1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
deleted file mode 100644
index 21a8c23e658f..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2412 Clock Controller
-
-The S3C2412 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2412
-and s3c2413 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be "samsung,s3c2412-clock"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2412.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xti" - crystal input - required,
- - "ext" - external clock source - optional,
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2412-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2412-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			 <&clocks SCLK_UART>;
-	};