1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
-               "arm,primecell" since this driver is using the AMBA bus
-	       interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
-                using the AMBA framework, the name of the clock providing
-		the interconnect should be "apb_pclk" and the clock is
-		mandatory. The interface between the debug logic and the
-		processor core is clocked by the internal CPU clock, so it
-		is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
-        to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
-                 binding to turn on the debug logic if it has own dedicated
-		 power domain and if necessary to use "cpuidle.off=1" or
-		 "nohlt" in the kernel command line or sysfs node to
-		 constrain idle states to ensure registers in the CPU power
-		 domain are accessible.
-
-Example:
-
-	debug@f6590000 {
-		compatible = "arm,coresight-cpu-debug","arm,primecell";
-		reg = <0 0xf6590000 0 0x1000>;
-		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu0>;
-	};