Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

4 files changed, 48 insertions, 32 deletions

diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index ca74dce36706..4658e7801b42 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -42,7 +42,6 @@ struct pxa2xx_spi_chip {
 	u8 rx_threshold;
 	u8 dma_burst_size;
 	u32 timeout;
-	int gpio_cs;
 };
 
 #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
index 440a71593162..9b8bb22d5b0c 100644
--- a/include/linux/spi/s3c24xx.h
+++ b/include/linux/spi/s3c24xx.h
@@ -10,14 +10,9 @@
 #define __LINUX_SPI_S3C24XX_H __FILE__
 
 struct s3c2410_spi_info {
-	int			 pin_cs;	/* simple gpio cs */
 	unsigned int		 num_cs;	/* total chipselects */
 	int			 bus_num;       /* bus number to use. */
-
 	unsigned int		 use_fiq:1;	/* use fiq */
-
-	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
-	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
 extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on);
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 85e2ff7b840d..2ba044d0d5e5 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -89,6 +89,7 @@ enum spi_mem_data_dir {
  * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
  * @data.buswidth: number of IO lanes used to send/receive the data
  * @data.dtr: whether the data should be sent in DTR mode or not
+ * @data.ecc: whether error correction is required or not
  * @data.dir: direction of the transfer
  * @data.nbytes: number of data bytes to send/receive. Can be zero if the
  *		 operation does not involve transferring data
@@ -119,6 +120,7 @@ struct spi_mem_op {
 	struct {
 		u8 buswidth;
 		u8 dtr : 1;
+		u8 ecc : 1;
 		enum spi_mem_data_dir dir;
 		unsigned int nbytes;
 		union {
@@ -286,6 +288,19 @@ struct spi_controller_mem_ops {
 };
 
 /**
+ * struct spi_controller_mem_caps - SPI memory controller capabilities
+ * @dtr: Supports DTR operations
+ * @ecc: Supports operations with error correction
+ */
+struct spi_controller_mem_caps {
+	bool dtr;
+	bool ecc;
+};
+
+#define spi_mem_controller_is_capable(ctlr, cap)	\
+	((ctlr)->mem_caps && (ctlr)->mem_caps->cap)
+
+/**
  * struct spi_mem_driver - SPI memory driver
  * @spidrv: inherit from a SPI driver
  * @probe: probe a SPI memory. Usually where detection/initialization takes
@@ -319,10 +334,6 @@ void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
 
 bool spi_mem_default_supports_op(struct spi_mem *mem,
 				 const struct spi_mem_op *op);
-
-bool spi_mem_dtr_supports_op(struct spi_mem *mem,
-			     const struct spi_mem_op *op);
-
 #else
 static inline int
 spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
@@ -345,13 +356,6 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
 {
 	return false;
 }
-
-static inline
-bool spi_mem_dtr_supports_op(struct spi_mem *mem,
-			     const struct spi_mem_op *op)
-{
-	return false;
-}
 #endif /* CONFIG_SPI_MEM */
 
 int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 7ab3fed7b804..d361ba26203b 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -16,6 +16,7 @@
 #include <linux/gpio/consumer.h>
 
 #include <uapi/linux/spi/spi.h>
+#include <linux/acpi.h>
 
 struct dma_chan;
 struct software_node;
@@ -23,6 +24,7 @@ struct ptp_system_timestamp;
 struct spi_controller;
 struct spi_transfer;
 struct spi_controller_mem_ops;
+struct spi_controller_mem_caps;
 
 /*
  * INTERFACES between SPI master-side drivers and SPI slave protocol handlers,
@@ -136,9 +138,8 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
  *	for driver coldplugging, and in uevents used for hotplugging
  * @driver_override: If the name of a driver is written to this attribute, then
  *	the device will bind to the named driver and only the named driver.
- * @cs_gpio: LEGACY: gpio number of the chipselect line (optional, -ENOENT when
- *	not using a GPIO line) use cs_gpiod in new drivers by opting in on
- *	the spi_master.
+ *	Do not set directly, because core frees it; use driver_set_override() to
+ *	set or clear it.
  * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when
  *	not using a GPIO line)
  * @word_delay: delay to be inserted between consecutive
@@ -185,7 +186,6 @@ struct spi_device {
 	void			*controller_data;
 	char			modalias[SPI_NAME_SIZE];
 	const char		*driver_override;
-	int			cs_gpio;	/* LEGACY: chip select gpio */
 	struct gpio_desc	*cs_gpiod;	/* chip select gpio desc */
 	struct spi_delay	word_delay; /* inter-word delay */
 	/* CS delays */
@@ -280,7 +280,7 @@ struct spi_message;
 struct spi_driver {
 	const struct spi_device_id *id_table;
 	int			(*probe)(struct spi_device *spi);
-	int			(*remove)(struct spi_device *spi);
+	void			(*remove)(struct spi_device *spi);
 	void			(*shutdown)(struct spi_device *spi);
 	struct device_driver	driver;
 };
@@ -349,6 +349,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @max_message_size: function that returns the max message size for
  *	a &spi_device; may be %NULL, so the default %SIZE_MAX will be used.
  * @io_mutex: mutex for physical bus access
+ * @add_lock: mutex to avoid adding devices to the same chipselect
  * @bus_lock_spinlock: spinlock for SPI bus locking
  * @bus_lock_mutex: mutex for exclusion of multiple callers
  * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
@@ -363,6 +364,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @transfer: adds a message to the controller's transfer queue.
  * @cleanup: frees controller-specific state
  * @can_dma: determine whether this controller supports DMA
+ * @dma_map_dev: device which can be used for DMA mapping
  * @queued: whether this controller is providing an internal message queue
  * @kworker: pointer to thread struct for message pump
  * @pump_messages: work struct for scheduling work to the message pump
@@ -373,7 +375,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @cur_msg_prepared: spi_prepare_message was called for the currently
  *                    in-flight message
  * @cur_msg_mapped: message has been mapped for DMA
- * @last_cs_enable: was enable true on the last call to set_cs.
+ * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
+ *           selected
  * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
  * @xfer_completion: used by core transfer_one_message()
  * @busy: message pump is busy
@@ -415,19 +418,15 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @mem_ops: optimized/dedicated operations for interactions with SPI memory.
  *	     This field is optional and should only be implemented if the
  *	     controller has native support for memory like operations.
+ * @mem_caps: controller capabilities for the handling of memory operations.
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
- *	CS number. Any individual value may be -ENOENT for CS lines that
- *	are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
- *	in new drivers.
  * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS
  *	number. Any individual value may be NULL for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
  * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab
- *	GPIO descriptors rather than using global GPIO numbers grabbed by the
- *	driver. This will fill in @cs_gpiods and @cs_gpios should not be used,
- *	and SPI devices will have the cs_gpiod assigned rather than cs_gpio.
+ *	GPIO descriptors. This will fill in @cs_gpiods and SPI devices will have
+ *	the cs_gpiod assigned if a GPIO line is found for the chipselect.
  * @unused_native_cs: When cs_gpiods is used, spi_register_controller() will
  *	fill in this field with the first unused native CS, to be used by SPI
  *	controller drivers that need to drive a native CS when using GPIO CS.
@@ -611,7 +610,7 @@ struct spi_controller {
 	bool				auto_runtime_pm;
 	bool                            cur_msg_prepared;
 	bool				cur_msg_mapped;
-	bool				last_cs_enable;
+	char				last_cs;
 	bool				last_cs_mode_high;
 	bool                            fallback;
 	struct completion               xfer_completion;
@@ -639,9 +638,9 @@ struct spi_controller {
 
 	/* Optimized handlers for SPI memory-like operations. */
 	const struct spi_controller_mem_ops *mem_ops;
+	const struct spi_controller_mem_caps *mem_caps;
 
 	/* gpio chip select */
-	int			*cs_gpios;
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
 	s8			unused_native_cs;
@@ -759,6 +758,13 @@ extern int devm_spi_register_controller(struct device *dev,
 					struct spi_controller *ctlr);
 extern void spi_unregister_controller(struct spi_controller *ctlr);
 
+#if IS_ENABLED(CONFIG_ACPI)
+extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
+						struct acpi_device *adev,
+						int index);
+int acpi_spi_count_resources(struct acpi_device *adev);
+#endif
+
 /*
  * SPI resource management while processing a SPI message
  */
@@ -1452,8 +1458,20 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device. This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
  */
 extern struct spi_device *
+spi_alloc_device(struct spi_controller *ctlr);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
 spi_new_device(struct spi_controller *, struct spi_board_info *);
 
 extern void spi_unregister_device(struct spi_device *spi);