diff options
-rw-r--r-- | drivers/net/sky2.c | 75 |
1 files changed, 31 insertions, 44 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f4c0bc19b005..5abcf853e98b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2266,8 +2266,8 @@ static void sky2_hw_intr(struct sky2_hw *hw) pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) - printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", - pci_name(hw->pdev), pci_err); + dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n", + pci_err); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PCI_STATUS, @@ -2282,8 +2282,8 @@ static void sky2_hw_intr(struct sky2_hw *hw) pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT); if (net_ratelimit()) - printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", - pci_name(hw->pdev), pex_err); + dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n", + pex_err); /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); @@ -2479,8 +2479,8 @@ static int __devinit sky2_init(struct sky2_hw *hw) hw->chip_id = sky2_read8(hw, B2_CHIP_ID); if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { - printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n", - pci_name(hw->pdev), hw->chip_id); + dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", + hw->chip_id); return -EOPNOTSUPP; } @@ -2488,9 +2488,9 @@ static int __devinit sky2_init(struct sky2_hw *hw) /* This rev is really old, and requires untested workarounds */ if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) { - printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n", - pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], - hw->chip_id, hw->chip_rev); + dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n", + yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], + hw->chip_id, hw->chip_rev); return -EOPNOTSUPP; } @@ -3298,7 +3298,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, struct net_device *dev = alloc_etherdev(sizeof(*sky2)); if (!dev) { - printk(KERN_ERR "sky2 etherdev alloc failed"); + dev_err(&hw->pdev->dev, "etherdev alloc failed"); return NULL; } @@ -3415,8 +3415,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); + dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); return err; } @@ -3427,9 +3426,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) if (!hw->msi) { /* MSI test failed, go back to INTx mode */ - printk(KERN_INFO PFX "%s: No interrupt generated using MSI, " - "switching to INTx mode.\n", - pci_name(pdev)); + dev_info(&pdev->dev, "No interrupt generated using MSI, " + "switching to INTx mode.\n"); err = -EOPNOTSUPP; sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); @@ -3464,15 +3462,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR PFX "%s cannot enable PCI device\n", - pci_name(pdev)); + dev_err(&pdev->dev, "cannot enable PCI device\n"); goto err_out; } err = pci_request_regions(pdev, DRV_NAME); if (err) { - printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", - pci_name(pdev)); + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); goto err_out; } @@ -3483,16 +3479,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, using_dac = 1; err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { - printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA " - "for consistent allocations\n", pci_name(pdev)); + dev_err(&pdev->dev, "unable to obtain 64 bit DMA " + "for consistent allocations\n"); goto err_out_free_regions; } - } else { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - printk(KERN_ERR PFX "%s no usable DMA configuration\n", - pci_name(pdev)); + dev_err(&pdev->dev, "no usable DMA configuration\n"); goto err_out_free_regions; } } @@ -3502,8 +3496,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = -ENOMEM; hw = kzalloc(sizeof(*hw), GFP_KERNEL); if (!hw) { - printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n", - pci_name(pdev)); + dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } @@ -3511,8 +3504,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { - printk(KERN_ERR PFX "%s: cannot map device registers\n", - pci_name(pdev)); + dev_err(&pdev->dev, "cannot map device registers\n"); goto err_out_free_hw; } @@ -3538,7 +3530,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (err) goto err_out_iounmap; - printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n", + dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n", DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0), pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], hw->chip_id, hw->chip_rev); @@ -3561,16 +3553,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = register_netdev(dev); if (err) { - printk(KERN_ERR PFX "%s: cannot register net device\n", - pci_name(pdev)); + dev_err(&pdev->dev, "cannot register net device\n"); goto err_out_free_netdev; } err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, dev->name, hw); if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); + dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); goto err_out_unregister; } sky2_write32(hw, B0_IMSK, Y2_IS_BASE); @@ -3581,18 +3571,15 @@ static int __devinit sky2_probe(struct pci_dev *pdev, struct net_device *dev1; dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default); - if (!dev1) { - printk(KERN_WARNING PFX - "allocation of second port failed\n"); - } - else if (!(err = register_netdev(dev1))) - sky2_show_addr(dev1); - else { - printk(KERN_WARNING PFX - "register of second port failed (%d)\n", err); + if (!dev1) + dev_warn(&pdev->dev, "allocation for second device failed\n"); + else if ((err = register_netdev(dev1))) { + dev_warn(&pdev->dev, + "register of second port failed (%d)\n", err); hw->dev[1] = NULL; free_netdev(dev1); - } + } else + sky2_show_addr(dev1); } setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw); @@ -3730,7 +3717,7 @@ static int sky2_resume(struct pci_dev *pdev) sky2_idle_start(hw); return 0; out: - printk(KERN_ERR PFX "%s: resume failed (%d)\n", pci_name(pdev), err); + dev_err(&pdev->dev, "resume failed (%d)\n", err); pci_disable_device(pdev); return err; } |