1 files changed, 0 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
deleted file mode 100644
index b6a8cc0978cd..000000000000
--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* BCM2835 DMA controller
-
-The BCM2835 DMA controller has 16 channels in total.
-Only the lower 13 channels have an associated IRQ.
-Some arbitrary channels are used by the firmware
-(1,3,6,7 in the current firmware version).
-The channels 0,2 and 3 have special functionality
-and should not be used by the driver.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain the DMA interrupts associated
-		to the DMA channels in ascending order.
-- interrupt-names: Should contain the names of the interrupt
-		   in the form "dmaXX".
-		   Use "dma-shared-all" for the common interrupt line
-		   that is shared by all dma channels.
-- #dma-cells: Must be <1>, the cell in the dmas property of the
-		client device represents the DREQ number.
-- brcm,dma-channel-mask: Bit mask representing the channels
-			 not used by the firmware in ascending order,
-			 i.e. first channel corresponds to LSB.
-
-Example:
-
-dma: dma@7e007000 {
-	compatible = "brcm,bcm2835-dma";
-	reg = <0x7e007000 0xf00>;
-	interrupts = <1 16>,
-		     <1 17>,
-		     <1 18>,
-		     <1 19>,
-		     <1 20>,
-		     <1 21>,
-		     <1 22>,
-		     <1 23>,
-		     <1 24>,
-		     <1 25>,
-		     <1 26>,
-		     /* dma channel 11-14 share one irq */
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     /* unused shared irq for all channels */
-		     <1 28>;
-	interrupt-names = "dma0",
-			  "dma1",
-			  "dma2",
-			  "dma3",
-			  "dma4",
-			  "dma5",
-			  "dma6",
-			  "dma7",
-			  "dma8",
-			  "dma9",
-			  "dma10",
-			  "dma11",
-			  "dma12",
-			  "dma13",
-			  "dma14",
-			  "dma-shared-all";
-
-	#dma-cells = <1>;
-	brcm,dma-channel-mask = <0x7f35>;
-};
-
-
-DMA clients connected to the BCM2835 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-
-Example:
-
-bcm2835_i2s: i2s@7e203000 {
-	compatible = "brcm,bcm2835-i2s";
-	reg = <	0x7e203000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_PCM>;
-
-	dmas = <&dma 2>,
-	       <&dma 3>;
-	dma-names = "tx", "rx";
-};