diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
16 files changed, 243 insertions, 134 deletions
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml new file mode 100644 index 000000000000..d85d54024b2e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel SPI device + +maintainers: + - Tudor Ambarus <tudor.ambarus@microchip.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - const: atmel,at91rm9200-spi + - items: + - const: microchip,sam9x60-spi + - const: atmel,at91rm9200-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + contains: + const: spi_clk + + clocks: + maxItems: 1 + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for FIFO + capable SPI controllers. + enum: [ 16, 32 ] + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi1: spi@fffcc000 { + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x4000>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + atmel,fifo-size = <32>; + + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&pioC 4 GPIO_ACTIVE_HIGH>; /* CD */ + spi-max-frequency = <25000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt deleted file mode 100644 index e0fa61a1be0c..000000000000 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Energy Micro EFM32 SPI - -Required properties: -- #address-cells: see spi-bus.txt -- #size-cells: see spi-bus.txt -- compatible: should be "energymicro,efm32-spi" -- reg: Offset and length of the register set for the controller -- interrupts: pair specifying rx and tx irq -- clocks: phandle to the spi clock -- cs-gpios: see spi-bus.txt - -Recommended properties : -- energymicro,location: Value to write to the ROUTE register's LOCATION - bitfield to configure the pinmux for the device, see - datasheet for values. - If this property is not provided, keeping what is - already configured in the hardware, so its either the - reset default 0 or whatever the bootloader did. - -Example: - -spi1: spi@4000c400 { /* USART1 */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-spi"; - reg = <0x4000c400 0x400>; - interrupts = <15 16>; - clocks = <&cmu 20>; - cs-gpios = <&gpio 51 1>; // D3 - energymicro,location = <1>; - - ks8851@0 { - compatible = "ks8851"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&boardfpga>; - interrupts = <4>; - }; -}; diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml new file mode 100644 index 000000000000..7797c3123b7e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP spi controller flash interface + +maintainers: + - Nick Hawkins <nick.hawkins@hpe.com> + - Jean-Marie Verdun <verdun@hpe.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: hpe,gxp-spifi + + reg: + items: + - description: cfg registers + - description: data registers + - description: mapped memory + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + + spi@200 { + compatible = "hpe,gxp-spifi"; + reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>; + interrupts = <20>; + interrupt-parent = <&vic0>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + }; + + flash@1 { + reg = <1>; + compatible = "jedec,spi-nor"; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml index 94ef0552bd42..8d2a6c084eab 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml @@ -18,6 +18,7 @@ properties: - items: - enum: - mediatek,mt7629-spi + - mediatek,mt8365-spi - const: mediatek,mt7622-spi - items: - enum: @@ -33,6 +34,7 @@ properties: - items: - enum: - mediatek,mt7986-spi-ipm + - mediatek,mt8188-spi-ipm - const: mediatek,spi-ipm - items: - enum: diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml index 41e60fe4b09f..970b1119898b 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml @@ -23,6 +23,10 @@ allOf: properties: compatible: oneOf: + - enum: + - mediatek,mt8173-nor + - mediatek,mt8186-nor + - mediatek,mt8192-nor - items: - enum: - mediatek,mt2701-nor @@ -30,13 +34,13 @@ properties: - mediatek,mt7622-nor - mediatek,mt7623-nor - mediatek,mt7629-nor - - mediatek,mt8186-nor - - mediatek,mt8192-nor - mediatek,mt8195-nor - - enum: - - mediatek,mt8173-nor - - items: - const: mediatek,mt8173-nor + - items: + - enum: + - mediatek,mt8188-nor + - const: mediatek,mt8186-nor + reg: maxItems: 1 @@ -64,7 +68,6 @@ properties: required: - compatible - reg - - interrupts - clocks - clock-names diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt index a388005842ad..c63ce4cc0a80 100644 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -6,8 +6,13 @@ The NPCM7XX supports three FIU modules, FIU0 and FIUx supports two chip selects, FIU3 support four chip select. +The NPCM8XX supports four FIU modules, +FIU0 and FIUx supports two chip selects, +FIU1 and FIU3 supports four chip selects. + Required properties: - - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC + "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC - #address-cells : should be 1. - #size-cells : should be 0. - reg : the first contains the register location and length, @@ -30,6 +35,12 @@ Aliases: fiu1 represent fiu 3 controller fiu2 represent fiu x controller + In the NPCM8XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 1 controller + fiu2 represent fiu 3 controller + fiu3 represent fiu x controller + Example: fiu3: spi@c00000000 { compatible = "nuvoton,npcm750-fiu"; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml new file mode 100644 index 000000000000..24e0c2181d25 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral properties for Tegra Quad SPI Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + nvidia,tx-clk-tap-delay: + description: + Delays the clock going out to device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + nvidia,rx-clk-tap-delay: + description: + Delays the clock coming in from the device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + +unevaluatedProperties: true + diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml index 0296edd1de22..6b733e5c1163 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -20,6 +20,7 @@ properties: - nvidia,tegra186-qspi - nvidia,tegra194-qspi - nvidia,tegra234-qspi + - nvidia,tegra241-qspi reg: maxItems: 1 @@ -57,27 +58,6 @@ patternProperties: spi-tx-bus-width: enum: [1, 2, 4] - nvidia,tx-clk-tap-delay: - description: - Delays the clock going out to device with this tap value. - Tap value varies based on platform design trace lengths from Tegra - QSPI to corresponding slave device. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 31 - - nvidia,rx-clk-tap-delay: - description: - Delays the clock coming in from the device with this tap value. - Tap value varies based on platform design trace lengths from Tegra - QSPI to corresponding slave device. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 255 - - required: - - reg - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index 78ceb9d67754..2e20ca313ec1 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -45,12 +45,15 @@ properties: - const: rx interconnects: - maxItems: 2 + minItems: 2 + maxItems: 3 interconnect-names: + minItems: 2 items: - const: qup-core - const: qup-config + - const: qup-memory interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index a50f24f9359d..e0a465d70b0a 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -20,7 +20,9 @@ properties: - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 - samsung,s3c6410-spi - samsung,s5pv210-spi # for S5PV210 and S5PC110 + - samsung,exynos4210-spi - samsung,exynos5433-spi + - samsung,exynosautov9-spi - tesla,fsd-spi - const: samsung,exynos7-spi deprecated: true @@ -85,7 +87,9 @@ allOf: properties: compatible: contains: - const: samsung,exynos5433-spi + enum: + - samsung,exynos5433-spi + - samsung,exynosautov9-spi then: properties: clocks: diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index d7e08b03e204..37c3c272407d 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -61,6 +61,8 @@ properties: - const: snps,dw-apb-ssi - description: Intel Keem Bay SPI Controller const: intel,keembay-ssi + - description: Intel Thunder Bay SPI Controller + const: intel,thunderbay-ssi - description: Baikal-T1 SPI Controller const: baikal,bt1-ssi - description: Baikal-T1 System Boot SPI Controller @@ -124,9 +126,16 @@ properties: rx-sample-delay-ns: default: 0 - description: Default value of the rx-sample-delay-ns property. + description: | + Default value of the rx-sample-delay-ns property. This value will be used if the property is not explicitly defined - for a SPI slave device. See below. + for a SPI slave device. + + SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual sample of the + rxd input signal occurs. The "rx_sample_delay" is an optional feature + of the designware controller, and the upper limit is also subject to + controller configuration. patternProperties: "^.*@[0-9a-f]+$": @@ -136,19 +145,6 @@ patternProperties: minimum: 0 maximum: 3 - spi-rx-bus-width: - const: 1 - - spi-tx-bus-width: - const: 1 - - rx-sample-delay-ns: - description: SPI Rx sample delay offset, unit is nanoseconds. - The delay from the default sample time before the actual - sample of the rxd input signal occurs. The "rx_sample_delay" - is an optional feature of the designware controller, and the - upper limit is also subject to controller configuration. - unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index 9787be21318e..82d0ca5c00f3 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -49,6 +49,13 @@ properties: enum: [ 0, 1 ] default: 0 +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index ebb4d5f1cf4f..655713fba7e2 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -95,6 +95,17 @@ patternProperties: type: object $ref: spi-peripheral-props.yaml + properties: + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires inverse clock polarity (CPOL) mode. + required: - compatible - reg @@ -139,9 +150,9 @@ examples: }; flash@2 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <2>, <3>; - stacked-memories = /bits/ 64 <0x10000000 0x10000000>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <2>, <3>; + stacked-memories = /bits/ 64 <0x10000000 0x10000000>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5e32928c4fc3..ce048e782e80 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -34,16 +34,6 @@ properties: description: The device requires 3-wire mode. - spi-cpha: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires shifted clock phase (CPHA) mode. - - spi-cpol: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires inverse clock polarity (CPOL) mode. - spi-cs-high: $ref: /schemas/types.yaml#/definitions/flag description: @@ -71,6 +61,11 @@ properties: description: Delay, in microseconds, after a read transfer. + rx-sample-delay-ns: + description: SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual + sample of the rxd input signal occurs. + spi-tx-bus-width: description: Bus width to the SPI bus used for write transfers. @@ -112,5 +107,6 @@ properties: allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# + - $ref: nvidia,tegra210-quad-peripheral-props.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index ea72c8001256..fafde1c06be6 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -30,6 +30,13 @@ properties: clocks: maxItems: 2 +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt deleted file mode 100644 index 5bb4a8f1df7a..000000000000 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ /dev/null @@ -1,36 +0,0 @@ -Atmel SPI device - -Required properties: -- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi". -- reg: Address and length of the register set for the device -- interrupts: Should contain spi interrupt -- cs-gpios: chipselects (optional for SPI controller version >= 2 with the - Chip Select Active After Transfer feature). -- clock-names: tuple listing input clock names. - Required elements: "spi_clk" -- clocks: phandles to input clocks. - -Optional properties: -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable SPI controllers. - -Example: - -spi1: spi@fffcc000 { - compatible = "atmel,at91rm9200-spi"; - reg = <0xfffcc000 0x4000>; - interrupts = <13 4 5>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi1_clk>; - clock-names = "spi_clk"; - cs-gpios = <&pioB 3 0>; - atmel,fifo-size = <32>; - - mmc-slot@0 { - compatible = "mmc-spi-slot"; - reg = <0>; - gpios = <&pioC 4 0>; /* CD */ - spi-max-frequency = <25000000>; - }; -}; |