pins_bttc: lcdif-bttc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_RD_E__LCD_VSYNC + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_reset_pins_bttc: lcdif-bttc@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + ssp1_sdio_pins_a: ssp1-sdio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_DATA0__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_SSP1_DATA3__SSP1_D3 + MX28_PAD_SSP1_CMD__SSP1_CMD + MX28_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + wifi_en_pin_bttc: wifi-en-pin@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +®_usb_5v { + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + #sound-dai-cells = <0>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_sdio_pins_a>; + bus-width = <4>; + no-1-8-v; /* force 3.3V VIO */ + non-removable; + vmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + keep-power-in-suspend; + status = "okay"; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts index d004b1cbb4ae..f4485334e9f8 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts @@ -21,7 +21,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_cfa10036>; - power { + led-power { gpios = <&gpio3 4 1>; default-state = "on"; }; @@ -102,9 +102,9 @@ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts index f0ce897b9d5c..dfe3f08426ac 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts @@ -107,7 +107,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; - gpios-reset = <&gpio3 30 0>; + reset-gpios = <&gpio3 30 0>; im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts index cb68edd6101b..aeac1d29058d 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts @@ -33,7 +33,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; - gpios-reset = <&gpio3 30 0>; + reset-gpios = <&gpio3 30 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts index bc2d6fcad12f..add6a23728e7 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts @@ -32,7 +32,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; - gpios-reset = <&gpio3 30 0>; + reset-gpios = <&gpio3 30 0>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts index b73020ff1053..5e3f09109605 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts @@ -12,12 +12,12 @@ compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; leds { - rs485-red { + led-rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; }; - rs485-green { + led-rs485-green { label = "duckbill:green:rs485"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts index 473d99b9b42f..2168a59a33b3 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts @@ -13,17 +13,17 @@ compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; leds { - enocean-blue { + led-enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; }; - enocean-red { + led-enocean-red { label = "duckbill:red:enocean"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; - enocean-green { + led-enocean-green { label = "duckbill:green:enocean"; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts index 4e28212e9626..9bc703e7b2bc 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts @@ -31,13 +31,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - status-red { + led-status-red { label = "duckbill:red:status"; gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - status-green { + led-status-green { label = "duckbill:green:status"; gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts index 13ffd533fdea..d5a1983f9289 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts @@ -30,13 +30,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - status-red { + led-status-red { label = "duckbill:red:status"; gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - status-green { + led-status-green { label = "duckbill:green:status"; gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts index 330d3aff6b6c..d1ff001b4037 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_gpio3_5>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio3 5 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts index 34b4d3246db1..0f2bfb4845a9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts @@ -27,13 +27,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_gpio>; - user1 { + led-user1 { label = "sd0-led"; gpios = <&gpio2 26 0>; linux,default-trigger = "mmc0"; }; - user2 { + led-user2 { label = "sd1-led"; gpios = <&gpio2 24 0>; linux,default-trigger = "mmc2"; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts index 0f01dded4e3d..9e19c63a4d51 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts @@ -24,30 +24,25 @@ }; leds { - #address-cells = <1>; - #size-cells = <0>; compatible = "gpio-leds"; status = "okay"; - led@1 { + led-1 { label = "sps1-1:yellow:user"; gpios = <&gpio0 6 0>; linux,default-trigger = "heartbeat"; - reg = <0>; }; - led@2 { + led-2 { label = "sps1-2:red:user"; gpios = <&gpio0 3 0>; linux,default-trigger = "heartbeat"; - reg = <1>; }; - led@3 { + led-3 { label = "sps1-3:red:user"; gpios = <&gpio0 0 0>; - default-trigger = "heartbeat"; - reg = <2>; + linux,default-trigger = "heartbeat"; }; }; @@ -132,7 +127,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; + compatible = "everspin,mr25h256"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 9290635352f1..197eba22f39c 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -20,11 +20,6 @@ ds1339 = &ds1339; gpio5 = &gpio5; lcdif = &lcdif; - lcdif_23bit_pins = &tx28_lcdif_23bit_pins; - lcdif_24bit_pins = &lcdif_24bit_pins_a; - reg_can_xcvr = ®_can_xcvr; - spi_gpio = &spi_gpio; - spi_mxs = &ssp3; stk5led = &user_led; usbotg = &usb0; }; @@ -122,7 +117,7 @@ leds { compatible = "gpio-leds"; - user_led: user { + user_led: led-user { label = "Heartbeat"; gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -280,7 +275,7 @@ }; polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&tx28_edt_ft5x06_pins>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index bbea8b77386f..ece46d0e7c7f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -755,6 +755,16 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + pwm7_pins_a: pwm7@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__PWM_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 5a19da9313ae..86c360868e4b 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -17,6 +17,7 @@ panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -142,11 +143,9 @@ }; &iomuxc { - vf610-colibri { - pinctrl_can_int: can_int { - fsl,pins = < - VF610_PAD_PTB21__GPIO_43 0x22ed - >; - }; + pinctrl_can_int: can_intgrp { + fsl,pins = < + VF610_PAD_PTB21__GPIO_43 0x22ed + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi index cc1e069c44e6..98f9ee1b0030 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi @@ -171,180 +171,178 @@ }; &iomuxc { - vf610-colibri { - pinctrl_flexcan0: can0grp { - fsl,pins = < - VF610_PAD_PTB14__CAN0_RX 0x31F1 - VF610_PAD_PTB15__CAN0_TX 0x31F2 - >; - }; - - pinctrl_flexcan1: can1grp { - fsl,pins = < - VF610_PAD_PTB16__CAN1_RX 0x31F1 - VF610_PAD_PTB17__CAN1_TX 0x31F2 - >; - }; - - pinctrl_gpio_ext: gpio_ext { - fsl,pins = < - VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ - VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ - VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ - >; - }; - - pinctrl_dcu0_1: dcu0grp_1 { - fsl,pins = < - VF610_PAD_PTE0__DCU0_HSYNC 0x1902 - VF610_PAD_PTE1__DCU0_VSYNC 0x1902 - VF610_PAD_PTE2__DCU0_PCLK 0x1902 - VF610_PAD_PTE4__DCU0_DE 0x1902 - VF610_PAD_PTE5__DCU0_R0 0x1902 - VF610_PAD_PTE6__DCU0_R1 0x1902 - VF610_PAD_PTE7__DCU0_R2 0x1902 - VF610_PAD_PTE8__DCU0_R3 0x1902 - VF610_PAD_PTE9__DCU0_R4 0x1902 - VF610_PAD_PTE10__DCU0_R5 0x1902 - VF610_PAD_PTE11__DCU0_R6 0x1902 - VF610_PAD_PTE12__DCU0_R7 0x1902 - VF610_PAD_PTE13__DCU0_G0 0x1902 - VF610_PAD_PTE14__DCU0_G1 0x1902 - VF610_PAD_PTE15__DCU0_G2 0x1902 - VF610_PAD_PTE16__DCU0_G3 0x1902 - VF610_PAD_PTE17__DCU0_G4 0x1902 - VF610_PAD_PTE18__DCU0_G5 0x1902 - VF610_PAD_PTE19__DCU0_G6 0x1902 - VF610_PAD_PTE20__DCU0_G7 0x1902 - VF610_PAD_PTE21__DCU0_B0 0x1902 - VF610_PAD_PTE22__DCU0_B1 0x1902 - VF610_PAD_PTE23__DCU0_B2 0x1902 - VF610_PAD_PTE24__DCU0_B3 0x1902 - VF610_PAD_PTE25__DCU0_B4 0x1902 - VF610_PAD_PTE26__DCU0_B5 0x1902 - VF610_PAD_PTE27__DCU0_B6 0x1902 - VF610_PAD_PTE28__DCU0_B7 0x1902 - >; - }; - - pinctrl_dspi1: dspi1grp { - fsl,pins = < - VF610_PAD_PTD5__DSPI1_CS0 0x33e2 - VF610_PAD_PTD6__DSPI1_SIN 0x33e1 - VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 - VF610_PAD_PTD8__DSPI1_SCK 0x33e2 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB20__GPIO_42 0x219d - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - - pinctrl_gpio_bl_on: gpio_bl_on { - fsl,pins = < - VF610_PAD_PTC0__GPIO_45 0x22ef - >; - }; - - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x37ff - VF610_PAD_PTB15__I2C0_SDA 0x37ff - >; - }; - - pinctrl_i2c0_gpio: i2c0gpiogrp { - fsl,pins = < - VF610_PAD_PTB14__GPIO_36 0x37ff - VF610_PAD_PTB15__GPIO_37 0x37ff - >; - }; - - pinctrl_nfc: nfcgrp { - fsl,pins = < - VF610_PAD_PTD23__NF_IO7 0x28df - VF610_PAD_PTD22__NF_IO6 0x28df - VF610_PAD_PTD21__NF_IO5 0x28df - VF610_PAD_PTD20__NF_IO4 0x28df - VF610_PAD_PTD19__NF_IO3 0x28df - VF610_PAD_PTD18__NF_IO2 0x28df - VF610_PAD_PTD17__NF_IO1 0x28df - VF610_PAD_PTD16__NF_IO0 0x28df - VF610_PAD_PTB24__NF_WE_B 0x28c2 - VF610_PAD_PTB25__NF_CE0_B 0x28c2 - VF610_PAD_PTB27__NF_RE_B 0x28c2 - VF610_PAD_PTC26__NF_RB_B 0x283d - VF610_PAD_PTC27__NF_ALE 0x28c2 - VF610_PAD_PTC28__NF_CLE 0x28c2 - >; - }; - - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1182 - VF610_PAD_PTB1__FTM0_CH1 0x1182 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - VF610_PAD_PTB8__FTM1_CH0 0x1182 - VF610_PAD_PTB9__FTM1_CH1 0x1182 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - VF610_PAD_PTB12__UART0_RTS 0x21a2 - VF610_PAD_PTB13__UART0_CTS 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; - - pinctrl_usbh1_reg: gpio_usb_vbus { - fsl,pins = < - VF610_PAD_PTD4__GPIO_83 0x22ed - >; - }; + pinctrl_flexcan0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x31F1 + VF610_PAD_PTB15__CAN0_TX 0x31F2 + >; + }; + + pinctrl_flexcan1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x31F1 + VF610_PAD_PTB17__CAN1_TX 0x31F2 + >; + }; + + pinctrl_gpio_ext: gpio_extgrp { + fsl,pins = < + VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ + VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ + VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ + >; + }; + + pinctrl_dcu0_1: dcu01grp { + fsl,pins = < + VF610_PAD_PTE0__DCU0_HSYNC 0x1902 + VF610_PAD_PTE1__DCU0_VSYNC 0x1902 + VF610_PAD_PTE2__DCU0_PCLK 0x1902 + VF610_PAD_PTE4__DCU0_DE 0x1902 + VF610_PAD_PTE5__DCU0_R0 0x1902 + VF610_PAD_PTE6__DCU0_R1 0x1902 + VF610_PAD_PTE7__DCU0_R2 0x1902 + VF610_PAD_PTE8__DCU0_R3 0x1902 + VF610_PAD_PTE9__DCU0_R4 0x1902 + VF610_PAD_PTE10__DCU0_R5 0x1902 + VF610_PAD_PTE11__DCU0_R6 0x1902 + VF610_PAD_PTE12__DCU0_R7 0x1902 + VF610_PAD_PTE13__DCU0_G0 0x1902 + VF610_PAD_PTE14__DCU0_G1 0x1902 + VF610_PAD_PTE15__DCU0_G2 0x1902 + VF610_PAD_PTE16__DCU0_G3 0x1902 + VF610_PAD_PTE17__DCU0_G4 0x1902 + VF610_PAD_PTE18__DCU0_G5 0x1902 + VF610_PAD_PTE19__DCU0_G6 0x1902 + VF610_PAD_PTE20__DCU0_G7 0x1902 + VF610_PAD_PTE21__DCU0_B0 0x1902 + VF610_PAD_PTE22__DCU0_B1 0x1902 + VF610_PAD_PTE23__DCU0_B2 0x1902 + VF610_PAD_PTE24__DCU0_B3 0x1902 + VF610_PAD_PTE25__DCU0_B4 0x1902 + VF610_PAD_PTE26__DCU0_B5 0x1902 + VF610_PAD_PTE27__DCU0_B6 0x1902 + VF610_PAD_PTE28__DCU0_B7 0x1902 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x33e2 + VF610_PAD_PTD6__DSPI1_SIN 0x33e1 + VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 + VF610_PAD_PTD8__DSPI1_SCK 0x33e2 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_bl_on: gpio_bl_ongrp { + fsl,pins = < + VF610_PAD_PTC0__GPIO_45 0x22ef + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c0_gpio: i2c0gpiogrp { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x37ff + VF610_PAD_PTB15__GPIO_37 0x37ff + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + VF610_PAD_PTB12__UART0_RTS 0x21a2 + VF610_PAD_PTB13__UART0_CTS 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + + pinctrl_usbh1_reg: gpio_usb_vbusgrp { + fsl,pins = < + VF610_PAD_PTD4__GPIO_83 0x22ed + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi index 8af7ed56e653..ae3403c766d6 100644 --- a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi @@ -40,30 +40,28 @@ }; &iomuxc { - vf610-colibri { - pinctrl_touchctrl_idle: touchctrl_idle { - fsl,pins = < - VF610_PAD_PTA18__GPIO_8 0x006d - VF610_PAD_PTA19__GPIO_9 0x006c - >; - }; + pinctrl_touchctrl_idle: touchctrl_idlegrp { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; - pinctrl_touchctrl_default: touchctrl_default { - fsl,pins = < - VF610_PAD_PTA18__ADC0_SE0 0x0040 - VF610_PAD_PTA19__ADC0_SE1 0x0040 - VF610_PAD_PTA16__ADC1_SE0 0x0040 - VF610_PAD_PTB2__ADC1_SE2 0x0040 - >; - }; + pinctrl_touchctrl_default: touchctrl_defaultgrp { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; - pinctrl_touchctrl_gpios: touchctrl_gpios { - fsl,pins = < - VF610_PAD_PTA23__GPIO_13 0x22e9 - VF610_PAD_PTB23__GPIO_93 0x22e9 - VF610_PAD_PTA22__GPIO_12 0x22e9 - VF610_PAD_PTA11__GPIO_4 0x22e9 - >; - }; + pinctrl_touchctrl_gpios: touchctrl_gpiosgrp { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi index 0c0dd442300a..71ccdaa6f269 100644 --- a/arch/arm/boot/dts/nxp/vf/vf500.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi @@ -43,15 +43,13 @@ }; }; - bus@40080000 { - pmu@40089000 { - compatible = "arm,cortex-a5-pmu"; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a5_cpu>; - reg = <0x40089000 0x1000>; - }; - }; + }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a5_cpu>; + interrupt-parent = <&mscm_ir>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index 722182f5fd17..e36c854dc297 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -119,7 +119,7 @@ status = "okay"; spidev0@0 { - compatible = "lwn,bk4"; + compatible = "lwn,bk4-spi"; spi-max-frequency = <30000000>; reg = <0>; fsl,spi-cs-sck-delay = <200>; @@ -136,7 +136,7 @@ #address-cells = <0>; slave { - compatible = "lwn,bk4"; + compatible = "lwn,bk4-spi"; spi-max-frequency = <30000000>; }; }; @@ -458,7 +458,7 @@ >; }; - pinctrl_gpio_spi: pinctrl-gpio-spi { + pinctrl_gpio_spi: pinctrl-gpio-spigrp { fsl,pins = < VF610_PAD_PTB18__GPIO_40 0x1183 VF610_PAD_PTD10__GPIO_89 0x1183 diff --git a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi index 607cec2df861..20aed3946214 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi @@ -8,7 +8,6 @@ / { model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts index 703f375d7e24..f1e6344b0c69 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts @@ -47,39 +47,37 @@ }; &iomuxc { - vf610-cosmic { - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB28__GPIO_98 0x219d - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts index 876c14ecceb6..e7c2f6d46ab2 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts @@ -166,131 +166,129 @@ }; &iomuxc { - vf610-twr { - pinctrl_adc0_ad5: adc0ad5grp { - fsl,pins = < - VF610_PAD_PTC30__ADC0_SE5 0xa1 - >; - }; + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0xa1 + >; + }; - pinctrl_dspi0: dspi0grp { - fsl,pins = < - VF610_PAD_PTB19__DSPI0_CS0 0x1182 - VF610_PAD_PTB20__DSPI0_SIN 0x1181 - VF610_PAD_PTB21__DSPI0_SOUT 0x1182 - VF610_PAD_PTB22__DSPI0_SCK 0x1182 - >; - }; + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTA7__GPIO_134 0x219d - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; - pinctrl_fec0: fec0grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKIN 0x30d1 - VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 - VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 - VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 - VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 - VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 - VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 - VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 - VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 - VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 - >; - }; + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x30d3 - VF610_PAD_PTB15__I2C0_SDA 0x30d3 - >; - }; + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x30d3 + VF610_PAD_PTB15__I2C0_SDA 0x30d3 + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - VF610_PAD_PTD31__NF_IO15 0x28df - VF610_PAD_PTD30__NF_IO14 0x28df - VF610_PAD_PTD29__NF_IO13 0x28df - VF610_PAD_PTD28__NF_IO12 0x28df - VF610_PAD_PTD27__NF_IO11 0x28df - VF610_PAD_PTD26__NF_IO10 0x28df - VF610_PAD_PTD25__NF_IO9 0x28df - VF610_PAD_PTD24__NF_IO8 0x28df - VF610_PAD_PTD23__NF_IO7 0x28df - VF610_PAD_PTD22__NF_IO6 0x28df - VF610_PAD_PTD21__NF_IO5 0x28df - VF610_PAD_PTD20__NF_IO4 0x28df - VF610_PAD_PTD19__NF_IO3 0x28df - VF610_PAD_PTD18__NF_IO2 0x28df - VF610_PAD_PTD17__NF_IO1 0x28df - VF610_PAD_PTD16__NF_IO0 0x28df - VF610_PAD_PTB24__NF_WE_B 0x28c2 - VF610_PAD_PTB25__NF_CE0_B 0x28c2 - VF610_PAD_PTB27__NF_RE_B 0x28c2 - VF610_PAD_PTC26__NF_RB_B 0x283d - VF610_PAD_PTC27__NF_ALE 0x28c2 - VF610_PAD_PTC28__NF_CLE 0x28c2 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD31__NF_IO15 0x28df + VF610_PAD_PTD30__NF_IO14 0x28df + VF610_PAD_PTD29__NF_IO13 0x28df + VF610_PAD_PTD28__NF_IO12 0x28df + VF610_PAD_PTD27__NF_IO11 0x28df + VF610_PAD_PTD26__NF_IO10 0x28df + VF610_PAD_PTD25__NF_IO9 0x28df + VF610_PAD_PTD24__NF_IO8 0x28df + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + >; + }; - pinctrl_sai2: sai2grp { - fsl,pins = < - VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed - VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee - VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed - VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed - VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed - VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed - VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed - >; - }; + pinctrl_sai2: sai2grp { + fsl,pins = < + VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed + VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee + VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed + VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed + VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed + VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed + VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTB6__UART2_TX 0x21a2 - VF610_PAD_PTB7__UART2_RX 0x21a1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 7e72f860c3c5..929426c1299c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -68,8 +68,8 @@ pinctrl-0 = <&pinctrl_optical>; pinctrl-names = "default"; i2c-bus = <&i2c0>; - los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; }; supply-voltage-monitor { @@ -333,7 +333,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 VF610_PAD_PTE3__GPIO_108 0x31c2 diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index 029f49be40e3..be6147239362 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -412,13 +412,13 @@ }; &iomuxc { - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { + pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x33e2 >; }; - pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp { fsl,pins = < VF610_PAD_PTB22__GPIO_44 0x33e2 VF610_PAD_PTB21__GPIO_43 0x33e2 @@ -428,7 +428,7 @@ >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-mux-grp { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 VF610_PAD_PTA19__GPIO_9 0x31c2 @@ -437,7 +437,7 @@ >; }; - pinctrl_pca9554_22: pinctrl-pca95540-22 { + pinctrl_pca9554_22: pinctrl-pca95540-22-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts index 6f9878f124c4..79ea7cf57a4d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts @@ -311,7 +311,7 @@ * I/O14 - OPT1_TX_DIS * I/O15 - OPT2_TX_DIS */ - gpio6: sx1503@20 { + gpio6: pinctrl@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; @@ -392,7 +392,7 @@ }; &gpio0 { - eth0_intrp { + eth0-intrp-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; input; @@ -401,7 +401,7 @@ }; &gpio3 { - eth0_intrp { + eth0-intrp-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; input; @@ -429,7 +429,7 @@ }; &iomuxc { - pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp { fsl,pins = < VF610_PAD_PTB2__GPIO_24 0x31c2 VF610_PAD_PTE27__GPIO_132 0x33e2 @@ -437,7 +437,7 @@ }; - pinctrl_sx1503_20: pinctrl-sx1503-20 { + pinctrl_sx1503_20: pinctrl-sx1503-20grp { fsl,pins = < VF610_PAD_PTB1__GPIO_23 0x219d >; @@ -450,7 +450,7 @@ >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-muxgrp { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 VF610_PAD_PTA19__GPIO_9 0x31c2 @@ -458,7 +458,7 @@ >; }; - pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi index ce5e52896b19..91cc496ffb90 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi @@ -335,7 +335,7 @@ >; }; - pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp { fsl,pins = < VF610_PAD_PTB22__GPIO_44 0x33e2 VF610_PAD_PTB21__GPIO_43 0x33e2 @@ -345,19 +345,19 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp { fsl,pins = < VF610_PAD_PTB5__GPIO_27 0x219d >; }; - pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp { fsl,pins = < VF610_PAD_PTB4__GPIO_26 0x219d >; }; - pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 >; @@ -370,7 +370,7 @@ >; }; - pinctrl_i2c0_gpio: i2c0grp-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { fsl,pins = < VF610_PAD_PTB14__GPIO_36 0x31c2 VF610_PAD_PTB15__GPIO_37 0x31c2 @@ -392,7 +392,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debug-grp { fsl,pins = < VF610_PAD_PTD20__GPIO_74 0x31c2 >; @@ -436,7 +436,7 @@ >; }; - pinctrl_usb_vbus: pinctrl-usb-vbus { + pinctrl_usb_vbus: pinctrl-usb-vbus-grp { fsl,pins = < VF610_PAD_PTA16__GPIO_6 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index 77492eeea450..8020a644dd9d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -583,7 +583,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - gpio9: io-expander@20 { + gpio9: pinctrl@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sx1503_20>; @@ -623,7 +623,6 @@ i2c-mux@70 { compatible = "nxp,pca9548"; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; @@ -662,7 +661,6 @@ i2c-mux@71 { compatible = "nxp,pca9548"; - pinctrl-names = "default"; reg = <0x71>; #address-cells = <1>; #size-cells = <0>; @@ -747,7 +745,7 @@ >; }; - pinctrl_dspi2: dspi2gpio { + pinctrl_dspi2: dspi2gpiogrp { fsl,pins = < VF610_PAD_PTD30__GPIO_64 0x33e2 VF610_PAD_PTD29__GPIO_65 0x33e1 @@ -819,13 +817,13 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTB26__GPIO_96 0x31c2 >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-muxgrp { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x31c2 VF610_PAD_PTE28__GPIO_133 0x31c2 @@ -845,7 +843,7 @@ >; }; - pinctrl_sx1503_20: pinctrl-sx1503-20 { + pinctrl_sx1503_20: pinctrl-sx1503-20grp { fsl,pins = < VF610_PAD_PTD31__GPIO_63 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 2a490464660c..423d185c971f 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -323,7 +323,7 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -343,7 +343,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 078d8699e16d..d5c7f710c314 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -284,13 +284,13 @@ >; }; - pinctrl_gpio_phy9: pinctrl-gpio-phy9 { + pinctrl_gpio_phy9: pinctrl-gpio-phy9grp { fsl,pins = < VF610_PAD_PTB24__GPIO_94 0x219d >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -310,7 +310,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index 22c8f44390a9..344cc2b4d0ad 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -330,7 +330,7 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -350,7 +350,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts index 2c2db47af441..86d32f54c250 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts @@ -50,14 +50,12 @@ }; &iomuxc { - vf610-colibri { - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts index f7474c11aabd..454b484368cb 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts @@ -79,12 +79,10 @@ }; &iomuxc { - vf610-cosmic { - pinctrl_uart3: uart3grp { - fsl,pins = < - VF610_PAD_PTA20__UART3_TX 0x21a2 - VF610_PAD_PTA21__UART3_RX 0x21a1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi index 2bb331a87721..648d219e1d0e 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi @@ -55,3 +55,7 @@ &mscm_ir { interrupt-parent = <&nvic>; }; + +&nvic { + arm,num-irq-priority-bits = <4>; +}; diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi index acccf9a3c898..568d81807c81 100644 --- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi @@ -158,8 +158,8 @@ clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; - dmas = <&edma1 1 12>, <&edma1 1 13>; - dma-names = "rx", "tx"; + dmas = <&edma1 1 13>, <&edma1 1 12>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -172,8 +172,8 @@ clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; - dmas = <&edma1 1 14>, <&edma1 1 15>; - dma-names = "rx", "tx"; + dmas = <&edma1 1 15>, <&edma1 1 14>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -304,7 +304,7 @@ status = "disabled"; }; - iomuxc: iomuxc@40048000 { + iomuxc: pinctrl@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; }; @@ -318,6 +318,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; + ngpios = <32>; }; gpio1: gpio@4004a000 { @@ -329,6 +330,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; + ngpios = <32>; }; gpio2: gpio@4004b000 { @@ -340,6 +342,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; + ngpios = <32>; }; gpio3: gpio@4004c000 { @@ -351,6 +354,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; + ngpios = <32>; }; gpio4: gpio@4004d000 { @@ -362,6 +366,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; + ngpios = <7>; }; anatop: anatop@40050000 { @@ -529,9 +534,8 @@ clocks = <&clks VF610_CLK_DSPI2>; clock-names = "dspi"; spi-num-chipselects = <2>; - dmas = <&edma1 0 10>, - <&edma1 0 11>; - dma-names = "rx", "tx"; + dmas = <&edma1 0 11>, <&edma1 0 10>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -544,8 +548,8 @@ clocks = <&clks VF610_CLK_DSPI3>; clock-names = "dspi"; spi-num-chipselects = <2>; - dmas = <&edma1 0 12>, <&edma1 0 13>; - dma-names = "rx", "tx"; + dmas = <&edma1 0 13>, <&edma1 0 12>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -604,7 +608,7 @@ ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; - reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; @@ -678,7 +682,7 @@ status = "disabled"; }; - nfc: nand@400e0000 { + nfc: nand-controller@400e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-nfc"; @@ -725,13 +729,13 @@ clocks = <&clks VF610_CLK_CAAM>; clock-names = "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; |