diff options
Diffstat (limited to 'Documentation')
25 files changed, 29 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 14cd727d3c4b..f02fd10de604 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -232,7 +232,6 @@ properties: by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' description: u32 value representing CPU capacity (see ./cpu-capacity.txt) in DMIPS/MHz, relative to highest capacity-dmips-mhz diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index 5fe784f487c5..efdf59abb2e1 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -85,7 +85,6 @@ properties: wlf,micd-timeout-ms: description: Timeout for microphone detection, specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" wlf,micd-force-micbias: description: diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index eef614962b10..bf04151b63d2 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -49,7 +49,6 @@ properties: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml index 00a6511354e6..5d3ce641fcde 100644 --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -73,11 +73,9 @@ properties: description: | Temperature sensor trimming factor. It can be used to manually adjust the temperature measurements within 7.130 degrees Celsius. - maxItems: 1 - items: - default: 0 - minimum: 0 - maximum: 7130 + default: 0 + minimum: 0 + maximum: 7130 additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 8020d739a078..1502b22c77cc 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -52,7 +52,6 @@ properties: ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index cc3aa2a5e70b..ff99344788ab 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -39,11 +39,9 @@ properties: i2c-gpio,delay-us: description: delay between GPIO operations (may depend on each platform) - $ref: /schemas/types.yaml#/definitions/uint32 i2c-gpio,timeout-ms: description: timeout to get data - $ref: /schemas/types.yaml#/definitions/uint32 # Deprecated properties, do not use in new device tree sources: gpios: diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index c22b66b6219e..d9293c57f573 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -66,21 +66,18 @@ properties: default: 400000 i2c-sda-hold-time-ns: - maxItems: 1 description: | The property should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer or on Microsemi SoCs. i2c-scl-falling-time-ns: - maxItems: 1 description: | The property should contain the SCL falling time in nanoseconds. This value is used to compute the tLOW period. default: 300 i2c-sda-falling-time-ns: - maxItems: 1 description: | The property should contain the SDA falling time in nanoseconds. This value is used to compute the tHIGH period. diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml index 9475a9e6e920..95774a55629d 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml @@ -23,7 +23,6 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Value in micro Ohms of the shunt resistor connected between the RS+ and RS- inputs, across which the current is measured. Value needed to compute diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 28417b31b558..517e32976c30 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -246,7 +246,6 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml index 692dacd0fee5..7b895784e008 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml @@ -42,7 +42,6 @@ properties: const: 1 ti,channel0-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 0 current in uA. enum: - 0 @@ -51,7 +50,6 @@ properties: - 20 ti,channel3-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 3 current in uA. enum: - 0 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index 626ccb6fe21e..fd4edca34a28 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -46,31 +46,42 @@ properties: two properties must be present: adi,range-microvolt: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Voltage output range specified as <minimum, maximum> - enum: - - [[0, 5000000]] - - [[0, 10000000]] - - [[-5000000, 5000000]] - - [[-10000000, 10000000]] + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 adi,range-microamp: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Current output range specified as <minimum, maximum> - enum: - - [[0, 20000]] - - [[0, 24000]] - - [[4, 24000]] - - [[-20000, 20000]] - - [[-24000, 24000]] - - [[-1000, 22000]] + oneOf: + - items: + - const: 0 + - enum: [20000, 24000] + - items: + - const: 4 + - const: 24000 + - items: + - const: -20000 + - const: 20000 + - items: + - const: -24000 + - const: 24000 + - items: + - const: -1000 + - const: 22000 reset-gpios: true adi,dc-dc-ilim-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 enum: [150000, 200000, 250000, 300000, 350000, 400000] description: | The dc-to-dc converter current limit. diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml index 64b862637039..967778fb0ce8 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml @@ -21,7 +21,6 @@ properties: description: Connected to ADC_RDY pin. maxim,led-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index a771a15f053f..046ace461cc9 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -70,11 +70,9 @@ properties: touchscreen-x-mm: description: horizontal length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-y-mm: description: vertical length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 dependencies: touchscreen-size-x: [ touchscreen-size-y ] diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 186f04ba9357..e674bba52ee9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -259,7 +259,6 @@ properties: waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. - $ref: /schemas/types.yaml#/definitions/uint32 default: 10 supports-cqe: diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 6cd57863c1db..226fb191913d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -41,13 +41,11 @@ properties: description: Delay in ms after powering the card and de-asserting the reset-gpios (if any). - $ref: /schemas/types.yaml#/definitions/uint32 power-off-delay-us: description: Delay in us after asserting the reset-gpios (if any) during power off of the card. - $ref: /schemas/types.yaml#/definitions/uint32 required: - compatible diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 0965f6515f9e..dac4aadb6e2e 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -122,7 +122,6 @@ properties: such as flow control thresholds. rx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. @@ -140,7 +139,6 @@ properties: is used for components that can have configurable fifo sizes. tx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index b2f6083f556a..9ac77b8cb767 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -208,7 +208,6 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index 0c7e2e44793b..c3b4b7543591 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -83,21 +83,18 @@ properties: for each of the battery capacity lookup table. operating-range-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: operating temperature range of a battery items: - description: minimum temperature at which battery can operate - description: maximum temperature at which battery can operate ambient-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of ambient temperature items: - description: alert when ambient temperature is lower than this value - description: alert when ambient temperature is higher than this value alert-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of battery temperature items: - description: alert when battery temperature is lower than this value diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml index 75a56773be4a..813d6afde606 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -50,7 +50,6 @@ properties: maxItems: 1 input-current-limit-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum input current in micro Amps. minimum: 50000 maximum: 500000 diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index 6f2164f7bc57..228018c87bea 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -62,7 +62,6 @@ properties: description: IRQ line information. dlg,irq-polling-delay-passive-ms: - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 1000 maximum: 10000 description: | diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index d3d0dc13dd8b..8850c01bd470 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -72,11 +72,9 @@ properties: startup-delay-us: description: startup time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 off-on-delay-us: description: off delay time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 enable-active-high: description: diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index d30dc045aac6..0ec3551f12dd 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -27,7 +27,6 @@ properties: 1: chargeable quartz-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 description: The capacitive load of the quartz(x-tal), expressed in femto Farad (fF). The default value shall be listed (if optional), @@ -47,7 +46,6 @@ properties: deprecated: true trickle-resistor-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index c23c93b400f0..07fa6d26f2b4 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,14 +88,12 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 3000 required: diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index d116c174b545..70b4a8831073 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -41,14 +41,12 @@ properties: values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not mentioned or if the value is unknown, then micbias resistor is set to 4k. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 2, 4, 8 ] micbias-voltage-m-volts: description: The bias voltage to be used in mVolts. The voltage can take values from 1.25V to 3V by 250mV steps. If this node is not mentioned or the value is unknown, then the value is set to 1.25V. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] lrclk-strength: diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 4e2c26cd981d..e3dfb02f0ca5 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -19,7 +19,6 @@ properties: pattern: "^watchdog(@.*|-[0-9a-f])?$" timeout-sec: - $ref: /schemas/types.yaml#/definitions/uint32 description: Contains the watchdog timeout in seconds. |