1 files changed, 0 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
deleted file mode 100644
index 897eedfa2bc8..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-NVIDIA Tegra Activity Monitor
-
-The activity monitor block collects statistics about the behaviour of other
-components in the system. This information can be used to derive the rate at
-which the external memory needs to be clocked in order to serve all requests
-from the monitored clients.
-
-Required properties:
-- compatible: should be "nvidia,tegra<chip>-actmon"
-- reg: offset and length of the register set for the device
-- interrupts: standard interrupt property
-- clocks: Must contain a phandle and clock specifier pair for each entry in
-clock-names. See ../../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - actmon
-  - emc
-- resets: Must contain an entry for each entry in reset-names. See
-../../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - actmon
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-- interconnects: Should contain entries for memory clients sitting on
-                 MC->EMC memory interconnect path.
-- interconnect-names: Should include name of the interconnect path for each
-                      interconnect entry. Consult TRM documentation for
-                      information about available memory clients, see MEMORY
-                      CONTROLLER section.
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: bitfield indicating SoC speedo ID mask
-- opp-peak-kBps: peak bandwidth of the memory channel
-
-Example:
-	dfs_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp@12750000 {
-			opp-hz = /bits/ 64 <12750000>;
-			opp-supported-hw = <0x000F>;
-			opp-peak-kBps = <51000>;
-		};
-		...
-	};
-
-	actmon@6000c800 {
-		compatible = "nvidia,tegra124-actmon";
-		reg = <0x0 0x6000c800 0x0 0x400>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
-			 <&tegra_car TEGRA124_CLK_EMC>;
-		clock-names = "actmon", "emc";
-		resets = <&tegra_car 119>;
-		reset-names = "actmon";
-		operating-points-v2 = <&dfs_opp_table>;
-		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
-		interconnect-names = "cpu";
-	};