ARM: samsung: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the samsung include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org

1 files changed, 52 insertions, 0 deletions

diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
new file mode 100644
index 000000000000..c42d31711944
--- /dev/null
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -0,0 +1,52 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect:1;
+	unsigned int	no_detect:1;
+	unsigned int	wprotect_invert:1;
+	unsigned int	detect_invert:1;	/* set => detect active high */
+	unsigned int	use_dma:1;
+
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	void		(*set_power)(unsigned char power_mode,
+				     unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */