diff options
| author | Niklas Cassel <niklas.cassel@wdc.com> | 2022-12-29 18:00:01 +0100 |
|---|---|---|
| committer | Damien Le Moal <damien.lemoal@opensource.wdc.com> | 2023-01-04 13:39:38 +0900 |
| commit | 87aab3c4cd59aef42fe280fece2be8b8156b99e0 (patch) | |
| tree | 5c3da57a8b30bae4cac4021cb8720c1fe0eadd37 /include/linux/libata.h | |
| parent | 7affcded810b7fa9b2e935fff5faa12af2b67033 (diff) | |
| download | lwn-87aab3c4cd59aef42fe280fece2be8b8156b99e0.tar.gz lwn-87aab3c4cd59aef42fe280fece2be8b8156b99e0.zip | |
ata: libata: move NCQ related ATA_DFLAGs
ata_dev_configure() starts off by clearing all flags in ATA_DFLAG_CFG_MASK:
dev->flags &= ~ATA_DFLAG_CFG_MASK;
ata_dev_configure() then calls ata_dev_config_lba() which calls
ata_dev_config_ncq().
ata_dev_config_ncq() will set the correct ATA_DFLAGs depending on what is
actually supported.
Since these flags are set by ata_dev_configure(), they should be in
ATA_DFLAG_CFG_MASK and not in ATA_DFLAG_INIT_MASK.
ATA_DFLAG_NCQ_PRIO_ENABLED is set via sysfs, is should therefore not be in
ATA_DFLAG_CFG_MASK. It also cannot be in ATA_DFLAG_INIT_MASK, because
ata_eh_schedule_probe() calls ata_dev_init(), which will clear all flags in
ATA_DFLAG_INIT_MASK.
This means that ATA_DFLAG_NCQ_PRIO_ENABLED (the value the user sets via
sysfs) would get silently cleared if ata_eh_schedule_probe() is called.
While that should only happen in certain circumstances, it still doesn't
seem right that it can get silently cleared.
(ata_dev_config_ncq_prio() will still clear the ATA_DFLAG_NCQ_PRIO_ENABLED
flag if ATA_DFLAG_NCQ_PRIO is suddenly no longer supported after a
revalidation.)
Because of this, move ATA_DFLAG_NCQ_PRIO_ENABLED to be outside of both
ATA_DFLAG_CFG_MASK and ATA_DFLAG_INIT_MASK.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Diffstat (limited to 'include/linux/libata.h')
| -rw-r--r-- | include/linux/libata.h | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/include/linux/libata.h b/include/linux/libata.h index f54e02dadc6f..3b7f5d9e2f87 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -91,22 +91,21 @@ enum { ATA_DFLAG_AN = (1 << 7), /* AN configured */ ATA_DFLAG_TRUSTED = (1 << 8), /* device supports trusted send/recv */ ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */ - ATA_DFLAG_CFG_MASK = (1 << 12) - 1, + ATA_DFLAG_NCQ_SEND_RECV = (1 << 11), /* device supports NCQ SEND and RECV */ + ATA_DFLAG_NCQ_PRIO = (1 << 12), /* device supports NCQ priority */ + ATA_DFLAG_CFG_MASK = (1 << 13) - 1, - ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */ - ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ + ATA_DFLAG_PIO = (1 << 13), /* device limited to PIO mode */ + ATA_DFLAG_NCQ_OFF = (1 << 14), /* device limited to non-NCQ mode */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ - ATA_DFLAG_NCQ_SEND_RECV = (1 << 19), /* device supports NCQ SEND and RECV */ - ATA_DFLAG_NCQ_PRIO = (1 << 20), /* device supports NCQ priority */ - ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 21), /* Priority cmds sent to dev */ - ATA_DFLAG_INIT_MASK = (1 << 24) - 1, + ATA_DFLAG_INIT_MASK = (1 << 19) - 1, + ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 19), /* Priority cmds sent to dev */ ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), - ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */ |