diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/amd-xgbe.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/amd-xgbe.txt | 51 |
1 files changed, 48 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt index 26efd526d16c..5dbc55a2db90 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt @@ -1,6 +1,6 @@ * AMD 10GbE driver (amd-xgbe) -Required properties: +Required properties (ethernet device): - compatible: Should be "amd,xgbe-seattle-v1a" - reg: Address and length of the register sets for the device - MAC registers @@ -22,7 +22,7 @@ Required properties: - phy-handle: See ethernet.txt file in the same directory - phy-mode: See ethernet.txt file in the same directory -Optional properties: +Optional properties (ethernet device): - mac-address: mac address to be assigned to the device. Can be overridden by UEFI. - dma-coherent: Present if dma operations are coherent @@ -30,6 +30,35 @@ Optional properties: a unique interrupt for each DMA channel - this requires an additional interrupt be configured for each DMA channel +Required properties (phy device): +- compatible: Should be "amd,xgbe-phy-seattle-v1a" +- reg: Address and length of the register sets for the device + - SerDes Rx/Tx registers + - SerDes integration registers (1/2) + - SerDes integration registers (2/2) +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the amd-xgbe-phy interrupt. + +Optional properties (phy device): +- amd,speed-set: Speed capabilities of the device + 0 - 1GbE and 10GbE (default) + 1 - 2.5GbE and 10GbE + +The following optional properties are represented by an array with each +value corresponding to a particular speed. The first array value represents +the setting for the 1GbE speed, the second value for the 2.5GbE speed and +the third value for the 10GbE speed. All three values are required if the +property is used. +- amd,serdes-blwc: Baseline wandering correction enablement + 0 - Off + 1 - On +- amd,serdes-cdr-rate: CDR rate speed selection +- amd,serdes-pq-skew: PQ (data sampling) skew +- amd,serdes-tx-amp: TX amplitude boost +- amd,serdes-dfe-tap-config: DFE taps available to run +- amd,serdes-dfe-tap-enable: DFE taps to enable + Example: xgbe@e0700000 { compatible = "amd,xgbe-seattle-v1a"; @@ -41,7 +70,23 @@ Example: amd,per-channel-interrupt; clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; clock-names = "dma_clk", "ptp_clk"; - phy-handle = <&phy>; + phy-handle = <&xgbe_phy>; phy-mode = "xgmii"; mac-address = [ 02 a1 a2 a3 a4 a5 ]; }; + + xgbe_phy@e1240800 { + compatible = "amd,xgbe-phy-seattle-v1a"; + reg = <0 0xe1240800 0 0x00400>, + <0 0xe1250000 0 0x00060>, + <0 0xe1250080 0 0x00004>; + interrupt-parent = <&gic>; + interrupts = <0 323 4>; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <30>; + amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; + }; |